How to export question

Quick question, I recently upgraded from FCE 2 to FCE 3.5HD. Before, when I was done with a project I would just export the sequence to Compressor and it would launch Compressor and have the sequence loaded in Compressor. Now with FCE 3.5, when I export my sequence, it launches Compressor, but it is blank. I do not know how to get me finished sequence in there....any help would be appreciated....

Export your movie as QT-movie, non-self contained or self contained (bigger file).
Open compressor and import the file.
Frank

Similar Messages

Hello! pleas help me ;) Question: how to export Project (slide show) from Iphoto (iphone) to desktop (windows)? Second - I export Procejct to Icloud - where I find this?

Hello!
Pleas help me!
Problem: How to export Project (slide show) from IPhoto (Iphone) to other computer with windows?
Second: How to save this project in Iphone?
Next: I export this Project to ICloud. Where I will find this?
regards
Jerry

Hi jerryj69,
Welcome to the Support Communities!
The link below to the iPhoto for iOS manual covers many of these topics.
iPhoto Help: Ways to share photos
http://help.apple.com/iphoto/iphone/2.0/#blnk7d8f763e
Ways to share photos
Using iPhoto on your device, you can share your photos in many ways:
Send photos to other devices
Beam photos, albums, events, journals, and slideshows (send wirelessly) from your device to another iOS device with iPhoto installed. Beaming shares photos in full resolution.
If you have a device that supports AirDrop, you can send photos wirelessly to other iOS devices that use AirDrop. You can use AirDrop to share photos, albums, events, journals, and slideshows. AirDrop shares photos in full resolution.
If you have an iCloud account and you’ve set up My Photo Stream, photos you save to the Camera Roll are sent to all of your devices.
Use photos in other apps on your device
Send your photos to other apps installed on your device, including iMovie and other iPhoto-supported apps.
Use your photos in any app by saving them to the Camera Roll.
Send photos to your computer
Import photos directly into iPhoto or Aperture on your computer.
Save photos to your computer using iTunes.
Share photos on the web
Post photos to your Twitter, Flickr, or Facebook accounts directly from iPhoto. You can add comments when you post photos using iPhoto.
Create a web journal with your photos and publish your journal as a webpage using your iCloud account.
Create a slideshow with your photos and publish your sllideshow as a webpage using your iCloud account.
Email, display, and print photos
Send an email with your photos.
Share photos using the Messages app on your device.
Present your photos as a slideshow with music and transition effects.
View photos on an external display using an HDMI cable adapter or on a TV using AirPlay and Apple TV.
Print photos from your device to a printer that supports AirPrint. Tap > Print and select a printer.
Create books of your photos and order professionally printed and bound copies of them.
Order professional-quality prints, and have them delivered to an address you specify.
Cheers,
- Judy

How to export a data as an XML file from oracle data base?

could u pls tell me the step by step procedure for following questions...? how to export a data as an XML file from oracle data base? is it possible? plz tell me itz urgent requirement...
Thankz in advance
Bala

SQL> SELECT * FROM v$version;
BANNER
Oracle DATABASE 11g Enterprise Edition Release 11.1.0.6.0 - Production
PL/SQL Release 11.1.0.6.0 - Production
CORE    11.1.0.6.0      Production
TNS FOR 32-bit Windows: Version 11.1.0.6.0 - Production
NLSRTL Version 11.1.0.6.0 - Production
5 rows selected.
SQL> CREATE OR REPLACE directory utldata AS 'C:\temp';
Directory created.
SQL> declare
2    doc DBMS_XMLDOM.DOMDocument;
3    xdata XMLTYPE;
4
5    CURSOR xmlcur IS
6    SELECT xmlelement("Employee",XMLAttributes('http://www.w3.org/2001/XMLSchema' AS "xmlns:xsi",
7                                  'http://www.oracle.com/Employee.xsd' AS "xsi:nonamespaceSchemaLocation")
8                              ,xmlelement("EmployeeNumber",e.empno)
9                              ,xmlelement("EmployeeName",e.ename)
10                              ,xmlelement("Department",xmlelement("DepartmentName",d.dname)
11                                                      ,xmlelement("Location",d.loc)
12                                         )
13                   )
14     FROM   emp e
15     ,      dept d
16     WHERE e.DEPTNO=d.DEPTNO;
17
18 begin
19    OPEN xmlcur;
20    FETCH xmlcur INTO xdata;
21    CLOSE xmlcur;
22    doc := DBMS_XMLDOM.NewDOMDocument(xdata);
23    DBMS_XMLDOM.WRITETOFILE(doc, 'UTLDATA/marco.xml');
24 end;
25 /
PL/SQL procedure successfully completed.
.

How to export and import dependent tables from 2 different schema

I have a setup where schema1 has table 1 and schema 2 has table2. And table 1 from schema1 depends upon table 2 from schema 2.
I would like to export and import these tables only and not any other tables from these 2 schemas with all information like grants,constraints.
Also will there be same method for Oracle 10g R1,R2 and Oracle 11G.
http://download.oracle.com/docs/cd/B12037_01/server.101/b10825/dp_export.htm#i1007514
Looking at this For table mode it says
Also, as in schema exports, cross-schema references are not exported
Not sure what this means.
As I am interested in only 2 tables I think I need to use table mode. But if I try to run export with both tables names, it says table mode support only one schema at a time. Not sure then How would the constraints would get exported in that case.
-Rohit

worked for my 1st time I tried
exp file=table2.dmp tables="dbadmin.temp1,scott.emp"
Export: Release 10.2.0.1.0 - Production on Mon Mar 1 16:32:07 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Username: / as sysdba
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
Export done in US7ASCII character set and AL16UTF16 NCHAR character set
server uses WE8ISO8859P1 character set (possible charset conversion)
About to export specified tables via Conventional Path ...
Current user changed to DBADMIN
. . exporting table TEMP1 10 rows exported
EXP-00091: Exporting questionable statistics.
Current user changed to SCOTT
. . exporting table EMP 14 rows exported
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
Export terminated successfully with warnings.

How to export some data from the tables of an owner with integrity?

Hi to all,
How to export some data from the tables of an owner with integrity?
I want to bring some data from all tables in a single owner of the production database for development environment.
My initial requirements are: seeking information on company code (emp), contract status (status) and / or effective date of contract settlement (dt_liq_efetiva) - a small amount of data to developers.
These three fields are present in the main system table (the table of contracts). Then I thought about ...
- create a temporary table from the query results table to contract;
- and then use this temporary table as a reference to fetch the data in other tables of the owner while maintaining integrity. But how? I have not found the answer, because: what to do when not there is the possibility of a join between the contract and any other table?
I am considering the possibility of consulting the names of tables, foreign keys and columns above, and create dynamic SQL. Conceptually, something like:
select r.constraint_name "FK name",
r.table_name "FK table",
r.column_name "FK column",
up.constraint_name "Referencing name",
up.table_name "Referencing table",
up.column_name "Referencing column"
from all_cons_columns up
join all_cons_columns r
using (owner, position), (select r.owner,
r.constraint_name fk,
r.table_name table_fk,
r.r_constraint_name r,
up.table_name table_r
from all_constraints up, all_constraints r
where r.r_owner = up.owner
and r.r_constraint_name = up.constraint_name
and up.constraint_type in ('P', 'U')
and r.constraint_type = 'R'
and r.owner = 'OWNERNAME') aux
where r.constraint_name = aux.fk
and r.table_name = aux.table_fk
and up.constraint_name = aux.r
and up.table_name = aux.table_r;
-- + Dynamic SQL
If anyone has any suggestions and / or reuse code to me thank you very much!
After resolving this standoff intend to mount the inserts in utl_file by a table and create another program to read and play in the development environment.
Thinking...
Let's Share!
My thanks in advance,
Philips

Thanks, Peter.
Well, I am working with release 9.2.0.8.0. But the planning is migrate to 10g this year. So my questions are:
With Data Pump can export data just from tables owned for me (SCHEMAS = MYOWNER) parameterizing the volume of data (SAMPLE) and filters to table (QUERY), right? But parameterizing a contract table QUERY = "WHERE status NOT IN (2,6) ORDER BY contract ":
1º- the Data Pump automatically searches for related data in other tables in the owner? ex. parcel table has X records related (fk) with Y contracts not in (2,6): X * SAMPLE records will be randomly exported?
2º- for the tables without relation (fk) and which are within the owner (MYOWNER) the data is exported only based on the parameter SAMPLE?
Once again, thank you,
Philips
Reading Oracle Docs...

How to export an XML file from oracle database?

plz help me its urgent requirement....could u pls tell me the step by step procedure for following questions...?how to export a data as an XML file from oracle database?
thanks in advance,
Bala.
Edited by: user3523292 on Nov 14, 2008 5:43 AM

user3523292 wrote:
plz help me its urgent requirement....could u pls tell me the step by step procedure for following questions...?how to export a data as an XML file from oracle database?
thanks in advance,
Bala.
Edited by: user3523292 on Nov 14, 2008 5:43 AMThis is a forum of volunteers. There is no "urgent" here. Nevertheless, a google search of 'xml oracle export' quickly lead me to this Oracle site:
otn.oracle.com/sample_code/tech/xml/index.html
I also see lots of hits when I search the documentation library at tahiti.oracle.com for 'xml'. This one in particular may be what you are looking for:
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14252/adx_j_xsu.htm#ADXDK070

How to export internal table and pass the internal table to another screen?

Hi,
I have a sql SELECT statement that select data from table into internal table. I would like to export out the internal table and pass to another screen and display the data in ALV list. How to export it out? I try but the error given was " The type of "OUT_SELECT_ITAB" cannot be converted to the type of "itab_result".
Another question is, how to pass the internal table that i export out from the function module to another screen?
Here is the code
==============================================================
FUNCTION ZNEW_SELECT_ZSTUD00.
""Local Interface:
*" IMPORTING
*"     REFERENCE(IN_SELECT_YEAR) TYPE ZSTUD00-EYEAR
*" EXPORTING
*"     REFERENCE(OUT_RESULT) TYPE CHAR9
*"     REFERENCE(OUT_SELECT_ITAB) TYPE ZSTUD00
*& Global Declarations
DATA: itab TYPE ZSTUD00,
      itab_result TYPE TABLE OF ZSTUD00.
*& Processing Blocks called by the Runtime Environment
itab-eyear = IN_SELECT_YEAR.
SELECT *
FROM ZSTUD00
INTO TABLE itab_result
WHERE eyear = IN_SELECT_YEAR.
IF sy-subrc = 0.
out_result = 'Success'.
OUT_SELECT_ITAB = itab_result.
ELSE.
out_result = 'Fail'.
ENDIF.
ENDFUNCTION.
===============================================================
Please advise. Thanks
Regards,
Rayden

Hi Nagaraj,
I try to change it in Tables tab page but it state that TABLES parameters are obsolete. when i "Enter". I try to "Enter" again. it seem to be ok but it stil give me the same error.
================================================================
FUNCTION ZNEW_SELECT_ZSTUD00.
""Local Interface:
*" IMPORTING
*"     REFERENCE(IN_SELECT_YEAR) TYPE ZSTUD00-EYEAR
*" EXPORTING
*"     REFERENCE(OUT_RESULT) TYPE CHAR9
*" TABLES
*"      OUT_SELECT_ITAB STRUCTURE ZSTUD00
*& Global Declarations
DATA: itab TYPE ZSTUD00,
      itab_result TYPE TABLE OF ZSTUD00.
*& Processing Blocks called by the Runtime Environment
itab-eyear = IN_SELECT_YEAR.
SELECT *
FROM ZSTUD00
INTO TABLE itab_result
WHERE eyear = IN_SELECT_YEAR.
IF sy-subrc = 0.
out_result = 'Success'.
OUT_SELECT_ITAB = itab_result.
ELSE.
out_result = 'Fail'.
ENDIF.
ENDFUNCTION.
===============================================================
regards,
Rayden

How to export photo to external hard drive? (time capsule 3t)?

cant find photo in hard drive. where does iphoto store photo? i looked for the foler everwhere....

how to export photo to external hard drive? (time capsule 3t)?
Simple - launch iPhoto, select the phtoos and export (file menu ==> export) to the destination of yoru choice - see the user tip onexporting for details on the export optiopns - https://discussions.apple.com/community/ilife/iphoto?view=documents
However is the Time Capsule being used for Time Machine backups? If it is do not use it as an external drive too - it needs to be dedicated to one use only
cant find photo in hard drive. where does iphoto store photo? i looked for the foler everwhere....
And this is a totally different question - by default in your iPhoto library - and to access then see the user tip on accessing yoru iPhoto files - https://discussions.apple.com/community/ilife/iphoto?view=documents
You never access them directly - always using the supported access methods
LN

How to Export in 1440p (2560x1440 - H.264 for YouTube)?

Hey,
can someone tell me how to export in 2560x1440 (so 1440p) in H.264 format? I would like to uplod it to youtube in 1440p but i can't find a preset and the if i manually change the resolution it stopps around 2000, i can't get 2560 as widh...
I read this one alrady: http://forums.adobe.com/thread/1109729 but couldn't find the stuff.
I'm using Premiere Pro CC 7.2.1
Thank's for any help,
MFG H. im G.

I wasn't scolding you in any way, just suggesting. Sorry if it came out other than I intended.
The value in using the old thread is that if you have that question, perhaps others will too. So it is generally better to keep questions in the older thread, if they are directly on topic like this one was.

How to Export Team Site Site Pages to .aspx and for subsequent upload to other Team Site and Web Part Customisation included. (Powershell)

Hi guys,
Can i please technically know how to export an .aspx file (in Site Pages library of a team site) to local file?
Basically, SharePoint Designer has this feature "Export File"
i Need exactly the same feature that can be done in Powershell
I tried the following
$web = get-spweb "MY URL"
$folder = $web.GetFolder("SitePages")
$files = $folder.files
#trying to download the first file
[System.IO.File]::WriteAllBytes("C:\\LocalPath",$files[0].OpenRead(),$true)
The file exported via this method is Clean HTML without the Web Part Customisation!
I NEED the web part customisation in the exported files.
Sample downloaded via above script

<tr>
<td id="_invisibleIfEmpty" name="_invisibleIfEmpty" valign="top" height="100%"> <WebPartPages:WebPartZone runat="server" Title="loc:LeftColumn" ID="LeftColumn" FrameType="TitleBarOnly"/> </td>
<td id="_invisibleIfEmpty" name="_invisibleIfEmpty" valign="top" height="100%"> <WebPartPages:WebPartZone runat="server" Title="loc:MiddleColumn" ID="MiddleColumn" FrameType="TitleBarOnly"/> </td>
<td id="_invisibleIfEmpty" name="_invisibleIfEmpty" valign="top" height="100%"> <WebPartPages:WebPartZone runat="server" Title="loc:RightColumn" ID="RightColumn" FrameType="TitleBarOnly"/> </td>
</tr>

I tried using WebRequest, it returns the End HTML, which is not working too.
Please if anyone has done this? Or is there any SharePoint Designer Developer here and is willing to share how to perform the export in SharePoint Designer via Powershell? API available?
Much Appreciated!
Cheng

Hi,
According to your post, my understanding is that you wanted to export Team Site Site Pages to .aspx and for subsequent uploaded to other Team Site and Web Part Customisation included using Powershell.
You can export a specific file or object from the Export-SPWeb context.
Export-SPWeb -identity "http://sharepoint" -ItemUrl "/default.aspx" -Path "c:\default.aspx"
Import-SPWeb -identity "http://sharepoint" -Path "C:\default.aspx"
Here is a similar thread for you to take a look at:
http://sharepoint.stackexchange.com/questions/56664/how-to-download-a-sharepoint-aspx-page-from-server-using-powershell
More information:
http://technet.microsoft.com/en-us/library/ee428301(v=office.14).aspx
Best Regards,
Linda Li
Linda Li
TechNet Community Support

How to export spool file into HTML file

Hi,
I have one Oracle procedure which meets our business requirement. I am keeping the output data into a log file and I am sharing that log file to the users.
Sample Code:
spool path\logile.log
declare
begin
dbms_output.Put_line('output will come here');
end;
Now I want to spool the same output data into a HTML file and need to share with the users.
Can any one please guide me, how to export our spool data into HTML format?
Thanks in advance.

Hello 909127,
welcome to the forum.
This is the forum for the tool Oracle Reports, not a general forum for reporting. Your question might be better posted in {forum:id=75} or {forum:id=144}.
Nevertheless you need to give us more information, how your output looks like now and what you expect in HTML.
Regards
Marcus

How to export report to excel and to text file in previewer

How to export report to excel?
And, it takes long time for generate report to rtf or pdf file in previewer.
How to speed up the process? or, it's better generate report to text file directly by Run_product?
Please help!

You can generate report to tab delimite format that can be imported to excel.
As for the performance question, because reports can't specify what format when you run against previewer, so I don't know what previewer you are talking about. Generate to file is always faster than to your application previewer (assume) because you have one more step after output generated in the file: read from file and render it. Depends on the render and size of the output, it may have significant performance difference.
Thanks,
-Shaun

How to export all the views in one schema?

Hi,
I have more than 1000 views in one shcema.
How to export all the views in one schema?
Amy

Hi,
It's not a very easy question, I have develop a script wich create a script to create view from old database to new database :
/* &1: Oracle SID Source
/* &2: Oracle Schema Source
SET HEAD OFF
SET VERIFY OFF
SET PAGESIZE 0
SET LONG 40000000
SET LONGCHUNKSIZE 2000
SET LINESIZE 2000
SET FEEDBACK OFF
CREATE TABLE RECREATE_VIEW(VIEW_NAME VARCHAR2(30), TEXT LONG);
/* Selection du texte de la vue */
DECLARE
w_text long;
w_text_debut long;
w_text_column long;
w_view varchar2 (30);
w_schema varchar2 (8):='&2';
CURSOR w_cursor IS
SELECT a.view_name, a.text
FROM dba_views a
WHERE a.owner = w_schema;
CURSOR w_column IS
SELECT DECODE (ROWNUM,
1, 'CREATE OR REPLACE FORCE VIEW ' || '&' || '1..'
|| a.table_name || chr(10)
|| '('
|| a.column_name
|| DECODE (ROWNUM, nbcolumns, ')' || chr(10) || 'AS' || chr(10), ',' || chr(10))
FROM (select column_name,table_name
FROM dba_tab_columns
WHERE owner = '&1'
AND table_name = w_view
order by column_id ) a,
(SELECT COUNT (1) nbcolumns
FROM dba_tab_columns
WHERE owner = '&1'
AND table_name = w_view
GROUP BY owner, table_name) b
order by rownum;
BEGIN
OPEN w_cursor;
LOOP
FETCH w_cursor INTO w_view, w_text;
EXIT WHEN w_cursor%NOTFOUND;
w_text_debut := NULL;
w_text_column := NULL;
OPEN w_column;
LOOP
FETCH w_column INTO w_text_column;
EXIT WHEN w_column%NOTFOUND;
w_text_debut := w_text_debut || w_text_column || ' ';
w_text_column := NULL;
END LOOP;
CLOSE w_column;
w_text := w_text_debut||w_text||';';
insert into RECREATE_VIEW(VIEW_NAME, TEXT) VALUES (w_view, w_text);
COMMIT;
w_text := NULL;
w_view := NULL;
END LOOP;
CLOSE w_cursor;
END;
SPOOL scripts_views_&1..sql
PROMPT SPOOL scripts_views_&1..log
PROMPT
SELECT TEXT
FROM RECREATE_VIEW;
PROMPT
PROMPT SPOOL OFF
PROMPT
SPOOL off
PROMPT /* Formattage du fichier SQL */
!sed 's/[ ]*$//' scripts_views_&1..sql > aprilia.tmp
!rm scripts_views_&1..sql
!mv aprilia.tmp scripts_views_&1..sql
DROP TABLE RECREATE_VIEW;
EXIT
I hope that help you.
Nicolas.

How to export sql server 2000 into oracle intergrally?

1.environment:
sql server 200 - character set: CHINESE_PRC_CI_AS
tables :include ntext field (I think it equals clob)
support english,simple chinese character.
oracle 9i - character set :NLS_LANG=AMERICAN_AMERICA.US7ASCII
2. aim
export sql server objects(main is tables) into oracle intergrally
3.question:
3.1 the field which includes chinese data,after exporting,displays "????" code.
3.2 how to export sql ntext field into oracle?
thanks a lot

You need to setup your Oracle Database use character set that support Chinesre Character. For example a unicode character set AL16UTF16.
More information her
http://download-west.oracle.com/docs/cd/B19306_01/server.102/b14225/ch6unicode.htm#i1006691
Also consider use Oracle Migration Workbench to transfer SQL Server Data
http://www.oracle.com/technology/tech/migration/workbench/files/mig_rel10104.html

How to export documents of KM!

HI
You know there are many documents and files in KM.
But I want move them to a new KM Sever .
So it's a big Problem to me .
I can export some configuration. but I wonder how
to export the folder's content in KM.
Please throw some lights on this!!
Best Regards
Han

Hi again
Furthermore you could take a look at some of the recent posts by Ditlev (I'm sure those posts will answer some of your follow up questions):
How to Transport KM content and configuration from DEV to QAS?
Transporting KM folder contents
Kind regards,
Martin
Message was edited by: Martin Søgaard

How to export question

Similar Messages

Maybe you are looking for