HT4628 I can not use the internal wireless card with my Mac pro 2012, I don't know if it is broken

I can not use the internal wireless card with my Mac pro 2012, I don't know if it is broken. The problem is happen recently, I have to use an independent wireless card now. Thanks!

When you enable Internet Sharing in OS X, you are creating a separate sub-net.
There is no option to allow this to be a simple pass-through from Ethernet to AirPort (or the other way).
The problem is easily solved by getting an inexpensive wireless router. You can replace your current router OR disable the DHCP server on the wireless router and allow the wireless clients to get an IP address from the current router.

Similar Messages

  • Can I use the internal airport card of my Mac as a BRIDGE?

    * My Mac is part of my home network.
    * My wired Router provides NAT addressing for all wired computers and printers.
    Question:
    Can I use the internal airport card of my Mac as a BRIDGE?
    I am able to create a second LAN where the internal airport card, creates it's own network, but then the wireless computers are not on the same network as the wired.
    If using an Airport Express, there is an option you can uncheck "assign IP address" that turns it into a bridge.... Is there anything similar with os X 10.4.3

    answered in another thread

  • Can I use a Asus Nvidia gt640 with a mac pro 2006?

    Just got my first intel mac! Not the newest thing but it will do. I just have a quick question, can I use the Nvidia gt640 2gb with a Mac pro 2006 with no flashing of the system or the card. Thank's. -Edward

    First, you need to look at what OS version you have.  Mnay people (myself included) running some of the newer OS version are using Nvidia cards not released for the Mac.  OS X Mavericks for example will support these cards, but you lose some functionaility (boot screen, etc.)  Once the machine is up and running they work fine.
    With a 2006 model you are before the 3.1 machines and therefore limited in the OSX version you can run.  I think you need at least 10.7 Lion.
    So if you can run 10.7 the answer is probably, but then you will lose some basic functionality.  For many this is not important.

  • HT2801 Can I use the MacBook Air superdrive with my MacBook Pro?

    Can I use the MacBook Air superdrive with another Mac, such as a MacBook Pro?

    No, it only works with the MBair and the Mac Mini.

  • Using the internal sound card with good optical A/D converters?

    Dear Logic users, I have two questions:
    1) I was wondering if the internal sound card of my MacBook is of such quality that I can achieve good results if I bought a good A/D converter with a digital output to plug directly into the optical line in of the MacBook? E.g. the Samson C-valve http://www.samsontech.com/products/productpage.cfm?prodID=1651&brandID=2 along with the M-Audio Co2 http://www.m-audio.com/products/en_us/CO2-main.html to convert the coaxial S/PDIF to optical? (Same procedure for the line out signal, with a D/A converter of course.) Or is the internal sound card of such inferior quality that I should stick with my current MBox 2 Pro? My initial thought was that if the signal is kept within the digital realm, it is really the A/D converters that determine the sound quality, and that the internal sound card of my MacBook does little less than calculate the digital signal. Maybe someone with a more intimate knowledge of how the internal sound card works with digital I/O could chime in?
    2) If the above mentioned approach would be feasible, suggestions of other A/D and D/A converters would be most welcome.
    The reason for this is to be free from the driver issues that sometimes occur with external hardware, especially with software/OS upgrades.

    If you are recording Midi using loops and all it wont make a difference in having a AD/ converter. as everything you are doing is in the box.
    However if you want to get a Analogue signal into the computer then its a different case, and I'm not talking about using Optical from a keyboard, and even if i was you would need to have a converter anyway,
    even though i am talking about Recording Vocals or Live instrument!
    This is where the Converters come into play, be aware Converter and sound-cards are two different source of hardware,
    anyway Back to Converters on live vocals this is where the AD comes into play,
    transferring Analogue Signal into Digital,
    and also getting used to the sound of the converts, or even liking the the sound of the converters/soundcard which is always going to be subjective and which also shares a relation with Near-field monitors,
    you change your monitors and it seems as if your sound changes that is how tight the relation is between the two.
    Fr.BlayZay.

  • Hello, can i use the new magsafe connector on a mac pro from 2008?

    Hello, I have a mac pro 15' from 2008, and the connector just stop working, in fact I have 2 connectors, because I broke a mac pro brand new, and then I had to buy this one, so both connectors stop working all of a sudden, and now when I went to Apple Store, the anwwer I got was "is not possible to repair" and we don't have to deliver before 4 months. I am atonished! 4 months?? How is that possible, and they show to me in Apple online the answer and it say 4 months indeed. Now I am looking to the new magsafe connector, that was made to the new mac pro and the deliver is the next day. My question is
    can I use this one on my mac pro from 2008? Because i reada few things that there were complains that the new did not work. Can i get some help one this please?

    4cpukid wrote:
    Guys we have a legit question here about a power cord and you guys are going back and forth here. If you guys want to ccontinue can you please just give each other your emails.
    ANYWAY - What I know of the magsafe cord is s different sized port.
    All magsafe plugs fit in all magsafe sockets, no exception. Your only concern is that the power output of the supply be equal to or greater than the computer into which it is plugged.

  • HT201178 Is it possible to use an Apple wireless keyboard with a MacBook Pro? Sounds odd, I know, but I much prefer typing on a wireless keyboard.

    With a MacBook Pro..is it possible to use an Apple wireless keyboard instead of the keyboard built into the MacBook Pro? I much prefer typing on the wireless keyboard. Thanks

    Hello:
    If the Macbook Pro has Bluetooth built-in, the answer is yes.
    Barry

  • Why I can not use the pinch open & close function on Mac in this new firefox

    The track pad function pinch open and lose .

    Recently both the Yahoo! Toolbar extension and the Babylon extension have been reported to cause an issue like that. Disable or uninstall those add-ons.
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Can I use the pci-6259 card with SCXI?

    I need to know if the new M style daq cards will still work with the SCXI devices. If so, is there any additional hardware ie. cable adapters that I need?

    Craig,
    M-Series devices should work just fine with SCXI. You will need a new cable, as the connectors on M-Series devices are different from those on E-Series devices. I believe the following cable should work just fine for your application: SHC68-68-EP.
    Dan

  • I cannot use the FS-4000DN printer with my mac pro.  What driver do I need?

    I have a refurbished Mac Book Pro with OS X 10.8.5 and cannot find a driver for the Ecosys FS-4000DN Printer.  Says my mac book is incompatible.  I realize this may not be a mac problem but one with the printer co.  Any ideas?

    Have you tried with GutenPrint and see if that can drive the printer?

  • In my numeric key pad I can not use the (.) dot because it has a (,) and it is not working in calculations.  What I can do?

    In my numeric key pad I can not use the decimal dot (.) because it has a (,) and this not work with decimal calculations.  What I can do?  Help ………

    IT NOT WORK IN MEXICO.  THANKS A LOT.  BEST REGARDS.  MANUEL LOPEZ
    El 6/2/2015, a las 16:50, Apple Support Communities Updates <[email protected]> escribió:
    You received a reply
    SGIII has replied to your question. You can view the full discussion in Apple Support Communities.
    In my numeric key pad I can not use the (.) dot because it has a (,) and it is not working in calculations.  What I can do?
    Correct Answer Helpful Answer
    Use the buttons above to tell SGIII and the rest of the community if this reply solved your question or helped you get closer to finding a solution.
    To reply to SGIII, go to the discussion in Apple Support Communities.
    You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.
    TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM. Cupertino, CA 95014.
    All Rights Reserved | Privacy Policy | Terms of Use | Apple Support

  • TS3988 My icloud account is not verifying it says check my mail witch I have done and I get a message say your iPhone for has been used to set up and Icloud account but still can not use the icloud can anybody help me.

    My icloud account is not verifying it says check my mail witch I have done and I get a message say your iPhone for has been used to set up and Icloud account but still can not use the icloud can anybody help me.

    Be sure you are checking the email account that you used to set up the Apple ID you used to create the iCloud account.  Also, be sure to check your spam/junk folder as well as your inbox.  The email you should receive looks like the image below.  When you get it, click the Verify Now link.
    If it still isn't there, try going to https://appleid.apple.com, click Manage your Apple ID, sign in, click on Name, ID and Email addresses on the left, then to the right look for a link to resend the verification email.

  • Good evening, my name is Ludmila I have a problem. im buy second hand iphone 5 but I can not use the screen shows asking me apple id but I do not know this is my first iphone I do not know what the police thought it was stolen or lost but I you can help m

    Good evening, my name is Ludmila I have a problem. im buy second hand iphone 5 but I can not use the screen shows asking me apple id but I do not know this is my first iphone I do not know what the police thought it was stolen or lost but I you can help me. Someone told me we should stop function Find my iphone but how?? email does not even know the first lord. It cost me 400 euros but may not use iphone. someone laugh at me because I deceived. Please help me tell me his email talk to you should stop off iCloud or ID

    Scuzati de engleza google translate

  • HT203175 I have no problem signing on to iTunes my issue is once on the site I can not use the "search". It says there is a runtime error R6025 pure virtual function call. Has anyone had this problem and how do I fix it. Thanks

    I do not have a problem getting in the iTunes stores. My issue is once on the site I can not use the "search". It says there is a pure virtual function call R6025. How can I solve this problem? Do I have to create a new account? Do I have to uninstall and re-install? Thanks

    Thanks so much for your feedback. I really appreciate any input here.
    If someone from Adobe could GUARANTEE that this problem would go away if I
    purchased CS4, I would pony up the cash and do it. However, I'm skeptical
    about that because I just saw someone else post a message on the forum today
    who is running CS4 and getting the exact same runtime error as me.
    I'll try un-installing and re-installing as Admin, and if that doesn't work,
    maybe I can find a used copy of CS3.
    In the meantime, I'm also wondering if a Photoshop file can carry any sort
    of corrupt metadata inside it once it has errored out? Reason I ask is, I
    had to port all of my old PSD files to the new computer, and I only seem to
    be getting this error when I attempt to work on one of the files that
    previously got the runtime error when they were sitting on my XP machine.
    When I create new files from scratch on this new computer, they seem to be
    working just fine (at least, for now).
    If so, I would probably be smart to never open those troublesome
    "errored-out" files again.

  • ? What can i do about this, i will have cancel this if i can not use the programs

    good evening i have just purchased lightroom and photoshop on a 12 months contract and its now saying i am running a operative system that photoshop no longer supports  ? What can i do about this, i will have cancel this if i can not use the programs

    unless that message is erroneous, you'll need to upgrade your os to use whatever you dl'd.
    with a cc subscription, you can use cs6, cc and cc 2014.
    if you need more help, what os do you have?

Maybe you are looking for

  • Loading QT problem?

    When I bought my Mac i updated with Snow Leopard. Could not open QT by clicking so tried downloading QT program. Every time i get to the point of deciding where to store program it tells me I can't because it already exists. Getting frustrated, what

  • CS5 Production Premium causing problems with CS4 Production Premium

    I have been using CS5 Production Premium alongside CS4 Production Premium for a while now.  After Effects, PhotoShop & Illustrator work alright together (both CS4 & CS5 versions).  My job actually necessitates me keeping both versions on my machine.

  • ABAP Query's

    Hi every one.                   Can we Change a standard abap query by copying into Z program,If it is possible , How it will effect that query.And how to test that.

  • I can't update my iPod touch past version 4.3.5  (8L1)

    I have an iPod touch using version 4.3.5 (8L1) which needs to be updated to be able to support the apps I want. When I go to setting and then general; there is no option for software update, or any update. I also havnt been able to find it on iTunes

  • Exception in thread "main" java.lang.InternalError:

    Hi all, i'm installing 11.5.10.2 on RHEL 4, after running $cd /u01/Stage11i/startCD/Disk1/rapidwiz $./rapidwiz i get the following error [applmgr@eureka rapidwiz]$ Exception in thread "main" java.lang.InternalError: Can't connect to X11 window server