How to clear the contents of table control
Hi All,
How to clear the contents that are present in a Table control. If there is any code Please Let me know.
I will assign full marks to the correct code.
Pradeep Kumar Kota.
Hi
U need to clear the contenents of internal table used to store the record displayed by table control.
Every time the PBO is triggered the table control is automatically cleared, so you need only not to transfer any data from internal table to table control.
So you should show how your PBO if you want a right answer.
Max
Similar Messages
-
Reg:How to delete the column in table control also from database table.
Hi Experts,
Once again thank u all for giving the responses.
one more doubt is how to delete the columns of table control and also the record shold delete from ztable.
With Regards,
Saroja.P.Hi,
If you want to delete the rows in the table control and simultaneously delete it from the database table, then you can implement a 'DELETE' functionality specific to your table control. Have a MARK field (you will find that in the screen attributes of the table control -> give a name for the MARK field, you will find an additional MARK column at the beginning of your table control). You can check whatever rows you want to delete from the table control, call the delete module.
"This portion of code inside the LOOP...ENDLOOP.
IF sy-ucomm eq 'F_DELETE'.
gt_itab2-check = mark. " Store the MARK field status into your internal table's correspoding field 'check'
MODIFY gt_itab INDEX tabcontrol-current_line.
ENDIF.
iF sy-ucomm eq 'DELETE1'.
DELETE gt_itab WHERE check eq 'X'. "Your internal table does not have rows that you want to delete
ENDIF.
Now you can modify your database table using the MODIFY statement.
MODIFY ZDB FROM TABLE gt_itab. -
How to clear the contents of a table
I was using a 'build table' to collect some datas and pass it to an 'Express table'.
what are the possible options to clear the contents of that table?
How can i clear the contents using a 'button'?Build table function has an additional input called 'Reset'
Attach a boolean to it.
On front panel, set the boolean's mechanical action as 'latch when released'
Look at attached vi
Regards,
Dev
Message Edited by devchander on 08-06-2007 08:02 AM
Attachments:
reset table.vi 57 KB -
How to delete and refresh the contents of table control..
how to delete particular row in table control .consider we r having three rows i wish to delete the third row.while on debugging the third row gets deleted successfully.but that is displayed in table control.then how to refresh the table control...
hi,
try like this....
USER_COMMAND of PAI
MODULE user_command_9000 INPUT.
CASE ok_code.
WHEN 'BACK' OR 'UP' OR 'CANCEL'.
LEAVE PROGRAM.
WHEN 'DEL'.
GET CURSOR LINE lin_no.
f1 = 1.
ENDCASE.
ENDMODULE. " USER_COMMAND_9000 INPUT
and in Module in which u fetching data in PBO, write like
MODULE get_data OUTPUT.
IF f1 <> 1.
SELECT kunnr name1
INTO CORRESPONDING FIELDS OF TABLE mytab
FROM kna1.
ENDIF.
IF f1 = 1.
DELETE mytab INDEX lin_no.
FREE lin_no.
FREE f1.
ENDIF.
ENDMODULE. " get_data OUTPUT
reward if useful... -
How to delete the row in table control with respect to one field in module pool programming?
Hi,
Can I know the way to delete the row in table control with respect to one field in module pool programming
Regards
Darshan MSHI,
I want to delete the row after the display of table control. I have created push button as delete row. If I click on this push button, the selected row should get deleted.
I have written this code,
module USER_COMMAND_9000 input.
DATA OK_CODE TYPE SY-UCOMM.
OK_CODE = SY-UCOMM.
CASE OK_CODE.
WHEN 'DELETE'.
LOOP AT lt_source INTO ls_source WHERE mark = 'X'.
APPEND LS_SOURCE TO LT_RESTORE.
DELETE TABLE LT_SOURCE FROM LS_SOURCE.
SOURCE-LINES = SOURCE-LINES - 1.
ENDLOOP.
But I'm unable to delete the selected rows, It is getting deleted the last rows eventhough I select the other row.
So I thought of doing with respect to the field. -
HOW TO MAKE THE FIELDS ON TABLE CONTROL SCREEN FIXED!!
Dear all,
Can you please tell me as to how to make the fields on the table control screen fixed (not respond to the scroll bar) i.e. simillar to MC88 screen , the first two fields are fixed and don't respond to the scroll.
Please Help!!!!
VjHi
In TC, goto attributes and set 'Fixed columns' as 2. This will fix the first 2 columns.
Regards
Navneet -
How to color the records in table control.
Hi,
I have created a table control in which i want to add colors to it.
It is possible in reporting,but is it possible in table control.You can do it,
Just follow the code,...
In PBO...
PROCESS BEFORE OUTPUT.
MODULE STATUS.
LOOP WITH CONTROL TABCTRL.
MODULE MODIFY_100.
ENDLOOP.
MODULE MODIFY_100 OUTPUT.
DATA wa_tabctrl TYPE cxtab_column .
LOOP AT TABCTRL-COLS INTO WA_TABCTRL.
IF WA_TABCTRL-INDEX = '1'. "1- Your Respective Field Column's index
WA_TABCTRL-SCREEN-COLOR = '2'. "Give your colour
MODIFY TABCTRL-COLS FROM WA_TABCTRL.
ENDIF.
ENDLOOP.
ENDMODULE. -
SAPUI5: How to set the appearance of Table control?
Hi there,
I have a table on my app UI. Now I want simply show the table grid lines (currently, the vertical lines between columns are not shown). Any idea?
Furthermore, how to set the width of the bord lines or even teh color of the lines?
Thanks very much in advance!
Dong ZhuHi,
The demo link provided by Chandra uses Blue Crystal theme, hence it shows the vertical lines between the columns of the table. If you are using Gold Reflection theme, then to get the vertical lines, you need to play with CSS. Add the below snippet of CSS between <head></head> of your html file.
<style>
.sapUiTableTr>td {
border-right: 1px solid #cccccc !important;
</style>
Thanks & Regards,
Vishwa -
WD ABAP: How to get the contents of selected table lines?
Hi,
I'm trying to figure out how to get the contents of table lines back from the UI. I display a table with several lines of data. The user selects some rows. I want to move the contents of the selected rows to another table. I have a context attribute, say DATA, with attributes FIELD1... FIELDn, using a DDIC structure. These are bound to the table UI element and the corresponding table columns. To get the selected rows, I use wd_context->get_selected_elements(). This works, but what I get from this method is references to if_wd_context_element. How do I know which row (row number = ?) this corresponds to? And how do I get the actual data? I want a structure with FIELD1 = value1 FIELD2 = value2 etc. My context attributes FIELD refer to table columns, but I'm looking for the table line...
Can somebody help me?
Thanks,
IraHi Ira,
wd_context->get_selected_elements() returns WDR_CONTEXT_ELEMENT_SET which is a table type of IF_WD_CONTEXT_ELEMENT. You can loop through the WDR_CONTEXT_ELEMENT_SET, get into variable say node_elelement which is of type ref to If_Wd_Context_Element. Then you could use the method GET_STATIC_ATTRIBUTES of If_Wd_Context_Element which returns a structure with values of all the attributes in the selected row.
If you need the row number, while populating the node you could have an additional attribute called rowno and populate it correctly. When you select the data using method GET_STATIC_ATTRIBUTES, you would get the appropriate row number.
Regards,
Srini. -
How to clear the rows in a jTable
Can anyone tell me how to clear the contents of all the rows in a jTable?
This is how I did. Posting the same.
jTable1.selectAll();
int[] array = jTable1.getSelectedRows();
for(int i=array.length-1;i>=0;i--)
DefaultTableModel model = (DefaultTableModel)jTable1.getModel();
model.removeRow(i);
Regards. -
How to clear the table control content
Hi All,
I am doing BDC for cost estimate change. In this the transaction KKPB contains table control. So when ever i process with particular cost estimate, i need to fill the table control with the values. Here when i am doing the BDC for change, i need to clear all the contents of the table control then i need to fill with new entries.
So my problems is how to clear the table control entriee?? please help me in this??
Many Thanks,
Raghu.Hi this might help u.
Check the below link.
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
THis is example to upload the Bank details of the Vendor which has the TC.
REPORT zprataptable2
NO STANDARD PAGE HEADING LINE-SIZE 255.
DATA : BEGIN OF itab OCCURS 0,
i1 TYPE i,
lifnr LIKE rf02k-lifnr,
bukrs LIKE rf02k-bukrs,
ekorg LIKE rf02k-ekorg,
ktokk LIKE rf02k-ktokk,
anred LIKE lfa1-anred,
name1 LIKE lfa1-name1,
sortl LIKE lfa1-sortl,
land1 LIKE lfa1-land1,
akont LIKE lfb1-akont,
fdgrv LIKE lfb1-fdgrv,
waers LIKE lfm1-waers,
END OF itab.
DATA : BEGIN OF jtab OCCURS 0,
j1 TYPE i,
banks LIKE lfbk-banks,
bankl LIKE lfbk-bankl,
bankn LIKE lfbk-bankn,
END OF jtab.
DATA : cnt(4) TYPE n.
DATA : fdt(20) TYPE c.
DATA : c TYPE i.
INCLUDE bdcrecx1.
START-OF-SELECTION.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = 'C:\first1.txt'
filetype = 'DAT'
TABLES
data_tab = itab.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = 'C:\second.txt'
filetype = 'DAT'
TABLES
data_tab = jtab.
LOOP AT itab.
PERFORM bdc_dynpro USING 'SAPMF02K' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-KTOKK'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RF02K-LIFNR'
itab-lifnr.
PERFORM bdc_field USING 'RF02K-BUKRS'
itab-bukrs.
PERFORM bdc_field USING 'RF02K-EKORG'
itab-ekorg.
PERFORM bdc_field USING 'RF02K-KTOKK'
itab-ktokk.
PERFORM bdc_dynpro USING 'SAPMF02K' '0110'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-LAND1'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFA1-ANRED'
itab-anred.
PERFORM bdc_field USING 'LFA1-NAME1'
itab-name1.
PERFORM bdc_field USING 'LFA1-SORTL'
itab-sortl.
PERFORM bdc_field USING 'LFA1-LAND1'
itab-land1.
PERFORM bdc_dynpro USING 'SAPMF02K' '0120'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-KUNNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
cnt = 0.
LOOP AT jtab WHERE j1 = itab-i1.
cnt = cnt + 1.
CONCATENATE 'LFBK-BANKS(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-banks.
CONCATENATE 'LFBK-BANKL(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-bankl.
CONCATENATE 'LFBK-BANKN(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-bankn.
IF cnt = 5.
cnt = 0.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=P+'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(02)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
ENDIF.
ENDLOOP.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0210'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-FDGRV'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFB1-AKONT'
itab-akont.
PERFORM bdc_field USING 'LFB1-FDGRV'
itab-fdgrv.
PERFORM bdc_dynpro USING 'SAPMF02K' '0215'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-ZTERM'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0220'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB5-MAHNA'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0310'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFM1-WAERS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFM1-WAERS'
itab-waers.
PERFORM bdc_dynpro USING 'SAPMF02K' '0320'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-LIFNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPLSPO1' '0300'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=YES'.
PERFORM bdc_transaction USING 'XK01'.
ENDLOOP.
PERFORM close_group.
Header file:
1 63190 0001 0001 0001 mr bal188 b in 31000 a1 inr
2 63191 0001 0001 0001 mr bal189 b in 31000 a1 inr
TC file:
1 in sb 11000
1 in sb 12000
1 in sb 13000
1 in sb 14000
1 in sb 15000
1 in sb 16000
1 in sb 17000
1 in sb 18000
1 in sb 19000
1 in sb 20000
1 in sb 21000
1 in sb 22000
2 in sb 21000
2 in sb 22000
REPORT zmm_pr_upload_mat
NO STANDARD PAGE HEADING
LINE-SIZE 255.
Standard Include for Selection Screen
INCLUDE bdcrecx1.
Internal Table for Upload Data
DATA: BEGIN OF i_pr OCCURS 0,
Header Screen
sno(3), " SNo
bsart(004), " PR Type
epstp(001), " Item Category
knttp(001), " Account Assignment
eeind(010), " Delivery Date
lpein(001), " Category of Del Date
werks(004), " Plant
lgort(004), " Storage Location
ekgrp(003), " Purchasing Group
matkl(009), " Material Group
bednr(010), " Tracking No
afnam(012), " Requisitioner
Item Details
matnr(018), " Material No
menge(017), " Quantity
badat(010),
frgdt(010),
preis(014), " Valuation Price
waers(005), " Currency
peinh(005),
wepos(001),
repos(001),
sakto(010), " GL Account
kostl(010), " Cost Center
bnfpo(005),
END OF i_pr.
Internal Table for header Data
DATA: BEGIN OF it_header OCCURS 0,
sno(3), " SNo
bsart(004), " PR Type
epstp(001), " Item Category
knttp(001), " Account Assignment
eeind(010), " Delivery Date
werks(004), " Plant
lgort(004), " Storage Location
ekgrp(003), " Purchasing Group
matkl(009), " Material Group
bednr(010), " Tracking No
afnam(012), " Requisitioner
END OF it_header.
Internal Table for Item Data
DATA: BEGIN OF it_item OCCURS 0,
sno(3), " SNo
matnr(018), " Material No
menge(017), " Quantity
preis(014), " Valuation Price
sakto(010), " GL Account
kostl(010), " Cost Center
END OF it_item.
Data Variables & Constants
CONSTANTS : c_x VALUE 'X'. " Flag
DATA : v_l(2), " Counter
v_rowno(5), " Row No
v_2(2), " Counter
v_rows LIKE sy-srows, " Rows in TC
v_field(45). " String
Parameters
PARAMETERS: p_file LIKE ibipparms-path. " Filename
At selection-screen on Value Request for file Name
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
Get the F4 Values for the File
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
IMPORTING
file_name = p_file.
Start of Selection
START-OF-SELECTION.
Open the BDC Session
PERFORM open_group.
Upload the File into internal Table
CALL FUNCTION 'UPLOAD'
EXPORTING
filename = p_file
filetype = 'DAT'
TABLES
data_tab = i_pr
EXCEPTIONS
conversion_error = 1
invalid_table_width = 2
invalid_type = 3
no_batch = 4
unknown_error = 5
gui_refuse_filetransfer = 6
OTHERS = 7.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SORT i_pr BY sno.
LOOP AT i_pr.
MOVE-CORRESPONDING i_pr TO it_item.
APPEND it_item.
CLEAR it_item.
AT END OF sno.
READ TABLE i_pr INDEX sy-tabix.
MOVE-CORRESPONDING i_pr TO it_header.
APPEND it_header.
CLEAR it_header.
ENDAT.
ENDLOOP.
SORT it_header BY sno.
SORT it_item BY sno.
v_rows = sy-srows - 6.
Upload the Data from Internal Table
LOOP AT it_header.
Header Data
PERFORM bdc_dynpro USING 'SAPMM06B' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'EBAN-BEDNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'EBAN-BSART'
it_header-bsart.
PERFORM bdc_field USING 'RM06B-EPSTP'
it_header-epstp.
PERFORM bdc_field USING 'EBAN-KNTTP'
it_header-knttp.
PERFORM bdc_field USING 'RM06B-EEIND'
it_header-eeind.
PERFORM bdc_field USING 'RM06B-LPEIN'
it_header-lpein.
PERFORM bdc_field USING 'EBAN-WERKS'
it_header-werks.
PERFORM bdc_field USING 'EBAN-LGORT'
it_header-lgort.
PERFORM bdc_field USING 'EBAN-EKGRP'
it_header-ekgrp.
PERFORM bdc_field USING 'EBAN-MATKL'
it_header-matkl.
PERFORM bdc_field USING 'EBAN-BEDNR'
it_header-bednr.
PERFORM bdc_field USING 'EBAN-AFNAM'
it_header-afnam.
Item Details
v_l = 0.
To add no. of rows
v_2 = 0 .
As the screen is showing 13 rows defaulted to 130
v_rowno = 130 .
LOOP AT it_item WHERE sno = it_header-sno.
v_l = v_l + 1.
IF v_l = 14 .
IF v_2 = 12 .
v_2 = 12 .
v_l = 2 .
From second time onwards it is displaying 12 rows only
v_rowno = v_rowno + 120 .
PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RM06B-BNFPO'.
PERFORM bdc_field USING 'RM06B-BNFPO'
v_rowno.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
ELSE.
V_2 initialized to 12 for second screen purpose
v_2 = 12 .
v_l = 2 .
PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RM06B-BNFPO'.
PERFORM bdc_field USING 'RM06B-BNFPO'
v_rowno .
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
ENDIF.
ENDIF.
PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
CLEAR v_field.
CONCATENATE 'EBAN-MATNR(' v_l ')' INTO v_field.
PERFORM bdc_field USING v_field it_item-matnr.
CLEAR v_field.
CONCATENATE 'EBAN-MENGE(' v_l ')' INTO v_field.
PERFORM bdc_field USING v_field it_item-menge.
PERFORM bdc_dynpro USING 'SAPMM06B' '0102'.
PERFORM bdc_field USING 'BDC_CURSOR'
'EBAN-PREIS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'EBAN-PREIS'
it_item-preis.
PERFORM bdc_dynpro USING 'SAPMM06B' '0505'.
PERFORM bdc_field USING 'BDC_CURSOR'
'EBKN-SAKTO'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTE'.
PERFORM bdc_field USING 'EBKN-SAKTO'
it_item-sakto.
Cost Center
PERFORM bdc_dynpro USING 'SAPLKACB' '0002'.
PERFORM bdc_field USING 'BDC_CURSOR'
'COBL-KOSTL'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTE'.
PERFORM bdc_field USING 'COBL-KOSTL'
it_item-kostl.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTE'.
ENDLOOP.
PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RM06B-BNFPO'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=BU'.
Call The Transaction
PERFORM bdc_transaction USING 'ME51'.
ENDLOOP.
Close the BDC Session
PERFORM close_group.
with regards,
Hema Sundara. -
HOW TO MAKE THE CONTENT OF THE TABLE PRINT IN A TABLE CONTROL SCREEN?
Can any one tell me how to make the content of the table control print in a table control screen!!?
Please help!!
I have to make the contents of a table in the table control screen print ? any idea
Regards,
VjPlease refer to Demo Program,
DEMO_DYNPRO_TABCONT_LOOP
Its very clear.
Shreekant -
How to clear the table contents for the new selection values?
Hi,
Im developing some very basic web dynpro applications.I have created one application to demonstrate use of SERVICE CALL.Now in one of the COntext Nodes,I have one attributes as TABLE.I have 2 input fields and when i enter any sel critteria in these 2 fields,the table is populated accordingly.Now when i change the value in the input fields,the new output gets appended in the output TABLE.How do I clear the contents of the OUTPUT table attribute in the method?
Can someone tell me the common methods used with context nodes like REFRESHING,CLEARING etc?How do I know which methods to call for what action of the nodes ...like for binding internal table to any context node we use the method BIND_TABLE...
Any inputs will be highly appreciated.
Thanks!
BR,
SRM tech.Hi,
To clear the contents of the node, use invalidate method.
data: l_node type ref to if_wd_context_node.
l_node = wd_context->get_child_node( 'NODENAME' ).
l_node->invalidate( ). " all the data in the node will be cleared
To clear a single attribute you can use set_attribute_null.
Regards,
Radhika. -
How to transfer the contents of a line of a table control to second screen?
Hi,
I have a table control and I have entered some contents in one line of a table control .
When i click on this line and then click on the detail button on the screen , it should take me to another screen and whatever I have entered in the table control should be transferred to the second screen .
Please could anyone help me out with this .
Regards,
Sushanth H.S.Hi
U need to get the index of the line of table control by command GET CURSOR:
PROCESS PAI.
LOOP AT ITAB.
MODULE GET_CURSOR.
MODULE MODIFY_ITAB.
ENDLOOP.
MODULE USER_COMMAND.
Module to pick up the selected line:
MODULE GET_CURSOR.
GET CURSOR LINE VN_LINE.
ENDMODULE.
Module to transfer the data from table control to internal table:
MODULE MODIFY_ITAB.
ITAB-FIELD1 = <FIELD OF TABLE CONTROL>.
MODIFY ITAB INDEX <TABLE CONTROL>-CURRENT_LINE.
ENDMODULE.
U should considere the variable line has the value of the index of the line of table control, so u need to calculate the number of the corresponding line of internal table:
MODULE USER_COMMAND.
CASE OK_CODE.
WHEN 'DETAIL'.
* Calculate the line of internal table:
VN_LINE = <TABLE CONTROL>-TOP_LINE + VN_LINE - 1.
* Read the data
READ TABLE ITAB INDEX VN_LINE.
* Transfer the data to the output structure of the new screen
<STRUCTURE>-FIELD1 = ITAB-FIELD1.
* Call the new screen
SET SCREEN <NEW SCREEN>.
LEAVE SCREEN.
Max -
How to Display the content of Excel file into Webdynpro Table
Hi Experts
I am following the Blog to upload a file in to the webdynpro context,but my problem is after uploading a excel file i need to extract the content from that Excel file and that content should be displayed in the webdynpro table.Can any body please guide me how to read the content from excel and to Display in the Table.
Thanks and Regards
KalyanHI,
Take for example, if Excel file contains 4 fields,
Add jxl.jar to JavaBuild path and Use this snippet
File f=new File("sample.xls");
Workbook w=Workbook.getWorkbook(f);
Sheet sh=w.getSheet(0);
int cols=sh.getColumns();
int rows=sh.getRows();
Cell c=null;
String s1=null;
String s2=null;
String s3=null;
String s4=null;
ArrayList al=new ArrayList();
int j=0;
for(int i=1;i<rows;i++)
ITableElement table=wdContext.createTableElementz
s1=sh.getCell(0,i).getContents();
s2=sh.getCell(1,i).getContents();
s3=sh.getCell(2,i).getContents();
s4=sh.getCell(3,i).getContents();
table.setName(s1);
table.setAddress(s2);
table.setDesignation(s3);
table.setDummy(s4);
al.add(j,table);
j++;
wdContext.nodeTable().bind(al);
Regards
LakshmiNarayana
Maybe you are looking for
-
How to share the same Database Connection when using several Task Flows ?
Hi All, I'm using JDev 11.1.1.3.0. I'm developing ADF Fusion Applications (ABC BC, ADF Faces-) These applications are deployed on a Weblogic server. Each application has only one Application Module. All Application Modules have the same connection ty
-
INSPECTION LOT-TO AVOID LOT CREATION DURING OF ORDER
Hi GURUS, We have created an order for 10 MT,did confirmation for 2 MT,a Q.M lot was created.Now for the rest of 8 Qty we donot want to create Q.M lot while doing confirmation as the result for the rest of the is same. We have maintained the follow s
-
USING N70 AND I CAN'T SEND MESSAGE it sends comman...
hello everyone! i have latest software updated on my N70 recently ,it was working fine but now again its not sending messages.It gives error:unable to send message .. i don't know what to do...i can't even reinstall the software as i have the latest
-
Just received my new CS3 Web Premium in the mail yesturday and have been playing around with it, specially with flash. Do need some help with it though while I my trying to learn it. I have C++, VB, and PHP experience but have never really played aro
-
Issue with Customer Material Number in sales order
Hi All, I am facing one strange issue. Accoding to the flow of my client system the customer Material number is automaticlly populated while creating the line item in sales order. The Customer Material number come from the Configuration of the Item.