I canu00B4t run various records with BAPI_NETWORK_COMP_CHANGE

If I run the BAPI with several component to update the field WITHDRAWN, the records are not updated.
Now if I run one compomente updating the data correctly.

Hello
You need to fill structures for all components.
Like this:
BAPI_NETWORK_COMP_CHANGE-COMPONENT = " <- set number here (let it be '000000000000001')
BAPI_NETWORK_COMP_CHANGE-WITHDRAWN = 'X'. " <- set value here
APPEND BAPI_NETWORK_COMP_CHANGE.
BAPI_NETWORK_COMP_CHANGE-COMPONENT = " <- set other number here (let it be '000000000000002')
BAPI_NETWORK_COMP_CHANGE-WITHDRAWN = 'X'. " <- set value here
APPEND BAPI_NETWORK_COMP_CHANGE.
BAPI_NETWORK_COMP_CNG_UPD-COMPONENT = " <- set number here ('000000000000001')
BAPI_NETWORK_COMP_CNG_UPD-WITHDRAWN = 'X'. " <- set value here
APPEND BAPI_NETWORK_COMP_CNG_UPD.
BAPI_NETWORK_COMP_CNG_UPD-COMPONENT = " <- set other number here ('000000000000002')
BAPI_NETWORK_COMP_CNG_UPD-WITHDRAWN = 'X'. " <- set value here
APPEND BAPI_NETWORK_COMP_CNG_UPD.
CALL BAPI .......

Similar Messages

Running JRA recording with Weblogic running as a service

Is it possible to run JRA recording while running the WebLogic application server as a service?
The spec for our environment is as follows:
- JRockit JVM version: JRRT 3.1.0 1.4.2
- Weblogic version: 8.1 SP6
- OS: Windows XP SP3
Ideally, we would like to be able to run JRA recording every hour as an automated process, however as there is no java.exe process to attach to it seems this might not be a possibility? I appreciate is certainly possible to run the application as a console application and attach to the PID of a running java process using JRCMD if WebLogic is not running as a service. Are there any solutions for taking JRA recordings when JRockit is running in a Weblogic Service?

Tim,
You can try to run beasvc.exe in debug mode, from a command prompt after the
server is booted. You can run it by: >beasvc -debug ...
This will simulate the service being started in the foreground so that you can
see output messages. You may be trying to run beasvc in a way that is not
intended. If you continue to have issues, you should open a case with BEA
Support.
Regards,
Glenn
Developer Relations Engineer
BEA Support
Tim Isenhart wrote:
I want to collect performance data from weblogic running as a service. I
customized the commandline in the installSvc script and inserted a profiler
class in front of weblogic.Server.
When i start the service, beasvc crashes.
How can i work around this without resorting to running a manual script ?
Thx,
Tim

Bootcamp Wx64 will not run various games on steam? Early 2013 Macbook Pro with Retina

Various errors with the video card have popped up, these errors varying game to game... Some games do run (Sim city 4 deluxe) however most games (Dead space 2, Warframe, Oblivion, Just cause 2, Nation Red) Will not run, displaying their various errors generally pertaining to my video card.
Early 2013 Macbook Pro with Retina... Basically speced out everything at max except hard drive (512 instead of 700gb)
2.7GHz quad-core ($2799 model)
Intel Core i7 processor (Turbo Boost up to 3.7GHz) with 6MB shared L3 cache
Configurable to 2.8GHz quad-core Intel Core i7 (Turbo Boost up to 3.8GHz) with 8MB shared L3 cache. (I configured to 2.8 with turbo)
Video Card/Graphics:
Intel HD Graphics 4000
NVIDIA GeForce GT 650M with 1GB of GDDR5 memory and automatic graphics switching
Dual display and video mirroring:
Simultaneously supports full native resolution on the built-in display and up to 2560 by 1600 pixels on up to two external displays, at millions of colors

Various errors with the video card have popped up, these errors varying game to game... Some games do run (Sim city 4 deluxe) however most games (Dead space 2, Warframe, Oblivion, Just cause 2, Nation Red) Will not run, displaying their various errors generally pertaining to my video card.
Early 2013 Macbook Pro with Retina... Basically speced out everything at max except hard drive (512 instead of 700gb)
2.7GHz quad-core ($2799 model)
Intel Core i7 processor (Turbo Boost up to 3.7GHz) with 6MB shared L3 cache
Configurable to 2.8GHz quad-core Intel Core i7 (Turbo Boost up to 3.8GHz) with 8MB shared L3 cache. (I configured to 2.8 with turbo)
Video Card/Graphics:
Intel HD Graphics 4000
NVIDIA GeForce GT 650M with 1GB of GDDR5 memory and automatic graphics switching
Dual display and video mirroring:
Simultaneously supports full native resolution on the built-in display and up to 2560 by 1600 pixels on up to two external displays, at millions of colors

Business Partner records with large numbers of addresses -- Move-in issue

Friends,
Our recent CCS implementation (ECC6.0ehp3 & CRM2007) included the creation of some Business Partner records with large numbers of addresses. Most of these are associated with housing authorities, large developers and large apartment complex owners. Some of the Business Partners have over 1000 address records and one particular BP has over 6000 addresses that were migrated from our Legacy System. We are experiencing very long run times to try to execute move in's and move out's due to the system reading the volume of addresses attached to the Business Partner. In many cases, the system simply times out before it can execute the transaction. SAP's suggestion is that we run a BAPI to cleanse the addresses and also to implement a BADI to prevent the creation of excess addresses.
Two questions surrounding the implementation of this code. Will the BAPI to cleanse the addresses, wipe out all address records except for the standard address? That presents an issue to ensure that the standard address on the BP record is the correct address that we will have identified as the proper mailing address. Second question is around the BADI to prevent the creation of excess addresses. It looks like this BADI is going to prevent the move in address from updating the standard address on the BP record which in the vast majority of cases is exactly what we would want.
Does anyone have any experience with this situation of excess BP addresses and how did you handle the manipulation and cleansing of the data and how do you maintain it going forward?
Our solution is ECC6.0Ehp3 with CRM2007...latest patch level
Specifically, SAP suggested we apply/review these notes:
Note 1249787 - Performance problem during move-in with huge addresses
**applied this ....did not help
Note 861528 - Performance in move-in for partner w/ large no of addresses
**older ISU4.7 note
Directly from our SAP message:
use the function module
BAPI_BUPA_ADDRESS_REMOVE or run BAPI_ISUPARTNER_CHANGE to delete
unnecessary business partner addresses.
Use BAdI ISU_MOVEIN_CUSTOMIZE to avoid the creation of unnecessary
business partner addresses (cf. note 706686) in the future for that
business partner.
Note 706686 - Move-in: Avoid unnecessary business partner addresses
Does anyone have any suggestions and have you used above notes/FMs to resolve something like this?
Thanks,
Nick

Nick:
One thing to understand is that the badi and bapi are just the tools or mechanisms that will enable you to fix this situation. You or your development team will need to define the rules under which these tools are used. Lets take them one at a time.
BAPI - the bapi for business partner address maintenance. It would seem that you need to create a program which first read the partners and the addresses assigned to them and then compares these addresses to each other to find duplicate addresses. These duplicates then can be removed provided they are not used elsewhere in the system (i.e. contract account).
BADI - the badi for business partner address maintenance. Here you would need to identify the particular scenarios where addresses should not be copied. I would expect that most move-ins would meet the criteria of adding the address and changing the standard address. But for some, i.e. landlords or housing complexes, you might not add an address because it already exists for the business partner, and you might not change the standard address because those accounts do not fall under that scenario. This will take some thinking and design to ensure that the address add/change functions are executed under the right circumstances.
regards,
bill.

I am recording with Logic Pro X, using my Yamaha XS8 keyboard as a Midi controller. I also have a Thunderbolt Display. Every time I play and release a note on the keyboard, the Thunderbolt Display speaker emits a doink sound. How do I get it to stop?

I am recording with Logic Pro X, using my Yamaha XS8 keyboard as a Midi controller. I also have a Thunderbolt Display. Every time I play and release a note on the keyboard, the Thunderbolt Display speaker emits a doink sound. What is causing it and how do I get it to stop? My sound is running through the Saffire Pro 40 Interface (Focusrite) into external speakers with powered amps.
Also, When I record I am hearing little pops in the system. I have checked all of my meters and they are not clipping. What is causing it and how do I get it to stop?
Ken

MUYconfundido wrote:
Pancenter,
Thanks for the response, but I do not have a midi interface. I am using a midi to usb connector cable, thus bypassing the need for a Midi interface.
The Mac reads the USB cable as a midi device, but not the keyboard that I am trying to use as a controller. I have tried it with my korg sp 300 and with my Nord Electro 2.
Thoughts?
Thanks,
Tristan
Tristan...
This is what you have, correct?
http://www.alesis.com/usbmidicable
This from Alesis..
"The AudioLink Series USB cable receives and outputs MIDI signal thanks to its internal interface. The USB-MIDI Cable connects plug-and-play to your Mac or PC for an all-in-one USB-MIDI solution."
Notice, -internal interface-. What you have is a simple USB MIDI Interface. Most MIDI interfaces are USB.
My point is (was), MIDI OUT of the Korg goes to the connector marked MIDI IN on the Alesis, those new to MIDI often get this wrong.
pancenter-

I have a digital voice recorder with a 3.5mm mic and headphone jack and want to transfer some recorded lecture to my mac book pro. The mac book does not have 3.5mm jacks. Does anyone know if a jack to USB converter would work?

I have a digital voice recorder with a 3.5mm microphone and headphone jack and want to transfer some recorded lectures to my mac book pro. The mac book does not have 3.5mm jacks. Does anyone know if a jack to USB converter would work?

Is there a pattern to the time of day or other detail that may be
traced back to a OS X system cause of this odd phenomenon?
Are there any copies of system files on any of the attached USB
external drives? Any libraries, such as iTunes, iPhoto, etc?
Once the drives are indexed by Spotlight, are their permissions
ignored by the OS X? Content, if neutral, should not affect the
wake or sleep cycle; especially if they're ignored by the OS X.
Could there be a bad cable or other component? If so that would
be a difficult process of elimination to detect it. Usually replacing
most suspect components in the USB stream (external to Macs)
is a rote way to mechanically test that idea; & not 100% sure.
Does the equipment all have a good ground to the utility or house
electrical field? An intermittent ground may affect more than sleep.
Hard to say at this point. Maybe a late-night talk radio guru on
remote viewing could peer into your situation and sleuth it out?
Sorry to have run out of ideas, but the process must be electrical
& mechanical to some extent. - Or perhaps odd software inspired.
Do you have any phone-home spyware items inside, just jumping
at the chance to spill your information? Little Snitch may help.
PS: Perhaps the computer needs to go into Apple & have a genius
or product specialist at AASP test the unit thoroughly... BlueTooth?
see:
https://www.google.com/?gws_rd=ssl#q=Wake+reason:+XHC1
Good luck & happy computing!
edited 2x

Recording with guitar to computer through USB X-Fi

I am having a problem trying to record with my guitar through my USB X-Fi 5.. I am using a program called Audacity to capture the recording. I have my guitar hooked up to a Line 6 POD 2.0 effects device that has a left/right output. Then I plugged the /8th male end running from that into the Line-In port on the USB X-Fi 5. and then to my computer via USB. But I cannot hear my guitar when playing and it will not capture the recording. I basically bought the USB X-Fi 5. because when recording with my guitar I thought that my laptops sound card was making the recording of low quality. So I got the USB X-Fi 5. to help that. Any help would be greatly appreciated!Message Edited by BulletFMV on 2-06-2008 03:42 PMMessage Edited by BulletFMV on 2-06-2008 03:43 PM

That USB audio interface isn't any better for recording from onboard sound. You should have bought least the Creative E-MU 0202 USB (if you prefer Creative products/USB audio interfaces).
With your current setup, instead of using Audacity, you could try, say, Cockos Reaper + Asio4All driver.
- http://www.reaper.fm/
- http://www.asio4all.com
In any case, remember also read the software documentation as well ... all needed information for recording task is normally guided there in user manual(s).
jutapa

Payment cancellation records with debit amount 0 can't be extracted to BW?

Payment cancellation records with debit amount 0 can't be extracted to BW?
We use 0FI_AP_4 to extract R3 data to an ODS. We restrict the data selection in the ODS start routine of update rule to select company code range and accounting document types. Today R3 people added one new accounting document type with 10 records generated. Run RSA3 can see the 10 records with new accounting document types. But somehow the 10 new records can't be brought into BW and we have tried many different ways by even just restrict company code range inside the start routine, but still not helpful. All other document type records can be brought in except the 10 new records for the new document types which reflect payment cancellation. We run RSA3 to compare the field value difference between the new doc type and other types, find the difference is on the debit amount value that all the new records debit amount values are null but with positive credit values and other doc types of records are the opposite that their debit amounts are positive and their credit amounts are 0. The new records are not even in PSA.
Is this the way SAP set up that only debit amount with values can be extracted to BW?
Thanks
Message was edited by: Kevin Smith

hi Diego,
We have tried almost everything like refresh the load from Initial, but still no help.
A hint is that R3 people posted the records today which is 8/18 and the variant they used is V6 (July - June, 4 +1 year), the fiscal year for these new records are 2007. The problem we found is on DEV and we found actually all transactions in the fiscal year 2007 have failed to be extracted to our DEV BW, but on our TEST system, all the transactions in the fiscal year 2007 have been extracted to BW.
Any idea?
Thanks

How & why Record with an external drive?

Hi. Okay, in another topic I posted it was recommended that I record with an external drive and not the internal drive... I have a 7200rpm firewire 400 lacie drive... so how do record with it? Why and how will this improve my Logic Pro recording experience? I also have a FirePod firewire interface.
Thanks,
Bill K.

To record onto an external drive, simply go to the audio menu and choose "Set Audio Record Path..." From here set your recording path to be somewhere on your external drive.
In general, it best to record to a drive other than your system drive. Depending on what you are doing, the system drive can be writing/reading cash files, data files and doing other Logic/OSX related activities in the background, all of which slows down your disk. You of course can still use your system drive to access data, but because its doing other operations, you may not be able to run as many audio tracks at once as you could using a dedicated external drive.
Try both methods and see which works best for you and your system.

QuickTime runs .avi-file with black screen

I've recorded my little daughter with our new digital camera and have loaded it on the computer, but QuickTime run it with black screen and without any sound. clips recorded with my mobile phone are running without any problems.... what can I do?

I tried to open GSpot.exe, but it says:"Error opening Data file C:\Dokumente und.....\emp\wza58c\GSpot27.dat: (where i downloaded it) This file must be available in the current working dir or the .exe dir. Please ensure you are not attempting to run GSpot from inside a ZIP file."
When I click "ok", it says Invalid gspot.dat file:"
sigh
What next?

Recording with Quicktime and adding effect

Hi all. I am recording Firewire video in Quicktime Player. The audio comes from a seperate source, through the line-in. To synchronize, I need to delay the audio by 600 ms. Does anyone have a method of doing so? I have an AU delay that would work. I just can't figure out how to apply it to the live lin-in.
Thanks very much for any help.
Jeremy

I'll pass on some things I discovered, in case anyone has this question or anyone can add to this.
I succeeded to some degree, by doing this:
1. Installed Soundflower; this creates virtual sound inputs and outputs, so sound can be passed between applications.
2. In GarageBand, I created a real instrument.
3. Set input to Line-in
4. Added the Voxengo Delay AU (http://www.voxengo.com/product/sounddelay) which is free and simple. The Apple AUDelay repeats the sound as well, rather than just delaying it (unless I missed something).
5. Set GarageBand's sound output to Sountflower, and turned monitoring on.
6. In QT player, new movie recording, with audio input set to "Soundflower".
The good news is that I can save the GarageBand document, which can be opened and everything is immediately running. But, it would be nice if there was a way to add an effect to any input directly so that I only have to use one application.
Any suggestions to streamline this? It is for an installation which will be run by students, so the fewer steps needed to set this up the better.

Digital Recording with MacBook TOSLINK

I am having problems making a good recording with the TOSLINK port on my MacBook. I my audio source is a dj mixer sending SPDIF through a HOSA SPDIF/TOSLINK converer into my mini-TOSLINK port I get strange fluctuations in volume and generally bad audio.
Does anybody have luck with recording via the TOSLINK port? Could it be the bitrate coming outo f the mixer?

I use the Canon EOS Kiss Digital N, which in the US is the Rebel XT or something. I also use an external card reader, and the MacBook works fine with the camera.
I also use Adobe Lightroom and Photo Elements 4.0 to process and manage the photos, and they both run very well on the MacBook.
You'll have a lot of fun, it seems like the MacBook and MacBook Pro were just made for this stuff.

Databse of 1888 Byte Per Record with 259 Fixed Fields Stumped CR?!?

My Database of 15 million records/rows at 1888 Byte Per Record with 259 Fixed Fields STUMPED CR?!
Executive Summary :
I have lots of data. There are 15 million of records in some of my database files. But I need to drill into the data and get counts for each field.
I need to know how many times each data field (row) is populated in a database file. For example, how many of my records have last name? how many have first name? date of birth? etc. I need a simple report made using SAP "Crystal Reports 2011" Workstation type edition that SUMS each data row into a single column output like csv.
My database sizes can range from 1,000 to 18 million records that are in fixed field asci format with 1888 bytes and 256 rows per record! The report needs to SUM each data field or, in the case of a data field with a minimum of twelve tables, SUM each value of a table.
My contracted CR programmer is an expert although she was new to data files this humongous. Can anyone here help us get CR to work on my data? Here was her conclusion, Crystal Reports Fail:
My file is 14.1 gb as well. However, when run through Crystal Reports, it
only returns 2,274,876 records. Therefore, I am going to assume that there
is a Record Limit for Text files of this. I searched through all the
registry settings and there is nothing that appears to be limiting it. I
went online for a while to see if there was any information on it, and just
like when I used to work there, there was nothing concrete. Business Objects
does not physically test this large of data retrieval, therefore they don't
know the exact record limits.
I'm not sure what to suggest, but I don't think Crystal Reports is going to
work for you and I wouldn't have known that from the beginning without
testing your data. I'm 99% sure there is a refund policy on the software, so
you shouldn't have any issues returning it.
Since I only specialize in Crystal Reports, I'm not sure what other software
can handle this amount of data. Possibly Cognos, but you may want to find
out from them or do some research.
If your data were in a database that can run stored procedures (like SQL
Server or Oracle) then you could write SQL to only return the counts. Then
when Crystal connected to the stored procedure, it should work, but I can't
say for sure without testing it. And I don't have SQL Server or Oracle
installed on my machine. I believe MYSQL (the free version) has a limit to
the number of records it can hold and I'm sure 8 million would be over the
limit. Also, I'm not sure if it supports stored procedures. I have used it
once before and found it extremely cumbersome and limited. I think SQL
Server and Oracle are quite pricey, so I don't think that this will even be
an option for you.

Hi Shawn,
I actually contacted the same person you did also. Summer was a Report Designer Resource here and knows her stuff and the Report Designer as much as our Developer who wrote it do.
As I suggested in my first reply is to get all that data into a real database, one that can run Stored Procedures to do all the crunching unfortunately is the only way I can see this ever working.
Windows 7 and 8 CPU's doesn't help, 64 bit may but the problem is CR Designer is a 32 bit application so it can't take advantage of the 64 bit memory addressing space.
What you could so is post your question to the forum:
[Business Decision Making with BI|Marketing Library;
This is a forum for managers or anyone who wants to have a non-technical discussion about making informed decisions with analytics tools. Ask questions and share your experiences on how to effectively utilize data to address real business problems. Experts from inside and outside SAP will be monitoring these conversations and offering their knowledge along with the broader community.
Someone in there may have another SAP product that might be able to load your flat file into a data tool that CR can report off of.
I still think a copy of MS SQL 2008 Express is your best and likely cheapest solution and then you can simply import the data into it which it has an Import Wizard that makes it relatively easy to do... Although you may have to break your file into pieces for it to be able to process also.
You need to be flexible on that data source, I doubt you'll find anything that can report off of that huge of text file.
Good luck
Don

Firefox application quits unexpectedly on various websites with no pattern: firefox-bin [770]

Firefox application quits unexpectedly on various websites with no pattern. Part of the error message details reads "firefox-bin [770]"
It started happening this AM after I visited facebook and got an invite from someone I don't know. I didn't reply. Ever since, I can only browse Safari but for a few pages until it quits.
Please help.
Thank you.

Run /Utilities/Console and click 'All Messages' top left - look for the entries around the quit times and see if they give any pointers why the apps are quitting ? If you're not sure what the lines mean copy and post (just those not the whole log) here.
There may also be some clues in /Library/Logs/Crash Reporter nameofapplication_date

Data record with time interval error

Hi,
I have come across the following error.
Data record with Time interval error and data is getting loaded into data target and no PSA in between.
thanks
kris

Hi Kris,
Could you please explain your problem little bit more. I mean what is source and target, or you using IP or DTP.
goto the details in monitor tab, you will come to know to which record yo uhave error.
If you are running IP, it is recommended to keep PSA.
Regards,
Venkatesh

I canu00B4t run various records with BAPI_NETWORK_COMP_CHANGE

Similar Messages

Maybe you are looking for