How to Read Idoc - Segment fields values and status messages

Hi,
I am having one requirement as i want to read the segments along with the field values and also i want to read all the status messages.
first i read the idoc data from EDIDS and segments data from EDID4 and the staus messges from T100. but still i am not getting all the status messages.
is there any other table which contains the information of IDOC segments and field values and also the status messages.
Regards,
Kumar

You need to use
V_MSGNO = EDIDS-STAMNO.
CALL FUNCTION 'MESSAGE_PREPARE'
EXPORTING
    MSG_ID   = EDIDS-STAMID
    MSG_NO   = V_MSGNO
    MSG_VAR1 = EDIDS-STAPA1
    MSG_VAR2 = EDIDS-STAPA2
    MSG_VAR3 = EDIDS-STAPA3
    MSG_VAR4 = EDIDS-STAPA4
IMPORTING
    MSG_TEXT = V_TEXT.
WRITE: / V_TEXT.
a®

Similar Messages

How to map idoc segment field E1IDB02-FIIKONTO with BSEG-ESRNR.

Hi,
I have searched for lot of threads in the forum , and also i tried myself but i am not able to map this fields segment with my logic, so please anyone kindly contribute in mapping idoc segment field with the logic given below:
idoc type :PAYEXT outbound idoc.
message type: PEXR2002
This is my logic: i need to populate the ISR number(BSEG-ESRNR ) in idoc segment field( E1IDB02-FIIKONTO)
DATA : str1 TYPE string,
      len1 TYPE i,
      len2 TYPE i,
      str2 TYPE string,
      str3 TYPE string.
str1 = '01-1234-4'. ---> BSEG-ESRNR "ISR Subscriber Number
REPLACE FIRST OCCURRENCE OF '-' IN str1 WITH '_'.
REPLACE ALL OCCURRENCES OF '-' IN str1 WITH space.
CONDENSE str1.
len1 = STRLEN( str1 ).
IF len1 LT '9'.
len2 = '9' - len1.
CASE len2.
   WHEN '1'.
     REPLACE ALL OCCURRENCES OF '_' IN str1 WITH '00'.
   WHEN '2'.
     REPLACE ALL OCCURRENCES OF '_' IN str1 WITH '000'.
   WHEN '3'.
     REPLACE ALL OCCURRENCES OF '_' IN str1 WITH '0000'.
   WHEN '4'.
     REPLACE ALL OCCURRENCES OF '_' IN str1 WITH '000000'.
   WHEN OTHERS.
ENDCASE.
ELSEIF len1 EQ '9'.
REPLACE ALL OCCURRENCES OF '_' IN str1 WITH '0'.
ELSEIF len1 GT '9'.
REPLACE ALL OCCURRENCES OF '_' IN str1 WITH space.
CONDENSE str1.
ENDIF.
Thanks in Advance.

Resolved.

How to validate the incoming field value and raise an alert message

Dear all,
I have the following structure
If incoming value for the field externalid is empty then i have to raise a alert message to end user "externalid field is empty for the id : id number" and for all incoming values it should work. I used the following udf on field externalid with two arguments
if(externalid.equals(""))
throw new RuntimeException("externalid field empty for the following id : " +id);
else
return externalid;
This is working fine for single record. But for many records(multiple occurences), this logic is not working as if records 2 and 3 fails it is showing exception externalid field is empty for the id : record 2.
how to achieve the tranformation logic ?
Regards
Koti Reddy

Hi Amit,
I have tried the above udf, but still stuck-up.
For the above structure shown in image, i have tested giving the following payload
<?xml version="1.0" encoding="UTF-8"?>
<ns0:upsertRequest xmlns:ns0="http://sap.com/xi/SFIHCM01">
 <sessionId/>
 <upsert>
 <type/>
 <sfobject>
 <id>1</id>
 <businessKeys>1</businessKeys>
 <type>1</type>
 <status>1</status>
 <externalId>1</externalId>
 <username>1</username>
 <firstName>1</firstName>
 <lastName>1</lastName>
 <mi>1</mi>
 <gender>1</gender>
 <email>1</email>
 <managerExternalId>1</managerExternalId>
 <hrExternalId>1</hrExternalId>
 <department/>
 <jobCode/>
 <division/>
 <location/>
 <timeZone>1</timeZone>
 <hireDate/>
 <empId/>
 <title/>
 <businessPhone/>
 <fax/>
 <addressLine1/>
 <addressLine2/>
 <city/>
 <state/>
 <country/>
 <zipCode/>
 <reviewFreq/>
 <lastReviewDate/>
 <matrixManagerExternalIds/>
 <defaultLocale/>
 <customManagerExternalIds/>
 <secondManagerExternalId/>
 <loginMethod/>
 <proxy/>
 </sfobject>
 <sfobject>
 <id>2</id>
 <businessKeys>2</businessKeys>
 <type>2</type>
 <status>2</status>
 <externalId>2</externalId>
 <username>2</username>
 <firstName>2</firstName>
 <lastName>2</lastName>
 <mi>2</mi>
 <gender>2</gender>
 <email>2</email>
 <managerExternalId>2</managerExternalId>
 <hrExternalId/>
 <department/>
 <jobCode/>
 <division/>
 <location/>
 <timeZone/>
 <hireDate/>
 <empId/>
 <title/>
 <businessPhone/>
 <fax/>
 <addressLine1/>
 <addressLine2/>
 <city/>
 <state/>
 <country/>
 <zipCode/>
 <reviewFreq/>
 <lastReviewDate/>
 <matrixManagerExternalIds/>
 <defaultLocale/>
 <customManagerExternalIds/>
 <secondManagerExternalId/>
 <loginMethod/>
 <proxy/>
 </sfobject>
 <processingParam>
 <name/>
 <value/>
 </processingParam>
 </upsert>
</ns0:upsertRequest>
No node is creating for success records, instead it throws exception that "externalid field is missing for the id": id for empty externalid field value in second record.
But my requirement is..... when i process 50 records, records with missing value for field externalid should raise an alert message to end user intimating him to check the externalid field for particular id. If the value for externalid field is present in incoming record/payload, then it should be passed to target system.
How can i implement this logic ?
Regards
Koti Reddy

How to show a field value and a message text in a message box

Hi
I have made a message box that shows the value of a text field when a button is clicked. I would like to add some message text to the message box as well, so that my message box will show something like:
You have entered this data: "textField value"
This script works to show the text field value but I cannot figure out how to combine it with an ordinary message box text message. I have tried various combinations of () and “ “ but no luck.
if
(TextField1.rawValue != null){
xfa.host.messageBox(TextField1.rawValue
, "Message box title");}
Kirstine

you can use below code:xfa.host.messageBox("Word you want to add in start "+TextField1.rawValue
+" Word you want to add in the end","Message Box Title")
Thanks

How to read the input field value into ABAP variable?

Hi All,
i need a read the value of an input field into an ABAP variable,and i am doing this in the following way
lstring = request->get_form_field('myFlag').
here 'myFlag' is the input field name,but this is not returning me any value into lstring.
I have gone through the SDN and tried to do this.
could you please help me out to resolve this issue.
Thanks in Advance,
Praveena

Dear Praveena
In which event are you putting this code. Place it in oninputprocessing event(Page with flow logic Model of coding). Then it will surely work.
Regards
Vijay.M

How to read the number of pending and delivered messages from a Queue

Hi
          Can anyone please tell me that how to peek through a queue to get the total number of messages pending and number of messages delivered from a Queue.
          I just have to peek through the queue and I do not want to process the messages.
          Any code snippet or guidance would be of great help.
          Thanks
          Raj

Use WebLogic's JMX/mbean management APIs directly, or tools that access these APIs such as the weblogic console, the WLST scripting language, or the weblogic.Admin command line. There are JMX examples on dev2dev.bea.com (including a program called JMSStats.java).
          For programming convenience, JMS provides a helper method to get the destination runtime stat mbean:
          weblogic.jms.extensions.JMSHelper#getJMSDestinationRuntimeMBean()
          Tom, BEA

IDOC segment fields prefixing blank space with values

Hi Experts,
I am sending data through custom IDOC from SAP to XML which generates successfully but getting 2 problems in the data.
its having 3 level idoc segments:
SEGMENT1 with 1 field (field_name(20))
SEGMENT2 with 3 fields, (code_g(20), field_name(20), value(20))
SEGMENT3 with 4 fields, (code(20), field_name(20), Language(2) & text(20))
When i check the idoc in WE02,
1. i found that segment2-value field is prefixing some space along with the values.
    Eg: if the output is "0111" whihc is plant, in the output (WE02) it is giving "       0111"
2. Segment3-language is no where in the output and text which should come as "011" is coming like "       EN011" means it is concatinating language field value and displaying it with the text field value with prefixing space.
This is happening in PRD not in QA & DEV. I also checked the transport req and everything, Its same everywhere.
Can anyone please help me on this.
Regards,
Nik

Hi,
This issue happnes when u are moving the data to iDOC segement with offset.
to aviod this improper move instead of using offset statement use below mentioned code.
decalare a structure as
Data SEG1 type SEGMENT1 ,
        SEG2 type SEGMENT2,
       SEG3 type SEGMENT3.
then while moving
SEG2-code_g = 'XXXX'
SEG2-field_name = 'YYYY'
SEG3-value = 'ZZZZ'
here u are moving the segment values to idoc data (SDATA) and then append it.
move seg3 to idoc-sdata.
then append it to idoc.
hope this helps

Replaced value is not getting relected in IDOC segment field

Hi,
Need your help for the below issue.
I am replacing the PO # with Delivery Doc # . But the replaced value is not getting reflected in the IDOC segment field(e1bp2017_gm_item_create-po_number.).
Function Module which I am using is IDOC_INPUT_MBGMCR as a copy.
Here is my code given below:
SELECT
            SINGLE vbeln
              INTO lx_vbeln
              FROM lips
             WHERE vgbel EQ e1bp2017_gm_item_create-po_number.
Move lx_vbeln TO e1bp2017_gm_item_create-po_number.
MOVE-CORRESPONDING e1bp2017_gm_item_create
               TO goodsmvt_item.
Then this is passed as TABLE in "BAPI_GOODSMVT_CREATE".
Please do the needful.

Hi Dheepa,
Check it in debug whether the filed is empty or having po#, when ur code is executed for the replacement. if it is empty, po# is populated after ur code. in this case you need to write the code in suitable place.
Reddy

How can we read the screen field values from the report selection screen wi

Hi expart,
How can we read the screen field values from the report selection screen with out having an ENTER button pressed .
Regards
Razz

use this code...
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_posnr.
**Read the Values of the SCREEN FIELDs
CALL FUNCTION 'DYNP_VALUES_READ'

How do i have subsequent fields label and values move down the page dynamic

how do i have subsequent fields label and values move down the page dynamicly...
the field in question "can grow" and can become quite big...overlaping the content of the fileds below...how can i make the fields below this large field move dyanmically so there is no overlap?

if it is the same field and it is set to can grow you just need to make sure you put space between by inserting a section below

Custom idoc segment fields not populated

Way back in 1999 someone create a custom Idoc type with custom Idoc segments in it. Unfortunately, they forgot to release one of the segments.
Recently a change was request to add new fields to this custom segment. In order to get the fields transported the segment had to be released.
All worked fine in Dev and the new Idoc segments were populated as expected. However when the idoc segment was moved to the test system all visually appears to be fine but when the idoc is created (status 50) the new fields are not popultated.
In 40B the start of the inbound process was IDOC_INBOUND_DATA. Does anyone know what the new starting point is in 4.7??
I beleive the error is actually that SData is not reading all the input values and stopping right where the old fields end in teh custom segment.
Thanks,
Anthony

additionally,
SAP will not allow us to release the basic idoc type because it was released in 40B. It also will not allow us to cancel the release since we are now in 620. So, unless anyone has input for this I think the only solution will be to create a successor IDoc type and change our apps to use the new IDoc type with it's enhancements.

RE: How to change Idoc segment data

Hi folks,
I have a requirement where in I have a Inbound DELIN Idoc in the SAP system. When I am reprocessing the same Idoc through WE19 by changing the delivery schedule and then changing the E1EDP16-WMENG value in runtime while debugging, the same is getting updated in correponding SDSA but when the new Idoc is getting triggered, only previous old Idoc value is getting reflected.
Kindly suggest!!!!
Vishal.

No I dont want to change the value in WE19.... In runtime I am changing the value of schedule Line quantity and the same is getting update in SDSA also but when a new idoc is getting created that value is not getting reflected in that Idoc segment field.
Kindly suggest.

How to set a payload field value only once for multiple instances selected?

The user needs to set a payload field value and then he can approve the task so the task can continue through the process, that's fine when the user selects one instance and sets the value in the task details section and then clicks the approve button, but how do we achieve the same behavior in a multiple way?, I mean the user can select multiple tasks in the workspace (in this case the details task page is not available and instead the following label appear "Multiple tasks selected") then if the user clicks the Actions drop down -> APPROVE he only gets the message "your request was processed successfully", so how can the user modify the payload field value only once for all the selected tasks so when he clicks APPROVE the value is populated in all the instances selected.
Thanks,
Carlos.

In the action which displays the edit page just set the form idx value before displaying the jsp.

How can i transfer a field value in the main report to its sub-report?

How can i transfer a field value in the main report to its sub-report?Please eloberate with example if possible!Thanks... 

You can do a couple of things - one would be to pass the information using the data linking expert. Right click on the subreport, choose 'Change Subreport Links' and select the field(s) you are wanting to pass to the subreport. CRW will build parameters and a record selection formula for you in the subreport, and if that's what you want, then great. But you can also remove the selection formula from the subreport and work with the parameter fields in the subreport however you would like.Alternatively, you can look to passing Shared variables back and forth from the main and subreport. this link talks about the method to do this: http://diamond.businessobjects.com/node/251

Inbound idocs segment fields

Hi,
Iam new to idocs and a functional consultant. I need to know whenever we receive the inbound idocs and if i see the segments of the inbound idoc, do the fields which i see in the segments are the sap fields.????/ for instance if the inbound idoc needs to create a sales order, then the fields of the segments of such an inbound idoc are the normal sap sales order fields ??
do i need to give functional specs to the abapers that whenever the inbound idocs is received the segments fields need to be mapped to sales order fields if such an idoc needs to create a sales order ??
regards
sachin

Hi Sachin,
Most of the IDoc segment fields are simmilar to SAP transaction fields e.g. most of the ORDERS IDoc segment fields will be simmilar to what you can see in VA01/VA02 screen fields.
Some fields may have different names.
In the case of few segments which may repeate in IDoc with different qualifiers (such as partner details, date segments), fields will be same but different qualifier value decides where these field values will be populated in the Order.
If you are using standard function module to create Order, it will take care of mapping IDoc segment fields to VA01/VA02 screen fields. But if it is a Z function module, then you need to specify the mapping.
Hope this information will help you.
Regards,
Mahesh Pakhale

How to Read Idoc - Segment fields values and status messages

Similar Messages

Maybe you are looking for