How to save image files into SQL Server?

Hello, All:
Does anyone know how to save image files into SQL Server? Does the file type have to be changed first?? Please help me! Thank you!

You need a BLOB field (usually)... Then you can check this tutorial out:
http://java.sun.com/developer/onlineTraining/Database/JDBC20Intro/exercises/BLOBPut/
There are other exercises on that site, including one on reading the images back.

Similar Messages

How to open sdf files in SQL server 2012?

How to open sdf files in SQL server 2012?
I couldn’t figure out how to open the sdf files in SQL server 2012
Thank you
Best
Jamal

I don't think it's hard if understood the question properly you can try this I do it most of the time and this might be the solution for you, sometimes minor simple click is a life saver:)
1.
Open SQL Server Management Studio, or if it's running select File -> Connect Object Explorer... and click the
connect drop down arrow
2.
In the Connect to Server dialog you will see Database Enghine, Analaysis Servie on so on and you go head change Server type to
SQL Server Compact Edition
3.
From the Database file drop-down as shown below click the drop down arrow and select <
Browse for more...>
4.
And you will see C:\, D:\, G:\
drive and so on and open, your SDF file where it is located
I hope this has been informative for you and good luck
Please remember to click “Mark as Answer” on the post that has answered your question as it is very relevant to other community members dealing with same problem in seeking the right answer

How to load oracle data into SQL SERVER 2000?

how to load oracle data into SQL SERVER 2000.
IS THERE ANY UTILITY AVAILABLE?

Not a concern for an Oracle forum.
Als no need for SHOUTING.
Conventional solutions are
- dump the data to a csv file and load it in Mickeysoft SQL server
- use Oracle Heterogeneous services
- use Mickeysoft DTS
Whatever you prefer.
Sybrand Bakker
Senior Oracle DBA

How to save CSV file in application server while making infospoke

How to save CSV file in application server to be used as destination while making infospoke.
Please give the steps.........

Hi
If you want to load your flatfile from Application server,then you need to trasfer your file from your desktop(Computer) to Application server by using FTP.
Try using ARCHIVFILE_CLIENT_TO_SERVER Function module.
You Just need to give thesource path and the target path
goto SE37 t-code , which is Function module screen, give the function name ARCHIVFILE_CLIENT_TO_SERVER, on click F8 Execute button.
for path variable give the file path where it resides like C:\users\xxx\desktop\test.csv
for target path give the directory path on Application server: /data/bi_data
remember the directory in Server starts with /.
U have to where to place the file.
Otherwise use 3rd party tools to connect to ur appl server like : Core FTP and Absolute FTP in google.
Otherwise...
Goto the T.code AL11. From there, you can find the directories available in the Application Server.
For example, if you wanna save the file in the directory "DIR_HOME", then you can find the path of the directories in the nearby column. With the help of this, you can specify the target path. Specify the target path with directory name followed by the filename with .CSV extension.
Hope this helps
regards
gaurav

Best way to import csv file into sql server

Hello DBAs
always thankful for your help and one question, what is the best way to import a csv file into sql server ?

and there is a
Bulk Insert Task for the Control Flow.
http://www.youtube.com/watch?v=ACuCU6IqO50
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter

Import Oracle DataBase dump file Into Sql Server With out connection oracle using c# code.

Hi All,
I would like to ask how can imports my dump oracle database file data and struct into sql server 2005
with out make connection oracle.
best regards.
Hakim.

Hi Hakim.
Based on your title, what I understood there is a issue regarding transfer oracle db dump to sql database using C# code. Am I right? If so, I am afraid there is no build-in method which meet your requrements in .NET framework. You must provides
OraDump Export API to allow developers integrate corresponding capabilities into their applications. These capabilities are about export data from Oracle dump files into popular databases like Microsoft SQL server. Every developer
having OraDump Export API can write just few lines of code on C# or Visual Basic to implement the appropriate export process.
I am search a third-party link, but it's a paid service.
http://www.convert-in.com/data-migration-service.htm
If you don't have to with code, Please refer to: Migrating Oracle Databases to SQL Server 2000
http://technet.microsoft.com/en-us/library/cc966513.aspx
Best regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Restore MySQL database file into SQL server

Hi experts,
I have a MySQL Server backup file. How can I restore it to SQL Server?
Or what is the way around getting the database into SQL Server?
ebro

Hi experts,
I have a MySQL Server backup file. How can I restore it to SQL Server?
Or what is the way around getting the database into SQL Server?
ebro
You cannot restore MySQL backup file on SQL Server.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

How to attach .mdf file to sql server 2008 EXPRESS

I have .mdf files created using SQL SERVER management studio 2012 in another computer and wish to attach the same to SQL SERVER 2008 EXPRESS in another computer. How should I do so? I tried this method :How
to: Attach a Database File to SQL Server Express but then it shows an error that the database cannot be created due to compatibility issues.
Msg 948: The database xyz cannot be opened because it is version 706. This server supports version 655 and earlier. A downward path is not supported..
Any help??

I have .mdf files created using SQL SERVER management studio 2012 in another computer and wish to attach the same to SQL SERVER 2008 EXPRESS in another computer. How should I do so? I tried this method :How
to: Attach a Database File to SQL Server Express but then it shows an error that the database cannot be created due to compatibility issues.
Msg 948: The database xyz cannot be opened because it is version 706. This server supports version 655 and earlier. A downward path is not supported..
Any help??
You are trying to attach SQL Server 2012 database files to SQL Server 2008 R2 which is not allowed, you either need to upgrade your SQL Server 2008 to 2012 or alternatively you can generate all scripts from SQL Server 2012 and execute it in SQL Server
2008 R2.
You can refer below link to how to generate script.
http://blog.sqlauthority.com/2012/07/18/sql-server-generate-script-for-schema-and-data-sql-in-sixty-seconds-021-video/
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
Praveen Dsa | MCITP - Database Administrator 2008 |
My Blog | My Page

How TO DEPLOY JAR FILES INTO XI Server using SDM

Hi XI Gurus,
   im working on adapter development. we have created jar file in NWDS.
   now going ahead to deploy into XI server through SDM.
   can we deploy jar files directly into xiserver through SDM. or it needs to convert to any other formate like EAR, SDA. then how would i convert to SDA.
i any have clear idea on this... pls throw the ways how to convert........
           JAR File to EAR format
           JAR file to SDA format
           EAR file to SDA format
   can any one explain the procedure step by step how to convert jar file into deployment archive file in order to succesfully into XI server.
          thanks i advance. points will be rewarded.
Regards
Rajesh

Hi Rajesh,
JAR file in itself in not deployable.
So v need to envelop this jar file into an EAR file and then v deploy this EAR file on SDM.
Creating Jar
Inside NWDS --> Windows --> Open perspective --> J2EE Development --> right click on ur proj --> Build EJB Archive
Converting .EAR file to .SDA
Converting .EAR file to .SDA
Regards,
Prateek

How to run Exe file through Sql server agent job

Hello All
i have 2 servers
1.Application Server
2.Database server
Application server has a .exe file so i wanted to run this exe file through SQL server agent job from database server.
What is the process for run this Exe file
Can you plz suggest me step by step process
Kamal

While i'm trying to implement this below method
Step1 : Right Click SQL Server Agent. Select New -> Job. This will open a wizard to schedule a new
job.
Step2 : Select Steps from options given on the left side of wizard. This is the main place to set your
exe\program as a running step. Give some name to this step, Select Operating System (cmdexec) for the Type and give the full path of exe in Text box for Command.
ex:\\10.11.00.98(your application serverIP)\ch.exe
Thanks vanchan-Please
mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers
I got this below error
Message
Executed as user:NJROSJ345\SYSTEM. The process could not be created for step1 of job
(Reason:Access is Denied)The step failed.
But i have sys admin rights on the both the servers
Kamal

IndesingCS2 server scriptable pluign: how to import image file into a frame.?

Hello I am creating a scriptable pluign for indesingcs2 server. Now I am stuck at importing a image file in a image frame on a document. The code which was running fine for indesingcs2 desktop is given below. /////////////////////////////////////////////////////////////////////////////////////// /////////// IDFile sysFile = SDKUtilities::PMStringToSysFile(const_cast<PMString* >(&ImageFileNamewithcompletepath)); InterfacePtr<ICommand> importCmd(CmdUtils::CreateCommand(kImportAndLoadPlaceGunCmdBoss)); if(!importCmd) return kFalse; InterfacePtr<IImportFileCmdData> importFileCmdData(importCmd, IID_IIMPORTFILECMDDATA); if(!importFileCmdData) return kFalse; //db is input.I got it using the techniques mentioned in the indesign-server-plugin-techniques.pdf //page 18.. importFileCmdData->Set(db, sysFile, kMinimalUI); ErrorCode err = CmdUtils::ProcessCommand(importCmd); if(err != kSuccess) return kFalse; InterfacePtr<IPlaceGun> placeGun(db, db->GetRootUID(), UseDefaultIID()); if(!placeGun) return kFalse; UIDRef placedItem(db, placeGun->GetItemUID()); InterfacePtr<ICommand> replaceCmd(CmdUtils::CreateCommand(kReplaceCmdBoss)); if (replaceCmd == nil) return kFalse; InterfacePtr<IReplaceCmdData>iRepData(replaceCmd, IID_IREPLACECMDDATA); if(!iRepData) return kFalse; iRepData->Set(db, imageBox.GetUID(), placedItem.GetUID(), kFalse); ErrorCode status = CmdUtils::ProcessCommand(replaceCmd); if(status==kFailure) return kFalse; return kTrue; /////////////////////////////////////////////////////////////////////////////////////// ////////// I used the same code for making scriptable plugin for indesignCS2 server as it doesn't involve use of any UI element. But this code is not working.It doesn't crash or returns kFalse. What i see after executing the plugin through script is a grey region for image in the graphics frame. I request if anyone gives me solution to this i will be highly grateful to him. Thanks and Regards, Yogesh Joshi

Actually, your code is working fine, as there are no returned errors, asserts or crashes.
The reason you are just seeing a gray box, is that the display performance is set to the lowest level in InDesign Server for performance reasons.
Hint: Open the document in "desktop" InDesign, right click on the image, and look at the Display Performance settings for the image.
See
Ken Sadahiro, "[CS2 Server] Controlling display performance, how?" #1, 23 Feb 2006 8:01 am
You can of course programmatically change it to the normal or high res settings from within your plug-in, but it might slow down the performance of InDesign Server a bit.
One additional comment:
In your code where you do this:
importFileCmdData->Set(db, sysFile, kMinimalUI);
I would do this, just to be safe:
if (LocaleSetting::GetLocale().IsProductFS(kInDesignServerProductFS )) { importFileCmdData->Set(db, sysFile, kSuppressUI); } else { importFileCmdData->Set(db, sysFile, kMinimalUI); }

How to Save the file into R/3 Server Path

Hi Friends,
I have one Query on WDJ. Here I have two requirements.
I have done click on u201CExport Excelu201D Button that data was download into Excel file Now my requirement is click on Save Button that file will save into (/exchange/CED) this path of R/3 System.
CED -
>is R/3 System ID
Under System id we can save this file.
Here EP Server and R/3 Servers in Diff Systems.
I was write codeing
InputStream text =      null;
     int temp = 0;
     try
     File file =      new File(wdContext.currentContextElement().getResource().getResourceName().toString());
//       String File = "abc.xls";
//       String file = "anat" + ".xls";
     wdComponentAPI.getMessageManager().reportSuccess("File::"+file);
     FileOutputStream op =      new FileOutputStream(file);
//       FileOutputStream op = new FileOutputStream("D://usr//sap//BPE//"+file);
//       FileOutputStream op = new FileOutputStream("D://KumarDev-BackUp//"+file);
     wdComponentAPI.getMessageManager().reportSuccess("op::"+op);
     if (wdContext.currentContextElement().getResource()!= null)
     text = wdContext.currentContextElement().getResource().read(false);
     while((temp=text.read())!= -1)
     op.write(temp);
     op.flush();
     op.close();
//        path = file.getAbsolutePath();
     path =      "/exchange/CED/"+file;
     wdComponentAPI.getMessageManager().reportSuccess("path:"+path);
     catch(Exception ex)
          wdComponentAPI.getMessageManager().reportSuccess("ex.printStackTrace()");
My Req is that file will saved in this path (path =      "/exchange/CED/"+file; )
Regards
Vijay Kalluri
Edited by: KalluriVijay on Apr 20, 2010 11:01 AM

Hi Friends,
I have one Query on WDJ. Here I have two requirements.
I have done click on u201CExport Excelu201D Button that data was download into Excel file Now my requirement is click on Save Button that file will save into (/exchange/CED) this path of R/3 System.
CED -
>is R/3 System ID
Under System id we can save this file.
Here EP Server and R/3 Servers in Diff Systems.
I was write codeing
InputStream text =      null;
     int temp = 0;
     try
     File file =      new File(wdContext.currentContextElement().getResource().getResourceName().toString());
//       String File = "abc.xls";
//       String file = "anat" + ".xls";
     wdComponentAPI.getMessageManager().reportSuccess("File::"+file);
     FileOutputStream op =      new FileOutputStream(file);
//       FileOutputStream op = new FileOutputStream("D://usr//sap//BPE//"+file);
//       FileOutputStream op = new FileOutputStream("D://KumarDev-BackUp//"+file);
     wdComponentAPI.getMessageManager().reportSuccess("op::"+op);
     if (wdContext.currentContextElement().getResource()!= null)
     text = wdContext.currentContextElement().getResource().read(false);
     while((temp=text.read())!= -1)
     op.write(temp);
     op.flush();
     op.close();
//        path = file.getAbsolutePath();
     path =      "/exchange/CED/"+file;
     wdComponentAPI.getMessageManager().reportSuccess("path:"+path);
     catch(Exception ex)
          wdComponentAPI.getMessageManager().reportSuccess("ex.printStackTrace()");
My Req is that file will saved in this path (path =      "/exchange/CED/"+file; )
Regards
Vijay Kalluri

Error importing text file into SQL Server when last column is null

Hello all. Happy holidays!
I'm trying to import a text file into a SQL Server table, and I get the error below when it gets to a row (row 264) that has null in the last column. I'm guessing the null jumbles up the delimiters somehow. The nulls are not errors, and I need to import
them into the table with the rest of the rows. Any idea how I can do that?
Thanks!
[Flat File Source [1]] Error: Data conversion failed. The data conversion for column "XYZ" returned status value 2 and status text "The value could not be converted because of a potential loss of data.".
[Flat File Source [1]] Error: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "output column "XYZ" (178)" failed because error code 0xC0209084 occurred, and the error row disposition on "output column "XYZ"
(178)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
[Flat File Source [1]] Error: An error occurred while processing file "ABC.txt" on data row 264.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Flat File Source" (1) returned error code 0xC0202092. The component returned a failure code when the pipeline engine called PrimeOutput().
The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
WeeLass

Hi WeeLass,
The error that” Data conversion failed. The data conversion for column "XYZ" returned status value 2 and status text "The value could not be converted because of a potential loss of data.".” is generally error message, and the error indicates
that there is data type mismatch issue between the input columns and the output columns.
Based on your description, the issue is that you trying to convert a column contains empty value from string to integer data type for the output column "XYZ" in Flat File Source [1]. Please note that we cannot type an empty value as integer data
type column value, so the error occurs.
To fix this issue, just as you did, we should convert the data type for the output column "XYZ" in Flat File Source [1] back to DT_WSTR or DT_STR, then use a derived column task to replace the current column (UBPKE542). But the expression should
be like below:
LEN(TRIM(UBPKE542)) > 0 ? (DT_I8)UBPKE542 : NULL(DT_I8)
In this way, the data type of the column in SQL table would be int, and the empty value would be replaced with NULL.
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How to print pdf file in SQL Server Reporting services report using command prompt?

Is there a way to automatically print a SQL Server Reporting services report on command prompt? For eg: We can save a pdf file using rs.exe utility. I want to print a pdf using rs.exe utility. Is it possible? I don't want to install any 3rd party software.

Thanks Simon for replying to my question.
In oracle form, there is oracle command to print the report from command prompt with the help of rwrun.exe
e.g: rwrun.exe REPORT="D:\Test\REP_25\MLA.REP" DESNAME="testprinter" DESTYPE="PRINTER" P_FORMNAME="MLA.FMX" P_SPRACHE="E" P_SPRACHE_NR2="1" P_WHERE_BEDINGUNG="order by land_nr" USERID="test/test.world" PSV_NAME="PSV_DEMO" PSV_JOB_ID="PS$9583" RECURSIVE_LOAD="NO"
BATCH="YES" NONBLOCKSQL="NO" ARRAYSIZE="1" PARAMFORM="NO" ERRFILE="c:\temp\psv16.tmp"<
and to save the report we just need to change DESNAME="c:\temp\OC_100001349.pdf" DESTYPE="FILE" in above command instead of DESNAME="testprinter" DESTYPE="PRINTER".
DESNAME and DESTYPE are the input parameters of the respective report.
In SSRS, we can run the file from the command prompt and save it.
rs -i "C:\Users\pujarswa\Documents\reports\new\LoadReport.rss" -s ww2004760:80/ReportServer_MSSQL -v fileName="C:\Users\pujarswa\Desktop\TipsReportLoad.pdf"
-v reportPath="/TipsReport/LoadListTabular" -t -v format="PDF" -v LandNr=4 -u ap\swati -p test@# -e Exec2005
But we cannot use same command for printing as you said we need to create another script for printing files.
I have gone through the links but I dont want to use Adobe Acrobat Reader exe for printing because client it may not have Adobe Acrobat Reader on their machine.
Also I want to pass a input parameter as type="Printer" to my report which will print directly for me and same I can acheive in command prompt passing type="Printer" fileName="C:\Users\pujarswa\Desktop\TipsReportLoad.pdf"

How to upload multiple files into a server location at a single time

Hi All,
In my application i need to send multiple files from a particular page into the server location. In this page there will be an option to upload a file and after selecting the file , we will have an option asking if we were interested to send another file. It works just similar to google mail where we can multiple files at the same time. Right now though i had coded the uploading files concept i am facing some problems when trying to upload multiple files. All the files are being appended to a single file but i want them to be placed as different files at the specified location. Plz help me in this regard...
Thanks in advance................,,

Hi,
i am sending the code in my prg. Have a look at it.
var multi_selector = new MultiSelector( document.getElementById( 'files_list' ),3);
In the above line i am specyfying that the maximum no. of files to be uploaded is 3. So if i upload less than 3 files, the program doesn't work and is not reading the uploaded files. If i upload 3 files it works fine. So please suggest me how to make this work irrespective of the no. of files uploaded using apache commons.
My code is as follows:
<form action="./servlet/Sample" method = "post" enctype="multipart/form-data">
 
 <input id="my_file_element" type="file" name="file_1" >
 <input type="submit" name="submit1" value="submit">
</form>
Files:

<div id="files_list"></div>
<script>
 
 var multi_selector = new MultiSelector( document.getElementById( 'files_list' ),3);
 
 multi_selector.addElement( document.getElementById( 'my_file_element' ) );
</script>

How to save image files into SQL Server?

Similar Messages

Maybe you are looking for