HT1476 Since I have updated to the new version, iOS 7, I have noticed the battery does last long as it was in iOs 6. Some friends have the same problem May I know the reason?
Since I have updated to the new version, iOS 7, I have noticed the battery does last long as it was in iOs 6. I have already updateed to 7.0.2 the latest version. Some friends have the same problem May I know the reason?
You need to update iTunes to 11.1 on your PC
Similar Messages
-
Hi, I bought "photoshop elements 12" 8 September . Yesterday I noticed that a new version of number 13 Can I ask for free adobe I have updated to a newer version? I have heard that I have the right to do within 30 days of purchase. Do I have to first register your product? greet.
You can apply for an upgrade here: Do I qualify for a free upgrade?
-
I updated to a newer version of iTunes and now my ipod touch does not show up as a device in iTunes. There is no 'Devices" category on the bar at the left
Refer to this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538 -
It could be a coincidence but when I upgraded to the latest version of Adobe Flash Player 11.3.300.262 I can't seem to play any games on Yahoo Messenger with my friends. I know when I updated for some reason I had to try 3 times before it took it. It shows it's updated. I'm wondering if I have to un-install and re-install it. Also, I never use Internet Explorer 8 but when I went in there to check I found a plug in check link there and it showed over there that Adobe Flash Player needed updating but it was an older version and not the one Foxfire had me update too. Now I'm really confused if this is causing a problem. I have never had to check Internet Explorer for plug ins before. Have always just updated in Foxfire since that's what I use. The Adobe Flash Player seems to play videos okay so not really sure if that's the issue or not. My Java plug-ins have been fine and have been updated awhile ago, so I know it's not that. Any help is appreciated. Thanks!
Well, after hours of trying to figure it out I gave up and un-installed and re-installed that last verion of Adobe Flash Player and now it seems I can play games again in Messenger. Everything else had been fine just that. I can only figure it was because it was having a hard time updating the first time and took me 3 tries. So even though it said it was installed, apparently it wasn't done correctly.
Though when I couldn't figure out what was wrong at first I looked and checked to see all the things were enabled that were supposed to be and they were.
I even tried to go to the Adobe site and download the last version I had and couldn't find it. Kept coming up with the new version. Others said if you download a particular older version it may not have all the security features in it.
This really gets to be a bit much, especially when you're by yourself and have only a smattering of knowledge of technical things.
Thanks fore responding to my question.
DFelice -
FCP 10.2 on my iMac and MBA are crashing on launch
I had the same crash type as Pajero Fan and Kidago, except my machine is a iMac mid-2011 12GB RAM, AMD Radeon 6770M, Yosemite 10.10.3 fresh install and FCP 10.2. My crash was very similar to the AMDRadeon but mine is with the AMDRadeonX3000GLDriver.bundle.
Crashed Thread: 4 Dispatch queue: NSOperationQueue 0x600000c26840 :: NSOperation 0x600000a593e0 (QOS: USER_INITIATED)
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000196aa1003
VM Regions Near 0x196aa1003:
Image IO 0000000196a9e000-0000000196aa1000 [ 12K] rw-/rwx SM=PRV
-->
__TEXT 0000123480000000-000012348029b000 [ 2668K] r-x/rwx SM=COW /System/Library/Extensions/AMDRadeonX3000GLDriver.bundle/Contents/MacOS/AMDRade onX3000GLDriver
I created a new user account, and FCP 10.2 launched and works fine. However, using 3D Text gives an FCP warning that my hardware is not capable of doing 3D text.
Back as my original user account, I did a Repair permissions and found a TON of group/user issues such as,
User differs on “System/Library/Extensions/AMDRadeonX3000GLDriver.bundle/Contents/PkgInfo”; should be 0; user is 502.
Group differs on “System/Library/Extensions/AMDRadeonX3000GLDriver.bundle/Contents/PkgInfo”; should be 0; group is 20.
(BTW, user 502 is the UNIX name for the new user account I created.)
That DIDN'T fix it.
Using Find Any File I was able to delete the "Layouts" folder, and FCP launches ok, but any attempt to start a new project, import a file, results in a crash. Maybe related to the 3D text feature. -
a update version of firefox came up.. tellingme to update to new version of firefox. So I did.. it loaded the current version. I always have my 'history' showing. (in the VIEW title on top of screen I go to SIDEBAR, and have history showing. It is on the lest side of screen at all times. I have so many sites and all my research there.. when I updated in was gone.. I need it back.. PLEASE HELP ME... ANYBODY....
I'm sorry you're having problems with FF 4! Please see the following thread for information on how to downgrade:
[http://support.mozilla.com/bs/questions/797708 Thread 797708]
Hope this helps! -
The 2.1.3 Software update won't work, the new version of iTunes won't download. Please help.
For several months now I have not been able to find a solution to either of these two problems. When I have the Apple Software Update program open and I click update, it loads for a second and then goes back to the usual page saying to update. It will not update. I have also tried, multiple times, to install the new current version of iTunes and that won't work either. I've tried to repair iTunes by going to Control Panel > Programs > Repair and it still won't work. Please help because I'm trying to download a new app but it requires the new version of iTunes. I am using a Windows Vista and I'm this is for my 4th generation iPod touch.
Did you try simply downloading the latest version of iTunes using the link below and then installing it on top of the older version?
http://www.apple.com/itunes/download/
B-rock -
HT4623 when i update the new version then i try to turn back on but my phone didn't work
i was update the new version for my iphone 5 when it done, i cant turn back on
Hey saandyy,
Thanks for using Apple Support Communities.
You can try to restart the iPhone to exit recovery mode.
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/HT1430
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Recovery mode erases your device and restores it, which should resolve the issue. If you previously synced with iTunes or iCloud, you may be able to restore from your backup after recovery.
Have a nice day,
Mario -
I have to downlaod the new version of itunes. It tells me that my ipod wont work with the old version. If i download the new version can i transfer all my songs to the new version or will they not be able to?
As long as its the same computer, the new version should simply upgrade your old version with nothing else changed.
-
sinds i upgrade firefox to the new version 4, fire FTP it's not working. i cannot open it. and i need it badly to work everyday. so i would like to know how to make it work in this new version. what do i do? how i can open it?
Which version of Fire FTP do you have installed? <br />
Version 1.99.# is needed for Firefox 4.0+ <br />
https://addons.mozilla.org/en-US/firefox/addon/fireftp/versions/ -
I have tried over and over again add the new version of software to my ipad. it will not load it. My phone loaded IOs 5.1 and has Cloud. but the Ipad will not. I need help.? could it be something in my settings?
Without anything more than your blanket statement that the software will not load, it is difficult to suggest anything more than the standard boilerplate stuff. Does the update start at all? Is the iPad being recognized in iTunes?
Try temporarily disabling your firewall and anti virus software and then try to download and install the update. -
With the new version of itunes how do i transfer music purchased on my ipad to my pc?
with the new version of itunes i do i transfer content purchased on my ipad directly to my pc? i've synched successfully however i want to upgrade the os and i am receiving an error that says i have content not yet transfered. The archived questions on this are not referencing the new version of itunes. thanks...
Missing "how" in the first sentence...
-
About the new version of Pages in Maverick
With the new version of Pages, in Maverick, I don't find any longer the option that allowed visualization of two pages of one file on screen. Does anybody know how to do or was that option disabled?
List of changes to Pages 5
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&mforum=iworktipsn trick
Peter -
Why doesnt my itouch 2.2.1 update to a newer version? Barely any apps work on it
why doesnt my itouch 2.2.1 update to a newer version? Barely any apps work on it.
This is a first generation iPod Touch? If so, you have to purchase iOS 3.1 through the Apple Store - there are no further free updates for that device.
http://support.apple.com/kb/HT2052 -
I have 3 iTunes libraries on my one one computer and since I updated to the new version I can no longer see who's library I am in. It used to show at the top of iTunes the name of the library I was in. Is there a way I can tell which library I am in without closing and reopening?
No. Frequently the apps take up more storage space on the iPod that the file download size.
Maybe you are looking for
-
What happens to client session when host goes down?
I have a windows 2012 R2 RDP environment. 1 Broker and 3 Session Host Servers. My question is as follows: User connects via broker to one of the Host servers. Host server goes down, while user is still connected. Session is written in Broker database
-
How to import ratings from C1 6 to LR5
I prefer to tether using C1 (version 6.4.2) and clients etc like to look at images on set and make selects, but when I'm back in the studio, I prefer using LR 5 for cataloging etc. How can I import those ratings from my C1 session to LR once back at
-
My ipad2 can't open a program in the explorer. It says that I need to download windows explorer 6 or higher. It opens other programs. How do I download windows explorer 6 or higher?
-
HI, I'm wondering if anyone can tell me how to get rid of the file name and the time on the top of the document please? Thanks!
-
Need to get a spry menu to work on every page with Server Side Includes
I've created such a menu and have pasted the code into its own PHP file and then added the include but it just comes out as a blob of code and links. Any tips on how to do this? Thanks.