How to locate only inactive info objects

How to locate only inactive info objects..The table RSDIOBJ contains all the versions (M,A,D). If the objects presents in both the version( A, M) , i need not to retrieve...I need to retrieve only the objects in M but not in A. how to fetch?

Hi
First fetch all the objects from the table RSDIOBJ into ITAB where OBJVERS = 'M'.
then fetch the all objects with OBJVERS = 'A' into ITAB1.
loop at ITAB.
read ITAB1 with key .. = itab-f1.
if sy-subrc = 0.
delete itab index sy-tabix.
endif
endloop.
Now ITAb will have only the Objects with Version M but not with A.
Reward points if useful
Regards
Anji

Similar Messages

How to extract text of info object

how to extract text of info object ?
Example text of project defination from 0PROJECT

Hi Siri,
I think you can't display the text element if you display the data in the dso.
In the dso, you will see only the key part.
So you don't have to load the infoobject text into the DSO, you just have to load the infoobject.
In Bex you have the option to see either key,text or both.
Refet the below thread for details.
Link: [Loading Master Data Text to DSO.;
Hope it helps you in clearing your doubt.
Regards,
Nikhil Joy

How to load data from info object to ODS

Hello BW Gurus,
Is their any way to load data from info object to ODS and I am unable to fine the Info source for that particulate info object master data.
For ex: we have 0PROFITCENTER as info object which is getting loaded everyday. We want same data in ODS too but I don't find any info source related to this info object to create update ruled.
Please advise me how to proceed with this,
Thanks,
Swathi.

hi Swathi,
as mentioned, if you just need the master data text or attribute update, then it's sufficient to load 0PROFITCENTER master data. (don't forget to 'apply hierarchy/attribute change' - rsa1->tools)
if you are going to update attribute in ods with attribute from 0PROFITCENTER, you can choose look up master data attribute method in update rules.
if the requirement is really need 0PROFITCENTER to assign to update rules, then first you have to 'generate export datasource' for infoobject 0PROFITCENTER, right click the infoobject and 'generate export datasource', then do 'replicate datasource' from bw myself, after that it will available. to display it you may go to rsa1->infosource, and menu settings->display generated objects.
hope this helps.

How to load Data in Info Object

Hi, i have a info-object Called "TYPE"
the value for this is always going to be "S1".
I dont want to add it manually as i want this data to get filled up automatically when transported.
the other objects i either get it from R/3 data source or Flat file.
Should i use a flat file to load this single data ???
Thanks,
GG

Hello GG NN,
How r u ?
You could do this in the Transfer Rules, Click the EDIT TRANSFER RULES(Triangle with Grid) icon opposite to the InfoObject. It will show some options like InfoObject, Constant, Routine and Formula.
Select Constant and enter the "S1" value and CONTINUE.
SAVE & ACTIVATE the InfoSource.
***No, the source may be anything, the value "S1" will be transferred for this InfoObject by the Transfer Rules.
Best Regards....
Sankar Kumar
+91 98403 47141

How to install business content Info Objects..

Hello all.
I am trying to do some BW extraction in our sandbox. Unfortunately I dont know how to install BC infoobjects. I have searched thru this forum but am still not fully sure. I have the source system client connected to BI. I replicated the datasources and see a ton of datasources under the UNASSIGNED NODES tree.
Eg: How do I install the InfoObject 0Material. Can somone tell me steps..I think I can figure out the rest after that.
Thanks in advance.

Hi
The Data Warehousing Workbench for installing BI Content has three navigation windows:
In the left-hand window you determine the view of the objects in the middle area of the screen.
In the middle window, you select the objects that you want to activate.
In the right-hand window, you make the settings for installing the BI Content. The right-hand window also contains an overview of the objects you have selected, and it is here that you start installation of BI Content.
In the Data Warehousing Workbench, you use the Navigation Window On/Off pushbutton in the toolbar to display or hide the left-hand navigation window. The rest of this section assumes that the left-hand navigation window is displayed.
2. Assign Relevant Source Systems
If you want to assign a source system, select the Source System Assignment function. The Choose Source System by Default? dialog box appears.
Select one or more source systems by setting the corresponding indicators in the Default Assignment column.
Only ever select the source systems that you really need, otherwise you may have to wait unnecessarily when objects are collected.
The assignment of the source system is only relevant for source-system dependent objects (such as transfer rules, file DataSources, and InfoPackages). If more than one source system is available, only those objects assigned to the specified source system are collected ready for the transfer. Objects that have not been assigned to the specified source systems are ignored.
For more information about the special features inherent in activating process chains that can reference source-system dependent objects, see the Customer Content documentation, under Process Chains and Process Variants.
If you do not select a source system, all the source systems are assigned automatically. You can change your selection later using the Source System Assignment function.
3. Group Objects To Be Included, Determine Mode of Collection for Objects
Make the settings you require from the following selection lists on the right-hand side of the screen:
Grouping
Choose the objects that you want the system to include. The groupings combine the objects from a particular area. You have the following options:
Only Necessary Objects (default setting)
Data Flow Before
Data Flow Afterwards
Data Flow Before and Afterwards
If you change the default setting (Only Necessary Objects), the new setting becomes the default setting for your user.
The grouping selection has an impact on system performance during BI Content installation. For more information, see View of Objects and Object-Specific Recommendations.
Collection Mode
Select how you want to collect the objects:
Collect Automatically (default setting): The data is collected when the objects are selected.
Start Manual Collection: The data is only collected when you choose Collect Dependent Objects.
Set the collection mode to Start Manual Collection. You can select all the objects without having to wait.
4. Determine View of Objects
In the left-hand navigation window, specify how you want the objects to be displayed. For more information, see View of Objects and Object-Specific Recommendations.
5. Transfer the Objects to Collected Objects
In the central area of the screen, select the objects that you want to install, and drag and drop them into the right-hand Collected Objects area of the screen.
The Find Object function allows you to use strings of characters (for example, 0CUST) or wild card searches (for example, 0CUST_*B) to search for objects.
Input help is available for every type of object: Double-click on the Select Objects icon in the tree structure of the corresponding object type to display the Input Help for Metadata screen. Select the required objects. Choose Transfer Selection.
If you implement BI Service API Releases lower than 7.0 in the source system, you have to install the active version of the BI Content DataSources in the source system and replicate them in the BI system before you can use them for transferring data into BI. For more information, see Installing BI Content DataSources and Metadata Upload for SAP Systems.
In the Collected Objects area of the screen, the system displays the selected objects and all dependent objects. Collected objects are stored by default in the repository cache. This reduces the time it takes to access these objects when you want to use them again.
When you transfer objects into the Collected Objectsarea of the screen, these objects are also added to the tree structure of the corresponding object type in the central area of the screen and stored for your user. This personal object list can be called up each time the program is restarted.
If you want to remove objects from your personal list, select the objects that you want to remove and choose the Remove Object from Display option from the context menu or click on the icon.
Objects that are listed in several tree structures can only be changed in the place where they first appear. All additional instances of these objects are grayed out so you cannot modify them.
6. Check Settings for Collected Objects
Check the following columns in the Collected Objects area of the screen:
Install
The following BI Content objects are highlighted in this column by default:
Objects that are being transferred for the first time. There is not an active version of these objects in the system.
BI Content objects that have been redelivered in a new version. These objects can be identified by the Content time stamp in the corresponding object tables.
When setting this indicator, check whether the checkbox refers to a folder of an individual object: If the checkbox refers to a folder, the indicator is set for all the objects that belong to this folder. If the checkbox refers to an individual object, the indicator is set for a single object and the indicators for the other objects in the folder are not changed. The same applies if you deselect this indicator.
In the context menu, the following options are available for the installation:
a. Install All Below
The object in the selected hierarchy level and all objects in the lower levels of the hierarchy are selected as to Install.
b. Do Not Install All Below
The Install indicators are deselected for the object in the selected hierarchy level and all objects in the lower levels of the hierarchy.
Match (X) or Copy
If the SAP delivery version and the active version can be matched, a checkbox is displayed in this column.
With the most important object types, the active version and the SAP delivery version can be matched.
Note that the InfoSource TRCS supports the match, but the 3.x InfoSource ISTD does not.
From a technical point of view, the SAP delivery version (D version) is matched against the M version. As in most cases the M version is identical to the active version (A version) in a customer system, this is referred to as a match between the D and A versions for reasons of simplification.
When a match is performed, particular properties of the object are compared in the A version and the D version. First it has to be decided whether these properties can be matched automatically or whether this has to be done manually. If you are sure that the object will be used in the same way after you install BI Content, you can perform an automatic match for those properties. When performing matches manually you have to decide whether the characteristics of a property from the active version are to be retained, or whether the characteristics are to be copied from the delivery version.
Assign points if useful.
Thanks & Regards,
Hari

Inactive info Object

I get the following errors when i try to activate an info object ( 0CO_AREA ) which is inactive under my info object tree and within the Business Content.
*+Error deleting document property /BI0/0CO_AREA*+
*Error when deleting document property*
*Error when activating Info Object 0CO_AREA*
*Error when generating master data routines*
**Error when resetting Info Object 0CO_AREA to the active version* "*

Hi
Follow the steps
1. In the infobject menu delete the 0CO_AREA
2.Catch up the infobject 0CO_AREA in Business Content screen and say Install.
3.In AWB-->Modelling, search your infobject 0CO_AREA..and this time it shoul be active..
assign points if it helps..

How to desaturate only a moving object???

I am trying desaturate a fast moving object....basically want the person who is moving fast to be in color but everything else desaturated and then vise versa.
Can anyone give me some pointers, I have Color as well if it is easier. I just cant seem to figure this out. All help would be greatly appreciated!
Thanks,

Actually, it sounds like you're trying to desaturate everything but the fast moving object... which leads one to ask how you might isolate that...
If everything is moving (including the camera), you're kinda SOL... however, you might be able to use a difference matte filter to get what you're looking for.
Put a copy of your clip on V2, over the same clip on V1. Add a difference matte filter to the clip on V2. Put a clip that's one frame off from your clip into the image well. Things that move slowly will not have much difference frame to frame, things that are moving faster will have more. Adjust your settings so only the moving object generates a mask.
Use color correction on the two clips to achieve your effect...
Patrick

How to disable only inactive firewall notification in the action center by GPO

Hi
I need to disable only inactive notifications firewall in the action center PCs through GPO.
I have seen several posts and it seems possible disable by GPO only all notifications in the action center and not only firewall notifications.
I have a DC with Win server 2012 R2.
Have you any ideas?
Regards
Christian

Hi Christian,
Sorry, it seems that we can’t achieve this.
Regarding this topic, the following thread can be referred to for more information.
Disabling Action Center's Firewall Notification through GPO
http://social.technet.microsoft.com/Forums/en-US/e78a30cb-6cf2-4de6-afda-e0c90a3d2e34/disabling-action-centers-firewall-notification-through-gpo?forum=winserverGP
Best regards,
Frank Shen

How to find master data info objects. Partner function and customer class.

hi,
Can you please tell me what are the available extractors for Partner Function (PARVW from VBPA)and Customer Class (KUKLA from KNA1).
I hope these fields are master data. I checked in 0customer. But I didn't find it. There is a info object (Business partner). Is it the same?
pls reply

I will admit that I am not familiar with ECC and there may be different interpretations of what KUKLA means and different means of extracting Customer information to/from ECC.
However, for us, when extracting Customer Attributes using the 0CUSTOMER_ATTR datasource in R/3, we map KUKLA to 0CUST_CLASS. They are both set up as 2 CHAR. That is not to say that you should also. You can map it to a custom infoobject in BW as long as you set it up as an attribute of 0CUSTOMER. KUKLA is available in the standard datasource 0CUSTOMER_ATTR in R/3. When looking at what is available in the infosource for 0CUSTOMER in BW, 0CUST_CLASS is a logical choice to map.
As far as VBPA-PARVW, VBPA is not a source for master data for 0BPARTNER. VBPA contains the business partners associated with Sales documents. So if you are going to create a data provider (cube/ODS) in BW and VBPA-PARVW is part of the transactional datasource in R/3, the you can map it to 0BPARTNER in your cube/ODS.
Hope this helps.

Urgent!! How to publish a session Info Object once and pass it to sevaral forms

Hi , I am using JDev 3.1. I have this problem when i create several forms in Jdev, where the wizard adds a sessionInfo object for each form. It also publishes them on the Infobus every time the form is called.I tried to use 1 marster sessionInfo Object from a marster form publish it there and then pass it to the other forms, but then the rowsets don't work propally. I f any one has any ideas please post as soon as possible.

We do have a FAQ, and the topic is part of the FAQ. Unfortunately, it seems that the FAQ is not yet available on OTN. In the meantime, I'll post some of the content here which may be useful:
<BLOCKQUOTE>quote:<HR>
Q
How do I share database information across multiple Frames?
A
This describes using a SDI with multiple frames that share common database information (for example, a master-detail application
based on Dept-Emp where Dept information is dispayed in one frame, and Emp in another). For help in constructing an MDI
application, please refer to the JDeveloper documentation.
1.Create an empty project
2.Add a class to this project (this class will contain the SessionInfo, RowSetInfo, AttributeInfo)
3.Switch to Design mode for this class, and create the SessionInfo and RowSetInfos for your application by selecting the
appropriate object from the Component Palette, then clicking in the Structure Pane.
4.Set the properties of these objects as normal.
5.Create an Application with an empty Frame
6.In design mode, drop the desired controls into the Frame.
7.You can set all the properties for these controls as usual except for the properties that bind the control to a datasource. To bind
the controls to a datasource, switch to Source mode and add the appropriate code, for example:
textFieldControl1.setDataItemName("infobus:/oracle/sessionInfo1/rowSetInfo1/Deptno");
8.Repeat steps 6 and 7 for the second Frame.
9.Modify the Application to instantiate the class that contains the database information, and optionally to display the second
Frame (you may want to use a button on Frame1 that shows Frame2 instead).
Note that if you wish to access the methods of the database information objects programmatically, you may need to make the objects
public static.
<HR></BLOCKQUOTE>
Also in regards to Ali's comment that executing all these queries when the app starts, you may be interested in the following:
<BLOCKQUOTE>quote:<HR>
Q
How do I delay the execution of one or more queries?
A
By default, all queries being used by RowSetInfos in your application are executed when SessionInfo.PublishSession() is invoked.
There are two methods to potentially improve the performance of your DAC application if your queries return a large number of
rows.
1) As a workaround, you can dynamically alter the Where clause of your queries so that fewer rows (or no rows) are retrieved
initially. For example, include the condition 1=2 in the Where clause. Then, based on some interaction from the user, you can set a
"real" where clause condition. For information on dynamically altering the Where clause, see the appropriate FAQ.
2) A slighter cleaner method is to delay the association and subsequent publishing of the RowSetInfo until AFTER
SessionInfo.publishSession() is invoked. The following illustrates the order in which the key steps would be performed:
1.define the all RowSetInfo objects and their attributes
2.parent any RowSetInfo whose queries should be executed immediately to the SessionInfo object
3.publish the SessionInfo
4.parent any RowSetInfo objects whose queries should be delayed to the SessionInfo object
5.when appropriate, publish the RowSetInfo using RowSetInfo.publishRowSet(true)
<HR></BLOCKQUOTE>
And, finally, the above makes reference to a FAQ for how to dynamically set the where clause:
<BLOCKQUOTE>quote:<HR>
Q
How do I dynamically alter the Where clause of a RowSet?
A
There are two ways to accomplish this task. You can either call the setWhereClauseCondition on the RowSet, or you can use bind
variables. Both of the samples below assume a TextField named textSearch in which the user has entered a search value.
void buttonSearch_actionPerformed(ActionEvent e) {
// Two ways of "refreshing" the RowSet with condition specified by user
// Note that both samples use AttributeInfo.getColumnName() to get the appropriate
// format of the column name which differs depending on whether the VO uses "Expert mode"
// Example using dynamically created condition
rowSetInfo1.setQueryCondition(NamerowSetInfo1.getColumnName() + " LIKE '" + textSearch.getText() + "%'");
// Example using bind variable in condition (Note that the VO and its associated views must use ? style parameters)
rowSetInfo1.setQueryCondition(NamerowSetInfo1.getColumnName() + " LIKE ?");
rowSetInfo1.setQueryConditionParams(new Object[] {textSearch.getText() + "%"});
// Execute the query in either case...
rowSetInfo1.executeQuery();
<HR></BLOCKQUOTE>
I hope this helps!!!
-- Brian
null

How to limit Data Packages/ Info IDoc in InfoPackage to 3 while executing

Hi,
In our system BW 3.5 We have couple of both BC Extractors and Generic extractors. All are working fine, but with one generic extractor I got problem like if I run the InfoPackage of Full Load type. All 34 Data Packages are fludded at a same time( but with other InfoPackages only 3 Info Idocs are running at a time and new Info Idoc is starting only after completing old Info Idoc).
So Please let me know how to control only three Info IDocs at a time than all Info IDocs at a time. because I am scraring on monitoring in SM66 and all dialog Processes are looking same time and executing all Data Packages in same time.
I will assign points.
Thanks,
Kaveri

HI Kaveri,
http://help.sap.com/saphelp_nw2004s/helpdata/en/17/e0603801be792de10000009b38f842/frameset.htm
just go through the above link....
Hope it helps,
Ajay

Datsource /CRMBW/CODEC_TEXT : Need to find Corresponding Info Object

Hi BW Experts,
I just want to identify the corresponding info object for this datasource.
/CRMBW/CODEC_TEXT
Can anyone tell me how to find the corresponding info Objects for this datasource.
Thanks,
shahina

I'm not sure about the /CRM part, but in BI you might want to try 0CODEC.

Error during transport of info object

Dear all,
We are using BI7.0 During transport of the infoobject "0MAINTPOS" the following error is appearing.
Start of the after-import method RS_IOBJ_AFTER_IMPORT for object type(s) IOBJ (Activation Mode)
Characteristic 0CM_CTAR: Unit 0UNIT_DIM no allowed in compounding
Characteristic 0CM_SHAR: Unit 0AREA_UNIT no allowed in compounding
Can anyone tell what has to be done to get this error solved.
Regards,
M.Magesh

MM,
Please refer
Re: inactive info objects in BI Content
Re: Unit no allowed in compounding
Hope it helps.

Install info object from D version to A version

HI,
I am trying to install the infl objects from D version to A version. I have selected Grouping mode(Only necessary obects0 B default, Collection mode (Collect automatically) Didsplay (Hierarchy mode) and dragged the in fo objects from left side to right side into collected obects and selected install mode (Install and transport) , i gave the trsport also and installed, but ater install if i see in RSD1 still it is in D version only, not in active version only.
Do i need to any other steps required to install info object from D version to A version. Please suggest me if i mssing some thing.
Thanks
Best regards
SG

hi
if you want to install only the info objects, follow the steps
click the source system icon on the top
click on objects type under bi content
select collection mode automatically
select only necessary objects, under grouping
expand your info object and select your info object and transfer
check the box , in front of info object
install in in back ground.
by default display is hierarchy.
check the job in sm37, when the status is finished only you can check the info object,
if still it is D version then goto rsd1 , give the info object name and make it active.

How to locate inactive transfer reules and update rules

Hi SAP Gurus,
could some one tell me how to locate all the INACTIVE transfer reules and update rules in our system? i DONT want to so the mass activation of transfer/update rules. I just want to locate all the inactivate transfer/upfate rules.
ur help will be appriciated in terms of points..
manmit

Hi,
Inactive UR can be seen by RSA1->Infoprovider->Settigns(menu bar)->Select Display Options->only display restrictions->All inactive objects...
It will show inactive infoproviders along with inactive update rules.
Similarly inactive infosorce/TR can be seen by RSA1->Infosource->Settigns(menu bar)->Select Display Options->only display restrictions->All inactive objects...
Hope it helps.
Regards,
Aditya

How to locate only inactive info objects

Similar Messages

Maybe you are looking for