How to install and setup macports for mac os mavericks, for open vpn purpose.

Hi Guys! I'm using OS Mavericks now in my macbook pro, I need help and suggestions regarding open vpn application that i can use for my laptop so that i can access my server in my office even im out of town and country. I found vpn network setup in network preference but i dont know how to setup. also others are suggesting macports for mac but still difficult to analyze and setup. I need to troubleshoot in terminal which i'm not familiar with commands. Please help me guys! Please!

You're going to need to figure out the required settings for the VPN server you're working with, whether you use the standard client or some add-on. That information is a prerequisite for a VPN client; for any VPN client.
If the standard VPN client present in OS X doesn't and cannot be gotten to work, then something like IPSecuritas or the OpenVPN client would be a typical fallback choice, but IPSecuritas is far more flexible — which means far more complex. These clients are available as application downloads; no Brew or MacPorts required.
Is this your server you're connecting into? Or is somebody else controlling it?
If it's your server and thus your VPN server, then you'll have the option to get either the VPN server in the gateway firewall box or the VPN server running in the target system configured to allow the OS X VPN client to work.
If the server is controlled by somebody else, ask them for the settings necessary for the VPN client.
As Barney-15E states, using Brew or MacPorts won't help, unless you're installing the VPN client that way — which would be a little unusual — and you're still going to have to figure out the L2TP / IPSec or PPTP or other settings here, irrespective of how the VPN client gets installed.

Similar Messages

Hello guys..does anybody know how to install and use adobe master collection with the new lion? I need to use Flash and illustratore, but apparently those programmes are incompatible with the new operative sistem... I am a new mac users and I'd like t

Hello guys..does anybody know how to install and use adobe master collection with the new lion?
I need to use Flash and illustratore, but apparently those programmes are incompatible with the new operative sistem...
I am a new mac users and I'd like to know if there are other similar programmes I can use with lion!

Lab79 wrote:
Are you on Apple's payroll?
well dude I can only let you know that as I work with those programme I don't have to pay for it is my company that pays the programme I whant to use( that's why I was asking if there where other programmes ..that I could use with lion insted that Illustrator and Flash!)..I know Adobe since 2005 and I can say that Adobs products are very good...I think that if it's an Adobe probleme or fault ..they will solve it very soon...but unfortunally I have the impression that after Jobs passed away Appel decided to change politics..and everything started to go very bad! (see FCP X)..
good luck with apple dude..
Where is the Apple problem? I have CS4 and CS5 running perfectly fine on my Macbook Pro. Installed 5 after Lion upgrade. Worth every cent. Adobe did have some catching up to do with Lion but with the CS5.5 update all runs fine. But not yours. So it is a problem with the Lion OS? You say you have been with Adobe since 2005. So you would be aware of all the other issues that Adobe had catching up with past Oss in Mac and Windows then. They get it right, but it is up to them. It is not up to Apple, nor Microsoft for that matter, to run around and check that every software developer in the world is running their business properly.
And what has politics got to do with anything. Some people just have to blame Software for their poor Hardware maintainence of failure of the same.
<The only think I can really do is to go back on my old windows...give back this orrible lap top and ask for my money back!>
Great suggestion. You should go with that one, but good luck getting a refund.
Bye

How to Install and Configure Workflow For PO in Oracle Apps Version R12

Hi,
Please do let me know how to install and configure Workflow for Purchasing in Oracle Apps R12 Version.
I want to the standard setup of workflow configuration for the PO.
Thanks and Regards
Srini

Hi Suresh
Only the latest version of WLP which is WLP 10.3.2 has facility to integrate with Oracle UCM with Adapaters. So make sure that you do have this latest version of WLP 10.3.2. Older versions like WLP 10.3 do not have this provision.
Also I guess when you install and configure this Oracle UCM Adapater and choose above WLP Home, I guess these modules may be added in already installed WLP folders. I checked on my side for WLP 10.3.2 and I could NOT find the modules you mentioned. So most probably you may be missing some installation/configuration stuff from UCM side.
Thanks
Ravi Jegga

How To Install and Configure External Drivers for the JDBC & JMS Adapters

Hello colleagues,
Please I need a How To Install and Configure External Drivers for the JDBC & JMS Adapters version 7.10.
VERSION 7.10.
BBDD ORACLE - ojdbc14.jar
Regards.

Hi ,
Uisng Java Support Package Manager (JSPM) to deploy com.sap.aii.adapter.lib.sda file,
refer this two links,the procedure available how to deploy using JSPM.
http://help.sap.com/saphelp_nwpi71/helpdata/EN/33/e6fb40f17af66fe10000000a1550b0/content.htm
http://help.sap.com/saphelp_nwpi71/helpdata/EN/1f/c45b4211aac353e10000000a1550b0/frameset.htm
Regards,
Raj

How To Install and Configure External Drivers for JDBC & JMS Adapters"

hello ,
where can i download this Guide "How To Install and Configure External Drivers for JDBC & JMS Adapters"?
thanks
best regards
pietro greco

Hi Eleonore Rosenthal,
Could you please check the below links:
http://help.sap.com/saphelp_nwpi71/helpdata/en/33/e6fb40f17af66fe10000000a1550b0/content.htm
http://help.sap.com/saphelp_sm32/helpdata/en/33/e6fb40f17af66fe10000000a1550b0/frameset.htm
Regards,
S.Manu.

How to install and set up SAP BW 7.0

I have already worked against SAP BW 3.5/3.1 server with SAP DPA for a while. Now I would like install and setup the BW server by myself. How could I get the installation for BW 7.0? Is it part of NetWeaver 2004s? What is the general steps to install BW 7?
Thanks

Hi Zhang,
Yes. It is part of NW2004s. So when you install NW2004s you can select the BI Component. Make sure you select both the BI ABAP and Java stack. Also remember to install the BI content after this. The BI 7.0 has a separate frontend so install that too. Make sure all the frontend and backend are on the same patch level.
You can find all the set-ups and patches at http://service.sap.com/swdc.
Bye
Dinesh

How to install and reconfigure a new hard drive?

How to install and reconfigure a new hard drive?
I installed a new hard drive from best buy for my "vintage" MacBook laptop. When I turned on the laptop and the flashing folder appeared, I need help?
I looked online for some clues. I put in the software disk I received when I bought the disk but I cannot select a destination volume to install the software. I tired to partition the drive within disk utility but there was an input/output error. Should I just plug in my external hard drive and hope everything reboots like magic ?
Thank you for any help you can give

How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your new hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

Full backup ( ~ 1 TB ) using external HD - speed USB vs. Firewire vs. eSATA - what are relative speeds - how to install eSATA on mid-2010 Mac Pro desktop ( dual hex-core processors)_

    Hi All,
     I'm trying to resume regular scheduled Full backup ( ~ 1 TB ) of drives using external HD (to allow off-site redundant backup storage) .
     What are relative speeds of USB vs. Firewire vs. eSATA ?
     I suspect eSATA connection may be considerably faster … how to install eSATA on mid-2010 Mac Pro desktop ( dual hex-core processors)?
      ( The quicker and easier backup protocol is, the more likely one is to use it to backup on a routine repetitive basis.)
Thanks

Jim Bogy wrote:
...I suspect eSATA connection may be considerably faster … how to install eSATA on mid-2010 Mac Pro desktop ( dual hex-core processors)?
      ( The quicker and easier backup protocol is, the more likely one is to use it to backup on a routine repetitive basis.)
Adding a USB 3.0+eSATA PCIe card, which The hatter mentions, is the best solution that I've found. See http://eshop.macsales.com/item/CalDigit/FASTA6GU3/. The card is not cheap, but the USB 3.0 works flawlessly (which can't be assumed; ask me how I know) and the eSATA connection allows booting from the connected drive. Grant Bennet-Alder's point about HD speed is important to consider; in addition, the size of the individual files being backed up and where on the backup disk they're going will affect overall transfer speed. For example, using the USB 3.0 connection on that CalDigit card going to a Toshiba 3TB external, the transfer rate for a big file (say a virtual machine file) from an internal SSD boot drive was about 145 MB/sec while a bunch of little files might drop to 30 MB/sec and both rates decrease as an inner partition on the external is used. All told, a nearly 700 GB backup took under 1.5 hours. Using a HD as the source added almost an extra hour, though a WD external was used for that. Using a WD green drive plugged into this http://eshop.macsales.com/item/NewerTech/FWU3ES2HDK/ with an eSATA connection took about 2.5 hours also, but that was bootable whereas the USB 3.0 connection is not.
Another point to consider is that USB 3.0 is ubiquitous on PC's now so there's lots of price competition for externals; not so much for eSATA externals.

Formication : How to install and use it

Hi,
I need some help. I would like to install and use the Formication CGI but I don't find any documentation usable for someone who never installed any CGI
Does someone use it and can teach me how to install and use it ? Or maybe there is a documentation somewhere ?
Thanks for any help

>I thought it was something well known here.
I'd never heard of it before.
Find here the message from the Mac OS X Server Mailing list where I found it.
Hi all..
We are currently moving: from WebStar / Lasso 6.x / FMS 5.5 to
Mac OSX Server / Apache / Lasso.850 / FMSA 8.
On our WebStar webserver we used FlexMail to handle e-mails sent from a
html-form, unless we wanted databases/Lasso to get involved.
I understand FlexMail cannot be used on Apache so I have been looking around
and searched the list for any tool to do the same job.
--> What tool to send e-mails directly from web-forms
with a reasonable option to format the e-mail and
generate a response page.
Henning, most of the people that transition from WebSTAR to iTools Apache use Formication.
Formication is a Perl version of Flexmail, so it has all the features of Flexmail, plus more. It was designed by one of the developers of the original Flexmail.
When you convert from WebSTAR to Apache you can keep your script intact.
With iTools, all you need to do is to add the action:
Flexmail /cgi-bin/formication.pl
and the .flx handler,
and the scripts run unchanged.
>I also found that there is an invisible file
inside. It's a .htaccess file
I'd totally missed that, and it's likely to be the
critical link.
yes... I supposed it was something important but.... well hidden...
By default, as shipped by Apple, .htaccess files are
ignored. You need to explicity enable then in
/etc/httpd/httpd.conf
Both 'Action' and 'AddHandler' (the two directives in
the .htaccess file) require FileInfo override for the
directory. Therefore, at the very least you need to
add:
<pre class=command><Directory /path/to/your/form>
AllowOverride FileInfo
Directory></pre>
to your httpd.conf so that apache will read the
.htacess file.
Alternatively, since you have to edit httpd.conf
anyway, you might just want to add those directives
to the <Directory> block, which will save Apache
having to read the file each time the form is used.
Thanks a lot Camelot,

How to install and use icloud in imac windows 7 based

How to install and use icloud in imac windows 7 based

Have you carefully read iCloud - Learn how to set up iCloud & iCloud on a Mac?, What do I need? If you are trying to run on Windows 7 on your iMac and ignoring OS X well you're pretty much on your own. You would need to look for supports on Windows forums. If you happen to use BootCamp there is a Bootcamp forum that you can post on for BootCamp and Windows assistance.

How to install and use the Khmer unicode Khmer MEF1 and Khmer MEF2?

How to install and use the Khmer unicode Khmer MEF1 and Khmer MEF2?
from www.mef.gov.kh in the bottom of the page, you can get the unicode for the ms office

I think that stuff is for windows, a waste of time trying to use it on a Mac.
There is no need to download anything for Khmer on a Mac. Apple provides Khmer fonts and keuyboards with OS X.
OS X Mountain Lion: Type in another language
MS Word for Mac does not support Khmer. Use TextEdit, Pages, Nisus Writer, LibreOffice instead

How to install "numbers" downloaded on my mac to my iPad?

Hi,
how to install "numbers" downloaded on my mac to my iPad?
Thank you

Your Mac and the iPad use different operating systems. The Numbers version you have on the Mac can only be installed on Macs, so you have to purchase the Numbers version for the iPad, which you will be able to install on an iPhone, iPod touch or iPad. Go to the App Store on the iPad and purchase Numbers

How to install on new (late 2010) Mac Pro

I am going to use Migration Assistant to transfer my data from my old G5 to my new Mac Pro, but would appreciate advice on how to install AW on the new Mac. I have my original Appleworks 6 DVD with the notation in small print: Version 6.2.9 (circa 2003). I then also have a CD that I burned and labeled "Appleworks 6.2.9 Updater". I vaguely remember doing this, but can not recall what it was for. Please advice. Thanks!

OK, got it by installing from the disk and the computer sending me to Rosetta. Much simpler than I expected. Appleworks rocks .

How To Install and run XML/XSU/XDK?

Hello,
I have installed Oracle 8.1.7, have downloaded the utilities
and xdk but how to get all this integrated so I can work with
the sample codes?
I dont see the $ORACLE_HOME/rdbms/admin/dbmsxsu.sql -- this is
the SQL script which builds the XSU's PL/SQL API. xsu12.jar
need to be loaded into the database before dbmsxsu.sql is
executed. This script is automatically ..Nor do I see catxsu.sql.
I assume this creates the xdkdemo/xdkdemo (user/password)? I
also re-run the runInstaller and attempt to see on the list any
XSU related installed or to be installed and not seeing it on the
list. What do I need to download?
A nice step by step how to install and test the install would
be nice.
Thanks in advance for any response.

I entered "install XSU" into the "search" box and got the
following back:
http://www.oracle.com/pls/use/use_query_html_v3.submit_query_inpu
t?p_adv_query_text=install+XSU&p_origin=OTN&p_person_id=100081&p_
community=technet_adv&p_doc_location_array=Place+Holder&p_doc_loc
ation_array=document&p_location_array=&p_keyword_array=100017&p_v
alue_array=technet.oracle.com%2C+Discussion+Groups&p_date_begin=q
date&pdate_end=q_date&p_max_return=200
(GOD I hope that worked!)
In any case, 2 documents came back. I think this one is probably
what you want.
http://download-east.oracle.com/otndoc/oracle9i/901_doc/appdev.90
1/a88894/appgxsu.htm
Mike

How to install windows 8 parallel on mac

How to install windos 8 parallel on mac.

You can install Windows natively using Boot Camp Assistant or you can install Windows in a virtual machine like Parallels, Fusion, or VirtualBox.
Boot Camp instructions are located here: http://www.apple.com/support/bootcamp/
Virtual Machine instructions are located on the respective Parallels, Fusion, and VirtualBox sites.

How to install and setup macports for mac os mavericks, for open vpn purpose.

Similar Messages

Maybe you are looking for