Do I need to export multiple sizes for all standard print sizes? i.e.Say I crop the image in LR to 6'5" x 9' to fit within an 11" x 14" (overall) mat of a framed print.. Now let's say I want to reprint that same image in a 12" x 16" size ... to fit within

Do I need to export multiple sizes for all standard print sizes? i.e.Say I crop the image in LR to 6'5" x 9' to fit within an 11" x 14" (overall) mat of a framed print.. Now let's say I want to reprint that same image in a 12" x 16" size ... to fit within a mat of with overall size of 20" x 24"? Or will the 1st export be "locked" at 6.5" X 9" (proportionately)?

So, for the first one Export it cropped to 6.5 x 9 - and in the Export Dialog box there is a capability to rename the file for exported output - which would allow you to add something like the crop or intention to the base name of the file.  e.g. for _IMG0846.nef - setup the output filename to _IMG0846-65x9 for 11x14.jpg and output it at, say 300 or 360 dpi.  So, it has a unique name and purpose in your output folder.
For best results, now, re-crop the picture in LR - just open the crop [R] dialog again, reframe the image to the new ratio, 12x16 and Export again - with an adjustment to the filename. e.g. _IMG0846-12x16 for 20x24.jpg
So, now you have two clearly identified image files in your output area and you can provide those to whomever is printing for you, etc.  Discard them when you're done since you always have the original to return to to re-frame again as necessary.
This way you get output sharpening and resolution (in pixels) optimized for your output print size.  Maybe not super important for smallish prints-but more important for larger ones.   Output at 100 quality.

Similar Messages

  • HT3669 I only have a HP printer and why I need to install a file for all the HP printers drivers 590MB??? if normally the size of my file should be 5MB.  some one could me help to avoid installation of 590MB for my new mountain lion software???

    Hi guys..!!
    I would like to know if someone could help on this:
    I just have a HP printer (HP Designjet 100) and for some reason I need to install a file for all the HP printers drivers in total 590MB to be able to use my printer in my mountain lion???
    If normally the size of my files in the for previous software was more or less 5MB why now i need to install 590?
    Some one could help me how to avoid installation of 590MB for my new mountain lion software???
    Thanks

    If you go to http://support.apple.com/downloads and locate the HP Printer Drivers installer, you will find that it is 473.4 MB (for version 2.11). If you install this, it will install the full set of drivers for every model of HP printer that is supported by the drivers distributed through Apple. The disk space occupied once installed will probably be larger than the download, since the downloaded file is compressed.
    On the other hand, if you have an HP printer connected and you use Software Update (or the Update tab in App Store), that should offer you a much smaller set of HP drivers, which are only applicable to your printer (and possibly a few similar ones). These updates are typically only tens of megabytes rather than hundreds of megabytes.
    If Software Update doesn't offer you any HP drivers then it either thinks you have the latest drivers installed already, or the printer model is not supported by the drivers available from Apple.
    This article lists all of the printer models for which Apple distributes the driver:
    http://support.apple.com/kb/HT3669

  • How to export execution commands for all jobs in project?

    I would like to export the execution command line windows batch file and text paramater file for over 700 BODS Jobs in a Project folder.
    Is there a command line tool or BODS Utility to export execution commands for all jobs in a project?

    if you look at the command line most of the information is fixed like job server, port etc., the main thing that you need is the GUID of the job, that you can get from AL_LANG Repo table. You can write a script or a DS job to build this command line and write to a bat and txt file for each job

  • Script to "Reset size" for all images in a RoboHelp project

    New UI. Quick fix to pull new screenshots is hampered by the size constraints of graphics.
    Is there a (third party or built in) script that will reset size for all the images in a RoboHelp HTML project?
    RH8, RoboHelpHTML bulished as WebHelp.
    PS the filter in Adobe Forums doesn't allow me to limit the search to RoboHelp HTML and WebHelp; I don't have any other Adobe products, so all the hits don't apply.

    Thanks for this script!
    What needs to be done to convert a .jsx into an .exe executable that I can add to the RH Toolbox (pod) and run it in a project on my terms, rather than import into the project so it runs (whenever I compile?)
    What is the ReSize tool for that already exists in the toolbox?

  • Can I switch calendars (Ex. "night shift" to "day shift" cal) with a repeating event, but ONLY for that one event??  It asks "for all events or only this event" if i change the time.  But it changes ALL events when i try and switch calendars.  Any help??

    I have 2 calendars set up for my work schedule, a "night shift" and "day shift" calendar.  I've set up repeating events fro Fri/Sat/Sun 3-11pm "night shifts" and Mon/Tues 7am-3pm "day shifts".  But lets say for example that I swap shifts and instead of working nights on Saturday like I normally would, I am now working days.  I want to change that in my calendar.  When I go to change the event, if i change the TIME it asks if i want to change all event or ONLY this event.  no problem....just this single event.  but when i go to change the event from the "night shift" calendar to the "day shift" calendar, it changes ALL the repeating events, and not just that one single event.   can anyone help with this???  am i doing something wrong?  is there a way to do this or not with the new iCal program???  i used to do this and never had any problems.    Thank you!

    You need to follow iPhoto terms since we only know what you tell us
    what are you calling folders - in iPhoto folders can not hold photos - albums hold photos and folders hold albums or other folders
    The basic default view of photo is by event (iPhoto '08 and later)
    Exactly what you you trying to do?
    LN

  • Can't get around this error after adding second dataset...A scope is required for all aggregates used outside of a data region unless the report contains exactly one dataset

    I added a dataset to an existing report and broke an aggregation.  In the old (i.e. single dataset) report, this expression below worked fine.  I wanted to get a distinct count of the vst_ext_id field when my educated field was like "VTE1*"
    = CountDistinct(IIF(Fields!educated.Value like "VTE1*", Fields!vst_ext_id.Value, Nothing))
    After adding a new dataset, this no longer works and I get the error " A scope is required for all aggregates used outside of a data region unless the report contains exactly one dataset".  Having done some research online, I found that I
    needed to specify my dataset explicitly and I thought this new expression might work, but still no success...
    = CountDistinct(IIF(Fields!educated.Value,"DataSet1" like "VTE12*", Fields!vst_ext_id.Value,"DataSet1", Nothing))
    Am I missing something?  Based on online responses, this explicit dataset naming convention seems to help most people, but it isn't working for me. 
    Thanks in advance!
    Brian

    I found the answer.  Apparently, my expression syntax was off.  This expression does the trick...
    = CountDistinct(IIF(Fields!educated.Value like "VTE12*", Fields!vst_ext_id.Value,Nothing),"DataSet1")
    I just happened upon this particular syntax searching online.  I was trying to specify the dataset name after each .value, but I never got that to work.   This is the only time I have found this particular syntax online. 

  • I know the iphone 4s can turn off the vibrate for all sounds, but is there a way to keep the vibration on for just phone calls (with the ringtone also on) but off for everything else?

    I know the iphone 4s can turn off the vibrate for all sounds, but is there a way to keep the vibration on for just phone calls (with the ringtone) but off for everything else?

    Short answer: No.  Long answer: Nope
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
    WYSIWYG   No hidden settings.
    If you want to suggest this to Apple:
    http://www.apple.com/feedback/iphone.html
    Message was edited by: modular747

  • Need help exporting multiple individual PDF files out of Indesign CC

    I work for a monthly publication and we send our files to the press at the end of the month. There are around 190+ pages that need to be exported as individual PDF's and each PDF needs to be labled as their correct page number. Since we often are backed up against the wall at our deadline, we really need a way to export all these files at one time. Is there a way to export multiple PDF files at one time in Indesign CC?

    You could script InDesign to export each page as individual PDF with specific export presets and labeled with correct page number.
    But you could also use Acrobat Pro for this task (sorry for the certainly wrong translation of the Acrobat UI – I use a german version ...):
    Export the whole publication as 1 PDF file (pp. 1-190).
    Open it in Acrobat Pro and choose »Tools › Extract Pages«.
    Type 1 to 190 and check the box »extract pages as single pages«, choose the location where to extract to and acrobat automatically numbers your new PDFs sequentially from 1 to x. (Caution: it doesn’t take the correct page number, but numbers sequentially, so it is important to have a PDF from pp. 1-190 in the correct order.)
    So with this (as mentioned – sorry for German ):
    You’ll get this:
    Tobias

  • Need help exporting .mov files for editing in PE3

    hi,
    i'm trying to export HD .mov files from an Aiptek GO-HD camcorder that seems to record in QT format with some funky codecs. I need to export it into a format that i can edit on a PC using Premier Elements 3.0. The few tests i've run have shown a huge increase in size when exporting from .mov to .avi (100m to 30 GB).
    Does anyone have any suggestions or experience doing this?

    You just need to open the .mov file with Elements.
    You don't need to convert it using QuickTime Pro
    first.
    Premiere may "convert" it to some other format to
    allow editing (I don't know) and that would only take
    some time at import.
    HD files are anywhere from 10 to 60 MB's per second
    (some even higher) so a DV version will drastically
    increase in file size.
    What, besides editing, is the goal of your work?
    that doesn't work with this camcorder. apparently the encoding is called QT, but it really isn't. i have to export into something else in order to edit.
    the goal of my work is to convert choppy family video into something clean that i can share with friends and family via CD / DVD (not streaming on net).

  • Exporting multiple tracks for podcast?

    I recorded the voices for a podcast on the first track, and put some jingles/bumper music music on the second track. When I tried to Share>Export song to disk, it only exported one track or the other. How do I export multiple tracks?
    Thanks.

    Don't know if there's something glitchy with podcast exports, but unless you have one Track soloed or muted they should both export. Make sure there's no Ducking turned on.

  • Need to export multiple tracks

    I have a sequence with 8 tracks of audio.
    When I created the sequence, I set it up as "Stereo", not "Multichannel."
    Now I need to export 8 separate WAV or AIFF files, 1 per track.
    I cannot change the sequence to multichannel.
    I could create a new multichannel sequence, and copy/paste, but then I lose all my Track Mixer effects and levels, which would take a LONG time to re-create manually.
    Is there no way around this?
    I suppose I could open it in Audition... but that will create a bunch of extraneous files.

    Yeah ... that's what I ended up doing.
    Premiere really needs
    (a) option to change track settings after the fact; and
    (b) ability to copy TRACK MIXER settings from one sequence to another. Especially Track effects. Ideally with PRESETS...

  • PP : Need to find Multiple Batches for different production Orders

    Hi Experts,
    I have a requirement that, user wants to see the  "Single batch assigned for multiple production orders and different materials"
    Which its a off case, it cannot be done , but i have gone with 1. So user wants to know all the Orders which has same batch but for different  materials & Orders.
    Please help me in this regard.
    Br,
    SandeepCH

    Hi Shri,
    Please find the attachment  for your better understanding.
    Yes, as you said one material can have multiple batches, But that same batch cannot be linked with other material. This was my requirement.
    So now i want to know all the  batches which came in double for different materials.
    Br,
    SandeepCH

  • How to create a PDF that prints at actual size for all printers

    I create printable educational products for teachers and homeschoolers.  I need to be able to make some printable PDFs that have cards set to a specific dimension, say 3" x 3".  When I create PDFs in InDesign and print them, the printer tends to shrink the PDF down.  This happens even when I set the Page Scaling to None.  But regardless of what my printer does, I would like to be able to create PDFs that print at actual size for anyone who purchases my products.  How can this be done?  Can I change the settings when I create the PDF?  Do I need to includes special instructions with my products?  Thanks so much for your help.

    You can specify the printing process in the PDF for Acrobat and Reader, open the PDF in Acrobat > file properties (right mouse click on the page) and in the extended tab (the most right tab) you can set printing not to scale for that PDF as default setting.

  • I'm new to Mac's and I find the display's just slightly too small. I'd like to increase the size for all my program. Is there a single setting that I can change?

    I'm new to Mac's and I find the display's just slightly too small. I'd like to increase the size of my display for all my programs. Is there a single setting that I can change as a default setting?

    You can drop the resolution a little, but it makes everything blurry.
    OS X isn't as friendly like Windows is to give some UI adjustment, one of many major complaints about the platform that has gone unheeded for years now.
    As a lifelong Mac user who's eyes are going due to age, I'm really liking Windows 7 more and more every day.
    If you use Firefox, NoSquint and Theme Font & Size Changer add-ons, with a nice persona that makes better contrast, tweak the FF toolbars, you can at least make your web surfing tolerable on Mac's.
    Also you can set a Control key in System Preferences > Universal Access plus a scroll wheel mouse, if you need to zoom in/out certain areas of OS X, however for a pernament UI scale solution there is none that's practical, unless you have a large room, a projector and a smooth wall.
    A larger monitor won't work up close neither, however dropping the resolution and sitting back a bit might sharpen the images a bit.
    The UI really needs to be adjustable and it's not.

  • Set the default size for all archive mailboxes including the ones it will be created in the future

    Hi there.
    We are in the phase where we Will enable Online Archive for all the users.
    We see that the default Archiving Quota is set up for 50 GB. We have found this powershell command on MsTechnet forum
    Get-Mailbox -resultsize unlimited | where {$_.ArchiveDatabase -ne $null} | set-mailbox -ArchiveQuota 7GB -ArchiveWarningQuota 6GB
    which I guess it will set up the ArchiveQuota to 7GB to all the users, true?
    The question is if this command will work only for those users who currently have archiving enabled or it Will also work for those users which we are planing to enable archiving in the future?
    The idea is that everyone would not have 50GB by default and this should be a default value also for those who currently do not have archiving enabled.
    with best regards,
    bostjanc

    Hi there.
    I don't quite get it.
    I have created "for example" a database called: STH ARCHIVE.
    Then if I take look on properties of this database this is how it's shown:
    And now here comes the "tricky part" which is a little bit odd to me.
    I have enabled archive on my mailbox and selected this STH ARCHIVE DB to hold this archive mailbox.
    Then I have manually ran ManagedFolderAssistant for my account: Start-ManagedFolderAssistant -Identity "my-email-address"
    And after I have greped the size of my mailbox:
    Get-Mailbox | Get-MailboxStatistics -Archive | Sort totalitemsize -desc | ft displayname,totalitemsize, itemcount >C:\report-archive-database-mailboxes.txt
    And get the result:
    Personal Archive - MYUSERNAME
    TotalItemSize: 4.071 GB (4,371,586,689 bytes)  
    ItemCount: 55227
    So now I don't understand how I was able to go thru that sizes which are in the upper print screen of archive DB properties?
    bostjanc

Maybe you are looking for