How to create custom button by amending template in sc and change po screen
Hi,
Can anybody tell the steps that How to create custom button by amending the template in shopping cart or change purchase order screen.
Full points for the answer.
Edited by: shraman saha on Aug 17, 2008 6:44 PM
Hi,
I dont have any idea what you mean by Template for "Change Purchase Order" functionality. As far as i know there is a change button on the screen using which we go to the change mode and edit the PO.
About your other query: you do not require to download any HTML pages. To see the templates for PO go through the following path:
Transaction SE80 --> Internet options --> in the drop-down enter BBP_POC (for PO) --> Topic 99 --> HTML templates.
Then look for the following templates :
SAPLBBP_PO_UI_ITS 3000 --> for header basic data
SAPLBBP_PO_UI_ITS 4000 --> for item overview
SAPLBBP_PO_UI_ITS 4100 --> for item basic data
SAPLBBP_PO_UI_ITS 2200 --> for buttons.
Make appropriate changes to the screen and then publish it before using it. It is just like activating objects.
Hope this helps.
Thanks,
Pradeep
Similar Messages
-
Is it possible to create custom buttons in CRM Ondemand?
Hi,
Is it possible to create custom buttons in CRM Ondemand in any detail page like the inbuilt buttons like 'New', 'Delete' etc? If possible then how?
Thanks
ArpitaYou can add a button using custom javascript. but this could potentially have performance issues. please test the performance and functionality if you implement a lot javascript
see this link : http://helponmyproject.com/TTOCOD/
Regards,
Royston -
How we create custom infotype and how to configure with its subtypes.
hai abap-hr gurus,
how to create custom infotype and how to configure with its subtypes. when i am creating infotypes i am not getting how to configure subtypes.
plz help me for this with an example code.
thanks..
kiran kumarHi Kiran,
Please fallow the below steps to create the custom infotype. If you have any quires let me know.
For Creation of Infotype first Go to Transaction PM01, Enter the custom Infotype number which you want to create, it should be a 4 digit number and have to start with 9xxx.
then select the `Employee Infotype' radio button
after that select the `PS Structure Infotype'
then click on Create A separate table maintenance window appears
then Create a PS structure with all the fields you want on the infotype
Save and Activate the PS structure
now Go back to the initial screen of PM01
Click on `All' push button. It takes a few moments
Click on `Technical Characteristics. Infotype list screen appears
Click on `Change'(pencil) button
Now select your Infotype and click on `Detail' (magnifying glass) button
Give `T591A' as subtype table & also Give `T591S' as subtype txt tab
Give your subtype field as subtype field & Save and come back to PM01 initial screen
Click on `Infotype Characteristics' Infotype list screen appears
Click on `Change' (pencil) button & on New Entries
and then Enter your Infotype number and short text Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference
to fill yours). Now save ur entries
Now the Infotype is created and ready to use.
If you want to change the layout of the Infotype as per your
requirement
In the PM01 initial screen Select `Screen' radio button and give
2000 as the screen name, then click on edit.
In the next screen.. Select `Layout Editor' and click `Change'.
Screen default layout appears here you can design/modify the
screen..change the attributes of the fields..etc.
Save and activate. (Don't forget to `Activate at every level)
Regards,
Ramakrishna kotha. -
How to Created custom report for Ship not Billed (SD/FI)?
Hi all,
I am anticipating to write some abap reports..Here is one of them..
Anyone can help me with writing a Report , how to do 'Custom Report for shipped not Billed(SD/FI)' ..But since I am new to Abap , if you wish to reply, please use a little more detail and simple explanation, step by step so I can understand what is the idea, how it can be acheived...what kind of report should be used , techniques, tables etc...:)
Appreciate your help!
Regards,
BobyHi Boby,
You need to create custom transaction to achive these results.
you will have selection-screen ,it would be :
Date : Here date would be mandatory - Ranges Option
Customer - Optional field - Ranges
Order # Sales Order (Optional) Ranges
Invoice # - Invoice # (Optional) Ranges
You will get the data based on ur selection-screen criteria ...
First you will have customer order details from diffrent table
VBAK,
VBAP,
LIKP
LIPS
VBRK,
VBRP
KNA1,
VBFA Tables ( See the my sample program )
Output would be :
Customer # Custome Name Order # Delivery # Invoice # Netpr, Netquantity ,
Check the condition whether invoice table has VBRK-RFBSK = ''.
See the my sample program : This is sales report by monthly..
REPORT ZFDSALES_REPORT no standard page heading
message-id zwave.
Data Declaration Part
TYPE-POOLS
type-pools : slis.
Tables
tables : VBAK,
VBAP.
Internal table for VBAK Table
data : begin of i_vbak occurs 0,
vbeln like vbak-vbeln,
bstnk like vbak-bstnk,
vdatu like vbak-vdatu,
end of i_vbak.
Internal table for VBAP and MATNR
data : begin of i_vbap occurs 0,
vbeln like vbap-vbeln,
matnr like vbap-matnr,
kdmat like vbap-kdmat,
kwmeng like vbap-kwmeng,
netpr like vbap-netpr,
maktx like makt-maktx,
end of i_vbap.
Internal tables
data : begin of i_sales occurs 0,
vdatu like vbak-vdatu,
bstnk like vbak-bstnk,
matnr like vbap-matnr,
maktx like makt-maktx,
kdmat like vbap-kdmat,
kwmeng like vbap-kwmeng,
netpr like vbap-netpr,
end of i_sales.
Variable for ALV
data : v_repid like sy-repid,
gt_fieldcat type slis_t_fieldcat_alv.
Selection-screen
selection-screen : begin of block blk with frame title text-001.
select-options : s_vbeln for vbak-vbeln,
s_erdat for vbak-erdat,
s_ernam for vbak-ernam,
s_vdatu for vbak-vdatu obligatory,
s_BSTNK for vbak-BSTNK,
s_KUNNR for vbak-kunnr,
s_matnr for vbap-matnr,
s_KDMAT for vbap-KDMAT.
selection-screen : end of block blk.
Initilization
initialization.
v_repid = sy-repid.
S T A R T - O F - S E L E C T I O N ****************
start-of-selection.
Get the data from VBAK and VBAP Tables
perform get_vbak_vbap.
E N D - O F - S E L E C T I O N *****************
end-of-selection.
Display the data
perform dispolay_data.
*& Form get_vbak_vbap
Get the data from VBAK and VBAP Table
FORM get_vbak_vbap.
Get the data from VBAK Table
select vbeln bstnk vdatu from vbak into table i_vbak
where vbeln in s_vbeln
and bstnk in s_bstnk
and vdatu in s_vdatu
and kunnr in s_kunnr
and erdat in s_erdat
and ernam in s_ernam.
if sy-subrc ne 0.
message e000(zwave) with 'No data found for given selection'.
endif.
Get the data from VBAP Table
select avbeln amatnr akdmat akwmeng a~netpr
b~maktx into table i_vbap
from vbap as a inner join makt as b on bmatnr = amatnr
for all entries in i_vbak
where a~vbeln in s_vbeln
and a~kdmat in s_kdmat
and a~abgru = space
and a~matnr in s_matnr
and a~matnr ne '000000000000009999'
and a~matnr ne '000000000000004444'
and a~matnr ne '000000000000008888'
and a~matnr ne '000000000000001111'
and a~werks = '1000'
and b~spras = 'E'
and a~vbeln = i_vbak-vbeln.
if sy-subrc ne 0.
message e000(zwave) with 'No data found for given selection'.
endif.
sort i_vbak by vbeln.
sort i_vbap by vbeln matnr.
loop at i_vbap.
read table i_vbak with key vbeln = i_vbap-vbeln
binary search.
if sy-subrc eq 0.
i_sales-bstnk = i_vbak-bstnk.
i_sales-vdatu = i_vbak-vdatu.
i_sales-matnr = i_vbap-matnr.
i_sales-kdmat = i_vbap-kdmat.
i_sales-maktx = i_vbap-maktx.
i_sales-netpr = i_vbap-netpr.
i_sales-kwmeng = i_vbap-kwmeng.
append i_sales.
else.
continue.
endif.
clear : i_sales,
i_vbap,
i_vbak.
endloop.
sort i_sales by vdatu bstnk matnr.
refresh : i_vbap,
i_vbak.
ENDFORM. " get_vbak_vbap
*& Form dispolay_data
Display the data
FORM dispolay_data.
Fill the Fiedlcat
PERFORM fieldcat_init using gt_fieldcat[].
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = v_repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT =
IT_FIELDCAT = gt_fieldcat[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_ALV_GRAPHICS =
IT_ADD_FIELDCAT =
IT_HYPERLINK =
I_HTML_HEIGHT_TOP =
I_HTML_HEIGHT_END =
IT_EXCEPT_QINFO =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = i_sales
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
ENDFORM. " dispolay_data
*& Form fieldcat_init
text
-->P_GT_FIELDCAT[] text
FORM fieldcat_init USING e01_lt_fieldcat type slis_t_fieldcat_alv.
DATA: LS_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
Delivery Date
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'VDATU'.
LS_FIELDCAT-OUTPUTLEN = 12.
LS_FIELDCAT-TABNAME = 'I_SALES'.
ls_fieldcat-seltext_L = 'Delivery Date'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Purchase Order #Material Description
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'BSTNK'.
LS_FIELDCAT-OUTPUTLEN = 25.
LS_FIELDCAT-TABNAME = 'I_SALES'.
ls_fieldcat-seltext_L = 'Purchase Order #'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Material
CLEAR LS_FIELDCAT.
LS_FIELDCAT-REF_FIELDNAME = 'MATNR'.
LS_FIELDCAT-REF_TABNAME = 'MARA'.
LS_FIELDCAT-FIELDNAME = 'MATNR'.
LS_FIELDCAT-TABNAME = 'I_SALES'.
ls_fieldcat-seltext_L = 'Material #'.
ls_fieldcat-seltext_M = 'Material #'.
ls_fieldcat-seltext_S = 'Material #'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Material Description
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'MAKTX'.
LS_FIELDCAT-OUTPUTLEN = 40.
LS_FIELDCAT-TABNAME = 'I_SALES'.
ls_fieldcat-seltext_L = 'Material Description'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Customer Material #
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'KDMAT'.
LS_FIELDCAT-OUTPUTLEN = 35.
LS_FIELDCAT-TABNAME = 'I_SALES'.
ls_fieldcat-seltext_L = 'Customer material no.'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Quantity
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'KWMENG'.
LS_FIELDCAT-OUTPUTLEN = 15.
LS_FIELDCAT-TABNAME = 'I_SALES'.
ls_fieldcat-seltext_L = 'Quantity'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Net Price
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'NETPR'.
LS_FIELDCAT-OUTPUTLEN = 15.
LS_FIELDCAT-TABNAME = 'I_SALES'.
ls_fieldcat-seltext_L = 'Net Price'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
ENDFORM. " fieldcat_init
Reward Points if it is helpful
Thanks
Seshu -
How to create custom infotype for training and event management
hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
PS No PA0000-> PERNR
Name - PA0001 -> ENAME
IS PS.No. PA0001-> PS no. of Immediate Superior
IS name PA0001 -> ENAME
thanx in advance
afzalHi,
Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
If you wish to create a PD infotype, use transaction PPCI to create the infotype.
But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
If you wish to create a PA infotype, use transaction PM01 to create the infotype.
But before that you may be required to create a strcuture PSnnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
Regards,
Srini -
How to create custom content placeholder in sharepoint 2013
Hi, I would like to create custom content placeholder don't know how to and add to my custom master page in sharepoint 2013. I have no luck searching on how to create custom content placeholder, any help?
Thanks,
JohnwebHi,
If you’re not fixed your requirement with the Out of the box SharePoint place holders, you can create as many as you want as long as the ID doesn’t conflict. On the master page add the content place holder
<asp:ContentPlaceHolderid="CustomName" runat="server"></asp:ContentPlaceHolder> and add this to your page layout
<asp:Contentrunat="server" ContentPlaceHolderID="CustomName"></asp:Content>.
I suggest you provide your basic requirement for further research.
If you want to customize a master page, the Rajendra's method would be helpful.
Best Regards,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
How to create custom adapter for Products and CommerceService
Hi guys!
First of all I wanted to say that I did search. Only relevant material I found was this http://dev.day.com/docs/en/cq/5-5/ecommerce/eCommerce-framework.html
Unfortunately it doesn't go in details enough...
I'm trying to follow geometrixx-outdoors example to create my shoppingCart. I have a list of of products in /etc/commerce/products.... referenced by productPage in content.
But I don't know how to create custom CommerceProvider and Adapter to create proper Product objects - it always picks up geoProductImpl.
As I understand I need to specify cq:commerceProvider to myProvider and then I need to somehow register MyProvider so it gets picked up.
Also I guess I need to add MyProductAdapter somehow so when shoppingCart executes following it returns my implementation instead of geoProductImpl.
Product product = productResource.adaptTo(Product.class);
I'd really appreciate if anyone could share an example or point me in the right direction for a guide.
Cheers
KostyaHi Kostya,
Look at this presentation recorded at http://dev.day.com/ddc/en/gems/commerce-framework.html
Thanks,
Sham -
How to create SAVE button in Workbook using BI IP Functionality
Hi All,
I have Real-time Infocube (ZCUBSDID) with me. Planning has been done on the cube using BI-IP (like Aggregation level, filter, planning function and planning sequence are present there).
As an Input i have everything in Quality system like I can access query in Bex Anlyzer (Input Ready Query) and also i have workbook associated with the query. SAVE button is also present on workbook which is giving result based on fiscal year and version.
Now my task is to create workbook on Development system with the same functionality as Quality System.
I have same Query available on DEV system also. I created new Workbook but SAVE button is not available in my workbook.
Can anyone suggest how to create SAVE button in my new workbook.
I am new in IP side so please let me know if i can get any help from workbook which is already present in Quality system.
Which type of analysis i should do to come out with solution.....otherwise let me know step by step procedure to create SAVE button on workbook using BI-IP functionality.
It will be great help. My advance thanks goes to you people.
Thanks,
Rupali SinghCheck points 19 & 20 on this link http://help.sap.com/saphelp_nw2004s/helpdata/en/43/a033e0f56e21b5e10000000a1553f6/frameset.htm.
Command to be called on SAVE button is SAVE_AREA as explained in the point 20.
Regards,
Deepti -
How Tou2026 Create Custom Application in E-Commerce 7.0?
Hi all,
We want to set up SAP E-Commerce for ERP 7.0. For SAP E-Commerce for ERP 5.0 the following configuration guide is available:
How Tou2026 Create Custom Application in E-Commerce 5.0
What about SAP E-Commerce for ERP 7.0? Is this guideline also valid for 7.0?
If not, where can I find the corresponding configuration guideline for SAP E-Commerce for ERP 7.0 (on the SAP Service Marketplace?)?
Thanks in advance.
Regards,
AVHello Av,
Please see the Development and extension guide @
http://service.sap.com/crm-inst
=> Release 7.0
=> Operate
Regards
Mark -
How to create custom report in crm 2013
Hi,
I want to create custom report in crm 2013. I want to show Contact information in report. My scenario is that when I select multiple record and run report then contact information show in different pages. I want to show record in textbox in report. Here
is an example of display recordHi Aamir,
Have a look at below link it shows step by step how to create custom SSRS report.
http://www.njevity.com/blog/creating-dynamics-crm-2011-reports-sql-reporting-services-pre-filtering-and-default-filters
It tells using fetchxml, you can use SQL query as well. You need to use pre filtering to run report on selected record.
Thanks,
Prasad
Make sure to "Vote as Helpful" and "Mark As Answer",if you get answer of your question. -
How to create custom report plugin using child region report metadata
Hi,
I want to ask for help on how to create custom report plugin using child region report metadata. My idea is to create a child region, a classic report and set the condition to never.
Then i will query the child report metadata from apex view and use it to create a custom report like using jquery jq-grid. Any idea how i can create a process that will use the child report
metadata? I dont know how i can create a process just like how apex work, how apex render report, coz i want it to be control using the standard apex report attribute. This plugin will
render according to the child report attribute.
Is there anybody here had ever done this?Hi Nicolette,
Thanks for the reply. I know where to find the metadata, just asking for idea on how the rendering process will be.
Start from determining column heading, column order until finish rendering the report. The same way how apex
render the classic report.
Previously this imy my rendering process:
FUNCTION GETCOLUMN(P_REGION IN APEX_PLUGIN.T_REGION,
P_PLUGIN IN APEX_PLUGIN.T_PLUGIN,
P_VALUE IN VARCHAR2) RETURN SYS.DBMS_SQL.DESC_TAB2 IS
VSQLHANDLER APEX_PLUGIN_UTIL.T_SQL_HANDLER;
VCOLCOUNT NUMBER;
VCOLNAMES VARCHAR2(2000);
VAJAXIDENTIFIER VARCHAR2(100);
VPAGESIZE TYPEATTR := P_REGION.ATTRIBUTE_04;
VJSCODE VARCHAR2(32767);
BEGIN
VSQLHANDLER := APEX_PLUGIN_UTIL.GET_SQL_HANDLER(P_SQL_STATEMENT => 'select * from s_emp',
P_MIN_COLUMNS => 1,
P_MAX_COLUMNS => 999,
P_COMPONENT_NAME => P_REGION.ID);
VCOLCOUNT := VSQLHANDLER.COLUMN_LIST.COUNT();
FOR I IN 1 .. VCOLCOUNT LOOP
VCOLNAMES := VCOLNAMES || '{name: "' ||
UPPER(VSQLHANDLER.COLUMN_LIST(I).COL_NAME) || '",';
END LOOP;
APEX_PLUGIN_UTIL.FREE_SQL_HANDLER(VSQLHANDLER);
RETURN VSQLHANDLER.COLUMN_LIST;
EXCEPTION
WHEN OTHERS THEN
APEX_PLUGIN_UTIL.FREE_SQL_HANDLER(VSQLHANDLER);
RAISE;
END GETCOLUMN;
So this is how i get the header for my report plugin. The same method is use to get the value / data for each column. This process is work. So now
i want to extend my plugin so that i will use all attributes from the child report to render my plugin. So the column header, column order, all will depend
on the child report. And the column display condition is set, it will also check the condition before render the column. Sounds like i want to reinvent
the normal apex rendering process but this is what i want to achieve.
I need help to find the correct logic for my render process. Don't want too much for starting, just want to render the plugin correctly, same with child report,
same columns alias, column ordering and column conditional display.
Thanks,
akulala -
How to create custom(or) user defined component in SAPTAO
Hi,
Please provide me some document or steps on how to create custom component in sap tao.
Thanks a lot in advance.
Regards,
SudhaHi,
If you want create any custom components, you should use SAP QTP to create it.
Here are the simple steps:
i) Go to QTP -> Click on New - > Select Scripted Component - > ((Select SAP_Doc) area (i.e. whatever application area you have created for SAP TAO installation)) -> Record or Write a script based on your requirement & save
ii) Go to QC -> BPT -> open above component and insert the parameters and call these values in QTP script level (either way you can do)
iii) Create a datasheet and declare the parameters in datasheet and call this sheet whenever you have required.
Good luck.
Ram -
How to create customized F4 Help of InfoObject in BW
Hi, buddies
Does anyone know how to create customized F4 help for an InfoObject?
What I need to do is when user clicks F4 help on the variable screen of query, only certain master data values should be displayed, not all of them.
Currently, I can only make setting in InfoObject to restrict the F4 value either in master data or in Cube. I couldn't create a customized F4 value list.
Thanks,
WeiHi,
i have H4 Help problem.
how can i restrict an attributes of infoobject in H4 Help value.
Please help me
Madhu -
Hi,
How to create custom calendar in Webdynpro Abap ?.
Regards,
NarasimhaThe best way I see here is to develop your custom calender in any of the UI technologies supported like Flash (flex) or HTML5 (or maybe even SilverLight? not sure) and embed it in your WD view. You can also handle interactions between the embedded component and the WD controller.
Regards,
Raghavendra -
Hi,
Can any one tell me how to create a button widget,
I've created one & it can be seen in my plugin, but it doesn't work,
in .fr file i created the widget as,
ButtonWidget
kEXTCODGoButtonWidgetID,
kSysButtonPMRsrcId,
kBindNone, // Binding ,kBindRight | kBindBottom,
Frame(50,70,140,90) // Frame (l,t,r,b)
kTrue, kTrue, // Visible, Enabled
"Run", // PNGIconAttributes, new for InDesign 3.0
in DialogObserver.cpp
for AutoAttach & AutoDetach,,
AttachToWidget(kEXTCODGoButtonWidgetID, IID_ITRISTATECONTROLDATA, panelControlData)
DetachFromWidget(kEXTCODGoButtonWidgetID, IID_ITRISTATECONTROLDATA, panelControlData);
in ::update
WidgetID theSelectedWidget = controlView->GetWidgetID();
if (theChange == kTrueStateMessage)
//if (theSelectedWidget == kEXTCODGoButtonWidgetID
switch(theSelectedWidget.Get())
case kEXTCODGoButtonWidgetID:
this->ViewOutput();
break;
please tell me what may be the wrong...Hi,
Do you have any idea about how to get the class name (ex: kSplineItemBoss) from a ClassID.
I know how to get the class id;
ClassID unknownClassID = ::GetClass(unknown);
I found it from an example..
now i want to know which class name related to that ClassID..
Thanks.
Maybe you are looking for
-
G5 No power, only 1st LED on at test
hi, I have read many of the posts here relating to Imac g5 not starting up. I have the same problem. I have a g5 ALS. I did the LED test. The first LED comes on but the second LED would not flicker or come on. So, I concluded (from the apple support
-
How to TRansport the new 4 entries of Z_VIEW??
Hi Experts, I added 4 new entries in z_view, which delivary class is C - customising. Now, I need to move these 4 entries to QA box. So, how to do get it done? I tried, with Transport push button, but, am getting the error that, "Specified data is no
-
Hi Gurus, I have switched on the HR info type logging in my server. Now is there any way i can refresh the log after a specific period of time.? What is the table name that it will populate when when creating the logs Please update ASAP. Thanks and r
-
ClassCastException: weblogic.security.acl.internal.FileRealm
Hi, I am trying to create new user through the CachingRealm.newUser(?,?,?) method..What I do is - weblogic.security.acl.BasicRealm baseRealm = (weblogic.security.acl.BasicRealm)weblogic.security.acl.Security.getRealm(); weblogic.security.acl.CachingR
-
Buyer claims I sold Final Cut Studio 3 with fake serial #
so I purchased a copy of FCP in 2010, from a buyer on eBay (brand new, sealed). I installed and used it for a couple years, and recently sold it on eBay. the buyer claims that the serial number sticker was "fake" and printed on a home computer. the b