How to set a default value for particular field in SRM PO Portal
Dear Gurus,
Im desparetly need a help in web dynpro on how to set a default value for a field(flag) in PO header tab in portal.
My requirement is whenever the user press the edit button in PO screen,automatically a flag field should be set as abap_false.
I dont think this will handle in check badi or change badi. i tried this part in onbuttonpressed overwriteexit in CNR_VIEW views,i can get the function EDIT in debugging mode,but dont know how to proceed further.....
Many of them suggested to go with get attribute and set attribute for changing any particular field in web dynpro,but im not very familiar in using those get and set attributes.I request you people can give me sample code on how to identify my target field in the node and set the values while pressing EDIT Button.
Thanks in advance...
Regards,
Sathish
Dear Laurent,
Thanks for your response,
But i searched in enhancement spot of WD_BADI, but couldnt get the exact way to change the coding,
My real requirement is, that particular flag should be enable and disable dynamically by checking a condition in my header values.So in that case i dont know how to proceed further to handle in the PO screen.
Kinly guide me how to get the particular node of field in the Purchase order screen.
Thanks you in advance,
Sorry for the inconvenience if any
Regards,
sathish
Similar Messages
-
HOW TO SET A DEAFULT VALUE FOR A FIELD?
hi friends
i have doubt..how to set a default value for a field..say like in local printer field i always want lp01 to be displayed defaultly..when i click F1 in that field i get the parameter id ..i know there is something dealt with that parameter id..how can i set that default value ..in the case of the default printer value i made in own data settings as lp01 but how to do it normally for other field which has parameter id ??????
thanks and regards
princeHi Prince,
u can set the default value in abap as given below
SELECTION-SCREEN: BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN SKIP 1.
PARAMETERS : S_BUKRS TYPE BSID-BUKRS OBLIGATORY DEFAULT '1000'.
PARAMETERS : S_BELNR TYPE BELNR_D OBLIGATORY DEFAULT '1600000070'.
PARAMETERS : S_GJAHR TYPE GJAHR OBLIGATORY DEFAULT '2008'.
PARAMETERS : ASON TYPE BUDAT OBLIGATORY DEFAULT SY-DATUM.
PARAMETERS : S_KUNNR TYPE KUNNR MODIF ID GP1.
PARAMETERS : S_LIFNR TYPE LIFNR MODIF ID GP2.
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN : END OF BLOCK B1.
or
u can give the default value in INITIALIZATION also.
vlue = '1000'. -
SRM 4.0- How to set the default values for product type (01) only for SC
The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF -
How to set the Default values for Info Objects in Data Selection of InfoPac
Hi All,
Flat file Extracion:
How to set the Default values for Info Objects in Data Selection Tab for Info Package
ex: Fiscal Year Variant Info Object having values 'K4' 'Y2' etc in Flat file
Initially default value(not constant) for this info Object value should be 'K4' in Info Package
If I set data selection value for this info object K4 it will retreive records with this selection only? how to handle
Rgds,
CVHi,
suppose as your ex. if you are having fiscalyear variant in the dataselection tab then specify K4 in the from column, again the ficalyearvariant row and click on insert duplicate row at the bottom . you will get another row . In that enter Y2 in the from column. now you can extract K4, y2 values .
haritha -
How to set a new value for formula field in crystal reports xi?
<p>How to set a new value for formula field in crystal reports xi?</p><p>//formula</p><p>{@description}</p><p> </p><p>exemplo in VB6</p><p>crxSubreport.FormulaFields.Item(1).Text = "'Subreport Formula'" or</p><p>crxSubreport.FormulaFields.Item("description").Text = "'Subreport Formula'"</p><p>How to in JRC?</p><p> </p><p> </p><p> </p><p> </p><p> </p><p> </p><p> </p><p> </p>
Hi,
This functionality is known to be very important and is a key part of the next major release of the JRC planned for the first half of 2008.
Regards,
<p>Blair Wheadon</p>
<p>Product Manager, Crystal Reports</p> -
How to set the default values for print options
Hi all,
We can set the default value for print options, just like Logical destination、numbers of messages、print immediately and so on, so where we should to maintain these default?Hi Sandy,
This can be done by an abaper by making changes in the driver program. The Driver program feeds all the data which u have mentioned for printing.
if the driver program is standard. copy to an z type and make modification on printer settings on the driver program code.
this will surely solve the issue.
Regards
Gunaseelan -
How to set the default values of the field of the context.
Hi Experts ,
I want to set the default value of the field of the context.
Where and how this declaration should be done.
Thanks in Advance.In the context tab of the view. Select the attribute for which you want to set the default value.it will show the properties at the bottom. set the Default value property to the value which you want to set as the default value.
Regards
Naresh -
Hello Everyone
I have two drop downs. Both are coming from look up fields from two lists. i want to set a default value(first list item) for the first drop down list box and then apply cascading based on the default value for the next drop down list box. I found one article(http://www.bizsupportonline.net/infopath2010/display-first-item-drop-down-list-box-infopath-2010.htm)
where in i can set a default value but i can't apply cascading based on that default value. Any suggestions would be highly appreciated.
Thanks
Ramanjulu Naidu NHey Ramanjulu,
Take a look at the below article which I believe will answer your question.
http://basquang.wordpress.com/2010/03/29/cascading-drop-down-list-in-sharepoint-2010-using-infopath-2010/
Daniel Christian (MCTS) -
How to set the default values for fields
Hi all,
How to show the default values without changing the existing code in the CO for the seeded page.
I have requirement like one drown box in that three values are there. On page load the item is empty , but i have to show first value as default value. Is this possible through personalization..
Can any body have idea pls give some suggession.
Thanks
UmaConsidering you don't want to go for controller extension..
A way is to use java script in personalization.
Simply create a RawTextBean using personalization and add the java code to change the properties.
Java script plan:
Get the handle of the items to change (like here drop down)
selectTags=document.getElementsByTagName('select') --gives list of all the select tags in the page
get ID of the select tag whose value you want to change (loop throug selectTags array).
or get it directly by getElementsByName method or getElementsByID mETHOD.
Say its handle is changeItemID.
changeItemID.selectedIndex=2
Overview of script
<SCRIPT type="text/javascript">function _checkLoad(eventXX){
--yOUR CODE FOR GETTING handle Of the select item whose value is to be changed,goes here...
changeItemID.selectedIndex=2
}</SCRIPT> -
How to set a default value for a page item
I am working with a facility table that has name and address information. The user can add contact name information on a separate page. Since the address for the facility and contact is usually the same, I want to add a default value for the contact address. The facility page is on 201 and the link to add a new contact row is on page 202. I showed in the default value :P201_street for the contact's address. But, when I run the page, the contact address field shows the :P201_street, not the actual facility address. What am I leaving out? Must be something obvious?!
Thanks very much.
JudyIn the default value, I showed: v('P201_STREET1') with the default value type of: PL/SQL Expression and received the following oracle error ==> Item default is not a PL/SQL expression. Use &ITEM syntax. The v('ITEM') syntax is not valid for item defaults. So I changed it to: &P201_STREET1 and got another oracle error , ERR-9132 error in PLSQL expression for item default code, item=P202_STREET1.
Any more suggestions? Thx.
Judy -
How to set a default value to a field in *_BrowEdit.jsp?
I know that we can use:
<jbo:AttributeIterate id="def" datasource="<%=dsName%>">
<jbo:RenderValue datasource="<%=dsName%>"/><br>
</jbo:AttributeIterate>
to accept value .
And now ,I want to set a default value to a filed.
How to do?Hi,
This functionality is known to be very important and is a key part of the next major release of the JRC planned for the first half of 2008.
Regards,
<p>Blair Wheadon</p>
<p>Product Manager, Crystal Reports</p> -
SQLLDR - how to set a default value for an empty string
I'm using SQLLDR to load data from a flat file on Oracle 10g 10.2.0.4 EE, Linux RHEL 4 update 6. Seems like my question is simple, but darned if I can't find the solution.
My source file (comma delimited extracted form a different RDBMS) has some (not all) rows where the output for a string is "", and not NULL. How do I check for empty string and add a default value in the control file? The target column is non-nullable
Here's my current control file - however, the column attributeName where sometimes the source record is "" does not get evaluated as NULL.
load data
infile 'mydata.del'
badfile 'mydata.bad'
discardfile 'mydata.dsc'
into table mydata
fields terminated by "," optionally enclosed by '"'
TRAILING NULLCOLS
(l_metadata,
company,
className,
attributeName "decode(:vc_attributeName,null, 'none')",
attributeDefault)
{code}
When I tried decode with "", I received the following error:
{code}SQL*Loader-350: Syntax error at line 11.
Expecting "," or ")", found ", 'none')".
attributeName "decode(:vc_attributeName,"", 'none')", {code}
This does not work either:
{code}
load data
infile 'mydata.del'
badfile 'mydata.bad'
discardfile 'mydata.dsc'
into table mydata
fields terminated by "," optionally enclosed by '"'
TRAILING NULLCOLS
(l_metadata,
company,
className,
attributeName NULLIF attributeName = BLANKS ,"decode(:vc_attributeName,null, 'none')",
attributeDefault) I get the following in the log:
Table COMPANYMETADATA, loaded from every logical record.
Insert option in effect for this table: INSERT
TRAILING NULLCOLS option in effect
Column Name Position Len Term Encl Datatype
L_METADATA FIRST * , O(") CHARACTER
COMPANY NEXT * , O(") CHARACTER
CLASSNAME NEXT * , O(") CHARACTER
ATTRIBUTENAME NEXT * , O(") CHARACTER
NULL if ATTRIBUTENAME = BLANKS
SQL string for column : "decode(:attributeName,null, 'none')"
ATTRIBUTEDEFAULT NEXT * , O(") CHARACTER
Record 1: Rejected - Error on table COMPANYMETADATA, column ATTRIBUTENAME.
ORA-01400: cannot insert NULL into ("SRV5"."COMPANYMETADATA"."ATTRIBUTENAME")
{code}
Any help is appreciated -
Edited by: kpw on Feb 9, 2009 11:10 AMHello,
I just loaded following data successfully in my_data table using the same control file I posted. Yes it will evaluate "" as null and replace with none, remember in control file you have this option, "optionally enclosed by '"'.
#my_data.dat
"myname1", "attribname1"
"myname2", "attribname2"
"myname3", "attribname3"
"myname4", ""
#my_data.ctl
load data
into table my_data
fields terminated by "," optionally enclosed by '"'
TRAILING NULLCOLS
my_name char(30),
vc_attributeName "decode(:vc_attributeName,null, 'none', :vc_attributeName)"
{code}
Here is the output log file
{code}
Control File: my_data.ctl
Data File: mydata.dat
Bad File: mydata.bad
Discard File: none specified
(Allow all discards)
Number to load: ALL
Number to skip: 0
Errors allowed: 50
Bind array: 64 rows, maximum of 256000 bytes
Continuation: none specified
Path used: Conventional
Table MY_DATA, loaded from every logical record.
Insert option in effect for this table: INSERT
TRAILING NULLCOLS option in effect
Column Name Position Len Term Encl Datatype
MY_NAME FIRST 30 , O(") CHARACTER
VC_ATTRIBUTENAME NEXT * , O(") CHARACTER
SQL string for column : "decode(:vc_attributeName,null, 'none', :vc_attributeName)"
Table MY_DATA:
4 Rows successfully loaded.
0 Rows not loaded due to data errors.
0 Rows not loaded because all WHEN clauses were failed.
0 Rows not loaded because all fields were null.
Space allocated for bind array: 18560 bytes(64 rows)
Read buffer bytes: 1048576
Total logical records skipped: 0
Total logical records read: 4
Total logical records rejected: 0
Total logical records discarded: 0
Run began on Mon Feb 09 18:17:35 2009
Run ended on Mon Feb 09 18:17:36 2009
Elapsed time was: 00:00:00.98
CPU time was: 00:00:00.10
{code}
Hope this helps clearing your dobuts
Regards -
How to set the default value for page item in report
Hi Gurus
I currently i have company name as page item in one of my report screen ,but it is displaying the value for company name in its drop down column ,but i want to make it "*ALL* as default after the query result ",this is user requirement ,please share ,how can i make it ,is it possible ??,thanx in advance
thanx
PratapHi,
I don't think this is possible. You can of course use a parameter to select the page item and default the parameter but then the user will have to rerun the report to see other pages items.
Rod West -
Urgent: How to set a default value to CLOB field?
Hi All,
As per the requirements we have to populate the CLOB field in a template with default value with some template similar to a letter issued to clients in bank.
So, every time when I insert a record in that table this CLOB field should have that letter template populated by default and user will modify that if required from GUI.
How can I populate that CLOB field by default?
Thanks!Something like this?
ME_XE?
create table test_clob
pk_value number primary key,
one_clob clob default rpad('something', 32000, '*')
insert into test_clob (pk_value) values (1);
select * from test_clob;
Table created.
Elapsed: 00:00:00.13
ME_XE?ME_XE?
1 row created.
Elapsed: 00:00:00.09
ME_XE?ME_XE?
PK_VALUE ONE_CLOB
1 something***********************************************************************
1 row selected.
Elapsed: 00:00:02.65
ME_XE?ME_XE?
ME_XE?ME_XE?select * from v$version;
BANNER
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for Linux: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
5 rows selected.
Elapsed: 00:00:00.18
ME_XE? -
How to set a default value for a input dialog
I use JOptionPane.ShowInputDialog("Input Please");
JOptionPane.showInputDialog("hello", "default");Also, this would be helpful:
http://java.sun.com/j2se/1.4/docs/api/javax/swing/JOptionPane.html
Maybe you are looking for
-
Single invoice for multiple DO & Output for the same!
Dear Gurus, I have configured an output type for Export & its for Collective billing,where we have a contact,a sales order and multiple Outbound deliveries but have one collective billing for multiple DOs. Here the issue is :- 1-when i go for collect
-
Safari 4.0.3 for windows crashes alot
just wondering if this is a known issue. somtimes safari will just crash as if id pressed the close button. I am running it on Windows server 2003 if that makes any difference, though it still does it under windows xp and 2000 compatibility mode.
-
Search function for own Shapes
Hallo, i want to search for my selfmade Visio Shapes. The Visio search function can´t find my Shapes. I copied my Shapes in C:\Users\Username\Documents\My Shapes but is doesent work. What´s my mistake? Thanks in Advance
-
Ways to activate debug log on JavaFX 8 / support for bug reports ?
Hello, Since, there is to much time until next march, I've downloaded the JDK8 u 87 and started to play with JavaFX 8. Very nice things, but I am going into a lot of obscure bugs * For example, when closing an application that does only CSS styling I
-
Graphics2D assumes 72 dpi resolution
hi all, I have a problem. While The aToolKit.getScreenResolution( ) shows the default resolution, the Graphics2D apparently assumes 72 dpi resolution. This is especially awful in respect to "native" applications, where fonts et all look totally diffe