I need the Line Per Inch # for an HP3052A printer/scanner.

Hey guys,
I am working on some photo, enlargements and other tasks. I am working through some manuals for the software I am using and I need the lines per Inch value for this printer. Unfortunatley for me, I cannot find it on their site, specifications or through PM tech support. I figured one of you experts, may have the actual value or a working value.
I hope I am explaining what I am looking for.
Thanks for any help you might be able to give me.

I am including a link so you can download the drivers for your printer. The next step would be to select type of operating system you are using. For illustration purpose i choose windows 7 64 bit. Then select driver i recommend using the full feature download.
Let me know if this helps.

Similar Messages

How can I check the number of lines per inch in my document (I need no more than 6 per inch!!)

I need to produce a dopcument in New times Roman with a minimun of 12 ot font size, single spaced and , with no more than 6 lines of type per inch?
How can I check that I do not have more then 6 lines per inch?
thanks in adavance!!!

If this is about Pages for iOs, you can certainly set TNR adn 12 pts, but no, there is no lines per inch settings.
If this is about Pages for OS X, you are in the wrong forum.

Please tell me which Ipod dock adapter is compatible with the Ipod Classic 80GB? They no longer make this particular Ipod and I need the right dock adapter for my Panasonic SC-HC25 stereo system I recently purchased.

Please tell me which Ipod dock adapter is compatible with the Ipod Classic 80GB? They no longer make this particular Ipod and I need the right dock adapter for my Panasonic SC-HC25 stereo system with universal dock for Ipod/Iphone I recently purchased.
You can also send my answer to [email protected]
Thanks in advance for all who will help.
slovebk

refer to this Apple support Article, on Universal Dock which retail at $59 at Apple store.
http://support.apple.com/kb/HT1380
Look through the compatible list chart and see which 80GB model are you using, either ID 9 or 10. you can order through Apple Online Store.
Have a nice day!

Does anyone know the power cord part for HP A532 printer? I need a replacement cord. THANKS!

Does anyone know the power cord part for HP A532 printer? I need a replacement cord. THANKS!

Here's the steps to follow if your printer isn't turning on.
If you've gone through all those steps and you still don't have power, there are a lot of places that sell a replacement cord and supply for that printer.
I am an HP employee.

Do I need to export multiple sizes for all standard print sizes? i.e.Say I crop the image in LR to 6'5" x 9' to fit within an 11" x 14" (overall) mat of a framed print.. Now let's say I want to reprint that same image in a 12" x 16" size ... to fit within

Do I need to export multiple sizes for all standard print sizes? i.e.Say I crop the image in LR to 6'5" x 9' to fit within an 11" x 14" (overall) mat of a framed print.. Now let's say I want to reprint that same image in a 12" x 16" size ... to fit within a mat of with overall size of 20" x 24"? Or will the 1st export be "locked" at 6.5" X 9" (proportionately)?

So, for the first one Export it cropped to 6.5 x 9 - and in the Export Dialog box there is a capability to rename the file for exported output - which would allow you to add something like the crop or intention to the base name of the file. e.g. for _IMG0846.nef - setup the output filename to _IMG0846-65x9 for 11x14.jpg and output it at, say 300 or 360 dpi. So, it has a unique name and purpose in your output folder.
For best results, now, re-crop the picture in LR - just open the crop [R] dialog again, reframe the image to the new ratio, 12x16 and Export again - with an adjustment to the filename. e.g. _IMG0846-12x16 for 20x24.jpg
So, now you have two clearly identified image files in your output area and you can provide those to whomever is printing for you, etc. Discard them when you're done since you always have the original to return to to re-frame again as necessary.
This way you get output sharpening and resolution (in pixels) optimized for your output print size. Maybe not super important for smallish prints-but more important for larger ones. Output at 100 quality.

I need the right plug in for my online tech training course--HELP!

I need the right plug in for my online tech training course--it requires Macropedia Flash Player 8 and Internet Exploder 8 (but worked with my Safari ver 5.06). I updated my iMac software and Acrobat application software and now it won't show the study material nor animations.... I have MacOSX ver 10.5.8, 2GHz Intel Core 2 Duo 1 GB 667 MHz and Acrobat X. How do I get back to what I had previously?!? PS: my Time Machine is not setup so that won't do the trick this time...

About Safari 5.1.7 and Leopard Security Update 2012-003
Summary
Learn about Safari 5.1.7 and Leopard Security Update 2012-003.
Products Affected
Mac OS X 10.5, Product Security, Safari 5.1 (Mac OS X 10.6), Safari 5.1 (OS X Lion)
Safari 5.1.7 for OS X Lion, Safari 5.1.7 for OS X Snow Leopard, and Leopard Security Update 2012-003 disable out-of-date versions of Adobe Flash Player.
Out-of-date versions of Adobe Flash Player do not include the latest security updates and will be disabled to help keep your Mac secure. If Safari 5.1.7 or Leopard Security Update 2012-003 detects an out-of-date version of Flash Player on your system, you will see a dialog informing you that Flash Player has been disabled. The dialog provides the option to go directly to Adobe's website, where you can download and install an updated version of Flash Player.
Additional Information
If you need to re-enable an out-of-date version of Flash Player, you can do the following:
Navigate to the /Library/Internet Plug-Ins (Disabled) folder.
Drag "Flash Player.plugin" into /Library/Internet Plug-Ins.
If the browser is running, quit and restart it.
http://support.apple.com/kb/HT5271
http://support.apple.com/kb/HT5655

Need the Design Standard CS3 for Mac for companies

Our company in 2007, was bought Design Standard CS3 for Windows. The certificate shall have the serial numbers for the Mac platform and Windows. But on the DVD program for the Windows platform.
Now we need the Design Standard CS3 for Mac for companies. Support in Russia can not provide distribution. Help!

Please, help!

Need the AD Link cable for SB X-Fi and other models. Anyone have an unneeded one?

Need the AD Link cable for SB X-Fi and other models. Creative is out of stock & discontinued. Anyone have an unneeded one? TIA.

This will do it perfectly. http://www.cableyourworld.com/prodde...?prod=CYW-1755
I once swapped such a cable with the one supplied by Creative because I needed a few extra inches of length. Therefore my recommendation is no gamble, it is a certainty. The only reason I would anticipate failure is if the PIN 1 matching is not performed on both the sound card and I/O bay. I have also seen people turn the cable upside down as well.

Do I need the same ip address for my computer, router and printer?

Do I need the same IP address for my computer, router and printer?
I am trying to reset my router. I have had a lot of problems with "no connection" to my wireless printer. I reinstalled the software and it works for a while.
Also, lose connection a lot on my laptop or it says I am a guest. My cable provider said it is my router.

A typical convenient-sized "block" of addresses commonly used is just under 256 addresses. The router almost always is at location xx.yy.zz.1
By default, DHCP will pass out addresses starting at the next address, xx.yy.zz.2 and keep going up toward 254.
By convention, the Address at the end of the range ( xx.yy.zz.255 in this case) is a "magic" address used for broadcast messages, and must not be assigned to an actual device.
To talk to each other easily, the Addresses must "match" in the first three octets of their address, and be different in the last octet, as the above examples do.
When you produce a reference outside that range, such as asking for Apple's web page at:
http://17.149.160.49
It is sent to your Router, which acts as your "agent" in dealing with the Internet. The Router hides your computer's local address and uses its own Public address (provided automatically by your ISP) so send out packets on your behalf, and listen for the answering packets coming back.
When you use a Router that you control, your computer cannot receive unsolicited queries from the Internet at large because the Router's Firewall discards them. Having a Router that you control means you already have the protection of its Firewall, and need not enable the Firewall built-into your Mac.

I am getting horizontal white lines one inch apart when I print an Ai file

I am getting horizontal white lines one inch apart when I print an Ai file

*White lines 1" apart showing up on my printouts*~
It is a NEW Epson 1430. However, I have horizontal thin white lines across my prints. (13x19in Paper) I've cleaned the heads, ran a test print, realigned and then reprinted - I keep getting the same white lines in exactly the same places.
I’m printing an AI file in Illustrator and the lines don't show up on my screen. Is there something wrong with the data? I am going to do more experiments to try and identify exactly what conditions cause this problem.
Thank you for your help!

I am looking for a multifunction printer, scanner, copier that is seriously easy to use for my very un tech savvy father. Must have AirPrint. Any suggestions?

I am looking for a multifunction printer, scanner, copier that is seriously easy to use for my very un tech savvy father. Must have AirPrint. Any suggestions?

I am looking for a multifunction printer, scanner, copier that is seriously easy to use for my very un tech savvy father. Must have AirPrint. Any suggestions?

8ft x 4ft poster...but how many dots per inch for images?

I've read a online somewhere a while back that the bigger the end product, the less the amount of dots per inch needed. is this true? if so, when do I start changing from 300dpi for A3 sizes to smaller DPI's on larger size prints?
is there a way to calculate this? I'm always thinking it might for spending less ink on the larger size prints, etc
and what should I use for a 8x4ft poster when:
1. people are gonna see it up close
2. when the closest they get would be about 4-5 feet away
with this particular poster, people are gonna be up close.
thanks for any info

Was DYP wrote:
hummm....I would'nt want to work on an 8ft x 4ft banner at s/s size on a 21" inch screen, each to his/her own I guess.
I don't see where that would make any difference in working with the file, but it sure makes it convenient for printing. I work on lots of full size banners all the time. The only time a make them less than full size is when I am working on something bigger that 18' which is IDs maximum size.
But doing them half size at 300 dpi is fine to. You just need to be careful that your graphics are not to low a resolution or you will be in for some surprises from IDs output, especially if you trying res-up when printing.
I was really trying to suggest its easier to move around on screen if the artwork is not size for size.
I guess everyone has their own particular way of working. I don't even produce A2 output at s/s size. I'll do that at either A4 or A3.
I agree with the low res graphics. I don't seem to have any issues with just supplying 300dpi for any sized output to be honest. I've produced largish exhibition stands and A4 hand-outs from the same file. Seems to work ok for me.

Customer aging report-needs the line items behind it

We have created a Z report for customer aging report,is it feasible to get the drilldown against each aging bucket.I.e to call the FBL5n report to be displayed to see the line items behind each aging bucket.
Regards
Rekha

If standard report does not suffice your requirement, then create your own.
FOR vendor USE K in transaction code instead of D.
Hello,
The following example I have given is for customers.
The only difference is in transaction codes. For customer you go to FDI1, for vendor you go to FKI1 (reports).
For Customer you go to FDI4, for vendor you go to FKI4 for forms.
Remaining all are the same.
Hello,
Go to transaction code FDI4
Select Form Type RFFRRD20 Line item analysis
Give your form name and description
Structure (Two axis) - as defaulted
Click on Create
You will have lead column
Delete the rows 2, 3 and 4
Double click on column 1
Enter the customer numbers from 1 to 999999
First column double click (A)
Slelect following values
Due date analysis 1
Days for net due date 0 to 30
Give the short name, medium name and long text for the column.
Repeat this step in next columns like 31 to 60, 61 to 90, 91 to 120 and 121 to 99999 days etc in other columns and select due date analysis 1. (B,C,D,E)
Create one more column by way of formula. To create a new column you need to double click on blue line. Put formula add all five columns you have created above. (F = ABCDE)
You prepare one more column with
Due date analysis 2 (G)
Now you prepare one more column add (F+G) = This will be total open items = over due and not due.
Now go to FDI1 and prepare a report - assign the form created in FDI4 to the report.
Characteristics you need to select are
Account Type (Select Account Type as D for customers)
Currency
Customer
Document Type
Special G/L Ind
Company Code
Change the output types and options according to your requirement.
Refer FDI2 and FDI3 for other standard reports created.
Refer FDI5 and FDI6 for other standard forms created.
Save your report and execute.
From there you can put the cursor on customer number and from the menu goto -> line items then it will go for each line item wise..
Regards,
Nauma

I just need the line activated!

I registered for a home move on saturday, it said that because I have all of the equipment and there is a line in my new flat already, that they would just activate it on the 1st of October. I received an email today telling me that I would have an engineer out to isntall my new service on the 19th of November... nearly 2 months away. I called BT and they said they would just try and move my installation sooner, and would call me back.
last time I moved with this service I moved onto a line that hadn't been used in 8 years, and there was no problem although they couldnt transfer Infinity as the line wasn't new enough. It took them 1.5 weeks to transfer my service, they didn't come out and instead did it all from their service centre, by literally just turning the line back on.
This time I have the same situation, but instead they believe they are sending me new equipment (which I already have), as well as sending an engineer to turn it on. Again, last time I moved they said that they were sending an engineer but didnt bother to tell me that he wouldnt actually be coming because they wouldnt need to be at the property (one day of full work out of the window for nothing).
They speciifically told me when I requested the home move that it would be the 1st of October, only to email me today saying I had to wait 2 months.
What do I do? I need it for all work purposes. As does my partner. I have the equipment already, I have the line, I just need them to flick the switch on. Why do I have to wait 2 months for that?
I have tried to be polite on the phone with the people I have talked to. I'm not sure how long I can keep up the understanding tone for...
Callum

Hi
I am sorry to see you are having problems with your BT Service
I suggest you contact the forum mods they may be able to get this problem sorted for you this is a link to them http://bt.custhelp.com/app/contact_email/c/4951
They normally reply by email or phone directly to you within 3 working days they will take personal ownership of your problem until resolved and will keep you informed of progress
They are a UK based BT specialist team who have a good record at getting problems solved
This is a customer to customer self help forum the only BT presence here are the forum moderators
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Profit Center is missing in the line item 002 for Customer Payment

Dear Friends,
We are having one issue with Customer incoming payment. We are following the Business area concept. Now the customer is from the different business area and paying at Ho. HO has different Business area. So while processing the incoiming payment i have to enter different business ares for both the customer and Bank line item. There is no profit center field in the customer line tiem. When we are trying to post it, system is giving error message "Balancing field Profit center not there in line item 002".
If i process the same scenario with same business area for both the line item then system is picking th eprofit center from the bank line item.
Is there any possibility i can map this scenarion in the Document splitting functionality?? or else how can i process this scenario??
Regards,
Deva

Hi Lakshmipathi,
Yes the Document split has been activated. This issue is the specific one. We have different C&F location. Sales happens accross India. Hence we have created the Business area concept for each location to get the location wise balance sheet. I have also activated the zero balancing for Profit center and also Business area so that i can derive the Location wise Balance sheet.
Now the sales invoice has been processed from C&F Location. Customer deposit the Cheque directly to the Head office Bank and not at the C&F Location bank. I don't want to clear the existing open item because 50% of the cheque gets bounced. So i am booking the incoming payment without clearing the open item.
While processing the incoming payment user is entering the C&F location business area in the customer line item (Credit line item) and Head office business area for the Bank line item as the bank is at the Head office so that we can arrive the Balance sheet.
Now system is not deriving the profit center for the customer line item even though the business area wise zero balance has been activated. Recon account field status group has market as optional for profit center but in F-28 i am not able to get the profit center field (Because it is balance sheet item).
The Document type already been configure for Document split and the Recon account also categorised as Customer inthe doc splitting. I don't have any problem with document split other than this issue.
For this issue anything can be done in the document split??
Regards,
Devendran

I need the Line Per Inch # for an HP3052A printer/scanner.

Similar Messages

Maybe you are looking for