How to extract text of info object

how to extract text of info object ?
Example text of project defination from 0PROJECT

Hi Siri,
I think you can't display the text element if you display the data in the dso.
In the dso, you will see only the key part.
So you don't have to load the infoobject text into the DSO, you just have to load the infoobject.
In Bex you have the option to see either key,text or both.
Refet the below thread for details.
Link: [Loading Master Data Text to DSO.;
Hope it helps you in clearing your doubt.
Regards,
Nikhil Joy

Similar Messages

  • How to extract TEXT for archived Purchase Orders ?

    Hi Friends,
    Can any one tell me how to extract TEXT for archived Purchase Orders ?
    I have used READ_TEXT but that is not fetching texts for archived PO's. Whenever I am trying to fetch data from STXH against archived PO, no value is coming and resulting SY_SUBRC <> 0.
    Any demo code will be highly appreciated.
    Thanks in advance..
    Sivaji

    Hi,
    You can see that table STXH is linked to archiving object MM_EKKO (you can see it in tcode DB15).
    My suggest is that you must get the data. See the demo object BC_SBOOK in tcode AOBJ. You can see the report to reload data. The object is get the data in an internal table. So for report SBOOKR you can see this function module:
    *   get data records from the data container
    *   SBOOK
        CALL FUNCTION 'ARCHIVE_GET_TABLE'
          EXPORTING
            archive_handle        = lv_handle
            record_structure      = 'SBOOK'
            all_records_of_object = 'X'
          TABLES
            table                 = lt_sbook_tmp
          EXCEPTIONS
            end_of_object         = 0.         "not entries of this type
    *   check lt_sbook_tmp entries against selections. Delete not
    *   requested entries
        LOOP AT lt_sbook_tmp ASSIGNING <ls_sbook>
                             WHERE carrid IN s_carrid
                               AND connid IN s_connid
                               AND fldate IN s_fldate.
          APPEND <ls_sbook> TO lt_sbook.
        ENDLOOP.
        REFRESH lt_sbook_tmp.
    The idea is that you get the same data that you handle in READ_TEXT (because you don't have the data in database) and recovery the text.
    I hope this helps you
    REgards
    Eduardo

  • How to extract text from a PDF file?

    Hello Suners,
    i need to know how to extract text from a pdf file?
    does anyone know what is the character encoding in pdf file, when i use an input stream to read the file it gives encrypted characters not the original text in the file.
    is there any procedures i should do while reading a pdf file,
    File f=new File("D:/File.pdf");
                   FileReader fr=new FileReader(f);
                   BufferedReader br=new BufferedReader(fr);
                   String s=br.readLine();any help will be deeply appreciated.

    jverd wrote:
    First, you set i once, and then loop without ever changing it. So your loop body will execute either 0 times or infinitely many times, writing the same byte every time. Actually, maybe it'll execute once and then throw an ArrayIndexOutOfBoundsException. That's basic java looping, and you're going to need a firm grip on that before you try to do anything as advanced as PDF reading. the case.oops you are absolutely right that was a silly mistake to forget that,
    Second, what do the docs for getPageContent say? Do they say that it simply gives you the text on the page as if the thing were a simple text doc? I'd be surprised if that's the case.getPageContent return array of bytes so the question will be:
    how to get text from this array? i was thinking of :
        private void jButton1_actionPerformed(ActionEvent e) {
            PdfReader read;
            StringBuffer buff=new StringBuffer();
            try {
                read = new PdfReader("d:/getjobid2727.pdf");
                read.getMetaData();
                byte[] data=read.getPageContent(1);
                int i=0;
                while(i>-1){ 
                    buff.append(data);
    i++;
    String str=buff.toString();
    FileOutputStream fos = new FileOutputStream("D:/test.txt");
    Writer out = new OutputStreamWriter(fos, "UTF8");
    out.write(str);
    out.close();
    read.close();
    } catch (Exception f) {
    f.printStackTrace();
    "D:/test.txt"  hasn't been created!! when i ran the program,
    is my steps right?                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • How to extract text from a PDF file using php?

    How to extract text from a PDF file using php?
    thanks
    fabio

    > Do you know of any other way this can be done?
    There are many ways. But this out of scope of this forum. You can try this forum: http://forum.planetpdf.com/

  • How to extract data from info cube into an internal table using ABAP code

    HI
    Can Anyone plz suggest me
    How to extract data from info cube into an internal table using ABAP code like BAPI's or function modules.
    Thankx in advance
    regds
    AJAY

    HI Dinesh,
    Thankq for ur reply
    but i ahve already tried to use the function module.
    When I try to Use the function module RSDRI_INFOPOV_READ
    I get an information message "ERROR GENERATION TEST FRAME".
    can U plz tell me what could be the problem
    Bye
    AJAY

  • How to locate only inactive info objects

    How to locate only inactive info objects..The table RSDIOBJ contains all the versions (M,A,D). If the objects presents in both the version( A, M) , i need not to retrieve...I need to retrieve only the objects in M but not in A. how to fetch?

    Hi
    First fetch all the objects from the table RSDIOBJ into ITAB  where OBJVERS = 'M'.
    then fetch the all objects with OBJVERS = 'A'  into ITAB1.
    loop at ITAB.
    read ITAB1 with key .. = itab-f1.
    if sy-subrc = 0.
       delete itab index sy-tabix.
    endif
    endloop.
    Now ITAb will have only the Objects with Version M but not with A.
    Reward points if useful
    Regards
    Anji

  • How to load data from info object to ODS

    Hello BW Gurus,
    Is their any way to load data from info object to ODS and I am unable to fine the Info source for that particulate info object master data.
    For ex: we have 0PROFITCENTER as info object which is getting loaded everyday. We want same data in ODS too but I don't find any info source related to this info object to create update ruled.
    Please advise me how to proceed with this,
    Thanks,
    Swathi.

    hi Swathi,
    as mentioned, if you just need the master data text or attribute update, then it's sufficient to load 0PROFITCENTER master data. (don't forget to 'apply hierarchy/attribute change' - rsa1->tools)
    if you are going to update attribute in ods with attribute from 0PROFITCENTER, you can choose look up master data attribute method in update rules.
    if the requirement is really need 0PROFITCENTER to assign to update rules, then first you have to 'generate export datasource' for infoobject 0PROFITCENTER, right click the infoobject and 'generate export datasource', then do 'replicate datasource' from bw myself, after that it will available. to display it you may go to rsa1->infosource, and menu settings->display generated objects.
    hope this helps.

  • How to load Data in Info Object

    Hi, i have a info-object Called "TYPE"
    the value for this is always going to be "S1".
    I dont want to add it manually as i want this data to get filled up automatically when transported.
    the other objects i either get it from R/3 data source or Flat file.
    Should i use a flat file to load this single data ???
    Thanks,
    GG

    Hello GG NN,
    How r u ?
    You could do this in the Transfer Rules, Click the EDIT TRANSFER RULES(Triangle with Grid) icon opposite to the InfoObject. It will show some options like InfoObject, Constant, Routine and Formula.
    Select Constant and enter the "S1" value and CONTINUE.
    SAVE & ACTIVATE the InfoSource.
    ***No, the source may be anything, the value "S1" will be transferred for this InfoObject by the Transfer Rules.
    Best Regards....
    Sankar Kumar
    +91 98403 47141

  • How to install business content Info Objects..

    Hello all.
    I am trying to do some BW extraction in our sandbox. Unfortunately I dont know how to install BC infoobjects. I have searched thru this forum but am still not fully sure. I have the source system client connected to BI. I replicated the datasources and see a ton of datasources under the UNASSIGNED NODES tree.
    Eg: How do I install the InfoObject 0Material. Can somone tell me steps..I think I can figure out the rest after that.
    Thanks in advance.

    Hi
    The Data Warehousing Workbench for installing BI Content has three navigation windows:
    In the left-hand window you determine the view of the objects in the middle area of the screen.
    In the middle window, you select the objects that you want to activate.
    In the right-hand window, you make the settings for installing the BI Content. The right-hand window also contains an overview of the objects you have selected, and it is here that you start installation of BI Content.
    In the Data Warehousing Workbench, you use the Navigation Window On/Off pushbutton in the toolbar to display or hide the left-hand navigation window. The rest of this section assumes that the left-hand navigation window is displayed.
    2. Assign Relevant Source Systems
    If you want to assign a source system, select the Source System Assignment function. The Choose Source System by Default? dialog box appears.
    Select one or more source systems by setting the corresponding indicators in the Default Assignment column.
    Only ever select the source systems that you really need, otherwise you may have to wait unnecessarily when objects are collected.
    The assignment of the source system is only relevant for source-system dependent objects (such as transfer rules, file DataSources, and InfoPackages). If more than one source system is available, only those objects assigned to the specified source system are collected ready for the transfer. Objects that have not been assigned to the specified source systems are ignored.
    For more information about the special features inherent in activating process chains that can reference source-system dependent objects, see the Customer Content documentation, under Process Chains and Process Variants.
    If you do not select a source system, all the source systems are assigned automatically. You can change your selection later using the Source System Assignment function.
    3. Group Objects To Be Included, Determine Mode of Collection for Objects
    Make the settings you require from the following selection lists on the right-hand side of the screen:
    Grouping
    Choose the objects that you want the system to include. The groupings combine the objects from a particular area. You have the following options:
    Only Necessary Objects (default setting)
    Data Flow Before
    Data Flow Afterwards
    Data Flow Before and Afterwards
    If you change the default setting (Only Necessary Objects), the new setting becomes the default setting for your user.
    The grouping selection has an impact on system performance during BI Content installation. For more information, see View of Objects and Object-Specific Recommendations.
    Collection Mode
    Select how you want to collect the objects:
    Collect Automatically (default setting): The data is collected when the objects are selected.
    Start Manual Collection: The data is only collected when you choose Collect Dependent Objects.
    Set the collection mode to Start Manual Collection. You can select all the objects without having to wait.
    4. Determine View of Objects
    In the left-hand navigation window, specify how you want the objects to be displayed. For more information, see View of Objects and Object-Specific Recommendations.
    5. Transfer the Objects to Collected Objects
    In the central area of the screen, select the objects that you want to install, and drag and drop them into the right-hand Collected Objects area of the screen.
    The Find Object function allows you to use strings of characters (for example, 0CUST) or wild card searches (for example, 0CUST_*B) to search for objects.
    Input help is available for every type of object: Double-click on the Select Objects icon in the tree structure of the corresponding object type to display the Input Help for Metadata screen. Select the required objects. Choose Transfer Selection.
    If you implement BI Service API Releases lower than 7.0 in the source system, you have to install the active version of the BI Content DataSources in the source system and replicate them in the BI system before you can use them for transferring data into BI. For more information, see Installing BI Content DataSources and Metadata Upload for SAP Systems.
    In the Collected Objects area of the screen, the system displays the selected objects and all dependent objects. Collected objects are stored by default in the repository cache. This reduces the time it takes to access these objects when you want to use them again.
    When you transfer objects into the Collected Objectsarea of the screen, these objects are also added to the tree structure of the corresponding object type in the central area of the screen and stored for your user. This personal object list can be called up each time the program is restarted.
    If you want to remove objects from your personal list, select the objects that you want to remove and choose the Remove Object from Display option from the context menu or click on the icon.
    Objects that are listed in several tree structures can only be changed in the place where they first appear. All additional instances of these objects are grayed out so you cannot modify them.
    6. Check Settings for Collected Objects
    Check the following columns in the Collected Objects area of the screen:
    Install
    The following BI Content objects are highlighted in this column by default:
    Objects that are being transferred for the first time. There is not an active version of these objects in the system.
    BI Content objects that have been redelivered in a new version. These objects can be identified by the Content time stamp in the corresponding object tables.
    When setting this indicator, check whether the checkbox refers to a folder of an individual object: If the checkbox refers to a folder, the indicator is set for all the objects that belong to this folder. If the checkbox refers to an individual object, the indicator is set for a single object and the indicators for the other objects in the folder are not changed. The same applies if you deselect this indicator.
    In the context menu, the following options are available for the installation:
    a. Install All Below
    The object in the selected hierarchy level and all objects in the lower levels of the hierarchy are selected as to Install.
    b. Do Not Install All Below
    The Install indicators are deselected for the object in the selected hierarchy level and all objects in the lower levels of the hierarchy.
    Match (X) or Copy
    If the SAP delivery version and the active version can be matched, a checkbox is displayed in this column.
    With the most important object types, the active version and the SAP delivery version can be matched.
    Note that the InfoSource TRCS supports the match, but the 3.x InfoSource ISTD does not.
    From a technical point of view, the SAP delivery version (D version) is matched against the M version. As in most cases the M version is identical to the active version (A version) in a customer system, this is referred to as a match between the D and A versions for reasons of simplification.
    When a match is performed, particular properties of the object are compared in the A version and the D version. First it has to be decided whether these properties can be matched automatically or whether this has to be done manually. If you are sure that the object will be used in the same way after you install BI Content, you can perform an automatic match for those properties. When performing matches manually you have to decide whether the characteristics of a property from the active version are to be retained, or whether the characteristics are to be copied from the delivery version.
    Assign points if useful.
    Thanks & Regards,
    Hari

  • How to find master data info objects. Partner function and customer class.

    hi,
    Can you please tell me what are the available extractors for Partner Function (PARVW from VBPA)and Customer Class (KUKLA from KNA1).
    I hope these fields are master data. I checked in 0customer. But I didn't find it. There is a info object (Business partner). Is it the same?
    pls reply

    I will admit that I am not familiar with ECC and there may be different interpretations of what KUKLA means and different means of extracting Customer information to/from ECC.
    However, for us, when extracting Customer Attributes using the 0CUSTOMER_ATTR datasource in R/3, we map KUKLA to 0CUST_CLASS.  They are both set up as 2 CHAR.  That is not to say that you should also.  You can map it to a custom infoobject in BW as long as you set it up as an attribute of 0CUSTOMER.  KUKLA is available in the standard datasource 0CUSTOMER_ATTR in R/3.  When looking at what is available in the infosource for 0CUSTOMER in BW, 0CUST_CLASS is a logical choice to map.
    As far as VBPA-PARVW, VBPA is not a source for master data for 0BPARTNER.  VBPA contains the business partners associated with Sales documents.  So if you are going to create a data provider (cube/ODS) in BW and VBPA-PARVW is part of the transactional datasource in R/3, the you can map it to 0BPARTNER in your cube/ODS.
    Hope this helps.

  • How to extract text and image information from postscript file

    I want to write a programe,and extract text and image information from postscript file using Java.Is it possible? How to extract ?
    Thank!

    First of all, PostScript is not a "text" file. It can and often does contain binary data. Since PostScript streams often contain nested procedures, unless you process the procedure definitions and can "execute" them, you cannot simply "scan" a file to get what you want. No, I can't talk about this in detail since it is quite complex. But Adobe does have the
    PostScript Language Reference Manual on-line for download at
    . Look that over and you will have a fairly healthy respect as to the task involved.
    - Dov

  • How to extract text in HTML Parser

    Hi ,
    Say I have a HMTL file . Now I want to extract text content which is within no tags .

    GetHTMLText is a simple class that should help:
    import java.io.*;
    import java.net.*;
    import javax.swing.text.*;
    import javax.swing.text.html.*;
    class GetHTMLText
         public static void main(String[] args)
              throws Exception
              EditorKit kit = new HTMLEditorKit();
              Document doc = kit.createDefaultDocument();
              // The Document class does not yet handle charset's properly.
              doc.putProperty("IgnoreCharsetDirective", Boolean.TRUE);
              // Create a reader on the HTML content.
              Reader rd = getReader(args[0]);
              // Parse the HTML.
              kit.read(rd, doc, 0);
              //  The HTML text is now stored in the document
              System.out.println( doc.getText(0, doc.getLength()) );
         // Returns a reader on the HTML data. If 'uri' begins
         // with "http:", it's treated as a URL; otherwise,
         // it's assumed to be a local filename.
         static Reader getReader(String uri)
              throws IOException
              // Retrieve from Internet.
              if (uri.startsWith("http:"))
                   URLConnection conn = new URL(uri).openConnection();
                   return new InputStreamReader(conn.getInputStream());
              // Retrieve from file.
              else
                   return new FileReader(uri);
    }

  • How to extract the Title info from multiple PDFs

    Is there a utility or some program that will extract the Title info (located in the Title field under the Description tab from Document Properties)? I have hundreds of PDFs that I would like to be able to have extracted into some txt file or excel file. Any ideas? Thanks!

    I was working on something similar but haven't had time to fully develop it.
    My idea was to use an envelope detector (low pass filter) and then use an energy detection VI on the envelope.
    Here's where I left off
    Anthony F.
    Product Marketing Engineer
    National Instruments
    Attachments:
    test.vi ‏331 KB

  • Guide: how to extract text from any iOS notes app backup on your Mac

    Scenario: you had a sweet notes app like DailyNotes, perhaps one that your girlfriend installed while you weren't looking. So it was on her iTunes account, lets say. Then one day you upgrade to a new iOS version and backup all your data. For whatever reason you erase your iPad, install the new version, and recover back all the apps from the backup. (Maybe you were beta testin g prior to that so you wanted to wipe it clean.) Still your data is gone! Or is it?
    "Fortunately" you backed up. However all that this means is that the text you entered into DailyNotes is stored somewhere in your backup, inside of a file named something like
    "8f5d7ff4111c9b9e4c8dbb7395efdce9c260e0de-20110814-232318", encoded in a .sqlite database file wrapped inside that data.
    Now, if you reinstall the DailyNotes app (or whatever) off of the app store under your own user account, will you get your data back as well? I honestly don't know. But I tried to find out, and I could get no straight answers. Most people said I'd lose my data, and the only way to get back my data would be to restore from the old backup, which of course would erase my current data! So I'd have to backup, then restore from the older backup, then restore from the newer backup again. Does anyone realize how LONG these backups and restores take? FOREVER! I don't have that much time guys. I just need a fast way to access a simple text file. Why does iOS make this such a chore? It's my own content, my own data, which is mine, my copyright, my intellectual property, and the iOS is hiding it from me inside an anonymously-named text file.
    SO HERE'S WHAT YOU DO:
    Download mono framework here and install it: (free)
    http://www.go-mono.com/mono-downloads/download.html
    (this can be easily uninstalled later, it has an uninstaller app)
    Download iPhone Backup Extractor here and extract it in your Downloads directory: (free)
    http://www.iphonebackupextractor.com./free-download/
    (this can be easily uninstalled later, just delete the folder)
    Download SQLite Database Browser 2.0 b1, and extract it in your Downloads directory: (free)
    http://sourceforge.net/projects/sqlitebrowser/
    (this can easily be uninstalled later, just delete the app)
    You can move the two apps to your Applications directory if you intend to keep them long-term, but you can run them just fine from the Downloads directory which will make them easier to identify and erase after you're done, if you don't plan to keep them around.
    Go to Finder and open the iPhone Backup Extractor directory. Resize that window to the side of your screen.
    Go to Terminal and set the window where you can see part of it if the previously mentioned Finder window from the last step was floating on top of it.
    Type "cd " (yes that's c, d, space) in Terminal then hit command-Tab to switch to Finder.
    Drag the folder icon from the title bar of the finder window into the Terminal window that's now in the background. For you newbies, the "title bar" is the VERY topmost edge of the window (the frame of the window) which should have a folder next to the words, "iPhone Backup Extractor" visible in it. You're clicking and dragging THAT folder icon into the terminal window in the background. HIT ALT-TAB AGAIN WHEN DONE.
    Now you're back in the Terminal and it should say:
    "cd /Users/yourname/Downloads/iphonebackupextractor-latest" after the unix prompt. HIT ENTER.
    Now type:
    mono iPhoneBackupExtractor.exe
    This will run the iPhone Backup Extractor app. It takes a few minutes to load because mono is slow (it's emulating Windows basically). Be patient.
    NOTE: The Backup Extractor can only see backups stored on your boot drive that are in the users folder of whatever user you're currently logged in as. So if your backup is on an external drive or a CD, etc., just copy it to the desktop.
    Once iPhone Backup Extractor loads, you'll see its window where you can select the backup. Select whichever one you want to work with. Then hit Expert mode. Each app that was on your device at the time you made the backup will have a directory shown. It will be named something like:
    com.ramki.dailynotes
    Expand the one you want to recover data from by clicking the plus sign next to it. Then expand the Documents directory for it. You'll see a file called something like Daily_Notes.sqlite. Click the dark black box next to this and a checkmark should appear.
    Once you've checked the file to recover, click "Extract selected" below and save to your Desktop (or wherever!).
    Now quit iPhone Backup Extractor unless you have other data to also extract.
    NEXT... OPEN the app SQLite Database Browser 2.0 b1.
    Once it loads, open your Daily_Notes.sqlite file (or whatever .sqlite file you extracted, not necessarily Daily_Notes, that's just my example). If you followed my previous steps that file will be on your Desktop.
    Once it loads you'll see three buttons at the center of the window near the top called, "Database Structure," "Browse Data," and "Execute SQL." CLICK ON "Browse Data."
    Now on the left-hand side of the window there is a pop-up menu with the word "Table: [POP-UP-MENU-IS-HERE] "... CLICK on the pop-up menu. It will actually say the name of one of the database files that's within the SQLite database, something like "ZAPPSTATE" or "ZDAYDATA" or whatever (not "POP-UP-MENU-IS-HERE", that was just text I put as a placeholder since it could be anything really).
    Now that you've clicked the pop-up menu, select each item one by one and look at the data that appears in the table.
    (Don't worry, you're just working with a COPY of the file, so if you accidentally delete anything it's not a real problem, just delete the .sqlite file and start the steps over from the beginning of this message.)
    You should eventually find a table that has the text that you're looking for! Mine was called "ZDAYCONTENT".
    WHEN YOU ARE LOOKING AT THE DATABASE TABLE, it looks like an Excel spreadsheet. That means you may have to double-click on the database cell to get it to show you the entire contents of that part. (It only shows a truncated text string in each cell, but if you double-click, a new window will open on top of the current window, showing the full text that was in there.) Now you can copy the text out and paste it into another app like Text Edit or MS Word or Pages, etc. You can also export the data in the File Menu > Export to an SQL or CSV file. (CSV is a text file where the data is all there, just separated by commas. This can then be imported into Excel or Numbers or another database or printed, etc., or just opened into Pages or Word or BBEdit etc.)
    CAVEATS: Dates will often be shown as a weird number like 3780 or 2863 etc. You may have to figure out on your own what this date means. I honestly have no clue. SQLite Database Browser does not seem to support viewing or exporting PNG and image files.
    Other than that good luck. Post any questions here.
    AND HEY, APPLE: MAKE THIS EASIER! FILES BELONG IN FOLDERS, NOT INSIDE FOLDERS THAT ARE INSIDE APPS!!!

    Restore iPad data from backup files, with the help of iPad Data Extractor:
    1. Settings>General>Reset>Erase all content and settings
    2. You'll be asked twice to confirm
    3. You'll see Apple logo and progress bar
    4. You'll see a big iPad logo on screen
    5. Configuration start
    6. Set language
    7. Set country
    8. Select Network and input Password>Join
    9. Enable Location Service>Next
    10. You'll be given 3 options (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
    11. Select Restore from iTune Backup
    12. You will see picture of USB cable pointing towards iPad
    13. Connect iPad to iTune (make sure iTune is on standby)
    14. Tap Continue (computer)
    15. Restore iPad from Backup (computer)
    16. See progress bar with estimated time (computer)
    17. See Restore in Progress on iPad
    18. See Apple logo
    19. See Apple and Progress Bar
    20. Slide to Unlock
    21. Copying Apps back to iPad (computer)
    22. You'll see Loading/Installing/Waiting below the Apps (iPad)
    23. Sync Music/Podcast/Movies to iPad (computer)
    24. Sync completed (computer)

  • How to extract System/Client Info from R/3

    Hi All,
    Can somebody tell me how do we get the system/client information along with our transaction data coming from two R/3 systems during extraction? If it is possible or not?
    If yes in which R/3 table we can find that information?
    Regards,
    Pooja

    Hi Pooja,
    The Source System is very specific for each info package . So when you create a infoPackage you are aware about the source System. So add 0SOURSYSTEM in the infoSource and make it a constant value(hard code it).
    Hope you got it
    Regards
    Happy Tony
    <b>Points == Thanks</b>

Maybe you are looking for