How to resolve Error -200265 with PXI 4461 adc
I am getting error-200265, when usig DAQmx Vis.Can anybody please help how to resolve the error.I have attached my Vi. Thank you in advance
Attachments:
DAQmx-PXI4461.vi 36 KB
Hi Sparsha,
it looks you would like to use PFI0 digital trigger but your DAQmx Trigger vi is expected Analog input. Try to select Start Digital Edge in the DAQmx Trigger vi.
Regards,
CaravagGIO
Similar Messages
-
how to resolve error 21? my iphone 4 just showing apple logo... when i'm trying to restore it... it is showing error 21 n that's not letting me restore it pls help
From the article that the question was posted from:
Error 1611
This error typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
Try reading the solutions you find in the future and follow them. -
How to resolve Error "Adobe Acrobat (AcroExch.App rc=-2147221005) could not be loaded"
What is your operating system? Reader version?
You get this error when doing what? -
TS3694 How to resolve error code 1015 in restoring apple iphone. Please guide
How to resolve error code 1015 in restoring apple iphone. Please guide.
Unauthorized modification of iOS
http://support.apple.com/kb/HT3743
ERROR 1015...
This Error Code is indicative of the Device being jailbroken / Hacked...
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere. -
Please tell me how to resolve error 1015 when trying to restore an Iphone 3g!!!!
https://discussions.apple.com/message/18540882#18540882
-
TS3694 how to resolve error code 1015 ?
how to resolve error code 1015 ?
Generally means you've jailbroken your phone & will most likely never be able to install a stock firmware on it.
-
HT1414 how to resolve error 1015 while restoring iphone3g to 4.2.1
How to resolve error 1015 while restoring iphone 3g to ios 4.2.1
This error is returned by jailbroken iPhones. Sorry, can't discuss such iPhones as per terms and conditions of this Forum.
-
Hi Expert,
Please tell me how to resolve errors - ORA-01033: ORACLE, or closed, or initialized ,ORA-02063: Previous line from D1558A_IFRSQRY
Thanks and RegardsGoogle is obviously broken for you: so I've posted what you need to put into your browser.
https://www.google.co.uk/search?q=ORA-01033 -
HT201210 how to resolve error 1015
how to resolve error 1015
Unauthorized modification of iOS
http://support.apple.com/kb/HT3743
ERROR 1015...
This Error Code is indicative of the Device being jailbroken / Hacked...
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere. -
HT4623 how to resolve error 3014
how to resolve error 3014?
http://support.apple.com/kb/TS3694#error3014
This error occurs when iTunes is unable to reach gs.apple.com in a timely fashion. Follow the steps below inUnable to contact the iOS software update server gs.apple.com. -
TS1424 how to resolve error 3194
how to resolve error 3194??
Just the usual diagnostic steps. Reboot your computer. Use a USB port directly on the computer, not a hub, disable security software - antivirus and firewall - completely remove iTunes, then download and install a clean copy (current version if 10.2.2), create a new user on your computer and try updating as that user, try a different computer.
-
How to resolve error with code: 0xe7210001 cannot load powrprof, object:cls
Hello there
Doses anybody know how to resolve the error with code: 0xe7210001, message: cannot load powrprof, object:clsd-not-found;
OR: Fingerprintsoftware error OR: THotkey.exe message window multiplicates and computer freezes
Scanned maleware and viruses, also in safe mode, found no infection, reinstalled fingerprint driver but nothing changed.
grateful for help!Hello
> message: cannot load powrprof, object:clsd-not-found;
In my opinion this would mean that there is a problem with Toshiba Power Saver
What Toshiba notebook you have exactly?
Maybe reinstalling Power Saver could help. You can find it on official Toshiba website. -
How to resolve error - 502 web server error ?
Hello,
Kindly consider following scenario:
Custom control is programmatically creating site using following code. Once site get created, it redirecting to its settings.aspx page:
try
SPSecurity.RunWithElevatedPrivileges(delegate()
using (SPSite
site1 = new
SPSite(SPContext.Current.Site.ID))
SPLongOperation.BeginOperation
beginOperation = null;
if (beginOperation ==
null)
beginOperation =
delegate(SPLongOperation
longOperation)
site1.WebApplication.Sites.Add(site1.RootWeb.Url
+ "/manPath/site1,
Site1, "", 1033,TemplateName,
__userLoginName, __userName,__userEmail);
longOperation.End(site1.RootWeb.Url
+ "/manPath/site1/_layouts/settings.aspx");
SPLongOperation.Begin(beginOperation);
Same code works perfect at development machine, while in production it gives 502 web server errors.
Please check below error text:
502 - Web server received an invalid response while acting as a gateway or proxy server.
There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server.
Results in Development machine: site gets created and redirects to its site settings page as expected.
Results in Production machine: During the process it throws 502 web server errors, while site has got created successfully.
I am not sure why it happened, while previously it was working. I have feeling that may be redeployment should resolve the issue, but I want to know root cause of this issue!!
Note : the same settings page is working well, when I open it manually in production environment!
Please let me know the approaches to resolve this issue? Also, let me know if you need any further information on same.
Thank you to look at this issue !
Kind Regards,
Dipti ChhatrapatiHi, I have found the things where is the issue , but still I am looking for the resolution !
To add further on above issue, I have observed as below :
Client machine: Following
error is getting throw when creating new site.
502 - Web server received an invalid response while acting as a gateway or proxy server.
There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content
server, it received an invalid response from the content server.
WFEs
machine : Error is not getting display when creating new site.
And hence , it looks like load balancing/IIS issue, however I am not sure how to resolve the same !!
Please let me know your thoughts !
Thanks and Kind Regards,
Dipti Chhatrapati -
How to resolve error stack DTP ?
I stucked at error stack DTP and there are 20 records in error stack DTP, and i want to push the data into further data targets. how to resolve this issue. pls help me with the steps.
Hi,
first in DTP in excute tab
select the option as update the corrective records and availabe for reporting
not do not load and not avaialble for reporting.
then which ever the correct records are there they will update at first load with normal DTP
which ever the error records are there those records will be moved to error stock( it is part pSA only)--
then click error stock tab( on top menu bar you can find) and do the changse and create the Error DTP
once recors gone to error stock you can find the c reating error DTP option in existed DTP
create the ERROR DTP and load teh data.
Thansk & regards,
sathish -
How i resolved my problems with FP 8.0.24
Hi guys,
(first, sorry for my awful english, i'm french <g>
I'm lurking in this forum for few days now and i see there is
always problems with 8.0.24 for many of you. I'll describe
how i resolved my two problems with FP 8.0.24 on 2 computers
(XP Pro SP2 Full retail and XP Home SP2 OEM) :
First problem (appeared on 2 computers) :
On limited account, no flash.
Solution : easy, just follow :
http://www.macromedia.com/cfusion/knowledgebase/index.cfm?id=624850b5
Second problem (just on XP Pro, certainly because i tried to
uninstall + re-install
the product while trying to resolve the first problem) :
Few days later, i noticed that some Flash don't work on
some website (i.e. : youtube : no video), but works on some
others ???
(and also that install page on macromedia website was looping
endless)
After hours, i noticed that during 8.0.24 re-install, some
errors (mainly
"access denied") occurs (thanks to regmon utility) and i
found the problem :
On the 4 keys (and sub-keys + values), some permissions was
denied to
"everyone" group :
http://cjoint.com/?eqdmhPGYwN
-red circles added-
(it's important to remember, in the following explication,
that "DENY" have
always priority on "ALLOW"...)
And what's the problem with "everyone" ?
Oh, nothing really important <g>...
"Everyone", is just... everyone !
If you set :
1) DENIED write to EVERYONE
and
2) ALLOW write to ADMINISTRATORS
then administrators write permission is... DENIED
Then, how do i corrected this ?
(works for first and second problem)
Simple, for each of the 4 keys in
http://www.macromedia.com/cfusion/knowledgebase/index.cfm?id=624850b5
(don't use [advanced] authorization stuff) :
1) i deleted "everyone" line (to clear rights)
2) i added "everyone"
3) i allowed "read" for "everyone" (don't touch to deny, nor
allow write)
the result (in french) :
http://cjoint.com/?etsyFBJyxd
And now i registered flash8b.ocx (or flash8a.ocx) like this :
regsvr32 %windir%\system32\Macromed\Flash\Flash8b.ocx
reminder : if you reinstall FP, check this rights again.
Cheers
~Jean-Marc~
http://docxp.mvps.org
http://msmvps.com/blogs/docxp/Spoke too soon. It didn't work, it just works for longer
periods before it crashes.
I was able to insert images into a number of pages after
recreating the cache but got to some library files that it crashes
on every time still. But other library files and other site
profiles work fine when inserting images.
Also, the other solution suggested above to disable visual
themes did nothing to resolve my crashes.
Also, I heard from someone else in another thread they
thought it was due to using the cache in the first place. Although
I use the cache on all my site profiles.
After turn off the cache and restarting DW, it still crashes
while inserting graphics. The crash isn't exactly at the same time
every time. Sometimes its immediatly upon clicking the okay button
on the image browse dialog box, sometimes it inserts the image into
the page then terminates, sometimes it terminates a few seconds
after the image is inserted. But it's always related to using the
insert image dialog.
It's back to using XP now.
Maybe you are looking for
-
Hi One & All While we are working on Delegate(provider) for JAXWS client handler in Weblogic10 , we have some technical issues and need some assistance. Problem Description In OUTBound of a provider, how can we stop the provider invoking its endpoint
-
Evening all- I have browsed around the forums and it appears that I will have to remake my music library (and cover art) to get them back on the phone. That's nothing but a little time so I am not too concerned about that. What about my pile of appli
-
How to build Open MQ C client API
Hi, all I want to build libmqcrt.so from source code, in mq/src/buildant/rules.xml, 'target name="buildc"' is commented. I uncommented it and execute "ant buildc", it outputs buildcclient: [exec] /bin/sh: CC: command not found I changed CC to g++ in
-
T420 Windows 7 Pro. Networking.../
Re: New ThinkPad 420 replacing an XP Pro laptop which was ethernetted to my Windows 7 Pro desktop. Via my desktop I could directly access my D\ drive on the old XP laptop. It appeared in the Network folder in Explorer. Now in the desktop I just get
-
If you have multiples VLAN SVIs configured with the same HSRP group, does changing the priority on one SVI to failover to another router cause all the SVIs in that group to switch to the other router or do the individual priority settings keep that f