How to stop closing RR when sample size is not fully checked

Hi
My scenario is as follows:
My sample size in RR is 10 where as results recorded are only for 7.(Single result). In such cases, RR should not be allowed to close. Should be allowed to close only when results are recorded for 10 nos.
How to do this?
Thanks
Sudhar

Hi
use User exit
QEEM0011 User exit: add. functions before valuating insp. characs.
here you can check wheather all 10 nos( or as per sample size) char are entered or not.
Regards
Sujit

Similar Messages

How to stop while loop when a specified function is terminated?

I want to make a program which has 2 thread, one of which is to control some devices, and the other is to measure outputs of the devices.
To do that, I should make a 2 independent loops, but there comes a problem here.
I want to terminate 2 loops at the same time, but it's difficult for me to do that, because when I try to notify upper sequence's termination to lower loop by some value change, they have some dependency.
That's why I need your help. I want to know how to stop lower loop when the upper sequence's termination keeping their independency.
Please let me know. Thank you.
Attachments:
help.JPG ‏200 KB

Is the upper loop commanding the lower loop at all? I would think you would have some type of communication between the loops. Just use that communication to send a stop command. Or the next best way is to just simply use a notifier.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

How to stop drop down when trying to open file?

how to stop drop down when trying to open file?

Offer more details and you ay get an answer.
What files/type, applications, what exacttly you are doing?

The fully charged battery symbol shows up (a plug instead of a lightning bolt) when it's actually not fully charged! It also stops charging!

The fully charged battery symbol shows up (a plug instead of a lightning bolt) when it's actually not fully charged! It also stops charging! How do I fix this?

Did you already try to set it up "as new device" How to back up your data and set up as a new device
If this does not work, try again, this time without using the latest backup, in case it contains corrupt data, causing your problems.

I have a new computer and my old drive has my UNSAVED bookmarks on it and I want to import them, how do I do it when the bookmarks are not SAVED?

I have a new computer and my old drive has my UNSAVED bookmarks on it and I want to import them, how do I do it when the bookmarks are not SAVED?

You can backup the bookmarks on the old computer and create a JSON or HTML backup and restore or import this file in the Bookmarks Manager (Bookmarks > Show All Bookmarks).
You can use an USB stick to transfer the saved bookmarks file to the new computer.<br />
You can also copy the places.sqlite file from that computer to have the bookmarks and the history.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
*http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

How to stop PO output when the indicators are updated with a prog. **URGENT

Hi,
I have developed a update prg which will update the Final invoice indicator and Goods reciept indicator in SRM as well as in R/3 only for 'ORDERED' PO's. This was done using BBP_PO_PD_UPDATE FM. Everything is working fine, all the indicators are getting updated as expected both in SRM and R/3.
Only problem is that when the indicators are updated in SRM, PO Output is getting generated which should not happen.
Do you have any idea how to stop the OUTPUT.
This is very urgent.
BR,
Parvez.

PO output
PO Output problems
disable PO output on po change in SRM

How to stop screen expansion when I awake in new os update

When I awake my Z10 the screen expands or magnifies itself so I have to squeeze it to fit all the screen in. Very annoying any ideas how to stop it?
Solved!
Go to Solution.

Hi pgaffney,
Please see the following forum post for a resolution to this issue.
Please go into Settings > Accessibility, and ensure the "Magnify Mode" is disabled.
Did someone help you? Click Like! Did a post solve your issue? Click Accept as Solution!

How to stop iPhoto opening when connecting a device

I want to stop iphoto opening when I connect my iphone, I can't find this in iphoto's preferences, any ideas?
This is iphoto 6

That worked thank you
Just to clarify, you have to have the device connected to alter the preference.

How to stop BAPI(FM) when enter data from front end is calling a BAPI

Hi Experts
We are entering the data through front end , that is calling one BAPI and upadating the data
into SAP .
could any one tell me how to stop this BAPI , is it possible to stop that BAPI using external break points
Thanks.

Is this BAPI Called in another task? Otherwise, you should be able to debug it like any other Function module in foreground.

How to stop cellular connection when at home with wifi

I frequently download large fies to iPad then realize I'm still connected to ATT cellular while at home with wifi. How do I make iPad switch to wifi automatically when at home and not pay for cellular downloads by mistake?

arislgr wrote:
I cannot figure out the connectivity settings when I am at home, so that I don’t pay for cellular data charges.
Even though my WLAN is available, or even if I first connect to it manually and the browser is using it, many widgets/apps insist on using my cellular (Vodafone) connection for data transfer.
I have tried various settings in Menu/Settings/Connectivity/WLAN/Settings.
Here are the latest ones::
Switch to LAN: Known WLANs only
Data Use in home Network: Always Ask
Data use when roaming: Always Ask the
No good......
Change the #2 to WLAN Only instead of Always Ask and it will kill any Cellular Data connection.

How to get last time when tablespace size increase

Hi all,
I need last date and time when tablespace size was extended. Kindly tell me is there any query which can help me.
Thanks

possible if you've 10g database and holding license to use AWR.
table name is dba_hist_tbspc_space_usage
SELECT TO_CHAR (sp.begin_interval_time,'DD-MM-YYYY') days
, ts.tsname
, max(round((tsu.tablespace_size* dt.block_size )/(1024*1024),2) ) cur_size_MB
, max(round((tsu.tablespace_usedsize* dt.block_size )/(1024*1024),2)) usedsize_MB
FROM DBA_HIST_TBSPC_SPACE_USAGE tsu
, DBA_HIST_TABLESPACE_STAT ts
, DBA_HIST_SNAPSHOT sp
, DBA_TABLESPACES dt
WHERE tsu.tablespace_id= ts.ts#
AND tsu.snap_id = sp.snap_id
AND ts.tsname = dt.tablespace_name
AND ts.tsname NOT IN ('SYSAUX','SYSTEM')
GROUP BY TO_CHAR (sp.begin_interval_time,'DD-MM-YYYY'), ts.tsname
ORDER BY ts.tsname, days;http://maxwellmiranda.wordpress.com/2011/03/22/segmenttablespace-growth-details-script/

Sample size does'not appear in QA02 of created Inspection lot Number.

Hi Experts,
I have created a production order of a material and its Inspection lot is automatically created but the inspection lot created does'not have sample size from the stock as a result I am unable to perform result recording of a inspection lot.
Please correct me if i am wrong.
Thanks
Saurabh

Dear Saurabh Mishra.
Kumar & Barjatya's said is right. and more you can consider for solve this problem as below step;
- You must change the sampling procedure in the inspection plan. After you have reset the sample
in QAC3
    1. First you must change the sampling procedure to fixed sample (assuming you have 100%
        inspection at present) in QDV2 or
        create a new sampling procedure (as Naik remarked) with fixed sample in QDV1
    2. Then assign the changed sampling procedure in the inspection plan through QP02
    3. Then assign a sample quantity in the inspection plan in the same transaction (QP02) for the
        inspection characteristic to be inspected
    4. Save the inspection plan, and run QA02 where you re-assign the updated inspection plan and
       re-do sample calculation.
       For GR based lot i have already stated what has to be done. In case of an inspection lot caused
       due to the GR from a process or purchase order, cancel the GR. The inspection lot is also
       cancelled. Then follow steps 1 to 3. In the 4th step after saving the inspection plan, simply do the
       GR again, It should work out.
Regards,
Jeong, Yeong-Chul

Regex: How do I match only when a string is not entirely numeric?

Hi,
I'm using java regular expression pattern matching. I want to receive a successful pattern-match ONLY when a string is NOT comprised entirely of numeric digits [0-9].
So, for example, when pattern-matching on the following 3 strings,
"abcdef" would return match = true and
"abc123" would return match = true and
"123456" would return match = falseI have tried using the regex pattern [^0-9] but this only seems to work for strings that are one character long. The pattern [^0-9]+ didn't work either.
What I need is the equivalent pattern to [^\d+] (which is an invalid pattern).
Please note that I have to solve this one using regular expressions, even though it would be trivial to solve using straight java code!
Any help much appreciated.

What I need is the equivalent pattern to
[^\d+] (which is an invalid pattern).Well as its an invalid pattern, how exactly do you expect us to know what you mean by it?!?
Based on your textual description of what you want, and on the basis that you seem not to want to negate theopposite, how's this (I assume we're talking core Java regex's?):
myString.matches(".*[^\\d].*");

How to stop iPhone to mail and remove my notes?

I use notes on my iPhone to write down little snippets and ideas for new articles. I don't want to receive them by mail and being removed from my iPhone.
Please, how to stop this unwanted syncing?

I can only suggest at this point to restore your phone as a "new" device, NOT from backup. Follow this by syncing your iTunes content back to your phone & setting up your mail account from scratch.

How to stop symbol-content from changing size when symbol size changes?

When I change the size of a symbol, the content is also resized. I want my symbol to act as a viewport: when I make the symbol half as high, the content shouldn't be transformed, you only should see half of the content instead of transformed content. Make the symbol's boundaries act as a cropper, if you get what I mean. How do I do this?

Hi Jack,
I think (not sure though) that the Library Item is causing the problem. I never use the Library Item because server side includes are far more efficient and need less maintenance.
Have a look here http://foundationphp.com/tutorials/sprymenu/ssi.php
If you have PHP serverside scripting language, use DW to add serverside includes using PHP.
Getting back to your original problem, try without the Library Item and see if DW still changes the code.
I hope this helps.
Ben

How to stop closing RR when sample size is not fully checked

Similar Messages

Maybe you are looking for