HOW TO KNOW WHAT APPLICATION HAS OPEN A PDF FORM

Hello,
I would like to know how I can verify that application has opened a certain PDF form (for example Reader or Professional). This checking must be done from the same form when the document is opened (using JavaScript for example).
b Thank you for your time.

Have you seen the example that Lori DeFurio has posted on the developer site to do just this? The javascript example in the form works in both Acrobat and LiveCycle Forms. A sample of the results are:
Viewer Version = 7.05
Viewer Type = Exchange-Pro
Major Form Version = 7
Minor Form Version = 7.07
http://partners.adobe.com/public/developer/en/tips/lc_viewer_version.pdf
Hope this helps.
Angie Okamoto
www.techedsolutions.com

Similar Messages

How to know what applications are currently running !!

how to know what applications are currently running !!

if it is in linux use "ps(Process Status)" command to know what is running currently.... for more see this link
http://www.computerhope.com/unix/ups.htm

So I have a file on my desktop and I cannot open it, move it to a folder, or delete it from my mac. I dont know what it has in it, and that makes me suspicious. What can I do to remove this unremovable file from my computer? Is it a virus?

So I have a file on my desktop and I cannot open it, move it to a folder, or delete it from my mac. I dont know what it has in it, and that makes me suspicious. What can I do to remove this unremovable file from my computer? Is it a virus?

First, I would recommend repairing the hard drive with Disk Utility.
If that doesn't fix the problem, there's a very dangerous command you can execute in the Terminal. This is very hazardous, because a simple typo can result in very drastic consequences. I have seen people erase their entire hard drive by putting a space in the wrong place! So, please follow the directions I'm going to give you very carefully!
Open the Terminal, which is found in the Utilities folder in the Applications folder. In the Terminal, enter the following:
sudo rm -f
Make sure to put a space after the "-f"! Then, drag the troublesome file from the Finder and drop it on the Terminal window. That should insert the path to the file in the command. Then go back to the Terminal and press return. You will be asked for your password, and when you type it, nothing will be shown as a security measure. Press return again after entering your password. The file should be deleted.

How to know what ActiveX references are still open

Okay, so I'm about the millionth person to post about this topic, but I feel like I know what I should be doing, but have hit a wall. I have read through pretty much everything I could find in the forums about references and ActiveX.
I am communicating with Excel via ActiveX, and everything works seemlessly, until I realized that if the user closes the Excel sheet (via an "exit" button on my FP), the "EXCEL.exe" process is still running. I've read enough to know that this probably points to a reference that I have not closed.
Problem is, I have poured over my code, and as far as I can tell, I have closed every reference, in the opposite order it was opened (as I read to do in a post earlier).
Aside from casting references to int's to see what is still considered "active" (as I mentioned earlier, all the ones I can find are closed, so this doesn't help me), is there a way to determine which ActiveX references are still open?
Even a way outside of LV? A Microsoft utility even or ...well anything! This is very annoying, and I know it should be quick and easy, I just have to know what is remaining open.
Or, am I missing something else that might be keeping EXCEL.exe running? (yes, I have an application quit and close the application reference)
Thanks for any help

Hi Will,
As you said it yourself closing the same number of references as you open and using Application Quit should be enough to close down Excel.exe.
Did you run your code in highlight execution to see how the behavior of your program changes when you hit the "Exit" button on your Front Panel?
If you can post the minimum amount of code that reproduces the error, I will be more than happy to take a look at it.
Best regards,
Message Edited by Kalin T on 12-07-2006 03:11 PM
Kalin T.
National Instruments
Attachments:
activex_excel.jpg ‏16 KB

How do I know what Opatch has been installed on OBIEE 11.1.1.6.2?

Hi,
I started working with new client and someone does obiee upgrade to 11.1.1.6.2. now users got some issue and we identified that issue can be resolved if we apply a patch and to apply that patch it is saying please make sure you have installed pre requisite patch with some number. how do I know what Opatch has been installed on OBIEE 11.1.1.6.2?
any command or file available?
Edited by: JV123 on Feb 14, 2013 2:48 PM

Check this
http://www.cool-bi.com/CMDline/DeterminingCurrentPatchLevels.php
If helps mark

How to know what reports are running by looking at SSReproting Services to see what reports are running and also any clue of which application is using the reporting services?

How to know what reports are running by looking at SSReproting Services to see what reports are running and also any clue of which application is using the reporting services?

To see what reports are running, take a look at the execution log views that are available in the database. Which views that are available are dependent on your version of SSRS.
http://technet.microsoft.com/en-us/library/ms159110.aspx
To see which application is using SSRS is a little more difficult. You can turn HTTP logging on, which will give you an idea of where connections are coming from, so you can see IP addresses. You can also look at the execution log view to see
user accounts. So, depending on your environment and use of service accounts, this could be easy, or difficult.
http://technet.microsoft.com/en-us/library/bb630443.aspx
If all else fails you can look for clues in the SSRS logs. Good luck...

How do I know what item has been selected in a select list?

I built a select list where the user selects one item from the list and then searches using the searchfield. I need to know what item has been selected in the select list so that I can do branching and branch the user to a particular page. Can someone tell me how I can accomplish this?
So if I want to search for Tea in the drinks category I would need to click on Drink in the select list and then type "Tea" and select search. After that I get redirected to a table called "Drinks" and there the search results will be displayed. please help!

I tried to mach expressions... I made a simple list(with redirection):
STATIC:Yes;Y,No;N and it displays fine. I then try to do branching where exp1=exp2 Where I tried to have the label "X" for E1 and "Y" for E2 and nothing happened. I tried to use the name of the list Xlist and it failed too. I tried Request=exp1 and didnt work either. I set the source for the list as static. I am not sure what I am doing wrong. When i tried !=exp nothing happened either... perhaps the values I am using are wrong? Pleas help me out.

How can I tell my computer what applications to open upon start up?

How can I tell my computer what applications to open upon start up?

If your Mac is running OS X 10.9 Mavericks.
Choose Apple menu > System Preferences, then click Users & Groups.
Select your user account, then click Login Items.
Do one of the following:
Click Add below the list on the right, select an app, document, folder, or disk, then click Add.If you don’t want an item’s windows to be visible after login, select Hide. (Hide does not apply to servers, which always appear in the Finder after login.)
If you want to remove an automatic startup item,
Select the name of the item you want to from opening automatically, then click Delete below the list on the right.

How do you know what view is available to a form?

A customer requirement that we set the a firstlogin attribute on the on one of the resources the first time a user logs into the IDM end user interface, changes their password, and provides answers for their authentication questions. The way I know that a person has done this, it that they are displayed the "End User Menu"
The problem is the accounts portion of the User view is not accessible from the End User Menu. I put the same code in the End User Form and it works.
Is there a way for me to access resource attributes from this form?
Is this the incorrect approach to solving this problem?
How do you know what view is available to a form?

Thanks, that was my problem originally. When using a fieldref I had to set the base context to variables.user i.e.
baseContext=':variables.user'
And in workflow I had to preface variable names with the name of the object I checked the view out into.
What I really wanted to know how to have multiple views open in a form if possible. I'd like to be able to manipulate user and role objects in the same form when editing users in a specific org.

How i know what my collection in adobe ?..

Hello !
week ago i buy my first mac
and the people give me some collection of adobe about 16 software.
he say it's all the softwares adobe has..
but theres no after effects that i really need.
i search in the adobe site the collection of mine..
i think it's the premium beacuse all the software in the premium i have (just not premier and after effects).
how i know what my collection ? and how to download after effects if it's the premium collection ?
thank, tom.

Hi Helen,
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Software>Applications.
Unless you mean the OS version, then the Apple Icon at top left>About this Mac will tell you.

I downloaded an update for my Safari web browser to "snow leopard". When I click on the .dmg file, a window opens up with a .pkg file but when I click on the .pkg file I get a prompt saying that it doesn't know what program to open it with. with a

I downloaded an update for my Safari web browser to "snow leopard". When I click on the .dmg file, a window opens up with a .pkg file but when I click on the .pkg file I get a prompt saying that it doesn't know what program to open it with.

I suspect if you're trying to open a file in 08 that's been opened in 09 the file has been updated to 09 and will not open in 08.

HT1338 how i know what software is in my mac

how i know what software is in my mac

Hi Helen,
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Software>Applications.
Unless you mean the OS version, then the Apple Icon at top left>About this Mac will tell you.

How to know what were line item dimensions

Dear SDN,
How to know what were made line item dimensions.
Thankyou.

Rahul,
Go to the edit mode of your info cube and then check out your dimensions, there if the line item dimension check box is checked then it means that, that particular dimension is a Line item dimension.
Regards,
Gattu

HT5457 How I know what model is my iPad ?

How I know what model is my iPad

Go to support.apple.com/kb/HT5452
I hope I helped!!!

How to know what are all the Webservices available in P6V7

Hi All,
How to know what are the webservices available for integration in P6V7?
Thanks,
RR

Information on Web Services for P6 are available in the Reference Manual that get installed along with P6 Web Service software. you will find the complete list there.
Sachin

HOW TO KNOW WHAT APPLICATION HAS OPEN A PDF FORM

Similar Messages

Maybe you are looking for