How to uncover and use the hidden Service menu on the Galaxy S3

I ran across this article over at Android Central that appeared interesting, there appears to be a diagnostic menu built into the S3 software to test the hardware for defects, this may be a useful item for any users that feel that they have a defective device... Check out the article at How to uncover and use the hidden Service menu on the Galaxy S3

That's good to know that such options exist in phones.

Similar Messages

How to install and use a plug-in downloaded from the apple site?

how to install and use a plug-in downloaded from the apple site?

Emelie,
which plug-in do you want to install?
some of the plug-ins come with an installer on the disk image, you click the installer and it will install it in its proper location.
For others you move the plug-in into to System Library or your User Library:
Your Hard disk > Library > Application Support >Aperture > Plug-Ins > Edit
or
Your Home Folder > Library > Application Support >Aperture > Plug-Ins > Edit
If it is an "Edit" plug-in, it goes into the "Edit" subfolder, "Export" plug-ins into the "Export" subfolder.
You can tell by the extension, what kind of plug-in it is.
E.G. BorderFX.ApertureExport is an export plug-in, BorderFXEditPlugin.ApertureEdit an edit plug-in.
Regards
Léonie
P.S. In OS Lion the Libraries are hidden by default: To reveal your User Library activate the Finder and select from the main Finder menu:
    Finder > Go , then hold down the ⌥-option-key, untill the Library appears in the drop.down menu.
To show the System Library:
     Finder > Go > Go to Folder
then enter   / Library

How to install and consume GroupWise Web Service (SOAP)

Hello! I'm Razvan, programmer from Romnia, and I am new to GroupWise development.
I am asking if anyone could help me with a C# Visual Studio 2010 example of how to install and consume GroupWise Web Service (SOAP).
The documentation from novell site didn't help me, i didn't understant much of it.
All I need is either a link to a documented GroupWise C# developer step-by-step tutorial, or some code examples.
Can you please show me some code examples in C# with:
1)loging in using a username and a password,
2)retrieving contact list,
3)retrieving appointment list,
4)sending a mail,
5)setting an appointment
I don't know how to use "groupwise.wsdl" and customise it so that it points to our GroupWise server.
Please, I really need this because I am working at a project right now which involves GroupWise integration.
I hope I haven't disturbed anyone with my simple question.
I know this might be a very simple question given the complexity of the other posts here, but that's why I really hope I will get an answer soon.
Thank you very much!
Signature:
How old is the Orthodox faith?
How old is the orthodox faith?

Just a comment.
The value for the version element should be "1.02"
not "1.2".
Preston
>>> On Tuesday, March 01, 2011 at 8:06 AM,
TheRomanian<[email protected]> wrote:
> I have great news! After strong documentation yesterday and today, I've
> just made a successfull example that actually connects to our GroupWise
> server.
>
> I made it in PHP.
>
> I need an ASP.NET + C# application, but now is very simple to convert
> it. I post the PHP code here for other people who in future might be
> interested in finding out.
>
> So a simple PHP GroupWise Login code using "groupwise.wsdl" web
> service:
>
>
> require_once('./GWService/GroupwiseService.php');
> require_once('FB.class.php');
>
> $classmap = array(
> 'Authenication' => 'Authenication',
> 'PlainText' => 'PlainText',
> 'loginRequest' => 'loginRequest',
> 'loginResponse' => 'loginResponse',
> 'logoutRequest' => 'logoutRequest',
> 'logoutResponse' => 'logoutResponse',
> 'UserInfo' => 'UserInfo',
> );
>
> $gwservice = new GroupwiseService(
> "./WSDL/groupwise.wsdl",
> array(
> "location" => "http://11.150.40.78:8756/soap",
> *Your GroupWise server IP:
> and PORT*
> "classmap" => $classmap,
> "trace" => true)
> );
>
> // do login
> $pt = new PlainText();
> $pt‑>username = *"YOUR GROUPWISE USERNAME"*;
> $pt‑>password = *"YOUR GROUPWISE PASSWORD"*;
>
> $lr = new loginRequest();
> $lr‑>auth = $pt;
> $lr‑>language = "en";
> $lr‑>version = "1.2";
> $lr‑>application = "phpClient";
>
> $lres = $gwservice‑>loginRequest($lr);
> //print_r($lres);
>
>
> I Hope this will help others.
>
> ‑‑
> Signature:
>
> How old is the Orthodox Faith?
> 'How old is the orthodox faith?'
> (http://www.orthodoxphotos.com/history.shtml)

How to use the same services-config for the local and remote servers.

My flex project works fine using the below but when I upload my flash file to the server I doesn't work, all the relative paths and files are the same execpt the remote one is a linux server.
<?xml version="1.0" encoding="UTF-8"?>
<services-config>
    <services>
        <service id="amfphp-flashremoting-service"
            class="flex.messaging.services.RemotingService"
            messageTypes="flex.messaging.messages.RemotingMessage">
            <destination id="amfphp">
                <channels>
                    <channel ref="my-amfphp"/>
                </channels>
                <properties>
                    <source>*</source>
                </properties>
            </destination>
        </service>
    </services>
    <channels>
    <channel-definition id="my-amfphp" class="mx.messaging.channels.AMFChannel">
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
    </channel-definition>
    </channels>
</services-config>
I think the problem is the line
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
but I'm not sure how to use the same services-config for the local and remote servers.

paul.williams wrote:
You are confusing "served from a web-server" with "compiled on a web-server". Served from a web-server means you are downloading a file from the web-server, it does not necessarily mean that the files has been generated / compiled on the server.
The server.name and server.port tokens are replaced at runtime (ie. on the client when the swf has been downloaded and is running) not compile time (ie. while mxmlc / ant / wet-tier compiler is running). You do not need to compile on the server to take advantage of this.
Hi Paul,
In Flex, there is feature that lets developer to put all service-config.xml file configuration information into swf file. with
-services=path/to/services-config.xml
IF
services-config.xml
have tokens in it and user have not specified additional
-context-root
and this swf file is not served from web-app-server (like tomcat for example) than it will not work,
Flash player have no possible way to replace token values of service-config.xml file durring runtime if that service-config.xml file have been baked into swf file during compilation,
for example during development you can launch your swf file from your browser with file// protocol and still be able to access blazeDS services if
-services=path/to/services-config.xml
have been specified durring compilation.
I dont know any better way to exmplain this, but in summary there is two places that you can tell swf about service confogiration,
1) pass -services=path/to/services-config.xml parameter to compiler this way you tell swf file up front about all that good stuff,
or 2) you put that file on the webserver( in this case, yes you should have replacement tokens in that file) and they will be repaced at runtime .

How to deploy and debug java web service in eclipes or using any other soft

Hai,
can any one tell me how to deploy and debug java web service in eclipes or using any other software.
i have used tomcat web server and jdk1.4.0 to develop web service.
we have used web service to interact with MS outlook .
bye
sudhakar.m

Hi Sudhakar,
If you are used to working with ant then you can very well use eclipse to deploy your web service.
You would usually have the ant script in the source root working directory. From eclipse if you select the build file from the navigator view and right click you will see a run ant option in the pop up menu.
Select that option and you would be able to see each targets with a checkbox select option. So define each target maybe one for wsdl2java conversion, one for compilation and one for deploying your web services. You can either make all of them run by having depends option on or you can run them individually as it takes your fancy.
I am not sure about debugging a web service yet.
Hope this helps
Aviroop
The truth is out there? Does anyone know the URL?

Rescue and Recovery and the Hidden Service Partition

When I got my G41 ThinkPad in November 2004 it had a Hidden Service Partition
of size 693 Mb. I'm a fan of Rescue and Recovery and upgraded it successfully
up through version 4.0, but when I tried to upgrade to 4.1 and later to 4.2 I got
an error that said there was not enough free space. After I learned that the error
was referring to free space in the Hidden Service Partition I had my hard drive
repartitioned so the Service Partition was 4 Gb. R & R 4.2 then installed, and I'm
now on version 4.21.0016.00.
The other day I noticed that my free space on C:\ had dramatically increased, and
on further investigation I found that my Hidden Service Partition was again 693 Mb.
I don't know how this happened, unless it was the result of my starting to rejuvinate
my system and then later cancelling out of that processs and doing a full restore. I
still get the 4.2 Rescure and Recovery menu on hitting the blue Access IBM button
when I boot, and it seems to work as expected.
My question is: Should I have my HDD repartitioned again to make a 4 GB Hidden
Partition?
Bob Stockler
G41 - 2886-5TU - Mobile Pentium 4 532 - 3.06 Gh
2 Gb RAM - 80 Gb Toshiba 5400rpm HDD - Win XP Pro

Hi,
I think your laptop is not set to boot from the DVD-rom. You have to 1st go to bios and set the 1st boot device to be the dvd-rom. After that, insert the recovery startup disc and it should take you to the recovery menu.
BTW, you should be able to recover from the service partition as long as you have not deleted it, even if windows is screwed up. Make sure you press the blue Thinkvantage button or the F11 key at startup and only then will it take you to the recovery menu.
Hope it works.
Message Edited by zachareth on 04-23-2009 11:08 AM

Hello guys..does anybody know how to install and use adobe master collection with the new lion? I need to use Flash and illustratore, but apparently those programmes are incompatible with the new operative sistem... I am a new mac users and I'd like t

Hello guys..does anybody know how to install and use adobe master collection with the new lion?
I need to use Flash and illustratore, but apparently those programmes are incompatible with the new operative sistem...
I am a new mac users and I'd like to know if there are other similar programmes I can use with lion!

Lab79 wrote:
Are you on Apple's payroll?
well dude I can only let you know that as I work with those programme I don't have to pay for it is my company that pays the programme I whant to use( that's why I was asking if there where other programmes ..that I could use with lion insted that Illustrator and Flash!)..I know Adobe since 2005 and I can say that Adobs products are very good...I think that if it's an Adobe probleme or fault ..they will solve it very soon...but unfortunally I have the impression that after Jobs passed away Appel decided to change politics..and everything started to go very bad! (see FCP X)..
good luck with apple dude..
Where is the Apple problem? I have CS4 and CS5 running perfectly fine on my Macbook Pro. Installed 5 after Lion upgrade. Worth every cent. Adobe did have some catching up to do with Lion but with the CS5.5 update all runs fine. But not yours. So it is a problem with the Lion OS? You say you have been with Adobe since 2005. So you would be aware of all the other issues that Adobe had catching up with past Oss in Mac and Windows then. They get it right, but it is up to them. It is not up to Apple, nor Microsoft for that matter, to run around and check that every software developer in the world is running their business properly.
And what has politics got to do with anything. Some people just have to blame Software for their poor Hardware maintainence of failure of the same.
<The only think I can really do is to go back on my old windows...give back this orrible lap top and ask for my money back!>
Great suggestion. You should go with that one, but good luck getting a refund.
Bye

How to install and use the Khmer unicode Khmer MEF1 and Khmer MEF2?

How to install and use the Khmer unicode Khmer MEF1 and Khmer MEF2?
from www.mef.gov.kh in the bottom of the page, you can get the unicode for the ms office

I think that stuff is for windows, a waste of time trying to use it on a Mac.
There is no need to download anything for Khmer on a Mac. Apple provides Khmer fonts and keuyboards with OS X.
OS X Mountain Lion: Type in another language
MS Word for Mac does not support Khmer. Use TextEdit, Pages, Nisus Writer, LibreOffice instead

I am using Photoshop CC2014 15.00. In the pop-up menu for the Fill command there is a place for Scripted patterns. Within that part, the tree and the picture frame are grayed. Why?   I've seen demonstrations on how to use the feature but mine doesn't wo

I am using Photoshop CC2014 15.00. In the pop-up menu for the Fill command there is a place for Scripted patterns. Within that part, the tree and the picture frame are grayed.
Why?   I've seen demonstrations on how to use the feature but mine doesn't work. I checked the updates and I have the current version.
Thanks.      LM

I am running CC 2014.2.1 and I've updated to Yosemite. Not seeing tree or frame as an option in the menu. Coworker still on Mavericks has it.

Where can I learn how to setup and use the new features in Mountain Lion?

Where can I learn how to setup and use the new features in Mountain Lion?

MacWorld has a Superguide, TidBITS has Take Control books, and probably a flock of other publishers have physical books.

I need to know how to access and use the Blue Tooth device that comes with the Thinkpad W520

Forgive me for being a techo illiterate. But I know that this thing supports Blue Tooth. And one "problem" with it is although it has a DVD and sound card, music and movies have very lousy audibility. Is there something I can do about that? I can barely hear anything on a movie unless I plug in head phones to the computer. But that leaves me stuck in my seat. I'd like to get cordless headsets. And I'm ready to purchase the Plantronics BackBeat 903+ Wireless Stereo Headphones - Mic, Rich Audio, Bass-boost, Voice Alerts, OpenMic, 3-way Earpiece. And have heard that it's compatable with a pc that has Bluetooth capabilities. but could someone get back to me with exactly how I access and use the Blue Tooth device?

I was searching for how to setup the 903+ and my W520 and came to this thread.
1. The OP was asking about audio and there are updated audio drivers / tweaks to get it louder / install different drivers.
but if you are going to go BT headset....
2. What I did for the 903+
Uninstalled the currently installed ThinkPad Bluetooth program. ( I forget the exact name, came stock and was out of date).
Required reboot.
Activated the Bluetooth with FN + F5 menu.
Downloaded the updated Bluetooth driver from lenovo (search lenovo driver matrix).
Ran the updated Bluetooth driver install.
Rebooted for good measure.
Double-clicked the Bluetooth Tray icon.
Clicked Add A Device.
Turned off my 903+ and continued to hold down the power to enable pairing mode.
Showed up in devices and added it.
Worked for audio. There are probably additional options for enabling the mic.
Hope that helps whoever might find this thread.

How to control and use the search criteria values "%" ?

Hi,
When I searched some information in my employee name. I filled in search criteria values "%" and selected the "Go" button to see the result. But I got errors that the search criteria values should not begin with a "%" or "_" for at least one if the listed fields.
How to control and use the search criteria values "%" ?
Thanks,
sinolee

sinolee,
These kinds of details are mentioned in Dev guide. Always have a look into dev guide before posting.
--Shiv

How long does it take for a cancellation fee to process? I just cancelled today and the customer service agent say the cancellation payment went through, but i see no charge on my credit card. On the website it say my cancellation is effective in march 16

How long does it take for a cancellation fee to process? I just cancelled my annual subscription to adobe audition today and the customer service agent say the cancellation payment went through of $74.90, but i see no charge on my credit card. On the website it says my cancellation is effective in march 16, 2015. So when will i be charged?

Hi ,
I'm very sorry to hear of the problems you have had moving to pay as you go.
Please can you give customer service a call and ask to speak to the pay monthly retentions team who will be able to fix this issue for you.
Click here for contact details.
Thanks
James

Hello friends , I have started with writing c code on mac using xcode .....but one of my friend told me to use gcc for coding. He started with terminal And used a text editor to compil the c program on his mac.. So please tell me how to do the same

Hello friends , I have started with writing c code on mac using xcode .....but one of my friend told me to use gcc for coding. He started with terminal And used a text editor to compil the c program on his mac.. So please tell me how to do the same and is there any pre stalled text editor on mac if yes then where and if no then which text editor to install and how to install gcc...please help me out thanks in advance !!!

I have started with writing c code on mac using xcode .....but one of my friend told me to use gcc for coding.
Why? If you are developing and writing code on a Mac why would you not use the tools Apple has given you? And Xcode, once you get use to it, is a very nice development environment that will make you life a whole lot easier.
If you insist on using an editor and the terminal I would recommend Emacs but it has a long learning curve so something like TextWrangler will work too.
As for the compiler if you have Xcode installed install the command line tools and you will be able to compile from the terminal.
good luck

Hi can you still turn off 3G and use only GPRS service on the 5s?

Hi can you still turn off 3G and use only GPRS service on the 5s?

Whether you have a setting to do such is determined/controlled by your carrier.

How to uncover and use the hidden Service menu on the Galaxy S3

Similar Messages

Maybe you are looking for