HT1212 Reset does not work on disabled Ipod touch. I did the never synced device option on a computer that we have never synced with. Still says try again in 22,462,172 minutes. Itunes says it cannot sync also. Any ideas???
Reset does not work on disabled Ipod touch. I performed the reset procedure Apple recommended and it did not work(Never synced device with itunes). Comes back to try again in 22,462,160 minutes. I tunes says Ipod is locked and can not access. Any ideas???
Thank you
Place the iPod in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Similar Messages
-
When logging in into yahoo mail after typing in password Firefox is adding something, probably remembered password and login fails all the time. At yahoo mail Notepad does not work because it is impossible to close the list of items and they cover information, so I have to go to IE.
Only when i go to a different browser (like IE) after i clear it , then all that shows up is the pages i visited in IE , that is what bugs me , why is IE browsing history sowing up in Firefox ??
Basically , i can clear the history in Firefox , and then for a example , go to Craigslist , using IE7 (launching it from a complete different Icon , in other words at that time i never open Firefox) , then after closing out , or even leaving open as it does not seem to matter , i go into Firefox , and hit History , and there is every place i visited in IE7 , on my History in Firefox -
I fell down the stairs the other day and busted my other ipod to the gamewerks near my house. the guy said he couldnt fix that ipod so he gave me a new one.. a better one a 32GB, the broken one was 8GB. but he told me the only bad thing is that the camera does not work and he doesnt know why... he just couldnt get it to workkk... any ideas on whats wrong?
Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.
If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order -
I used an ethernet cable and my lAN (wireless) to transfer my data PC (Vaio windows 7 64 bit) to Mac. Once I got the two computers connected and the number in both computers it started to run....for 6 hours and nothing more happened. Do you have another idea how to transfer data (200 gigs) ? or any idea how is the "secret way" to do that in the Mac store? "
Ok.. I found how
First I turned off the wireless in both computers, then I turned off the firewall in the PC
after I plugged the Ethernet cable in both computers
I found the IP address of the PC in; start run CMD at the promt I wrote IPconfig enter
In the MAC I went to go connect to a server
I wrote the IP address in the server
In the user I wrote the admin user of the PC with its password
Yahooo!... conected and I copy the 200 gigs in 2,5 hours
Med_ -
itunes store does not work on my ipod touch 5 after downloaing ios 7. does anyone know whay and has it happened to anyone else?
Try rebooting the ipod...
press and hold the home and power buttons until the Apple icon is displayed, then let go. -
accidentally removed from,sharing and permissions the admin user,and now i do not when i find the home icon at my computer i do not have permmission,and the mac does not works properly,lots of question mark at the dock ,please help
I'm going to assume that since you deleted your hard drive and all its files, you had a backup, yes? If the backup has an OS (bootable clone), then you can boot into it by holding down the option key when you start up you iMac and choose the backup drive. Then use Carbon Copy Cloner or Super Duper to copy the files back to your iMac.
-
IPOD model A1059 appears frozen and is unresponsive to all click wheel entries. Reset does not work. Does not show up in ITunes or in Windows Explorer. What is the problem and is there a fix?
If you are unable to reset the iPod (assuming the hold switch is not in the On position either), then you'll have to let the iPod's battery fully drain. Then connect it to a charger and leave it to charge for a couple of hours.
B-rock -
I did my 7.1.2 update via iTunes. Half way through it stopped working saying it does not detect my phone. Now my iPhone 5 is in recovery mode and hard resetting does not work for me. iTunes also will not detect my phone now
Thank you SO very much for posting this. I had the exact issue with my iPad Mini after the same upgrade. Hard reset failed, computer would not recognize iPad. I had read all the other instructions and nothing worked.... YOUR SOLUTION WORKED FOR ME - with a slight variation.
I followed your lead and connected my iPad Mini to another computer, fired up iTunes, it saw the iPad Mini in Restore Mode and allowed me to go into Restore (yes, it wiped all of the data but I have a back up on the other computer that would not see it after the failed update). It installed the latest iOS 7.1.2 as well. I then disconnected it from that computer, reconnected it to the computer that would not see it prior and it then saw it as a new iPad and allowed me to Restore my backup and now it's all good!
I detailed my steps only because you downloaded the previous version - 7.1.1 whereas I downloaded the latest version (7.1.2) and then restored my back up. -
Does anyone know how to unlock an ipod touch that says try again in 23,279,072 minutes?
My 4 year old somehow locked my old ipod touch and it says try again in over 23 million minutes. I have followed all the steps I can find so far and nothing works.
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
If you previously synced to the computer then you may be able to recover use of the iPod without erasing the iPod by following the instructions here:
Disabled Recovery-must use syncing computer. -
touch screen does not work on my ipod when playing music on itunes, but works fine on every other thing on ipod, can anyone help or what is the cause
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Brand new computer with Windows 8.1 will not sync to iPod Classic 120G. Windows does not recognize anything but iPod Touch? Is there a simple solution. Diagnostics have run and failed to point to a fix.
Might be worth tearing down the whole iTunes install and starting over...
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2 -
My WiFi is not working on my ipod touch third gen. The wifi option in setting is blanked out so i am unabole to select it. I have tried restored it and resetting network connections. Also the battery life is very low. How do i fix this????????????
If a restore did not fix it, you have a hardware issue--possible bad wi-fi radio.
Basic troubleshooting steps.
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD -
My Apple TV (2nd Gen) won't boot it'a a blinking fool, and Reset does not work... Is it time to by a new WD Live or is it just me? Thanks All..
If I mess this up ... sorry it my first time....I found this after posting here:
http://trick77.com/2011/02/04/apple-tv-2-with-white-led-flashing-blinking-fast/
It appears that this is due to firmware corruption and you can fix it by using the micro USB cable and hooking it to iTunes. I have not tried it yet but supposedly several people were able to resolve their problem this way. If you do try it, let me know. I don't have the cable at this time. -
RDP does not work after disabling TLS 1.0
RDP does not work after disabling TLS 1.0
Had to re-enable it .... what can i do to make it work with TLS 1.2 ??Hi,
Disabling TLS 1.0 will break RDP under default settings. Did the security scan say specifically to disable TLS 1.0? Normally you should be able to disable use of certain ciphers or prioritize ciphers. You may want to try IISCrypto, on
it you click the PCI button, then Apply button, then restart your server.
Additionally there are still a substantial number of web browsers in use that do not support TLS 1.1/1.2.
If you would like to continue with TLS 1.0 disabled you may change the RDP Security Layer. To do this please open Terminal Services Configuration (tsconfig.msc), double-click RDP-Tcp, change Security Layer to RDP Security Layer.
IMPORTANT: You are vulnerable to MITM attack when using RDP Security Layer because there is no Server Authentication. If you are running RDP over a VPN connection and there is no risk for interception then this may be okay. I recommend
you re-enable TLS 1.0 and have a ssl certificate from a public authority set on your RDP-Tcp listener.
Quoted from this thread answered
by TP, for more information you can go through that thread.
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
iTunes does not work om iPhone 5 after upgrade to iOs7. App store is available without problems. do somone have a tip?
Check Settings > General > Restrictions, and check out Contacts toward the bottom under the privacy restrictions.
That sounds like the probable cause you cannot add contacts.
Regarding the iCloud behavior, that sounds like it got huge (35,000) because of incorporating other contacts (from social media, perhaps). Also contacts sync has nothing to do with iCloud behavior. The whole idea of keeping your contacts in the cloud is that once you change them on one device, they change everywhere. Specific syncs are not relevant.
Maybe you are looking for
-
Unable to edit track info in iTunes on a Mac Air
Hello, I recently switched from a windows PC to a Mac Air. All my music was organizaed on an external hard drive. I have now imported the music in to my iTunes on my Mac Air. I am unable to edit individual track info when I use "Get Info". I tried to
-
Compatibility issue between your power management system and Windows 8.1
I have purchased a new Lenovo Ideapad S410 and have this problem. Compatibility issue between your power management system and Windows It also gives a message "Your PC ran into a problem and needs to restart. We're just collecting some
-
hey all, one of the older machines on my network is a power mac G4. it is having a problem waking up when it is asleep. i typically have to restart to "wake" it up. any ideas????? thomas
-
How do I convert Photo's from iPhoto 9.4 to 9.2
My main computer is an iMac running iPhoto 9.2. While on a trip I down loaded my photo's into my MacBook Pro running iPhoto 9.4. How do I convert the photo's so I can run them on 9.2?
-
WebDav using https fails with network name cannot be found.
When I attempt to connect to a Webdav server from a Windows 8.1 box it fails with System Error 67 has occurred. The network name cannot be found. I am using the net.exe USE command with the following syntax: net.exe use Z: https://dav.DomainYaya.com/