How to convert initial view (bookmarks expanded) in over 1000 pfd files?

Could anybody please assist with how to complete a blanket change to over 1000 PDF files? I would like to change the security of the initial view so that the file opens with the bookmark tab already expanded. I am able to do this to each file individually but no more than one at a time. Any suggestions out there? Check out the attachment if clarity needed. Thanks ahead of time.

The selections are under the document properties (ctrl-D) as to how the document opens, at least that is what I think you are asking.

Similar Messages

Is it possible to generate PDF 1.5 with linearization & initial view = bookmarks?

Hello,
I need to convert Office documents to PDF 1.5 (Acrobat 6) with the following properties:
- Web view (linearization)
- Initial view = Bookmarks panel and page.
Each way I tried, in fact produced PDF 1.6 (Acrobat 7).
Is it doable to to generate PDF 1.5?
Thanks for help
Mathias

Using Acrobat 7.0.9, the following VB code generates PDF 1.6:
Set AcroDoc = New AcroPDDoc
bRet = AcroDoc.Open(pdfDocName)
bRet = AcroDoc.SetPageMode(PDViewMode.PDUseBookmarks)
bRet = AcroDoc.Save(PDSaveLinearized + PDSaveFull, pdfDocName)
How to generate PDF 1.5 ?
Regards,
Mathias

PDF through VBA: How to set Initial View?

- Adobe Acrobat 6.0 (sorry we're a bit out of date)
- MS Office 2003
- MS Windows XP Professional SP2
I am trying to automate the creation of PDFs from MS Word. I have succeeded. My VBA code works fine (have pasted it below). I can create a PDF, and give it a title and author.
The problem I am having is with the Initial View settings, i.e. how the document opens. I want to hardcode:
1. Show to "Page Only"
2. Page Layout to "Continuous"
3. Magnification to "Fit Width"
The first I have done, using AcroExch.PDDoc's SetPageMode() function (although it seems to default to that even without doing this). I cannot, for the life of me, find any reference to the second and third, though. This must be doable, right? Be kind of weird not to have access to this in the API.
Hours of Googling has thrown up three ideas I've discarded.
1. AcroExch.App's SetPreference() function. This would presumably change preferences on the machine making the PDF, not reading it. I don't want to fiddle with other people's preferences anyway.
2. AcroExch.AVPageView's ZoomTo() function. Ditto. I am not creating an app to view PDFs, just trying to configure the default for opening one I've created.
3. An "undocumented" SetOpenInfo() in AcroExch.PDDoc. This looked the most promising for Magnification, but nobody seems to be able to get it to work, and it does nothing for me either. Someone somewhere even suggested it had been deprecated in later versions of Acrobat.
So... what do I do?
Thanks in advance for any pointers.
jON
===============================================
Sub MakePDF(strFilename As String, strTitle As String, strAuthor As String)
Dim pdfD As PdfDistiller
Dim strPDFName As String
Dim strPSName As String
strPSName = strFilename & ".ps"
strPDFName = strFilename & ".pdf"
'... make PS
Application.ActivePrinter = myPDFPrinter
Application.PrintOut Filename:="", _
Range:=wdPrintAllDocument, _
Item:=wdPrintDocumentContent, _
Copies:=1, _
Pages:="", _
PageType:=wdPrintAllPages, _
ManualDuplexPrint:=False, _
Collate:=True, _
Background:=False, _
PrintToFile:=True, _
PrintZoomColumn:=0, _
PrintZoomRow:=0, _
PrintZoomPaperWidth:=0, _
PrintZoomPaperHeight:=0, _
OutputFileName:=strPSName, _
Append:=False
'... make PDF
Set pdfD = New PdfDistiller
pdfD.FileToPDF strPSName, strPDFName, ""
'... tag PDF
Set qq = CreateObject("AcroExch.PDDoc")
b = qq.Open(strPDFName)
b = qq.SetInfo("Title", strProperties_Title)
b = qq.SetInfo("Author", strProperties_Author)
b = qq.SetPageMode(1) '... 1 = PDUseNone
b = qq.Save(33, strPDFName) '... 33 = PDSaveFull (1) OR PDSaveCollectGarbage (32)
b = qq.Close
End Sub

I have the same problem. I need to change Initial View Settings configuring the following settings
2. Page Layout to "Single Page"
3. Magnification to "Fit Width"
My software configuration is as follows:
- Adobe Acrobat 7.9
- Microsoft Windows XP SP2
- Visual Basic 6
Has anyone worked with this attributes of Acrobat?

Controlling the page view between initial view, bookmarks and links

I have a 300 page InDesign document with links, buttons and bookmarks. The client wants it to open at an initial view of 50%. All of the other navigation is set to Inherent Zoom. This works well except the bookmarks which automatically switch to fit in window. (The bookmarks were made in InDesign). This happen whether they are used from the nav buttons (set as anchors) or using the side panel bookmarks for navigation.
If I go back and try to reset the view in bookmark properties in Acrobat it seems to add the 2 magnifications together.
Is there a way to set the bookmark to be at 50%? I tried going back to InDesign to set the bookmark when the magnification is at at certain % but that didn't seem to work either.
thanks!

Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
I assume that you were referring to setting browser.tabs.onTop pref to false on the about:config page.
Current Firefox versions only show the "Tabs on Top" menu entry in the "View > Toolbars" and "Firefox > Options" menu and in toolbar context menus if the tabs aren't in the default position on top.

How to convert maintenance view 'v_t001k_assign' to inner join tables

Dear friends,
I found I could not select the fields of view 'v_t001k_assign' using SQL, and I found there are some tables joined together as below:
T001     MANDT     =     T001K     MANDT
T001     BUKRS     =     T001K     BUKRS
T001K     MANDT     =     TASSIGN_MM_T001W     MANDT
T001K     BWKEY     =     TASSIGN_MM_T001W     BWKEY
T001W     MANDT     =     TASSIGN_MM_T001W     MANDT
T001W     WERKS     =     TASSIGN_MM_T001W     WERKS
T001W_EXT     MANDT     =     TASSIGN_MM_T001W     MANDT
T001W_EXT     WERKS     =     TASSIGN_MM_T001W     WERKS_EXT
So how to convert this maintenance view 'v_t001k_assign' to inner join tables for SQL selection?
Thanks a lot!
Edited by: Qiwei Yin on May 27, 2009 10:35 AM

Hi,
You should use the 'Search help exit' to select the data for yourself from the database. Go into the search help maintenance screen and press F1 on field 'search help exit'; follow the links. There is actually a pretty good documentation.
Regards, Gerd Rother

How can you save your bookmarks in a different doc or file so that they won't get lost if a system reinstall happens..?

i'd like the ability to save bookmarks to a separate doc or file so that i can ensure i have them if a system reinstall happens.

https://support.mozilla.com/en-US/kb/Backing+up+and+restoring+bookmarks
http://support.mozilla.com/en-US/kb/Backing+up+your+information

How to Convert the content in BLOB field into a PDF file...

Hi,
I am having PDF files stored in BLOB column of a table in Oracle Database (11G R2).
I want to retrieve the files back and store them in hard disk. I am successful in storing the content as a file with '.doc' but if I store the file as '.pdf', adobe fails to open the file with error
Adobe Reader could not open file 'xxx.pdf' because it is either not a supported file type or because the file has been damaged (for example it was sent as an email attachment and wasn't correctly decoded)
I am using following example code to achieve my goal...
Declare
b blob;
c clob;
buffer VARCHAR2(32767);
buffer_size CONSTANT BINARY_INTEGER := 32767;
amount BINARY_INTEGER;
offset NUMBER(38);
file_handle UTL_FILE.FILE_TYPE;
begin
select blob_data into b from blobdata where id=1;
c := blob2clob(b);
file_handle := UTL_FILE.FOPEN('BLOB2FILE','my_file.pdf','w',buffer_size);
     amount := buffer_size;
     offset := 1;
     WHILE amount >= buffer_size
     LOOP
          DBMS_LOB.READ(c,amount,offset,buffer);
          -- buffer:=replace(buffer,chr(13),'');
          offset := offset + amount;
          UTL_FILE.PUT(file_handle,buffer);
          UTL_FILE.FFLUSH(file_handle);
     END LOOP;
     UTL_FILE.FCLOSE(file_handle);
end;
create or replace FUNCTION BLOB2CLOB ( p_blob IN BLOB ) RETURN CLOB
-- typecasts BLOB to CLOB (binary conversion)
IS
|| Purpose : To Convert a BLOB File to CLOB File
|| INPUT : BLOB File
|| OUTPUT : CLOB File
|| History: MB V5.0 24.09.2007 RCMS00318572 Initial version
ln_file_check NUMBER;
ln_file_size NUMBER;
v_text_file CLOB;
v_binary_file BLOB;
v_dest_offset INTEGER := 1;
v_src_offset INTEGER := 1;
v_warning INTEGER;
lv_data CLOB;
ln_length NUMBER;
csid VARCHAR2(100) := DBMS_LOB.DEFAULT_CSID;
V_LANG_CONTEXT NUMBER := DBMS_LOB.DEFAULT_LANG_CTX;
BEGIN
DBMS_LOB.createtemporary (v_text_file, TRUE);
SELECT dbms_lob.getlength(p_blob) INTO ln_file_size FROM DUAL;
DBMS_LOB.converttoclob (v_text_file, p_blob, ln_file_size, v_dest_offset, v_src_offset, 0, v_lang_context, v_warning);
SELECT dbms_lob.getlength(v_text_file) INTO ln_length FROM DUAL;
RETURN v_text_file;
END;

user755667 wrote:
Hi,
I am having PDF files stored in BLOB column of a table in Oracle Database (11G R2).
I want to retrieve the files back and store them in hard disk. I am successful in storing the content as a file with '.doc' but if I store the file as '.pdf', adobe fails to open the file with error
Adobe Reader could not open file 'xxx.pdf' because it is either not a supported file type or because the file has been damaged (for example it was sent as an email attachment and wasn't correctly decoded)
I am using following example code to achieve my goal...
Declare
b blob;
c clob;
buffer VARCHAR2(32767);
buffer_size CONSTANT BINARY_INTEGER := 32767;
amount BINARY_INTEGER;
offset NUMBER(38);
file_handle UTL_FILE.FILE_TYPE;
begin
select blob_data into b from blobdata where id=1;
c := blob2clob(b);
file_handle := UTL_FILE.FOPEN('BLOB2FILE','my_file.pdf','w',buffer_size);
     amount := buffer_size;
     offset := 1;
     WHILE amount >= buffer_size
     LOOP
          DBMS_LOB.READ(c,amount,offset,buffer);
          -- buffer:=replace(buffer,chr(13),'');
          offset := offset + amount;
          UTL_FILE.PUT(file_handle,buffer);
          UTL_FILE.FFLUSH(file_handle);
     END LOOP;
     UTL_FILE.FCLOSE(file_handle);
end;
create or replace FUNCTION BLOB2CLOB ( p_blob IN BLOB ) RETURN CLOB
-- typecasts BLOB to CLOB (binary conversion)
IS
|| Purpose : To Convert a BLOB File to CLOB File
|| INPUT : BLOB File
|| OUTPUT : CLOB File
|| History: MB V5.0 24.09.2007 RCMS00318572 Initial version
ln_file_check NUMBER;
ln_file_size NUMBER;
v_text_file CLOB;
v_binary_file BLOB;
v_dest_offset INTEGER := 1;
v_src_offset INTEGER := 1;
v_warning INTEGER;
lv_data CLOB;
ln_length NUMBER;
csid VARCHAR2(100) := DBMS_LOB.DEFAULT_CSID;
V_LANG_CONTEXT NUMBER := DBMS_LOB.DEFAULT_LANG_CTX;
BEGIN
DBMS_LOB.createtemporary (v_text_file, TRUE);
SELECT dbms_lob.getlength(p_blob) INTO ln_file_size FROM DUAL;
DBMS_LOB.converttoclob (v_text_file, p_blob, ln_file_size, v_dest_offset, v_src_offset, 0, v_lang_context, v_warning);
SELECT dbms_lob.getlength(v_text_file) INTO ln_length FROM DUAL;
RETURN v_text_file;
END;I skimmed this and stopped reading when i saw the BLOB to CLOB function.
You can't convert binary data into character based data.
So very likely this is your problem.

How to test or view data if the source is XML files..?

Hi,
I just got a doubt..
How can we test or view data from BI Admintool if the source is XML files.
If it is database we can perform "Update Row Count" or "view data" from physical layer.
I am just going through the "sample sales" example and could not find the option to test
connectivity with xml file..(I can see the directory which points to samplesales and xml files..
but how can I view those data in BI admintool)..
Help would be appreciable..
Thanks and Regards,
Sri.

Hi Sri,
Yes, this option is not available for XML and multidimensional sources. Check "Show row count in physical view" in Table 2-1 documented here ,
http://docs.oracle.com/cd/E21764_01/bi.1111/e10540/planning.htm#BABEFIHE
Rgds,
Dpka

How to convert 864 Transaction code into XML in EDI to File Scenario

Hello Friends,
 Can any body help me out in using 864 Transaction Code (Tex Message) in EDI to Flat File Conversion?? I mean i am using just 2 Fields i.e Name and Address.I didnt understand the Format given..Here is the format for Name
N1 Name Pos: 040 Max: 1
 Heading - Optional
 Loop: N1 Elements: 4
To identify a party by type of organization, name, and code
Element Summary:
Ref Id Element Name Req Type Min/Max Usage
N101 98 Entity Identifier Code M ID 2/3 Must use
Description: Code identifying an organizational entity, a physical
location, property or an individual
All valid standard codes are used.
N102 93 Name C AN 1/60 Used
Description: Free-form name
N103 66 Identification Code Qualifier C ID 1/2 Used
Description: Code designating the system/method of code structure used
for Identification Code (67)
All valid standard codes are used.
N104 67 Identification Code C AN 2/80 Used
Description: Code identifying a party or other code
Syntax:
1. N102 R0203 -- At least one of N102 or N103 is required.
2. N103 P0304 -- If either N103 or N104 are present, then the others are required.
Comments:
1. This segment, used alone, provides the most efficient method of providing organizational identification. To obtain this efficiency the "ID Code" (N104)
must provide a key to the table maintained by the transaction processing party.
2. N105 and N106 further define the type of entity in N101.
[b]
Here is the format for Address
N3 Address Information Pos: 060 Max: 2
 Heading - Optional
 Loop: N1 Elements: 2
To specify the location of the named party
Element Summary:
Ref Id Element Name Req Type Min/Max Usage
N301 166 Address Information M AN 1/55 Must use
Description: Address information
N302 166 Address Information
Description: Address information O AN 1/55 Used
So Help me hoe to convert this into XML...

try this
For EDI U need SEEBURGER Adapter or Conversion agent by itemfield.
Using Conversion agent convert EDI Into XSD and Import using External definition.
Have look
EDI Conversion
Re: Seeburger Splitter adapter!!
Thanks

How to convert the output of the report (program) to PDF file , Please HELP

Good Morning, ALL
I have done a small program in ABAP that lets the employee enters his information. Once the emplyee enters the information and executes the program, I want the result to be saved in a PDF file (in any kind of format). I did try to do this action BUT I couldn't. ( ABAP Beginner LOL ).
This is the code ( The main thing ):
SELECTION-SCREEN BEGIN OF BLOCK Yours WITH FRAME TITLE text-001.
PARAMETERS: NAME(15) TYPE C OBLIGATORY lower case,
            CITY LIKE NAME OBLIGATORY ,
            DATE LIKE SY-DATUM DEFAULT SY-DATUM   MODIF ID ZZZ,
            ID# TYPE C LENGTH 9,
            PHONE TYPE C LENGTH 10.
SKIP 4.
SELECTION-SCREEN END OF BLOCK Yours.
SELECTION-SCREEN BEGIN OF BLOCK More WITH FRAME TITLE text-002.
PARAMETERS: MALE RADIOBUTTON GROUP G1 DEFAULT 'X',
            FEMALE RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF BLOCK More.
SELECTION-SCREEN BEGIN OF BLOCK Details WITH FRAME TITLE text-003.
PARAMETERS: P_DATE TYPE DATUM,
            Locate TYPE C LENGTH 30.
SELECTION-SCREEN END OF BLOCK Details.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF SCREEN-GROUP1 = 'ZZZ'.
      SCREEN-INPUT = '0'.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
Any useful help will be appreciated, THANK YOU

Hi
Try the below code.
REPORT ztest_notepad.
"Variables
DATA:
   l_lay         TYPE pri_params-paart,
   l_lines       TYPE pri_params-linct,
   l_cols        TYPE pri_params-linsz,
   l_val         TYPE c,
   l_no_of_bytes TYPE i,
   l_pdf_spoolid LIKE tsp01-rqident,
   l_jobname     LIKE tbtcjob-jobname,
   l_jobcount    LIKE tbtcjob-jobcount,
   spoolno       TYPE tsp01-rqident.
*Types
TYPES:
   t_pripar      TYPE pri_params,
   t_arcpar      TYPE arc_params.
"Work areas
DATA:
   lw_pripar     TYPE t_pripar,
   lw_arcpar     TYPE t_arcpar.
DATA:
   it_t100       TYPE t100 OCCURS 0 WITH HEADER LINE,
   it_pdf        TYPE tline OCCURS 0 WITH HEADER LINE.
"Start-of-selection.
START-OF-SELECTION.
l_lay   = 'X_65_132'.
l_lines = 65.
l_cols = 132.
"Read, determine, change spool print parameters and archive parameters
CALL FUNCTION 'GET_PRINT_PARAMETERS'
    EXPORTING
      in_archive_parameters = lw_arcpar
      in_parameters          = lw_pripar
      layout                 = l_lay
      line_count             = l_lines
      line_size              = l_cols
      no_dialog              = 'X'
    IMPORTING
      out_archive_parameters = lw_arcpar
      out_parameters         = lw_pripar
      valid                  = l_val
    EXCEPTIONS
      archive_info_not_found = 1
      invalid_print_params   = 2
      invalid_archive_params = 3
      OTHERS                 = 4.
IF l_val space AND sy-subrc = 0.
    lw_pripar-prrel = space.
    lw_pripar-primm = space.
    NEW-PAGE PRINT ON
      NEW-SECTION
      PARAMETERS lw_pripar
      ARCHIVE PARAMETERS lw_arcpar
      NO DIALOG.
ENDIF.
"Get data
SELECT *
FROM t100
INTO TABLE it_t100
UP TO 100 ROWS
WHERE sprsl = sy-langu.
" Writing to Spool
LOOP AT it_t100.
    WRITE:/ it_t100.
ENDLOOP.
NEW-PAGE PRINT OFF.
CALL FUNCTION 'ABAP4_COMMIT_WORK'.
spoolno = sy-spono.
"Convert spool to PDF
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
    EXPORTING
      src_spoolid   = spoolno
      no_dialog     = ' '
    IMPORTING
      pdf_bytecount = l_no_of_bytes
      pdf_spoolid   = l_pdf_spoolid
      btc_jobname   = l_jobname
      btc_jobcount = l_jobcount
    TABLES
      pdf           = it_pdf.
"Download PDF file C Drive
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
      filename = 'C:\itab_to_pdf.pdf'
      filetype = 'BIN'
    TABLES
      data_tab = it_pdf
Hope this helps you.

How do I print my bookmarks or save them in a file?

I can not find anyway to print my bookmarks or save them to a word file.

Yes, it's possible to [[Exporting bookmarks to an HTML file|export bookmarks to an HTML file]]: Bookmarks > Organize > Import/Export > Export to HTML.
Does it do what you need?

How to improve performance on SD document with over 1000 line items

Dear experts,
A lot of our SD document contains 1500 to 5000 line items. Saving a simple change of one line item description would take 5 minutes (with or without pricing considerations). We are on ECC 5.0. Does anyone know of an existing snote or ways that would help to improve performance?
A related question on performance tracing. I have done some tracing and notice that the time to access SQL/buffer/enqueue/RFC only amount to less than 50% (sometimes 5%) of the total processing time. What has the system been doing for the "unrecorded" time?
Thank you and appreciate!
-cynthia

I would check which modules or which parts of code take the most of the processing time. You can use SE30 to check one order save.
If it's not SQL - then it may be internal processing like inefficient loops and so on. For example runtime of nested loops with big tables have grows exponentially.
It may be caused by SAP code - search OSS notes for based on the module names which consume most time.
OR it can be caused by the code in your userexits - then developers have to fix it and redesign using more efficient technique.

How to convert Sequence file documentation from TXT or HTML to MS Word ?

Hello, I would like to modify a DocSupport.prj which in default generate only TXT or HTML to support MS Wors *.DOC. I have already change the dialog (add *.doc filter..), that was simple. But the major problem is how to convert the output from doc.c to some *.doc file. I found somewhere here Word9 ActiveX Instrument for CVI, but I don't understand, how the CVI gets informations about the steps etc. from *.seq file for another use. The original code in doc.c is quite hard to understand it quickly. Thanks for help.

Hi Pet007,
You should be able to just change the file it saves to's extension to .doc. You'll notice there is a define for txt, you could either change this to doc or if you still want to be able to use txt, create a new define and use this. If you do this you'll need to also add a define above (as you see it defines an integer for each different format type and uses those throughout the program as well). That should give you a good starting point for modifying this code. Unfortunately it is quite extensive to actually accomplish this, or else I could give a step by step guide, but it is rather long. But you should be able to get it working from this. The reason this should work is because Microsoft Word (.doc) files understand plain text just like .txt files. However, if you want to add formatting (fonts, bold text, etc) you would need to use the ActiveX Instrument for CVI which just access the ActiveX server from Microsoft. For more information about ActiveX in CVI visit the following link.
Using LabWindows/CVI as an ActiveX Automation Controller to Control Automation ServersAlso, this link gives an example of using Excel with CVI through ActiveX, which may give you some useful information about doing this type of thing.
Embed Excel ActiveX Documents on a CVI PanelFor more information on using Word's ActiveX Server, check out the following Microsoft Portal.
Word Developer Portal
Brandon Vasquez | Software Engineer | Integration Services | National Instruments

How to load bookmark tree in initial view setting by pdfmark reference

how to load bookmark tree in initial view setting by pdfmark reference

You are talking about two different completely unrelated things here: The
initial view (which can be modified in an epilogue.ps file) and the actual
bookmark setup (which is done in the PostScript file, and not in the
epilogue file). You can change which navigation pane gets displayed
when the PDF file is opened, but only the application that creates the
bookmarks as access to he setting that defines if the bookmark is expanded
or not.
By the time the epilogue file runs, you don't "know" which bookmarks were
created. You can know that if you redefine the pdfmark command in
PostScript, and then modify the parameters that are passed to the real
pdfmark operator.
Another option would be to add JavaScript that controls the state of your
bookmarks that gets executed the first time the document is opened. This
will however only work in Adobe Acrobat, not the free Reader (the open
property is read-only in Reader).
The simplest way to get your bookmarks in the correct state, is to create
your PDF files and then run an action on them to expand the bookmark tree.
Karl Heinz Kremer
PDF Acrobatics Without a Net
PDF Software Development, Training and More...
[email protected]
http://www.khkonsulting.com
On Mon, Feb 24, 2014 at 7:44 AM, Manoranjan.Parhi

Batch create multiple pdf's while using epilogue.ps for setting initial view and opening bookmarks

Hi,
I'm trying to batch create multiple pdf's from word files, and use the epilogue.ps file for setting the initial view and opening the bookmarks panel, but i keep getting no satisfying result.. i'm probably missing something fundamental.
I've read some forum posts and adobe help posts explaining this, so i'm pretty sure this would be possible?
Reference:
http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7f0f.w .html see advanced panel options
http://help.adobe.com/en_US/acrobat/using/WS58a04a822e3e50102bd615109794195ff-7f14.w.html
System: Windows 7
Acrobat: Acrobat X professional
i've searched for and found a way to overwite the epilogue.ps file and have inserted the following:
% Insert your custom PostScript here...
[ /PageMode /UseThumbs
/Page 1 /View [/Fit ]
/DOCVIEW pdfmark
After that i checked my Adobe Acrobat preferences, and in the categorie 'Convert to Pdf' i selected 'Microsoft office word' in the select area 'Converting to pdf'.
Clicked 'Edit settings' to allow creating a joboptions file (field: 'adobe pdf settings') which has the option 'Use epiloque.ps and prologue.ps' checked in the advanced section.
So now i thought i would have everyting setup to create my pdf's, however, my view isn't changed to fit, nor are there any bookmarks or in this case thumbs (i used /useThumbs) visible.
Did i miss something obvious? Is there a better way to test this? Any help would be appreciated!

i like it about that ok in how to open my site

How to convert initial view (bookmarks expanded) in over 1000 pfd files?

Similar Messages

Maybe you are looking for