How to run a 10g report from command line ?

Good Afternoon,
Please advise if there is a way to run a 10g report from command line.
We use 6i right now and our job scheduler runs reports using "D:\ORADEV6I\BIN\RWRUN60.EXE ..." executable in batch mode on a separate server. We plan to migrate to 10g Database, Forms, Reports. Is there a way to keep this functionality and create a "command" to address an report server and run a report?
Thank you,
Dmitri

Steps to take.
(1.) In command prompt type RWSERVER SERVER=repserver1 to star the rep server.
(2.) If you get "Javaw.exe The procedure entry point psoasyn could not be located in the dynamic link library orapls10.dll." error do one of the following
        (a.) Type the full name for the server. D:\OracleDevR2\bin\rwserver SERVER=repserver1
               or, if it does not work
        (b.) Add D:\OracleDevR2\bin to the system env. variable PATH
(3.) Start OC4j
(4.) Now you can access the jobs using URL like:
    http://192.161.11.143:8890/reports/rwservlet/showjobs?server=repserver1
      where 192.161.11.143 is your machine's IP address.

Similar Messages

How to run non-customised report from command prompt to gen trace file?

Hi
how to run non-customised report from command prompt to gen trace file?
EBS R12 RUP6.
RHEL5
rgrds

Hi,
See (Note: 285497.1 - Rwrun.sh Does Not Generate Trace Output Using TRACEOPTS in Command Line) and/or (Note: 737445.1 - R12 Concurrent Requests Run Forever; rwrun Errors REP-50125) for the command you need to use.
Thanks,
Hussein

How to run Discoverer 10g report from unix command line

Hello Experts,
I am aware that discoverer report can run through command line using "dis51usr.exe /connect username/passward@connection_string /opendb "DISCOVERER.<<report name>> /export xls"".
Can we run discoverer 10g report (stored in database) from server location / unix command line? Is there any command?
Please assist. Thank you.

Hi Tamir,
Can you please mention from where we have to execute/run these commands? After setting enviornmental variable, are these commands run from any location or we have to go to particular server location and then execute (ex. from directory BI or else).
Thank you.

From 6i to 10g "How to run a 10g report from OEM scheduler"

We recently converted all of our 6i form and reports to 10g. We had forms and reports running as batch processes.
Now that we are using 10g it is understood that we cannot run the forms as we did in 6i using OEM scheduler, so they were converted to scripts.
Our problem still remains, How do we run 10g reports as batch processes?
Can we use OEM scheduler?
Is there a better product to accomplish this task?
...

Hello,
How do you execute your Reports ?
Do you execute it from the Builder ?
If you execute it from the Builder, do you use Run Web Layout or Run Paper Layout ?
(If you have upgraded a Reports From 6i, there is no web layout , so you have to use the Run paper Layout
The web layout is something new that appeared in Reports 9.0.2)
Regard

How to run executable Java app from command line: No Main( ) method

This is the opposite question from what most users ask. I have the Java source code and a running Java executable version of the program in a windows environment. I don't want to run it in the normal way by double-clicking on it or using the executable. I need to be able to run the same application from the command line. If I can do this, I can then compile and run the code on my Mac, too, which is what I am ultimately trying to accomplish.
Normally, this would be easy. I would look for a Main method, normally public static void main (String[] args ) or some variation. I cannot find a main() anything, anywhere when searching the files. There must be some windows executable that links to the Java classes. It's very clever, no doubt, but that's not helping me.
I am trying to run what I can determine as the Main class, with a standard command line call, but that is not working either.
It is a Java graphics program, so mostly Swing container stuff.
I am not finding a manifest.txt file, telling me where a main method is, nor anything about the Main Class. There is no readme file for the program.
Any insight that would point me in the right direction? What should I be looking for?
Thanks in advance, Bloozman

It's possible there's a clever Windows executable that runs the class. But if it's a plain old Java class then there's a good chance there's a constructor. Look for that; it's possible you may be able to start by writing another Java class that creates an instance of your mystery class.
When you have that done, try running it. It's possible that just creating an instance might be sufficient to run it. Swing programs are sometimes written like that. If not, then start looking for methods with names like "run" or "go" or "start" that your little controller program can call.

How to run a 10g Report from form in client using OC4J

Hi,
Every time we make a report, in order to test it we have to deploy in application server.
In our application we make the report is written as a PDF in the server and shown in the client browser using WEB.SHOW_DOCUMENT.
Is there a way we can do this in the development environment?
Like this: I create a report (i.e. RDF). Now in my development machine I want the form (we use a Oracle Form as a parameter form, not the Reports para form) to have a button, and when I press this button the report has to run, create the PDF in my machine and show it my client browser.
How to do it using OC4J??

Steps to take.
(1.) In command prompt type RWSERVER SERVER=repserver1 to star the rep server.
(2.) If you get "Javaw.exe The procedure entry point psoasyn could not be located in the dynamic link library orapls10.dll." error do one of the following
        (a.) Type the full name for the server. D:\OracleDevR2\bin\rwserver SERVER=repserver1
               or, if it does not work
        (b.) Add D:\OracleDevR2\bin to the system env. variable PATH
(3.) Start OC4j
(4.) Now you can access the jobs using URL like:
    http://192.161.11.143:8890/reports/rwservlet/showjobs?server=repserver1
      where 192.161.11.143 is your machine's IP address.

How to run a 10g report in quiet\batch mode

Good Afternoon,
Please advise if there is a way to run a 10g report from command line.
We use 6i right now and our job scheduler runs reports using "D:\ORADEV6I\BIN\RWRUN60.EXE ..." executable in batch mode on a separate server. We plan to migrate to 10g Database, Forms, Reports. Is there a way to keep this functionality and create a "command" to request the report server to run a report?
Thank you,
Dmitri

So the server (we will call it server1) you have "Redwood Cronacle 6.0.2" installed on has a C: drive and a D: drive. On the D: drive is installed Developer 6i (D:\ORADEV6I). You can install Developer Suite 10g also on the D: drive (D:\ORADEV10G for example). After that, setup Oracle iAS on server2. The good news is you have to change very little code. You can:
Not use the iAS server at all and use the following command (similar to how you are doing it now) in Redwood:
return 'D:\ORADEV10G\BIN\RWRUN.EXE'
||' userid=:USRPWD'
||' module='
||v_path||'\'||p_module
||' batch=yes paramform=no destype=file'
||' desformat=' || v_printer_driver
||' desname=:OUTFILE'
||' cmdfile=:CMDFILE errfile=:LOGFILE';If you want to use the iAS server, you have to consider where the report will physicall exist. You can have it exist on the reports server or you can have it brought back to the client. If you bring it back to the client you will lose the ability to run this asynchronously (or in batch mode). You will have to play with some of these parameters to get it to work perfectly, but this should be a good start. These are examples of have the report results saved locally on server1...not server2:
1. Use rwclient to submit a report request
return 'D:\ORADEV10G\BIN\RWCLIENT.EXE'
||' userid=:USRPWD'
||' module='
||v_path||'\'||p_module
||' paramform=no destype=localfile'
||' desformat=' || v_printer_driver
||' desname=:OUTFILE'
||' cmdfile=:CMDFILE errfile=:LOGFILE'
||' server=server2';2. Use rwservlet to submit a report request
return 'D:\ORADEV10G\BIN\RWSERVLET.EXE'
||' userid=:USRPWD'
||' module='
||v_path||'\'||p_module
||' paramform=no destype=localfile'
||' desformat=' || v_printer_driver
||' desname=:OUTFILE'
||' cmdfile=:CMDFILE errfile=:LOGFILE'
||' server=server2';I would think that Cronacle 6.0.2 can submit a url as a job and wait for the results to be streamed back, so you could look into doing that also, in which case the url you would submit for the job would be something like:
return 'http://server2:7777/reports/rwservlet?'
||' userid=:USRPWD'
||' module='
||v_path||'\'||p_module
||' paramform=no destype=cache'
||' desformat=' || v_printer_driver
||' desname=:OUTFILE'
||' cmdfile=:CMDFILE errfile=:LOGFILE'
||' server=server2';

How to run a 10g report in batch mode.

Good Afternoon,
Please advise if there is a way to run a 10g report from command line.
We use 6i right now and our job scheduler runs reports using "D:\ORADEV6I\BIN\RWRUN60.EXE ..." executable in batch mode on a separate server. We plan to migrate to 10g Database, Forms, Reports. Is there a way to keep this functionality and create a "command" to request the report server to run a report?
Thank you,
Dmitri

For those of you interested in following this refer to the same thread in the Reports Forum:
How to run a 10g report in quiet\batch mode

To run a report from command line, when using jdbc-odbc bridge

Hi,
How to run a report from command line, when using jdbc-odbc bridge?
Usually with tns, we do by "rwrun module=<> userid=<user>/<passwd>@tns".
with odbc, we do by "rwrun module=<> userid=<user>/<passwd>@odbc:DSN"
Please specify, what is command line arguments for jdbc-odbc bridge driver?
Environment : Oracle 9i Report Builder on WinNT
Database : Sybase
Regards,
Ramanan

Hello Ramanan,
Report Builder : connect JDBC Query in Report Builder is to through Connection Dialog in JDBC Query Editor. User can use a Sign on parameter (can use, default : P_JDBCPDS or can create new) to connect to JDBC Data Source. Connection once made will be mentioned and will be reused through out Reports Builder.
JDBC PDS allows user to connect one or more same or different kind of databases.
While running report through runtime or Server, user can pass the sign on parameter(connection string) value, like any other user parameter.
Syntax for connection string : <username>/<password>@databaseURL . The syntax of database part of connection string depend on the type of JDBC Driver used to connect to Data Source while designing the JDBC Query. databaseURL refer to the location of the database and its format depend on the JDBCPDS river selected in design time while creating the JDBC Query.
rwrun eg :
rwrun report=jdbc_odbc.rdf destype=file desname=output.html desformat=html P_JDBCPDS=scott/tiger@database
Server eg :
http://server.com:8888/servlet/RWServlet?server=MyReportServer+report=jdbc_odbc.rdf+destype=cache+desformat=html+P_JDBCPDS=scott/tiger@database
http :
Please see ORACLE_HOME/reports/conf/jdbcpds.conf for more information.
With Regards
Reports Team

How to run the 9I report from the forms menue 9i

how to run the 9I report from the forms menue 9i.
Shehzad Latif

Hi,
1. create a Reports Object node in Forms. If you use teh same object node name then you can write generic code that works in all Forms
2. Get the whitepaper about Forms/reports integrtion
http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
Frank

How to run an XML Report from Oracle Forms 10G

Hello Friends,
I am in need of showing a xml report output through a button press trigger in Oracle Forms10G.
I have designed the report in XML Publisher and the report looks fine.I found few scripts useful in running the Oracle Report from Oracle forms10G like Run_Report_Object.But I am not aware of any script that could run a XML report and show the output directly from a Form.
All I want is to run a XML report from an Oracle Form with a button press trigger and show the output in an html version.
Can this be achieved?
If so, Kindly advise as this is an immediate work.
Regards,
Badrul.

Hi,
If I am not wrong the XML publisher is same as BI publisher ...
There is one document which explains how to integrate using web service
You want to check this
http://www.oracle.com/technology/products/xml-publisher/docs/Forms_BIP_v22.pdf
or you can also try web.show_document ..

How to run Report Builder Report from Command line

Hello,
Can Oracle Report Builder Report (run time report) run from Command line ( SQL prompt or Shell script).
Quick response will be appreciated.
Thanks,
Atif

Hi Atif,
please see Note 74648.1 on Metalink.
Monica

NIMAX generate report from command line

Dear users,
I would like to generate MAX report ("MAX Generate Report.vi") from command line. Does nimax.exe have this capability, or do I have to write a wrapper to vi ?
Regards.
Solved!
Go to Solution.

Dear ramjeev
to solve your problem you can try two aproaches
1. instal new verzion of MAX
you can download the newest verzion of MAX from the link
http://joule.ni.com/nidu/cds/view/p/id/2328/lang/en
This distribution includes the following products:
NI System Configuration 1.2.0
NI Measurement & Automation Explorer 4.8.0
NI Network Browser 1.1.0
2. clean up corrupted max database and start with new one
you have a step by step solution on the link
http://digital.ni.com/public.nsf/allkb/86256F0E001DA9FF86256FFD005B827C?OpenDocument
Hope it will help you.

How to open an online pdf from command-line

Hi,
I'm trying to get my application to open a pdf file from an url like http://xxxx.dk/xxx.aspx?CID=xxx
it work from inside adobe reader so the pdf file is a functionel file, but when i try to open it from command line like: AcroRd32.exe /n /A "pagemode=none" "http://xxxx.dk/xxx.aspx?CID=xxx" i keep getting an error telling me "There was an error opening this document. The filename, directory name, or volume label syntax is incorrect"
does anyone have an idea of what i need to do? i could also make a public test if someone needs to see the issue "live"

it works with the browser, so no problems there.. i just wanted the pdf file to open in adobe reader instead of browser window, as it opens from a windows application.. but perhaps i need to look more into merging a embedded pdf viewer in the application instead..

How to export and import database from command line?

I am trying to export my old database into new server.
However, I want to export and import that database from command line.
Is it possible?
Thanks.
SZ

I used this command
exp username/password@database full=y
my export log file is as follwing:
Connected to: Oracle8i Enterprise Edition Release 8.1.5.0.0 - Production
With the Partitioning and Java options
PL/SQL Release 8.1.5.0.0 - Production
EXP-00037: Export views not compatible with database version
EXP-00000: Export terminated unsuccessfully

How to run a 10g report from command line ?

Similar Messages

Maybe you are looking for