How to Selectively Delete ONE Key Figure from Cube....

Hi:
On a Daily basis (Via Process Chain), I need to do the following:
1.  DELETE Single Key Figure from my planning cube.  When the "PYMNT DATE" is greater than System Date, then delete the
     key Figure.
2.  Once Deleted, LOAD the same Single Key Figure from another cube when the PYMNT DATE is GT  System Date. 
How can I do this in a Program.  What would be the code for this?  Need help with ABAP.
Thanks in advance.....  PBSW

Hi,
See Article on Selective Deltaion in
http://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
Using Selective Deletion in Process Chains
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/s-u/using%20selective%20deletion%20in%20process%20chains.pdf
Thanks
Reddy

Similar Messages

  • How to find if one key figure is used in any report

    Dear Experts ,
    I have one key figure info object .I wanted to know how to find this key figure is used in which report .
    As I know "where used list " but this will not help me .
    Any suggestions please share .
    Puru

    Hi Puru,
    Try following approach,
    goto RSZELTTXT table and put your key figure name in the long text and click on execute. Get the list of all the ETULID's and go to table RSZCOMPDIR from this table for all the ETLUID's get all the list of COMPUID's and from COMPUID's you will be able to find all the reports from RSRREPDIR in which that key figure is getting used.
    Regards,
    Durgesh.

  • How to populate " UnRestricted Stock" key figure from 0IC_C03

    Hello All,
    There is requirement for us to show a field known as "unrestricted stock" from the info cube 0IC_C03. but there is no such key figure in that info cube. I searched all the forums and learnt that it must be calculated on fly while the report executes.
    can any body help to identify / populate the "Un Restricted Stock"  from the info cube 0IC_C03.
    Thanks for all your time

    Hello Mr.Nagaraju vadlamani,
    Thanks for your reply.
    Can you please let me know how to get the following objects you mentioned to calculate the "unrestricted stock"
    Projected Stock of today - ?
    Demands with demand date today - ?
    receipts with delivery date today  - ?
    Thanks,

  • Help Required for Mapping Key figures from Cube to APO Planning area.

    Hello Experts,
    We have created cube in APO BW and now we want to map it to Planning area how we can map.
    Can any body explain how we can map keyfigures?
    What is the use of livechache how it will be updated?
    Regards
    Ram

    Hi,
    I am not very sure about the 9ARE aggregate (haven't used it in backups), but RTSCUBE is used to copy time Series (TS) KF data from cube to planning area (SNP or DP).
    Are you trying to restore some time series data from your backup cube to the planning area? If yes, then do a mapping of characteristic from cube to planning area in RTSCUBE, and also map the TS KF between cube and planning area.
    If your KF is not a time series KF, then you can't copy it from cube to planning area. You could get data to cube for some reporting, otherwise I am not sure what use the backup is for you. For SNP, most of the data would be received from R/3, so there's not much point in having a backup.
    Hope this helps.
    Thanks - Pawan

  • Calculated key figures from multicubes before aggregation

    Hi,
    I am calculating a total using a calculated key figure
    that has one key figure from a multicube and two other key figures from another multicube.
    Also I factor the total using a variable with a replacement path on the dummy attribute (Constant) to "force" the calculation at the material level.
    Cost = Cost(CUBE1) / Quantity(CUBE1) * Quantity(Cube2) * ZVRMATER1
    Problem:
    If I split the calculation this works before aggregation at the material level. Also this works fine using calculations that use key figures that must be calculated before aggregation if they all are from the same cube at the time.  The required formula above will not work (zero divide) since during selection the OLAP processor retrieves in phases and with value 0 from the key figure of CUBE2.
    Any suggestion on how to solve this without new back-end development?
    Thanks.

    Hi,
    I am calculating a total using a calculated key figure
    that has one key figure from a multicube and two other key figures from another multicube.
    Also I factor the total using a variable with a replacement path on the dummy attribute (Constant) to "force" the calculation at the material level.
    Cost = Cost(CUBE1) / Quantity(CUBE1) * Quantity(Cube2) * ZVRMATER1
    Problem:
    If I split the calculation this works before aggregation at the material level. Also this works fine using calculations that use key figures that must be calculated before aggregation if they all are from the same cube at the time.  The required formula above will not work (zero divide) since during selection the OLAP processor retrieves in phases and with value 0 from the key figure of CUBE2.
    Any suggestion on how to solve this without new back-end development?
    Thanks.

  • How do I delete one song or an entire album from my iTunes library?

    How do I delete one song or an entire album from my iTunes library?

    Click on it from your library.  Press the delete key on your keyboard

  • *How to Delet one same object from different roles*

    I need to delete one auth object from different roles, Couls any one please advise me how can i do this and if there will be any complications involved with tis.
    Best regards:
    Maq

    In PFCG, it may be that you have added some objects manually. To remove them you will have to go to pfcg.
    Even if you first remove the objects from su24, you will have to go to all the roles through pfcg to generate them in expert mode by selecting the third option (edit old status and merge with new data)

  • HT5824 How do I delete an iCloud ID from on my iPhone 5s, The phone only shows my old apple ID, not the new one?

    How do I delete an iCloud ID from on my iPhone 5s, The phone only shows my old apple ID, not the new one?

    Go to Settings -> icloud and then you should see your icloud id, scroll to the bottom and select delete account, you are then able to add your new one.
    Hope it helps
    Lesoot

  • BEx report -two different calculations for a result for one key figure how?

    All,
    Maybe someone could help me with the following, we have a requirement to setup for one key figure two calculations for result rows. One result (average) for one level, and on a higher level -grand total have a (sum), as for our business it makes sense to do it this way. We have setup average for this KF, we get correct results (see below values 7,5 & 6,5) however for the grand total (across multiple products) so for one level up we need to have a different calculation. How could we achieve this?
    Here is an example:
    location     product          inventory     
    AAAA     11111          5     
    AAAA     11111          5     
    AAAA     11111          10     
    AAAA     11111          10     
    AAAA     Result          7,5      ---> average
    AAAA     22222          5     
    AAAA     22222          6     
    AAAA     22222          7     
    AAAA     22222          8     
    AAAA     Result          6,5       -
    > average
    AAAA     Result (across products)          14      ---> here I want to have a sum of averages

    This could be achieve only IF you upload a hierarchy for product inventory with different levels, wherein each level show subtotals and finally grand total will be shown at the end of the results.

  • How do I delete a credit card from my iTunes account without adding another one? My friend bought an app with her credit card and I no longer have the info but every time I try to download a free app (ex: Instagram, Twitter, vine etc.)it ask for the info

    How do I delete a credit card from my iTunes account without adding another one? My friend bought an app with her credit card and I no longer have the info but every time I try to download a free app (ex: Instagram, Twitter, vine etc.) it ask for the credit cards security code. I can not find a way to delete that cards info without adding another cards info.

    http://support.apple.com/kb/ht1918
    http://support.apple.com/kb/ts5366

  • I have over 2000 photos on my iPad2. I have backed them up to my PC. How can I delete most of these from my iPad without deleting them one at a time?

    I have over 2000 photos on my iPad2. I have backed them up to my PC. How can I delete most of these from my iPad without deleting them one at a time?

    The links below have instructions for deleting photos.
    iOS and iPod: Syncing photos using iTunes
    http://support.apple.com/kb/HT4236
    iPad Tip: How to Delete Photos from Your iPad in the Photos App
    http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
    Another Way to Quickly Delete Photos from Your iPad (Mac Only)
    http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
    How to Delete Photos from iPad
    http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
    How to: Batch Delete Photos on the iPad
    http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
    (With iOS 5.1, use 2 fingers)
    How to Delete Photos from iCloud’s Photo Stream
    http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
     Cheers, Tom

  • How can I delete an Apple ID from one device and replace it with a different ID on that same device?

    How can I delete an Apple ID from one device and replace it with a different ID on that same device?

    Tthe brute force method: start with Settings > iCloud and turn off Find My (you will need the password), then change the iCloud ID, then go to the apps such as Messages, FaceTime, etc, and delete the Apple ID and enter the new one.

  • How can i delete one of my 5 computers from itunes? i need to rigistre a new computer...

    How can i delete one of my 5 computers from itunes? i need to rigistre a new computer...

    1)  Open itunes on the computer you want to deactivate. Make sure you are logged in.  Under the "Store" menu, pull down top "De-authorize this computer"
    2)  If you no longer have, or access to, the computer(s) you want to deauthorise,
    Log in to iTunes,  go to "view your account info" on the itunes store,
    Deauthorise all five,
    (Please Note: this can only be done Once every 12 months)
    Then re-authorize your current Computer(s) one at a time..
    Authorise / Deauthorise About  > 
    http://support.apple.com/kb/HT1420

  • How can i delete an icloud accout from iphone 5 (ios 7.0.4)and insert a new one ???

    how can i delete an icloud accout from iphone 5 (ios 7.0.4)and insert a new one ???

    You'll need to contact the previous owner to get them to remove the account.
    There is no way to bypass this security feature. If you can't contact the previous owner you have wasted your money and have a phone you'll never be able to use.

  • How can we delete one Material from Material List?

    Hello Experts,
    How can we delete one Material from Material List? Is their any possibility?

    Hi,
    Instead of deleting you can go for mark for deletion in MM06.
    Thanks
    VSA

Maybe you are looking for

  • Apply Operating System Failed

    Environment: SCCM 2012 R2 CU3 Background: Prestaged image was applied to machine. The prestaged image was created based on our old TS which only contains winpe boot image and the windows 7 operating system. WINPE v4.0 was still used in this prestaged

  • Importance of embedding ICC profiles

    I have created a package of logos in different versions. 30 versions in all. However each logo weights around 1.2 mb. It contains nothing but a few vectors and colors, no blends no images. If I save as unchecking "Embed ICC profile" the weights falls

  • I'm getting an error message when I try to sync

    I am trying to sync my iPhone 4s but it keeps canceling showing an error message that says 'iTunes cannot sync apps to the iPhone because the apps installed on the iPhone could not be determined. Any idea what this means?

  • Could anyone give an validator example?

    <af:inputText label="name" validator="#{localTest.validateName}" id="message"/> <af:message for="message"/> <af:commandButton action="home" text="submit"/> public void validateName(FacesContext facesContext, UIComponent uIComponent, Object object) {

  • Aperture 2.1.4 keep crashing

    aperture 2.1.4 keep crashing. I am on imac os x 10.6.8