How to convert maintenance view 'v_t001k_assign' to inner join tables
Dear friends,
I found I could not select the fields of view 'v_t001k_assign' using SQL, and I found there are some tables joined together as below:
T001 MANDT = T001K MANDT
T001 BUKRS = T001K BUKRS
T001K MANDT = TASSIGN_MM_T001W MANDT
T001K BWKEY = TASSIGN_MM_T001W BWKEY
T001W MANDT = TASSIGN_MM_T001W MANDT
T001W WERKS = TASSIGN_MM_T001W WERKS
T001W_EXT MANDT = TASSIGN_MM_T001W MANDT
T001W_EXT WERKS = TASSIGN_MM_T001W WERKS_EXT
So how to convert this maintenance view 'v_t001k_assign' to inner join tables for SQL selection?
Thanks a lot!
Edited by: Qiwei Yin on May 27, 2009 10:35 AM
Hi,
You should use the 'Search help exit' to select the data for yourself from the database. Go into the search help maintenance screen and press F1 on field 'search help exit'; follow the links. There is actually a pretty good documentation.
Regards, Gerd Rother
Similar Messages
-
How to Access Maintenance View from a program
Hi Experts,
I have created a maintenance view for a table. i want to insert data's into the table through the maintenance view. I don't know how to access the view, how to insert data into the Maintenance view. Please suggest me how to access the view from the program.
with regards,
James...
Valuable answers will be rewarded...Hi,
What is the need to search for a program.
Use transaction SM30 or SE16 to create or maintain entries in the table.
e.g. if the Maintenance view is created on table A, then Goto transaction SM30 or SE16 and give the table name as A and proceed. This will automatically take u to the maintenance view on tha table A.
Regards,
Himanshu -
How to assign maintenance view to a selection screen field in a program.
Hi Experts,
I have created a custom table. Now, I have a program where there is a selection screen field for example "Load". After entering a value in the selection screen, and press enter, the user must be redirected to the maintenance view of the custom table to modify the specifed record.
Can anyone help me on how to do that?
Thanks a lot for ur precious help.
Regards,
AkshHi,
What is the need to search for a program.
Use transaction SM30 or SE16 to create or maintain entries in the table.
e.g. if the Maintenance view is created on table A, then Goto transaction SM30 or SE16 and give the table name as A and proceed. This will automatically take u to the maintenance view on tha table A.
Regards,
Himanshu -
How to prevent materialized views from refreshing if source table is zero
any ideas?
Probably not what you were hoping for but here are a couple of ideas.
Your account shows - 113 (85 unresolved)
1. How about helping to keep the forum clean by reviewing your 85 unresolved previous questions and giving HELPFUL or ANSWERED credit to those that helped you in the past.
2. Read the FAQ at the top right of the page and post the information about your system and software so that we know what you are working with.
3. Ask your question in the body of the thread. Don't just say 'Any ideas'.
What exactly is your question? Is this an academic question or do you have an actual problem that needs to be addressed?
If you have an actual problem produce the DDL for the materialized view and information about the type of refresh that has been set up for it. Is there a materialized view log on the base table(s)?
The simple answer to your quest is to use REFRESH ON DEMAND and check the base table(s) before you do a manual
refresh. The best answer depends on what version of Oracle you are using and what your actual setup is. Are your
MVs in REFRESH GROUPS?. That can make a difference in the answer.
How can anyone help with this question if you won't provide the information needed(FAQ)? Why SHOULD anyone help if you show you don't appreciate the help by marking questions answered once you have been helped. -
How to convert .txt (from applicaiton server) to internal table
hi all
i want to convert .txt (from applicaiton server) to internal table , im getting the contents in the itab, but im not able to remove '#',
can anybaody help me?
Thanks.The # is a representation of the tab, so you need to do something like this.
report zrich_0001.
data: str type string.
data: begin of itab occurs 0,
fld1(10) type c,
fld2(10) type c,
fld3(10) type c,
end of itab.
data:
dsn(100) value '/usr/sap/TST/sys/test.txt'.
constants:
con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB.
clear itab. refresh itab.
* Read the data.
open dataset dsn for input in binary mode.
do.
read dataset dsn into str.
if sy-subrc = 0.
split str at con_Tab into itab-fld1 itab-fld2 itab-fld3.
append itab.
else.
exit.
endif.
enddo.
close dataset dsn.
Loop at itab.
write:/ itab-fld1, itab-fld2, itab-fld3.
endloop.
Regards,
RIch Heilman -
How to convert initial view (bookmarks expanded) in over 1000 pfd files?
Could anybody please assist with how to complete a blanket change to over 1000 PDF files? I would like to change the security of the initial view so that the file opens with the bookmark tab already expanded. I am able to do this to each file individually but no more than one at a time. Any suggestions out there? Check out the attachment if clarity needed. Thanks ahead of time.
The selections are under the document properties (ctrl-D) as to how the document opens, at least that is what I think you are asking.
-
How to create a view consisting of data from tables in2 different databases
Using Oracle 10.2g
I have 2 databases Gus and haggis on Comqdhb schema.
glink indicates a databse link between Haggis and Gus
In Gus there are tables student,subject,grade,school containing columns like upn...
STUDENT
upn
academicYear
SUBJECT
subject
GRADE
examlevel
grade
SCHOOL
sn
In HAGGIS there are tables student,grade,teacher containing columns upn...desc below.
STUDENT
upn
GRADE
grade
upn
academicyear
level
Create view in your HAGGIS database which will join all of the exam grades together. You should have one view which will produce the following relation :
examGrade(upn, subject, examlevel, sn, grade,academicYear)
so I need to create a view which gets the data from both the tables in both the databases.
create view as examGrade(upn, subject, examlevel, sn, grade,academicYear) as select s.upn
But i am not getting how to select a column from 2 tables in different databases
I mean if i said
select upn from comqdhb.student@glink,comqdhb.student;
select upn from comqdhb.student@glink,comqdhb.student
ERROR at line 1:
ORA-00918: column ambiguously defined
help me out,Thank you.Thank you for the reply will follow up the code format
Create views in your HAGGIS schema database which will join all of the exam grades together. You should have one view which will produce the following relation :
examGrade(upn, subject, examlevel, sn, grade,academicYear)
I understand that there wont be duplication when we use conditions
If i query
select count(upn)
from comqdhb.student@glink I get 9000
but after the union
create view examGrade(upn, subject, examlevel, sn, grade,academicYear)
as
select distinct s.upn as upn
, g.subject as subject
, g."LEVEL" as examlevel
, g.grade as grades
, '9364097'
, to_number(g.academicyear) as academicyear
from comqdhb.student s
, comqdhb.grade g
where s.upn=g.upn
union
select s.upn
, sb.subject
, g.elevel
, g.grade
, s.acyr
, sc.sn
from comqdhb.subject@glink sb
, comqdhb.student@glink s
, comqdhb.gradevalues@glink g
, comqdhb.school@glink sc,
, comqdhb.studentingroup@glink sg
, comqdhb.teachinggroup@glink tg
where sb.sid=tg.sid
and tg.gid=sg.gid
and sg.upn=s.upn
and g."LEVEL"=tg.elevel
and s.school=sc.id
and sc.id=tg.id; returns
count(upn) from exam gradeIt gets stuck actually sometimes it returns
932002 some results.
2:
Another problem i am having which i am trying to solve and written up my ideas but haven't been getting the expected results.Hope you can help.Thank you.
Information:
=======
All children take exams at the age of 16 called a General Certificate of SecondaryEducation (GCSE).
They have to study and take exams in Mathematics, English and Science, and can take other subjects such as History, French, Art etc. Most students will study between 5 and 10 different subjects before taking their GCSEs.
For each exam, a student is awarded a grade from A*, A, B,C,D,E,F,G,U,X An A* grade is the best grade achievable and an X is the worst grade.
In order to analyze how students have performed, each grade is mapped to a numeric value as follows:
Grade Numerical score
A* 8
A 7
B 6
C 5
D 4
E 3
F 2
G 1
U 0
X 0
Now why i need this avgGCSE is because i have to create a view containing avgGCSE of the students it is used in the next question where a condition is avgGCSE is between 6.5 and 7
In order to calculate the avgGCSE the idea is to calculate the grades of the students and map the grades to their corresponding scores/values
add them all up and div by the total no of grades to get the avg.
desc comqdhb.STUDENT@glink;
STUDENT
=======
UPN
FNAME
CNAME
DOB
GENDER
PREVIOUSSCHOOL
XGCSE
SCHOOL
ACYR
STUDENTINGROUP
=============
UPN
GID
STARTDATE
ENDDATE
GRADE
GRADEVALUES
===========
GRADE
LEVEL
VALUE
I have a opinion that xgcse in STUDENT table refers to the avgGCSE which i want to calculate as when i asked my professor as to what xgcse he said that he forgot to take it out of the table and it is not necessary while creating avggcse.
select *
from comqdhb.student@glink
where xgcse<6.5; Displaying a result
returns:
UPN FAMILYNAME COMMONNAME DATEOFBIR GENDER PREVIOUSSCHOOL XGCSE SCHOOL ACYR
===========================================================================
1011 KIMBERLY ABBOT 07-JUL-79 f none 3.93500948 2 2
select *
from comqdhb.student@glink
where xgcse between 6.5 and 7 and upn = 1386; Displaying a result
returns:
UPN FAMILYNAME COMMONNAME DATEOFBIR GENDER PREVIOUSSCHOOL XGCSE SCHOOL ACYR
===========================================================================
1386 STEPHANIE AANNESSON 15-JAN-79 f none 6.88873 2 2 so if xgcse is the avgGCSE then upn 1011 has avggcse<6.5 and 1386 has avggcse >6.5
my idea was backward strategy like so now if we find out upn 1368 has suppose xgcse(avggcse)>6.5 how to extract the avggcse for the particular upn We need to map grades from GRADEVALUES to grade in STUDENTINGROUP and map upn from studentingroup to upn in student to output the values for the corresponding grades from GRADEVALUES
select grade
from comqdhb.studentingroup@glink
where upn = 1011;
Result:
GRADE
=====
D
F
B
E
C
E
E
B
8 rows selected. Mapping each grade to the corresponding value and calculating we get
32/8=4 total(values to corresponding grades)/no of grades.
But the xgcse for upn 1011 is 3.935 and i am getting 4!! maybe xgcse isn't avggrade but ? is the procedure by me correct for calculating avggcse
select grade
from comqdhb.studentingroup@glink
where upn = 1386;
Result:
GRADE
======
A*
A*
A*
A*
B
A*
A*
A
B
B
B
11 rows selected. grade to the corresponding value and calculating we get
79/11=7.12 total(values to corresponding grades)/no of grades.
But the xgcse for upn 1011 is 6.88... and i am getting 7.12!!
But another problem
when i say
select g.value,g.grade
from comqdhb.gradevalues@glink g
, comqdhb.studentingroup@glink sg
where g.grade=sg.grade
and sg.upn=1011;
result:
======
VALUE GRADE
===========
100 B
100 B
80 C
60 D
40 E
40 E
40 E
20 F
6 B
6 B
5 C
VALUE GRADE
=============
4 D
3 E
3 E
3 E
2 F
16 rows selected.
select distinct g.value,g.grade
from comqdhb.gradevalues@glink g
, comqdhb.studentingroup@glink sg
where g.grade=sg.grade
and sg.upn=1011;
result:
======
VALUE GRADE
============
2 F
100 B
6 B
3 E
60 D
5 C
4 D
80 C
40 E
20 F
10 rows selected. I am getting only 8 for the query
select grade
from comqdhb.studentingroup@glink
where upn = 1386; here its becomming 10 and also its displaying values as 100 and ...
select distinct *
from comqdhb.gradevalues@glink;
GRADEVALUES
===========
LEVEL GRADE VALUE
================================
a A 120
a B 100
a C 80
a D 60
a E 40
a F 20
a U 0
a X 0
g A 7
g A* 8
g B 6
LEVEL GRADE VALUE
================================
g C 5
g D 4
g E 3
g F 2
g G 1
g U 0
g X 0
18 rows selected. I was hoping if i could map the grades and get the values and calculate avggrade by total(values)/count(values)that would be it but here there are values like 100...
select sum(g.value)/count(g.grade) as avggrade
from comqdhb.gradevalues@glink g
, comqdhb.studentingroup@glink sg
where g.grade=sg.grade
and sg.upn=1386;
avggrade
========
37.4375 the avggrade cant be this big and when i map each grade i obtained for 1368 like a to 7+b to 6 so on i get avggrade 7.12
kindly help.
Edited by: Trooper on Dec 15, 2008 4:49 AM -
How to convert 2 or more Excel files as tables in One Application
Hi
I have created one application according to apex demo using excel spreedsheet in which copying data is converted to table then when run application form and reports are produced.
Now i created file in a similar way but it is taking only one sheet as a table in one application. So How to add few other pages from spreedsheet converting to a table and run in the same application.
Also i have a workspace created in html.oracle.com in that when i want to upload excel file or copy data from excel i am getting error as......
ORA-20001: create_table error: ORA-20001: Excel load run ddl error: ORA-01658: unable to create INITIAL extent for segment in tablespace FLOW_6868
Can anybody help me? Thank in Advance!!!!
Tnx
VijayaAlso i have a workspace created in html.oracle.com in that when i want to upload excel file or copy data from excel i am getting error as......
ORA-20001: create_table error: ORA-20001: Excel load run ddl error: ORA-01658: unable to create INITIAL extent for segment in tablespace FLOW_6868Looks like the data you're trying to load will exceed your workspace quota (2MB small, 5MB medium). Try loading fewer rows. -
How to convert 3.16 to 3.20 in tables? Round only the decimals?
In a recent post mr Trevor wrote a powerful script to round decimals but altering the preceding number:
23.45 was converted to 23.
23.78 to 24.
It is possible to script only the decimals not touching the integer?
,03 : 00
,06 : 10
,14 : 10
,18 : 20
,71 : 70
,77 : 80
Etc?Hi, thank you.
As numbers are placed on tables, how to apply this script to the whole document?
It is necessary to make a list?
Or it may be used with a skeleton like this wrote by Trevor?
var doc = app.activeDocument;
app.changeGrepPreferences = app.findGrepPreferences = null;
app.findGrepPreferences.findWhat = "\\d+\,\\d+";
var myNumberFinds = doc.findGrep(),
l = myNumberFinds.length;
while (l--)
app.changeGrepPreferences.changeTo = Math.round(myNumberFinds[l].contents.replace(/\,/,".")).toString();
myNumberFinds[l].changeGrep();
Yes, numbers between ,094-0,99 will afect the integer!
Thank you. -
How to create a view on a Non-Transparent Tables.
Hi,
i want to create a view on P0001 & P0002 tables.
these two tables are non transparent.
Can any body help me ,
Thanks in Advance,
Regards
VinayHi Vinay
It seems you program HR-ABAP. Generally it is not required to create views since we use LDB (Logical database) utilizations in our programs. Doesn't it satisfy your requirement? Or is it required at somewhere you do not use LDB?
*--Serdar -
How to convert the flat file data into sap tables . ?
how to upload flat file data into sap table . before upload mapping is also there in some filds . any one can give me some steps how to upload and mapping . ?
Hi
See the sample code
REPORT zmmupload.
Internal Table for Upload Data
DATA: i_mara like MARA occurs 0 with header line
PARAMETERS: p_file LIKE ibipparms-path. " Filename
At selection-screen on Value Request for file Name
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
Get the F4 Values for the File
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
IMPORTING
file_name = p_file.
Upload the File into internal Table
CALL FUNCTION 'UPLOAD'
EXPORTING
filename = p_file
filetype = 'DAT'
TABLES
data_tab = i_mara
EXCEPTIONS
conversion_error = 1
invalid_table_width = 2
invalid_type = 3
no_batch = 4
unknown_error = 5
gui_refuse_filetransfer = 6
OTHERS = 7.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Upload the Data from Internal Table
MODIFY MARA from TABLE i_MARA.
Regards
Anji. -
How do I find missing entries in outer join table?
Hi all,
I am trying to find records in table1 that are missing in table2. This is a simple process in SQL, but ABAP is giving me trouble. I want to do this using an outer join.
Example:
Select table1~docnumber
From table1
Left Outer Join table2
On table1docnumber = table2docnumber
Where table2~docnumber IS NULL. (the record is missing in table2)
Note: ABAP gives an error and wants me to use the Having Clause, which is ok, but then ABAP wants me to use Group By, which ok, but then I still get the same syntex error.
Any thoughts on doing this with the outer join and is null options. I do not want to select into two internal tables and compare them.All,
I am not trying to do a subquery. Just a simple outer join where I know some records are missing in the second table.
Here is the code:
select eban~banfn
into table i_delay_banfn
from eban
left outer join zsmt_prdelay_upd
on eban~banfn = zsmt_prdelay_upd~banfn
where zsmt_prdelay_upd~banfn IS NULL.
Here is the error message:
No fields from the right-hand table of a LEFT OUTER JOIN may appear in
the WHERE condition: "ZSMT_PRDELAY_UPD~BANFN".
select eban~banfn
into table i_delay_banfn
from eban
left outer join zsmt_prdelay_upd
on eban~banfn = zsmt_prdelay_upd~banfn
having zsmt_prdelay_upd~banfn IS NULL.
Please use code tags
Edited by: Rob Burbank on Mar 5, 2009 12:20 PM -
hai,
how to create help viewViews
Importance/Use of Views
Data for an application object is often distributed on several database tables. Database systems therefore provide you with a way of defining application-specific views on the data contained in several tables. These are called views.
Data from several tables can be combined in a meaningful way using a view (join). You can also hide information that is of no interest to you (projection) or only display those data records that satisfy certain conditions (selection).
A view is a logical view on one or more tables, that is, a view is not actually physically stored, instead being derived from one or more other tables.
The data of a view can be displayed exactly like the data of a table in the extended table maintenance.
Join, Projection and Selection
CROSS PRODUCT
Given two tables TABA and TABB. Table TABA has 2 entries and table TABB has 4 entries
Each record of TABA is first combined with each record of TABB. If a join condition is not defined, the cross product of tables TABA and TABB is displayed with the view.
Join condition
A join condition describes how the records of the two tables are connected.
Inner Join and Outer Join
The data that can be selected with a view depends primarily on whether the view implements an inner join or an outer join.
With an inner join, you only get the records of the cross-product for which there is an entry in all tables used in the view.
With an outer join, records are also selected for which there is no entry in some of the tables used in the view. (ABAP allows left outer join.)
The data that can be selected with a view depends primarily on whether the view implements an inner join or an outer join.
Projection
Sometimes some of the fields of the tables involved in a view are not of interest. The set of fields used in the view can be defined explicitly (projection). In our example, Field 4 is of no interest and can be hidden.
We specify the fields which we need to show in our view by including them under the view flds tab when creating a view in the dictionary.
+Selection Conditions+
Selection conditions that are used as a filter can be defined for a view.
Specifying these conditions under the Selection conditions tab when creating a view in the dictionary would have an effect which is similar to specifying a where clause when writing a select query to restrict data.
View Types
Four different view types are supported. These differ in the way in which the view is implemented and in the methods permitted for accessing the view data .
Database views are implemented with an equivalent view on the database.
Projection views are used to hide fields of a table (only projection).
Help views can be used as selection method in Search help.
Maintenance views permit you to maintain the data distributed on several tables for one application object at one time.
Database Views
Database views should be created if want to select logically connected data from different tables simultaneously.
Database views implement an inner join.
Application programs can access the data of a database view using the database interface. (Just as we write select queries on database tables, we can write them for views as well.)
Includes in Database Views
An entire table can be included in a database view. In this case all the fields of the included table will become fields of the view (whereby you can explicitly exclude certain fields).
To include one of the tables in the view, enter character * in field View field, the name of the table to be included in field Table and character * again in field Field name on the View fields tab page of the maintenance screen of the view.
You can also exclude individual fields of an included table. If you do not want to include a field of the included table in the view, enter - in field View field, the name of the included table in field Table and the name of the field to be excluded in field Field name.
Inserts with Database Views
If a database view contains only one single table, data can be inserted in this table with the view .
You have the following options for the contents of the table fields not contained in the view:
If the field is defined on the database with NOT NULL as initial value, the field is filled with the corresponding initial value.
If the field is defined on the database as NOT NULL without initial value, an insert is not possible. This results in a database error.
If the field is not defined on the database as NOT NULL, there will be a NULL value in this field.
Projection Views
Projection views are used to hide fields of a table. This can minimize interfaces; for example when you access the database, you only read and write the field contents actually needed
For the above diagram, fields F3 and F4 are irrelevant, and therefore hidden from the projection view of the table.
Maintenance Views
A maintenance view permits you to maintain the data of an application object together.
The maintenance status determines which accesses to the data of the underlying tables are possible with the maintenance view.
Maintenance Status
The maintenance status of a view controls whether data records can also be changed or inserted in the tables contained in the view.
The maintenance status can be defined as follows:
Read only: Data can only be read through the view.
Read, change, delete, insert: Data of the tables contained in the view can be
changed, deleted, and inserted through the view.
Read and change: Existing view entries can be changed. However, records
cannot be deleted or inserted.
Read and change (time-dependent views): Only entries whose non-time
dependent part of the key is the same as that of existing entries may be
inserted.
Help Views
Help view is created if a view with outer join is needed as selection method of a search help.
Help views are used exclusively for search helps.
A conventional database view selects data from the database using an inner join.
For a help view however, data is selected using a left outer join.
Eg-> Suppose table SCARR (Airline master table) has AA American airlines
AB Air Berlin
AC- Air Canada as three entries.
Table SPFLI (Flight schedule) has entries corresponding only to airlines AA (American airlines) and AB (Air Berlin).
Now if a database view were to be used as a selection method for a search help for airlines, we would only get AA and AB as possible entries because the database view implements an inner join .If however, we were to use a help view as the selection method here, we would get AA,AB and AC as possible entries because a help view would implement a left outer join.
Restrictions for Maintenance and Help Views
There are some restrictions for selecting the secondary tables of a maintenance view or help view. The secondary tables have to be in an N:1 dependency to the primary table or directly preceding secondary table. This ensures that there is at most one dependent record in each of the secondary tables for a data record in the primary table.
Append Views
Append views are used for enhancements of database views of the SAP standard.
With an append view, fields of the base tables of the view can be included in the view without modifications. This is analogous to enhancing a table with an append structure.
An append view is assigned to exactly one database view. More than one append view can be created for a database view.
The append technique described can only be used for database views. With an append view, only new fields from the base tables contained in the view can be inserted in the view. You cannot insert new tables in the view or modify the join conditions or selection conditions of the view.
Check out the below related threads
Views
views -
I want to fetch the data from a maintenance view: V_001_B.
I used the select statement to retrieve the data.But, I got a message saying that "it's not a table or a database view or a projection view".
Any body please help me, how to retrieve data from a maintenance view.these r the 3 tables which r connected to ur view - T882,T001,T001Z
if u want data based on some join on these 3 tables then put a join in ur code on these 3 tables and then fetch ur record..if u want datra specific to one table only then u can directly select tht frm a single table..
amit -
Additional Field in standard maintenance view
Hi Experts,
I would like to add an additional field plant in maintenance view V_TKZU3_CO (SPRO PATH: Controlling --> Product cost controlling -->Product cost planning --> Basic settings for material costing -->Overhead -->Define costing sheets ).
What I'm planning to do is to modify the standard maintenance view V_TKZU3_CO and regenerate the table maintenance generator so that the new field will be added and populate a ztable a copy of table TKZU3 + plant...
However what I'm afraid of is when I regenerated the table maintenance generator using the standard function group OCOE, it might impact some other standard object included..
Do you have any idea on how can I add the additional field without modifying the standard? Or if I will apply the standard modification I'm planning.. what are the possible impacts?
Thanks in advance!Hi
U can create a new table view like V_TKZU3_CO, insert your new fields and create the maintenance view program for it.
Max
Maybe you are looking for
-
I would like to t have 2 apple ids for one computer so my husband and I can share music he got a 4s and i got the 5. Can this be done?
-
"Microsoft Office Professional Plus 2013 encountered an error during setup."
"Microsoft Office Professional Plus 2013 encountered an error during setup." Can anyone help me?
-
How to reduce EAR file size of ADF 11 g app.
Hi I developed the ADF 11 g Aplication using jdeveloper tool.i deployed it on WLS10.3 successfully and able to run it also. Through wizards in jdeveloper i created the EAR file.while packing the EAR file ,if i included the required libraries in WAR m
-
International character problem using WE8ISO8859P1
I have a database that has WE8ISO8859P1 charset. Character data in this database has ASCII characters (char_code < 128) and some international characters (193 < char_code < 255). There is no problem seeing, inserting and updating those international
-
How to encrypt a folder for a windows user from Lion?
How to I encrypt a folder to be sent to a Windows user without recurring to the command line. I have Stuffit 13 but get an error message. Upgrading seems over-kill. Willing to try another utility if necessary. Tommy