How to get audit id in coder template mapping

Hello everybody,
i am new in this Forum and new to the Oracle Warehouse Builder. I am Student and currently working on a approach of error handling by ETL processes.
To my question:
I am using a Code Template Mapping to load data in my target tables. In my target table i want to have a column which contains the Execution_Audit_Id of the current Code Template run. Can anyone tell me how i get this Audit ID in a Code Template Mapping? That would be great!
OWB Version 11.2
Regards,
Jens

Hi,
You would need to create a parameter in your report called userloginid select the paramter data type to match that of the datatype this value is stored as in the table.
then the correct syntax would be select * from table1 where userloginid=:userloginid
Hope this helps,
Domnic

Similar Messages

How to get vendor and company code based on logistic invoice document

how to get vendor and company code based on logistic invoice document in abap/4?

Hello Kumar
When you call BAPI_INCOMINGINVOICE_GETDETAIL using
INVOICENUMBER = <number of invoice>
FISCALYEAR = <fiscal year>
the returned HEADERDATA contains what you are looking for:
HEADERDATA-COMP_CODE
HEADERDATA-DIFF_INF
Regards
Uwe

How to get the line in the template (smartform) with out using under score

Hi,
     How to get the line in the template (smartform) with out using under score,
     and how to print the box (line the check box - small squre box (which is used ot mark the tick by the user in front of the item).
     Please provide the valueble answer as early as possible.
Thanks,
Ravi

Hi Ravi,
Line -
Use a SMATSTYLE for this purpose.in the smartstyle create a paragraph or character with underline atribute.Then call the smartstyle in the text.
Search SDN with Key <b>UNDERSCORE</b>.. will get few more posts on the same.
For Checkbox - refer link
Re: Quick Question on Smartforms
Re: putting tick mark into check box in smartform
Reward points if this Helps.
Manish
Message was edited by:
        Manish Kumar

Can any one tell me how to get rid of error code ox80010108

can any one tell me how to get rid of error code ox80010108 when i put a dvd in my hp touchsmart 520 thanks

Hello @charly6,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you are getting the error 0x80010108 when you insert your CD into your Optical Drive on your HP Touchsmart 520 Desktop PC. The error you are receiving is related to Windows Essentials and I suggest that you download and install the latest version from the Windows Essentials website. I believe that Windows Essentials was aware of this error and have corrected it in their updates.
Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

How to get the restriction pass code for iPhone ?

How to get the restriction pass code for iPhone ?

if you forgot it you have to restore your phone to get past that code

HT1541 how to get my redeem a code or gift certificate enter it here means

how to get my redeem a code or gift certificate enter it here means

Welcome to the user to User Technical Support Forum provided by Apple.
Clearly state your Issue and the Troubleshooting Steps you have tried to Resolve it.
Note: iTunes Gift Cards are only Valid in Country of issue

How to get list of company codes with current period not opened?

Hi,
How to get list of company codes with current period not opened?
Is there any way we can check whether the current period is opened for all company codes.
If not how, can we generate a report which having information of period and company code. Also please tell me, which table will have info on posting periods and company codes.
Thanks
Vineeth Varghese

Hi,
The MM periods details can be viewed In Table MARV . On the selection screen you have the option of entering the company codes , current period, year current period etc. so make the required entries and you get the all details relevant to MM periods. Also it can be downloaded as a report.Thanks

Error while running code template mapping between two oracle tables

Hello All
Iam getting the following error while running code template mapping between two oracle tables. Using OWB 11gR2 and oracle 11gR2 DB.
java.sql.SQLException: ORA-20001: The active workspace is not valid as a target for this mapping
c: at "OWBSYS.WB_RT_MAPAUDIT_UTIL", line 1065
ORA-06512: at "OWBSYS.WB_RT_MAPAUDIT_UTIL", line 1087
ORA-06512: at "SOURCE.FILENET_EX_UNIT_3", line 555
ORA-06512: at line 4
Job 51 error: java.sql.SQLException: ORA-20001: The active workspace is not valid as a target for this mapping
ORA-06512: at "OWBSYS.WB_RT_MAPAUDIT_UTIL", line 1065
ORA-06512: at "OWBSYS.WB_RT_MAPAUDIT_UTIL", line 1087
ORA-06512: at "SOURCE.FILENET_EX_UNIT_3", line 555
ORA-06512: at line 4
Quick help is highly appreciated.

Dera Dallan
its only a target user for the workspace where you are deploying the mapping from.
I have two repositories for two different projects. each repositary has its own workspace.
ex:-
Project 1
Work space bpms_rep_owner
Repositary owner bpms_rep_owner
Repositary user bpms_rep_user
Project 2
Work space dem_rep_owner
Repositary owner dem_rep_owner
Repositary user dem_rep_user
Reg
S.Gyazuddin

How to get the restriction pass code for my iPad

How to get restriction pas score for my ipad

Remove restriction passcode
1. Restore to Factory Default
http://support.apple.com/kb/HT1414
2. You can restore from a backup that was done before you enable the Restriction Code.

How to get End System error code?

I am trying to access IBM MQ queue from my proxy service which is invoking a business service using OSB Service Callout Action.
Suppose the queue that I am trying to access is not available, OSB is always returning "OSB Service Callout action received an error response" error.
But, I want the Error code and message which are returned by IBM MQ.
Pls. help me to get the IBM error code & message.
I am usiing IBM MQ v7 and OSB 11g
Thanks,
Hari

Can you check the Fault Detail and log the $fault and check.
Edited by: Prabu on Oct 15, 2012 2:46 PM

How to get the HTML Source code from the active browser ?

Hi All,
I need to get the HTML Source code from the active browser (IE). I tried with the below code, but I am not able to get the Source code all the time, with respect to the different applications (http or https) and the user authentication has to be changes in few applications (_I dont know or not able to given that in the below code_). More over there is also a dependence of the URL to get the HTML Source code.
Therefore what I feel is getting the HTML Source code from the given or active browser will be consistent than the URL. Since the Source code is available in the browser (IE) . Please help me with a sample code to achieve this . . . !
HTMLDocument doc=(HTMLDocument) kit.createDefaultDocument();
doc.putProperty("IgnoreCharsetDirective", Boolean.TRUE);
URL url = new URL(strURL);
Reader HTMLReader = new InputStreamReader(url.openConnection().getInputStream());
kit.read(HTMLReader, doc, 0);Thanks in advance,
Regards,
Jothi Venkatachalam
Edited by: j0o on May 7, 2009 3:11 AM

The simple answer is: you don't.
Not only is it simply not possible, but the entire concept of "the active browser" doesn't exist.
You were on the right track with your code to retrieve the page directly from the server, but as you noticed that code will only work for regular http connections.
For https and other protocols you will need to use appropriate libraries for each protocol. Something like Apache Commons can help you with that. There are networking libraries in there for a lot of commonly used protocols.

How to get the embed html code for my webpage so I can use it on eBay listings?

Hi, I already created a Muse webpage, but when i export it as html I get a code that is not compatible with eBay because eBay won't allow "cookies" nor "iFrame" on a listing.. is there a way around so I can get a working html code for eBay? I'm new at this, I don't have coding knowledge. I've never use Dreamweaver either, Muse is appealing since is user friendly, so any good explanation would be greatly appreciated. Thank you.

Hi, muse is an application made for create websites without coding skills, not to replace any possible use of HTML. If you would like to adapt your code for other uses, like CMS integration, Newsletters, build mobile apps, and other, you will need some coding skills.

How to get itunes gift card code when just creating account?

where do i get a gift card code from? when just creating a apple id, and i cant redeem

The code is on the back of the iTunes gift card
Do you have an iTunes gift card?

How to get OIDs of indexes for class-map ?

I have policy-map configured on cisco router with some class-maps inside. I need to draw a graph traffic passing through these classes. To make a graphs I use Cacti which use SNMP query to draw the graphs (object name cbQosObjectsIndex).
How to get OIDs of class-map indexes ?
I tried to do this by following query:
#snmpwalk -c community_string -v 2c 192.168.0.252 1.3.6.1.4.1.9.9.166.1.5.1.1.1
but the answer was:
iso.3.6.1.4.1.9.9.166.1.5.1.1.1 = No Such Object available on this agent at this OID
The information i need is contained at the OID 1.3.6.1.4.1.9.9.166.1.15.1.1.7:
# snmpwalk -c community_string -v 2c 192.168.0.252 1.3.6.1.4.1.9.9.166.1.15.1.1.7
iso.3.6.1.4.1.9.9.166.1.15.1.1.7.1251.1277 = Gauge32: 0
iso.3.6.1.4.1.9.9.166.1.15.1.1.7.1251.13363 = Gauge32: 0
iso.3.6.1.4.1.9.9.166.1.15.1.1.7.1251.13383 = Gauge32: 0
iso.3.6.1.4.1.9.9.166.1.15.1.1.7.1251.13435 = Gauge32: 734000
iso.3.6.1.4.1.9.9.166.1.15.1.1.7.1251.13481 = Gauge32: 233000

Because 192.168.0.252 1.3.6.1.4.1.9.9.166.1.5.1.1.1 is marked "non-accessible" according to http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?local=en&translate=Translate&objectInput=cbQosObjectsIndex
You'll need to obtain the indices as explained in this blog post:
http://pierky.wordpress.com/2009/04/09/cisco-class-based-qos-snmp-mib-and-statistics-monitor-for-nms/
Joe wrote a very illustrative post on the subject of snmptables: https://supportforums.cisco.com/message/3051004#3051004
And if your IOS supports it, you would want to configure the following to keep the indices from changing after every reboot or OIR:
"snmp mib persist cbqos"

How to get a Parent Message Id in Mapping?

Hi,
I have a scenario to post the idoc to file to mulitple receivers. I have to get both Message ID and Parent Message ID in mapping. I am able to get Message ID but not Parent Message ID. I tried to get it from Table sxmspmast but it does not contain the entry during runtime.
Any suggestions to get the Parent ID while in Mapping.
Thanks,
Manikandan R

you can create a UDF,say getMSGID, to get current message ID:
String headerField;
java.util.Map map;
// get runtime constant map
AbstractTrace trace=container.getTrace();
map = container.getTransformationParameters();
String key = "MessageId";
// get value of header field by using variable key
headerField = (String) map.get(key);
return headerField;
pass this output to an RFC lookup UDF which calls this FM in XI ABAP stack:
FUNCTION ZGET_PARENT_MSG_ID.
""Local Interface:
*" IMPORTING
*"     VALUE(I_CURRMSGID) TYPE CHAR40
*" EXPORTING
*"     VALUE(E_PARENTMSGID) TYPE CHAR40
DATA: lv_currmsgid type SXMSPMAST-MSGGUID,
      lv_parentmsgid LIKE SXMSPMAST-PARENTMSG,
lv_currmsgid = i_currmsgid.
select single PARENTMSG from SXMSPMAST into lv_parentmsgid where MSGGUID = lv_currmsgid.
e_premsgid = lv_parentmsgid.
ENDFUNCTION.

How to get audit id in coder template mapping

Similar Messages

Maybe you are looking for