WebDav using https fails with network name cannot be found.

When I attempt to connect to a Webdav server from a Windows 8.1 box it fails with
System Error 67 has occurred.
The network name cannot be found.
I am using the net.exe USE command with the following syntax:
net.exe use Z: https://dav.DomainYaya.com/ <PASSWORD> /user:USERNAME
This exact syntax works for Windows 7.
I have more than one Windows 8.1 box where this fails.
There are various suggestions found all over the internet for various other situations. They do not apply or do not work.
For example, you will find an issue involving sending Basic authentication over http where there are suggestions about changing HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\WebClient\Parameters
That does not work. There is also discussion about the Webclient service. (it is running). One can find discussion of the redirector. (The SYS file is present and is installed with Windows 8+ anyway.)
Using HTTP only fails similarly but with error 53 (but I only did that as a test.) The issue is the HTTPS version.
I have BTW tried this with two different webdav servers.
Any help is appreciated.
Joe

Hi Joe,
Based on our research, the error 67 have the following several possable causes:
•IIS is not installed or is not running on the server that you are attempting to connect to.
•You have not installed the WebDAV Redirector on your client system.
•The WebClient service is not running on your client system.
•You have not enabled WebDAV on your web site.
•You are using Basic Authentication and connecting to your web site using HTTP instead of HTTPS.
•You are connecting to a web site on your local network that is using Fully-Qualified Domain Names (FQDNs) for name resolution, your web site uses Windows Authentication, and you have not added the web site's FQDN to the proxy server bypass list on your client.
For more information, please refer to the article as below:
Using the WebDAV Redirector
http://www.iis.net/learn/publish/using-webdav/using-the-webdav-redirector
According to the test, I am able to reproduce this issue in my lab. By default, the Webclient service is not running on windows 8.1 client. But for windows 7 client this service is running by default.
So please try to start the WebClient service on windows 8.1 client to check if it helps.
If you have any question, please don't hesitate to let us know.
Karen Hu
TechNet Community Support

Similar Messages

Install-CsDatabase Command Execution Failed: the network name cannot be found Lync 2013

Hi, I'm having problems when trying to create a new central management database on Lync 2013 to move the one from Lync 2010.
I'm executing this command:
Install-CsDatabase -CentralManagementDatabase -SQLServerFQDN <FQDN of your SQL Server> -SQLInstanceName <name of instance>
The user is member of RTCUniversalServerAdmins and is a SysAdmin on the SQL Server.
Any ideas are appreciated, thanks!
Eduardo Rojas

Hi, thanks for your response,
The server does respond to PING using the DNS name.
I turned on network discovery and verified I can telnet to the port that is using for SQL, however is not the normal 1433, is another port (1439) , so I don't know if that is needed to be specified when excecuting the command and how to do it because I haven't
been able to see a port switch on the Install-CsDatabase command.
I also specified the correct instance for Lync, is the same server I used to install Lync Server 2013.
when Excecuting the commando it starts generating a lot of information when trying to create the database, it's not like it just doesn't find the server and throws the error immediately.
One of the things it says before the error is:
Attaching database xds from data path \\server\c$\csdata\... and the path.
The operation failed because xds is DbState_NonExist.
Attaching database failed because one of the files not found. The database will be created.
State of database xds is DbState_DoesNotExist.
Creating database xds from scratch. Data file path = c:\csdata\centralmgmstore\... and the path.
Then the error is generated: The network name cannot be found.
Any other ideas on how to fix this?
Thanks.
Eduardo Rojas

"The home folder could not be created because the network name cannot be found" error in AD users and computers

Our home folders are stored on a non-windows NAS device and with Windows XP and 2003 we've always got the above error when creating or modifying users home folders, even when the shares were al ready created and being used.
However this was never really a big issue as the error that popped up was really for information and finshed with a "we've modified the user properties anyway, please create the share manually" type message.
Unfortunately now we are moving to windows 7 and 2008R2, this last part of the the message is missing and it won't accept the correct value.
This issue may be in the way that the NAS device shares the folder, as only the username that matches the folder name can access the share. This behaviour can't be modified.
Is there a way to get Windows 7/2008R2 AD users and computers to behave the same way that Windows XP/2003 does , i.e. don't try and create the share just set the value in the user properties ?
The AD is still at 2003 level and we can still use Windows XP/2003 clients to make the changes but this is a bit of a limitation.

The KB article is almost what we have apart from theitalic underlined
part
Consider the following scenario:
You use a domain administrator account to log on to a computer that is running Windows 7 or Windows Server 2008 R2.
You use the Active Directory Users and Computers Microsoft Management Console (MMC) snap-in to connect to a domain controller.
You open the Properties dialog box of a user account.
The user account has sole access to a shared folder path that cannot be accessed by the administrator account.
You set the Remote Desktop Services Home Folderattribute to the shared folder path.
NoteThis attribute is located on the
Remote Desktop Services Profiletab.
You click Apply or OK.
In this scenario, you receive the following error message:
The home folder could not be created because: The network name cannot be found.
Note If you click Apply or OK again, no error message is returned. However, the setting is not saved.
I think the important bit is
The user account has sole access to a shared folder path that cannot be accessed by the administrator account.
We manually create the shares on our NAS and then just want to enter the path in the profile tab, I suppose the question is how to we stop it trying to create the shares ?

BIOS Flash Utility Fails with "BIOS directory cannot be found"

I download the 32-bit BIOS update 6fuj35us.exe and ran through the ThinkPad BIOS Update Utility Setup Wizard. After I click Finish I accept the option to update my BIOS. It fails to start the flashing process, with the error popup: "BIOS directory cannot be found. The utility process cannot be completed." I tried the ISO image too, it burned and booted up correctly, but I got the exact same error message when I tried to run the flash.
Has anyone been able to get over this issue?
Thank you
Solved!
Go to Solution.

I had to send my machine back for a motherboard replacement. Fortunately, they turned it around quickly, two days, as quickly as the shipping allows.

WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.

I have two forests with a transitive on-way trust between them: PROD -> TEST (test trusts PROD). I had previously had kerberos authentication working with winrm from PROD to machines in TEST. I have verified the trust is healthy, I also verified users
in TEST can use WINRM with kerberos just fine. Users from PROD cannot connect via kerberos to machines in TEST with winrm.
I have verified the service has registered the appropriate SPNs. I ran dcdiag against all my PROD and TEST domain controllers and didn't find anything that would prevent kerberos from happening. I even tried disabling the firewall entirely on my TEST dcs
but that didn't gain me anything.
I've enabled kerberos logging but only see the expected errors such as it couldn't find a PROD SPN for the machine, which it shouldn't from what I understand, it should go to the TEST domain and find the SPN from there.
I'm really out of next steps before I call PSS and hope someone here has run into this and could provide me some next steps.
PowerShell Error:
Connecting to remote server failed with the following error message : WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
-For more information about WinRM configuration, run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo : OpenError: (:) [], PSRemotingTransportException
+ FullyQualifiedErrorId : PSSessionStateBroken
winrs Error:
Winrs error:
WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
-For more information about WinRM configuration, run the following command: winrm help config.

Hi Adam,
I'm a little unclear about which SPNs you were looking for, in which case could you confirm you were checking that on the computer object belonging to the actual destination host it has the following SPNs registered?
WSMAN/<NetBIOS name>
WSMAN/<FQDN>
If you were actually trying to use WinRM to connect to the remote forest's domain controllers, then what you said makes sense, but I was caught between assuming this was the case or you meant another member server in that remote forest.
Also, from the client trying to connect to this remote server, are you able to telnet to port 5985? (If you've used something other than the default, try that port)
If you can't, then you've got something else like a firewall (be that the Windows firewall on the destination or a hardware firewall somewhere in between) blocking you at the port level, or the listener on the remote box just isn't working as expected. I
just replied to your other winrm post with steps for checking the latter, so I won't repeat myself here.
If you can telnet to it and the SPNs exist, then you might be up against something called selective authentication which has to do with how the trust was defined. You can have a read of
this to learn a bit more about selective trusts and whether or not it's affecting you.
Cheers,
Lain

The verification of (SAML) signature used to fail with NullPointerException

I'm not sure,
How to use this information to fix our problem
CR325776,CR301621,CR331147
Description:
When SAML assertion was used to sign a message, the verification of signature used to fail with NullPointerException.
This problem has been resolved.
found in: 9.2 MP1 fixed in: 9.2 MP3
from this page:
http://download.oracle.com/docs/cd/E13222_01/wls/docs92//issues/known_resolved.html
I tried to download this patch, but not able to figure out where I can get this and how to install.
Thanks
Edited by: user543518 on Apr 16, 2010 2:36 PM

we got the update and this has been resolved as we have installed weblogic 10.

Creating a view on KONA & KONH - Failed with 'Field name DATAB not unique'

Hi all,
    I am creating a view on KONA (Rebate Agreement) & KONH (Conditions Header) tables. The link is KONA-KNUMA = KONH-KNUMA_AG.
   The field 'DATAB' exists in both tables and I have included those two fields under 'View Fields' . When I tried to activate the View, it fails with 'Field name DATAB not unique'.
   The following is the complete error message:
Message no. MC060
Diagnosis
When you define aggregates (views, lock objects or matchcode objects), you can assign the aggregate fields your own names (the system assigns names to the basic fields automatically). These names must be unique.
System response
The system has established that the names assigned to the aggregate fields in an aggregate definition are not unique and issues an error message.
Procedure
Assign unique names to the aggregate fields in question.
   Why I am not able to create the view after including a field that EXISTS in two tables, PLEASE ?
Thanks,
Venkat.

Hi,
you can include both fields (but what for??); most likely KNUMH will also complain after fixing DATAB (just a guess...).
You can include both fields if you name them differently (different aliases):
In the view fields tab, enter two different names in the column "view field".
this will work.
hope this helps...
Olivier.
Message was edited by:
        Olivier Cora

Error code 0x80070035 on drive maps in GPO, "Network path cannot be found".

I am trying to apply a GPO that maps drives so that another GPO can then make them available offline for a couple of hundred users.
Every time I try to apply the policy it fails with an 0x80070035 error which translates as a "Network Path cannot be found". The security settings for that particular folder is fine and the user can see it ok, furthermore following logon I can
manually map the drive through windows explorer and through CMD/powershell using the net use command.
The path i tried was \\servername\otherdir\securearea\ which didnt work (i did drop and add the final "\" just in case i was going mad)
i then tried \\servername\otherdir\unsecurearea\ which
still failed
just to prove my lack of sanity i created a folder on the hard drive of the laptop itself, made it a shared folder and tried both \\localhost\sharedfolder and \\127.0.0.1\sharedfolder,
they all fail with the same error code.
i have checked the hosts and the lmhosts files are there is nothing new in there, only the usual MS gumf that has come with every copy on windows since Win95
patience is wearing thin, hair is getting short ...
thoughts anyone?
Nothing is unfixable - with a suitable sized hammer!

Hi klimacher,
Would you please let me know the current situation of this issue? Have you referred to Kelly's suggestion and solved this issue?
Based on your description, I understand that you configure Drive Maps via GPP. However, can’t apply the policy
with error code 0x80070035. If anything I misunderstand, please don’t hesitate to let me know.
If so, you should find Event 4098 as below shows.
When you type the location of this mapped drive, please remove trailing slash on the UNC path. Then apply the
setting and run gpupdate command to update group policy setting. Please monitor the result.
In addition, please refer to the following article and troubleshoot this issue.
Troubleshooting
the Drive Maps Preference Extension in Group Policy: Adding a Share Name with Trailing Slash '\' Returns Error Code 0x80070035
If this issue still exists, please let me know summarily how you configure the Drive Maps. For an example,
where the GPO link? Did link to user OU? Any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu

Your Digital Id Name Cannot Be Found By The Underlying Security

Hi All,
I found many links to this error message, but none of them helped.
I created a self signed certificate for testing e-mail signing and encryption. I was able to sign and send an encrypted email. But when I try to open an encrypted email I get the message "Cannot open this item. Your Digital ID name cannot be found by
the underlying security system". I have the certificate under the address book of Outlook 2010.
Is there anything wrong with the certificate or I'm missing anything?
Regards,
Madhukar

Hi Madhukar,
The error "Your digital ID name could not be found by the underlying security system." is typically caused by one of the following reasons:
The sender of an encrypted message uses a Public Key for the recipient that is not installed on the recipient's computer (such as an expired Digital ID).
Your digital certificate is damaged or corrupted.
Please take a look at this KB article and see if it helps:
http://support.microsoft.com/kb/258527
(Note, although the link applies to an earlier version of Outlook, the same concept holds good for Outlook 2010 as well. )
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Outlook 2013 Exchange 2013 Address Book Error 0x8004010F : The operation failed. An object cannot be found.

Hi,
We have Exchange 2013 running in our network, and are using Outlook 2013 on all PCs. We added some users several weeks ago, and they are not showing up in the Address Book. When we try to download the Address Book in Outlook, we receive the error 0x8004010F
: The operation failed. An object cannot be found.
Please let me know how I can start to troubleshoot this.
Regards,
Chris

Hi
There is a multiple reason to receive an error 0x8004010f, it is just a generic MAPI error.
Let’s check all settings are configured the way it is supposed to be: -
1.   Make sure the authentication setting is set up properly by using this command: -
Get-OabVirtualDirectory -ADPropertiesOnly | ft Identity, *Auth* -AutoSize
2.   Check URL’S are configured properly: -
Get-OabVirtualDirectory -ADPropertiesOnly | ft Identity, *url* -AutoSize
3.   Check the location of OAB: -
C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\OAB
4.   Now find out the location of the database on which the Arbitration mailbox resides: -
Get-Mailbox -Arbitration | where {$_.PersistedCapabilities -like “*OAB*”} | ft Name, Servername, Database
Get-MailboxDatabaseCopyStatus MGUxxx
5.   It is also important to ensure all database has the OAB set up properly for this use CMDLET: -
Get-MailboxDatabase | Ft Name, *book*
6.   If one or more database does not have OAB setup, then use CMDLET to set OAB for it: -
Get-Mailboxdatabase | Set-MailboxDatabase -OfflineAddressBook “Default Offline Address Book”
7.   If the issue is affecting only one or specific set of users, then check they have an OAB specified on their account: -
Get-Mailbox abc.xyz | fl Name, OfflineAddressBook,Database
Please correct me if the information that I am having is wrong.
Reply awaited.
Thanks and regards
Ashish@S
Ashish@V

Ver.9.5 The volume for file name cannot be found

HI,
My work Mac Book pro was recently upgraded to Mavericks from 10.6.8, with iPhoto 11 (ver. 9.5) also an included upgrade. One album of photos is no longer accesible - clicking on each thumbnail provokes the following window "The volume for <file name> cannot be found. The "Try again" option doesn't work, and the alternative, which is to use the finder to locate the file is useless, as the files are buried in a library spare bundle. When I copy the file name, and search on the volume with the library via finder, it pulls up tiny thumbnail size files.
I have a primary iphoto library on a dedicated USB external drive, which I back up not everytime I update the library (200 gbs spare bundle over USB2!), but regularly. I fear these recently imported files, have not been backed up before up erasing cards, and upgrading system OS, have gone.
Is there any way of getting into the library via finder, or elsewhere in iphoto to refind the original master files which are in there somewhere? These files opened perfectly in iphoto before the recent upgrade.

Thanks for the fast response. I've followed your directions and can't find the file in there, in Masters, Originals, or Modified folders. I found files in Thumbnails folder though. Some of the files from the same event are fine, so its not consistent. I'm also noticing that another file in the event has a totally blurred preview (Its a 24mbs Jpg from a Nikon D800) - not sure if this is at all connected.
The positive news is that my NeoFinder database of drives indicates I should have the 'missing' files on another computer in the office, but I'm still scratching my head on this.

" the volume for (file name) cannot be found. Insert the disk or connect to the server volume and wait for it to appear on the desktop, then try again."

I get an error message in iPhoto when I click on thumbnails of pictures in certain albums. It reads 'the volume for "(file name)" cannot be found. Insert the disk or connect to the server volume and wait for it to appear on the desktop, then try again.' What does this mean and how do I fix it?

It means that you imported the files in Referenced mode and have now remvoed them from the Mac. Put the disk or card back.
For more on iPhoto and file management see this User Tip:
https://discussions.apple.com/docs/DOC-6361

The specified resource name cannot be found in the image file.

Dear Experts,
I have developed an import too and it imports many of the Business Objects from a temporary data base to SAP B1. It was running fine for more than 6 months now.
Currently when the Tool is importing Credit Notes in to SAP B1, the following error is thrown.
The specified resource name cannot be found in the image file.
And I have no Clue about the error. Any one had any experience regarding the above error???
Thanks in Advance,
Vasu Natari.

Hello VAsu,
Somethimes this unexpected, ununderstandable eroor messages caused by corrupted observer dll.
Do a clean up (delete %TEMP%SM_OBS_DLL) folder, and see the result ! (i had several issues in the past with some strange messages...)
Regards
János

No event method with matching name and signature found on EventSet

Dear,
I have this error in the Problems view in Workshop (I'm using the Weblogic 9.2.1) :
No event method with matching name and signature found on EventSet: com.bea.control.TaskControl.Callback.
This error occurs sometimes when I put an event on a task in a process definition. Example, I have a process : Application.java, when I put the onReceptionCompleted control (receive) in my process, the error appears!
Thanks for your help,
Regards,
Mathieu

It is a problem with the drap & drop in Workshop (from the taskControl to the Process). Workshop automatically inserts a wrong eventSet instead of the good one from the generated task control !
See you,
Mathieu

"no type with this name could be found at this location" error..

Though my project has been successfully compiled.
But when I open some specific class, it always comes out some error, says "ERROR: no type with this name could be found at this location". I am not quite clear, because the class underlined is absolutely in the project source folder. :(
Can anybody tell me what wrong with it?:(

Hi Tom
There is a known limitation with Workshop where you would see those errors when the java classes (the types that error out) are part of you webproject itself.
The classes get compiled and get moved into web-inf\classes folder and somehow IDE does not get to see this in its classpath.
The workaround is to move those classes into a java project which will get compiled into a jar file that will be part of libraries (goes into APP-INF\lib).
You should not see those errors after the workaround.
This is a known limitation addressed via CR277571
Thanks
Vimala

WebDav using https fails with network name cannot be found.

Similar Messages

Maybe you are looking for