How to pickup files from multiple directories

Hi all,
How to pickup files from multiple directories and send it to two different folders at target
Ex:
files\xi\us\US.txt
files\xi\uk\UK.txt
i need to pick up the above mentioned two files and send it to the following paths
app1\files\us\download\US.txt
app1\files\uk\download\UK.txt
US.txt has to goto US folder and UK.txt has to goto UK folder only
Regards

Hi,
To pick form multiple folders, select Advanced Mode for file selection in file adapter..
there u can specify directory name/file names
Refer
/people/mickael.huchet/blog/2006/09/18/xipi-how-to-exclude-files-in-a-sender-file-adapter
To put those files at multiple folders write a command line arguments for this.. go through this weblog...
/people/michal.krawczyk2/blog/2005/08/17/xi-operation-system-command--error-catching
XI/PI: Command line sample functions
/people/michal.krawczyk2/blog/2007/02/08/xipi-command-line-sample-functions
Hope this will help you....
Regds,
Pinangshuk.

Similar Messages

How to pick files from multiple directories via Sender File Adapter?

Hi guys,
I have a scenario File to IDOC. The Sender File Adapter has to take all files: .xml from Source directory E://Current/.
Actually directories are like
E:/Plant1/Current/
E:/Plant1/History/
E:/Plant2/Current/
E:/Plant2/History/.
Can I have one Sender File Adapter to pick all *.xml files
from
E:/Plant1/Current/ and
E:/Plant2/Current/ and how can I write it in Source Directory of Communication Channel?
Or do I have to have a Sender File Adapter for each Plant?
Any suggestion please?
Kind regards,
Danijela Zivanovic

Hey
You might wanna have a look at "Additional selection for source file" parameter in sender file adapter.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/singleSenderFileCC4MultipleDirectories
XI/PI: how to exclude files in a sender File adapter?
Even though this method works but there are some constraints,please check help.sap.com for constraints.
Thanx
Aamir

FILES FROM MULTIPLE DIRECTORIES

Hi Experts,
                I got a doubt here plz clarify it
    1.How can we pick files from multiple directories ? and all the files will have different names?
                Plz clarify this, good explanations willbe rewarded .
                                                                                Regards,
                                                                                Vinod.

Hi Vinod Reddy,
One way that i know to solve this prob is by using the 'File Name Masking'.
This can be done with the sender channel, where you have to specify the
source directory as <NOTHING>
source file as <NOTHING>
This gives you an advanced selection option, where you need to give the Source Directories along with the File name masks (the source files).
Hope this may solve your problem.
regards
vinod v
reward me if its helpful.

[Urgent] How to read files from different directories?

I am new to Java Programming, I would like to know how to read files from directories other than the current one? (example as follows)
ProjectDirectory
|--MainDirectory
|--MainProgram.java
|--SupplementDirectory
|--SupplementProgram.java
|--Pictures
|--Image.gif
What should I write in the MainProgram.java so that I can use the supplementProgram.java from MainProgram and read the Image.gif file from the MainProgram.java?
Thanks

Run through the I/O tutorial here. It should get you up to speed on this sort of thing...

How to write file into multiple directories by using file adapter?

i need to write my file into multiple directories,i able to do in single directory.But i need to write to muliple directories.Please help me out.Thanks in advance.

If you are passing the values at runtime then you can loop it and and invoke the file adapter in loop by dynamically passing the value in invoke properties for "File Directory and File name" etc.

Picking up files from multiple directories

Hi All
We have scenario where each sore has its one folder with all the files in the folder, now there is about 200 stores so and about 30 interfaces that picks up files from those directories. It's gonna take some time to add al the directories to all 30 interfaces. Is there an easier way to do this?
Regards

>
stephan claassen wrote:
> Hi
>
> Thx for reply
>
> abhishek salvi what do mean by ServerName/*? we only have the IP.
> If I put in /SAPXI/METSAPXI/* it sais: A file or directory in the path name does not exist
>
> Regards
Suppose you have one File Server installed (say SAP).....it has only two sub-folders (say XI and PI)....now you want to pick files from both the sub-folders....so you can try SAP/* ........
Please open your File Server location and any sub-folder within it and check if it is / or \ .....and then use the slash (/ or \) accordingly ......if you have IP and no name then give the IP.....rest logic remains the same....
Regards,
Abhishek.

Multiple source files from multiple directories in sender CC

Dear all,
My requirrement is that ,I need to use multiple directories in sender CC (only one) and send the files to receivers.
Kindly let me know how it can be done.
Thanks,
Srinivasa

Hi,
under advanced tab.............If you set the Enable indicator, you can enter variables for the Target Directory and File Name Scheme. Enter the names of the variables and references in the table.
●      Enter each variable that you reference in the Target Directory and File Name Scheme fields without the surrounding percentage sign under Name of Variables in the table.
The variables can refer to attributes of the message header or elements of the message payload.
○       If the variables are to refer to an attribute of the message header, add the prefix message: to the name of the variable under Reference. You can specify the following attributes of the message header:
sender_party, sender_service, receiver_party, receiver_service, interface_name, interface_namespace,
message_id (message ID with hyphens, for example 9fbe1ff1-9a0d-11d9-8665-cbf10a126331)
message_id_hex (message ID in hexadecimal format, for example 9fbe1ff19a0d11d98665cbf10a126331)
For example, if you want to specify the interface name from the message header in the target directory or in the file name scheme, enter message:interface_name as the reference.
If one of the message attributes contains characters that are not permitted in a file name, for example \, /, :, *, ?, ", <, >, |, then these characters are replaced by an underscore ("_").
○       If the variable refers to an element in XML schema, add the prefix payload: to the information under Reference. The reference then comprises a pseudo path description in the form of a comma-separated list with the schema namea,na,nameb,nb,....
namea,nameb,...corresponds to the element name and na,nb,... corresponds to the occurrence of the element name at the respective level in the document.
The description begins at the root of the document and ends at the respective element.
To reference the element that is in bold in the example, the following expression is used: payload:root,1,e1,1,e2,2
The parser searches for the first occurrence of the root element at the first level. It then searches for the first occurrence of e1 at the second level and for the second occurrence of e2 at the third level. The content of the last element (“Example Value”) is set as the value for a specified variable.
Thanks,
Madhu

File Adapter: picking files from multiple directories

Hi all,
In a sender file communication channel with Transport
Protocol FTP, There are 2 parameters for Picking up the file
called Source Directory and Filename. If I want to pick the
files from 2 or more directories, What needs to be done.
Or is it possible to do so ?
Without making duplicate interfaces what else can be done ?
Regards,
Vijay

Actually it is possible to select files from different folders for sender channel. It is available with SP14.
I just copy following description from help.sap.com
Advanced Selection for Source File
If you want to set an exclusion mask for the File Name specified above, or if you want to specify multiple directories using a file name mask and exclusion mask, set the Advanced Selection for Source File indicator.
¡ Specify an Exclusion Mask for the file name specified above.
Example
You want to process all files that have the extension '.txt', but want to exclude all files that begin with the letter 'a'. To do this, enter .txt for File Name, and a for Exclusion Mask.
¡ You can enter additional specifications for source directories, file names, and exclusion masks in the table. This data is processed in addition to the details specified above.

Batch Script to display last modified file from multiple directories

Hello,
I am trying to find the name of the latest file or the last modified file from a set of given directories.
I approached the problem by breaking it into two parts: a. read all the directories from a .txt file and display the names of those directories and files under those directories. b. Find the latest file present in any given directory and
Upto this point all worked well, but when I am trying to combine both these batch scripts, I am unable to get the desired result.
I am using BATCH SCRIPT only to complete this.
My tried script is as below:
a. TO SEE ALL THE DIRECTORIES SPECIFIED IN "path_123.txt" FILE
for /f "delims=" %%i in ('type "C:\Users\sonkar\Desktop\path_123.txt" ') do (set locall=%%i
echo %locall%
echo %%i
b. TO FIND THE LATEST FILE PRESENT IN THE DIRECTORY
set BUILDDROP="E:\"
for /f "tokens=*" %%a in ('dir /A:-D /B /O:-D %BUILDDROP%') do set NEWEST=%%a&& goto :next
:next
echo %NEWEST%
But when combining both is not working at all.
Any help is appreciated.

Since batch files lack the ability to do date arithmetic you are pushing them well beyond their limits. Either VBScript of PowerShell could handle this type of task. Here is a VBScript solution. You must save the code in a .vbs file, then modify it to suit
your exact needs.
'Find the most recent file in a collection of folders
'11 Sep 2014 FNL
Dim dDate, dDate_, sFile, sFile_
Set oFSO = CreateObject("Scripting.Filesystemobject")
Set oList = ofso.OpenTextFile("C:\Users\sonkar\Desktop\path_123.txt", 1)
aList = Split(olist.ReadAll, vbCrLf)
oList.close
dDate = cdate("01/01/2000")
For Each sFolder In aList
   dDate_ = cdate("01/01/2000")
   ProcessFolder(sFolder)
   If dDate_ > dDate Then
       dDate = dDate_
       sFile = sFile_
   End If
Next
WScript.Echo "Most recent file: """ & sFile & """"
WScript.Echo "File date: " &dDate
Sub ProcessFolder(sFldr)
   If LTrim(sFldr) = "" Then Exit Sub
   WScript.Echo "Processing """ & sFldr & """"
   For Each oFile In oFSO.GetFolder(sFldr).Files
       If oFile.DateLastModified > dDate_ Then
           dDate_ = oFile.DateLastModified
           sFile_ = oFile.Path
       End if
   Next
   For Each oFolder In oFSO.GetFolder(sFldr).SubFolders
       ProcessFolder(oFolder.path)
   Next
End sub

Read files from multiple directories

Hy to all! I have a little problem with reading files from a hierarchy of directories,something like this: directory A contains: 4 filed and directory B, and also B contains 3 files and 2 directories and so on. i want to make a method that reads all the files from directory A (including all files from subdirectory). I know i have to use recursive programming, i need a method that will be use to do this. Can U help me to do this????? Thank you all.

Can U help me to do this?Sure. First, review basic File IO in Java: [http://java.sun.com/docs/books/tutorial/essential/io/file.html]
Second, have a look at the numerous examples available on the Internet: [http://www.google.com/search?q=java+traverse+directory]
Third, let us know if you run into any specific problems.
Good luck!

[SOLVED]Copying multiple files from multiple directories to one folder

Title says it all. I have a discography folder with subfolders of the different years and albums of a band each containing music, some also have more sub folders. What I want to do is copy all of the music (.mp3's) from all the folders and sub folders into just one music folder. I found a find and -exec cp command before but it did absolutely nothing for whatever reason. Perhaps I did it wrong. Can anyone help me?
Thanks
Last edited by SiegeMachine (2009-11-15 06:54:40)

. refers to the directory to search (the current directory), it's not a pattern - here's what you want:
find . -iname '*.mp3' -type f -exec cp {} target_dir/ \;
This is assuming you're in the music directory - if not, you want
find /path/to/music -iname '*.mp3' -type f -exec cp {} target_dir/ \;
Last edited by Pox (2009-11-15 06:53:59)

Retrive files from multiple source directories

Hi,
I need to retrive diffirent formet files from multiple directories and based on file name I need to send it to destination folders. Can anybody suggest me How can I impliment this interface.
Thanks & Regards
VenkatK

Venkat,
I hope since you are taking different format files, you are not doing any mapping. You are moving from one location to another location, because if you different formats then you can do in one mapping your requirement.
If it is correct then as shabharish mentioned you can pick the files using multiple file sender adapters. With this you can pick the files, but to send to different directories enable ASMA in sender file commkunication channel. Then in receiver communication check the extension for each format and then give the directory name so that it routes to the destination you mentioned.
Regards,
---Satish

How to create a pdf file from multiple images ?

Dear All,
I want to create a SINGLE page pdf file from two or more page size images that are combined to make a single page pdf. Again, this question is on pdfs that are made out of several, atleast two color images and a black-and-white mask for one of them.
I have such pdf files from an unknown source (the producer is edited out) whereby there are three tiff images, obtained using the well known pdfimages extractor.
When I want to make a pdf out of tiff or png or other image formats, I right click and tell Adobe Acrobat to make a pdf.
However, I dont know how I can give a command to select say, three tif images and specify which is the mask for which and then join them in a way that I get the pdf from the composite of the two color images and a mask for one of them.
Please help me out.
I am a little familiar with the pdf structure skeleton and when necessary, fixed xref tables in one of my favorite editors. A few years ago, I also wrote a bunch of javascripts to make some annotations and needed some automation and used some itext type libraries. However, I need your help in this problem as I am now rusty and forgot some of what I studied to solve my earlier problems. This is a new problem for me. Gentle hints from you would be very nice to help me in this problem. Please specify if necessary what manual and pages to read. in the pdfspec.
Best Regards
Disabled Veteran [physically handicapped]

Hello Again.
On Fri, May 11, 2012 at 12:20 PM, lrosenth <[email protected]> wrote:
>
> Re: How to create a pdf file from multiple images ?
>
> created by lrosenth in PDF Language and Specifications - View the full
> discussion
> ________________________________
>
> No clue who Irving is…
>
I was hoping to have your first name so its easy for me to address you.
> I have no clue what OS platform, programming language, etc. you use so
> can’t really narrow things down.
I would gladly mention that I am working on windows platform, preferably XP.
I can also work on linux for free products that come with it.
> Also, as this is an Adobe forum, we only
> recommend Adobe products – so there may be other options that even my list
> wouldn’t include.
But adding other products, for the help of an adobe products user,
even if it outside adobe, shall add greater prestige to your company
and give impression of user-centeredness.
> If you read ISO 32000-1:2008 (aka the PDF standard), you will find the
> information about Images and Image Masks well described. I didn’t think I
> needed to repeat any of that information.
Well, just add the few pdf stanzas since you are proficient on it and
I am presently a little rusty as I mentioned. Just asking a little
extra yard, not even to go an extra mile.
> And, if you read that same document, you will see that there is NO SUCH
> THING as a “text only PDF”. All PDF documents are structured binary files.
Well, ascii format or uncompressed format that is human readable. I
know its a binary file, but human readable ascii version of it.
I hope you can give me some stanza and various other approaches
possible so I can select or combine things for myself. I see only a
miniscule number of posts claiming to have written masks in this forum
and then with no details.
Regards
Roger
Message was edited by: dying veteran
because the adobe posting system went crazy and truncated all except the first line ... dunno why

How to include header files from different directories?

Hi,
Sorry for the newb question, but I can't figure this out. I'm trying to compile a simple piece of code (C++) that uses header files in a directory different from the Project directory; header files are in /opt/csw/postgresql/include/pqxx. I've tried a few different things, adding that directory to the include directives under Resource Files, add existing files from a folder, etc etc. Whenever I try to build, dmake bails with status -1. I can't seem to get this working, can someone explain how to use header files from different directories?
Thanks,
SlowToady

Header files are usually specified relative to a base directory. If the base directory is not a system directory -- /usr/include or the compiler installation directory -- add a command-line directive
-I path/to/base/dirfor each such directory.
The path can be absolute, such as
-i /opt/csw/postgresql/includeor relative, such as
-I ../../my/includeIn your source code, specify the header file relative to the base directory, and be sure to use quotes, not angle brackets. Example:
#include "header.h" // right
#include <header.h> // wrongThe angle brackets are used for system headers, like <iostream> or <stdlib.h>.
The rules above are common to all compilers on Unix and Linux, and generally to all C and C++ compilers.
For more details, read about the -I option in the C++ Users Guide. You can find the guide by pointing your browser to the "docs" directory in the compiler installation, or go here:
http://docs.sun.com/app/docs/doc/819-5267
All command-line options are described in Appendix A.

How do I get files from multiple DVDs that are using thesame file names?

How do I get files from multiple DVDs that are using thesame file names? Message says "file already exists in catalog"
Message was edited by: marcr56

marcr56
I am viewing your question from different perspective, that is, the issue that you face when you are ripping VOBs from a second DVD-VIDEO on DVD disc using Premiere Elements,
It is best to give the Premiere Elements version and computer operating system that it is running on. In the absence of that, I will generalize.
Assuming that you are using
Premiere Elements 12
Add Media
"DVD Camera or Computer Drive"
Video Importer
Typically the Video Importer Save In: is C:\Users\Owner\Videos
Each of your DVD discs is going to have the same names for the ripped VOBs (VTS_01_1.VOB and so on depending on the duration of the movie). Consequently, after the ripping of the first DVD's VOBs and their save to Videos, you will end up with that "files already existing..." block for the ripping of the VOBs from the second DVD.
The answer is, for each DVD disc VOB ripping, to plan ahead and create and set for different folders in Videos in the Save In field of the Video Importer.
Please review and then let us know if that works for you. Please do not hesitate to ask if you need clarification on anything that I have written.
Thank you.
ATR.

How to pickup files from multiple directories

Similar Messages

Maybe you are looking for