I need the manual for replacng the battery clock an old Compaq Presario 1247 laptop

Once upon a time I had a link to a document that showed how disassemble my Compaq Presario 1247 laptop to get to the clock battery. Can anyone provide the link to retrieve that manual?

Hi,
Please try this:
  http://www.retrevo.com/support/HP-1247-Laptops-manual/id/610ag710/t/2/
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • Link for how to replace the clock battery on Compaq Presario 1247 laptop

    Once upon a time I had a link to a manual that provided instructions on how to get to the motherboard for the purpose of replacing the clock battery on an old Compaq Presario 1247 laptop. Can anyone provide that link?
    This question was solved.
    View Solution.

    Hi,
    This should be the Maintenance & Service Guide you're looking for.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • The battery of my hp compaq presario needs to be replace,where can i buy it and how much?thanks,..

    the battery of my hp compaq presario needs to be replace,where can i buy it and how much?thanks,..

    Hi,
    There are many Compad Presario models/laptops out there, you need to buy the right one for your machine. Here is a place, you can buy from them or using as a guide (cost) to buy elsewhere:
      http://www.hp-laptop-batteries.com.au/compaq-laptop-battery.htm
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I refurbished my macbook air 7 months ago because there was a problem with the steady state drive. Now my battery seems to be dead again. How long does the warranty last? Do I need to pay for a new battery?

    I refurbished my macbook air 7 months ago because there was a problem with the steady state drive. Now my battery seems to be dead again. How long does the warranty last? Do I need to pay for a new battery?

    As I wrote Apple will diagnose an Apple product even if it is out of warranty for free. That should be your first step to find out if the problem is the battery or something else.
    Once you have Apple telling you a 7 month old battery is defective (if that turns out to be the case)  then it becomes a game of horse trading. You'll need to speak to the tech and when he tells you there is nothing he can do you will need to speak to the tech manager and when she says most likely there is nothing they can do you go to the store manager, etc.  It is unlikely (though possible) that they will give in easily you need to be firm, polite and let on that you're willing to accept a partial reimbursement.
    So again the first step is to find out what is wrong.
    good luck

  • No Apple Store within 150 miles of me...what happens if I buy a Retina MBP and need the battery changed??

    I have a vintage 2006 17" MBP that has been a steadfast and reliable companion for years. It's aging, and will probably need replacing this year. I'm a wildlife artist and need something that accompanies me into the field, AND allows me to do a lot of image editing (Lightroom) at home and in the studio...so portability, horsepower, and screen size all matter.
    I'm deeply concerned about purchasing a Retina MBP, since there is no Apple Store closer than a 3 hour drive to me - if I need the battery changed, how the **** do I do that? I can't imagine living without a computer during the days it would take to ship something back to Apple galactic HQ for repair, and I also can't imagine how Apple can in good conscience design something so unserviceable. My current MBP went through the bulging-battery thing a year ago, so it's easy to conceive of something happening to a new machine.
    It's probably obvious, but I purchase the most I can afford at one time and then keep it for years before upgrading. I have to say I'm rather depressed about the current choices right now.
    Thoughts?? ...and thank you for reading!

    All MacBook Pro's come with Apple only servicable batteries now.
    However the newer batteries are much better than the older verisons and less likley to fail.
    For instance my 2 year old 17" has a 99% charge with only 14 cycles, but I'm  on power most of the time.
    Problem for you is the life of the charge and not being able to put in a replacement charged battery on extended trips in the bush.
    Also the Internet is required to reinstall the opearating system now, no disks.
    Since there is no Apple laptop that can meet your requirements without dragging a portable gas generator with you...
    I can only suggest you find a suitable PC laptop that can switch the charged batteries on location to keep on using it.
    I highly suggest Windows 7, it's more closer to what your used to using on the Mac far as operating systems UI goes.
    Windows 8 is a nightmare and it's adoption rate is very poor like Vista was.
    Perhaps you may think about getting a wonderful iMac for your office.

  • I need a manual for model SNPRC-0703-01 #CB022A-64003

    Hewlett-Packard Model SNPRC-0703-01 #CB022A-64003 I need a manual for this.  Thanks

    Hi @ma1221,
    Welcome to the HP Forums!
    I understand that you need a manual for your HP Officejet Pro 8500 All-in-One Printer - A909a. I am happy to help!
    Please visit this website, HP Officejet Pro 8500 All-in-One Printer - A909a User guides, and then you can download your user guide.
    Hope this is what you are looking for, and have a great day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Need User Manual for Firefox

    Need User Manual for Firefox.

    Hi hiddensmiles,
    We have a whole section here on [https://support.mozilla.org/en-US/kb/how-do-i-install-firefox-and-get-started Getting Started with Firefox]. It should cover all the basics from downloading and install to using the core features.
    If you have other questions, be sure to search the Knowledge Base. There is tons of great information there. If you can't find your answer there, you can always ask the volunteers here on the forums.
    Hopefully this helps!

  • Would like to use an alarm clock.  I need the alarm clock to function from the sleep mode.  A review said that MAC products will not allow a program to wake up a Mac.  Is this correct ?  Are there any products in the Mac store what will function from the

    Would like to use an alarm clock.  I need the alarm clock to function from the sleep mode.  A review said that MAC products will not allow a program to wake up a Mac.  Is this correct ?  Are there any products in the Mac store what will function from the sleep mode ?  How do I check this out ?

    You can set times for your computer to turn on or wake from sleep in the Energy Saver system preference pane using the Schedule... button.

  • I want ribbon cable for my compaq presario V6000 laptop

    I want ribbon cable for my compaq presario V6000 laptop: cable code is: AWM E118077 2896 80C VW-1 POWER RIBBON CABLE.
    where to get it from?
    Please help as i am unable to find this on online sites ,all are from USA,China etc.

    MaheshGupta wrote:
    I want ribbon cable for my compaq presario V6000 laptop: cable code is: AWM E118077 2896 80C VW-1 POWER RIBBON CABLE.
    where to get it from?
    Please help as i am unable to find this on online sites ,all are from USA,China etc.
    Cable code isn't going to help what you need the the cable part number. Without this no one will be able to help you locate the cable. Also you should tells us the P/N that will insure someone can look into what the part is and also what is that cable for as there is no discription what it does or connects to.
    How Do I Find My Model Number or Product Number?
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • Do I need the battery indicator?

    I'm having a repair done and they tell me the battery indicator is faulty.  Does it do anything more than just show battery life via the lights on the side?  Will the computer operate normally without it?  Will the onscreen battery icon still work?  Just wondering if I need to spend the extra $$.  Thanks guys!

    Hey Surface_Dweller,
    Thanks for the question. After reviewing your post, it sounds like you want to know what exactly the battery indicator does. I would recommend that you read this article, it may be able to help you.
    About the battery indicator lights on MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (Late 2008 and later)
    http://support.apple.com/kb/HT3205
    The battery indicator lights are located along the left side of the computer. This allows for quick and easy verification of the battery's charge status while the computer remains solidly in-place.
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • Need Service Manual for Tecra M11 PTME1U-048048.

    We have a Tecra with a bad RTC battery.  It needs to be replaced and I need the service manual for this laptop.  Can anyone help?

    Hi
    I dont know what you mean exactly saying; hatch to give access to the hard drive but the notebooks HDD is placed at the bottom of the unit.
    You can easily remove the cover which secures the HDD bay in order to get access to the internal HDD
    Greets

  • Automatic Conversion of PR to PO.. Need User Manual for ME59 T code

    Hai Sap Gurus,
    I Got the following content from net. but kindly help me by sending me user manual for ME59.
    You created purchase requisition for various material. During creation of purchase order you used the following path:
    Purchase Requisition
    .......Follow on function 
    .........Create Purchase Order
    ............automatic via purReq. 
    When you mentioned required purchase requisition number and execute, system give error that purchase requisition does not contain any suitable item. 
    Is there any setting in customization where you can monitor and use that function.
    In an effort for you to successfully use the Transaction Code ME59 to automatically convert the current PR into PO, then the following criteria should be met: 
    1) In the Purchasing View of the material master data, the "Autom. PO" field must be clicked; 
    2) In the Purchasing View of the Vendor Master Data, the "Automatic Purchase Order" field must be clicked; 
    3) The Outline Agreement or Purchasing Info Record shall be maintained which will allow the automatic copying of unit price and other conditions into PO; 
    4) The Source List shall be maintained for the nominated vendor which was shown in either the Outline Agreement or Purchasing Info Record. 
    or 
    it might be PR subject to release strategy and not yet released
    or 
    If you're not using a source list or automatic creation of PO, you may need to assign the requisition to a purchase information record using transaction ME56. Then it should appear in ME58
    Thanks.. Reply me pls...
    Edited by: Swetha SAP Girl on Jun 18, 2009 2:19 PM

    Hi,
    Step by step process for automatic  PO creation from PR
    1.  Tick check box in purchasing view of Material Master(MM01/MM02)
    2.  Tick check box for auto PO in purchaisng data of Vendor Master record (MK02)
    3.   Maintain Source list for Material,plant and Vendor combination in ME01
    4.   In ME51N create PR and assign source of supply in "Source of supply" tab
    5.   In ME59N key in Purchaisng Org., Vendor and Plant - execute
    You will get POs created with reference to PR automatically.
    Hope its clear
    Regards,
    Uzair Hussain

  • Need User Manual for CT-4870 C

    Anyplace I can get a user manual for a Sound Blaster CT-4870 Sound Card?
    Link will do if that is all there is. I tried the knowledge base at this web site and just kept going in circles.
    I'm specifically interested in the in/out sockets. I figured out the mic and speaker ones but there are others that I need to understand whether they are line in, or line outs and if they are standard /2 mini plugs (3 ckt) or those fancy multi-pole type things.
    DMK

    Unless you can find something on HP's site (the CT4870 is listed as a HP OEM card, Sound Blaster Li've! Value HP / NEC - CT4870), this is about the closest you're going to find,
    http://us.creative.com/support/downloads/download.asp?bEOSLAgree=yes&action=next&OS=0&regio n=&Product_Name=Li've!&Product_ID=4857&driverlang= 033&drivertype=2&MainCategory=

  • Need user manual for NI DAQPad-6016

    Need a user manual for the NI DAQPad-6016.  When I download the E_Series_Help.chm file off the NI website and run it, I get the following message: 
    Action canceled
    Internet Explorer was unable to link to the Web page you requested. The page might be temporarily unavailable.
    andy-l

    Laura:
    Thanks for the info!
    I have submitted feedback a couple of times to the effect that I prefer PDF documentation.
    I was not aware of the uncompiled help files. Are these generally available any time the compile help file is used? They are helpful in that I can view them on my Macintosh. I still prefer the more book-like PDF format, though.
    I am downloading chmMagic to give it a try.
    Thanks for the help! There's so much stuff on NI's web site it can be hard to know what's available and how to find it.
    John Weeks
    WaveMetrics, Inc.
    Phone (503) 620-3001
    Fax (503) 620-6754
    www.wavemetrics.com

  • Need serive manual for HP Designjet 1200ps.

    Hi Friends,
    Could anyone please help me in getting the service manual for DJ1200ps. I need the service manual & not user manual.
    Thanks
    Anil

    This forum is focused on consumer level products.  For the Designjet you may have better results posting in the HP Designjet forum here.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Maybe you are looking for

  • Account debited at wrong rate

    hello, When making a call to a mobile phone in the UK I noticed that immediately as the phone call was answered - my account's credit was lower at a much higher value than the cost of a 1-minute call. what's the reason? I hereby attach a screenshot o

  • Error when updating 11.1.0.6 to 11.1.0.7 with manual method

    I'm trying to upgrade our RAC install from 11.1.0.6 to 11.1.0.7 and everything has gone smoothly up until the point that I need to upgrade the actual database. I'm following the readme about how to upgrade via manual method and when I get a problem i

  • Catalyst 3750 24FS-S Initial Setup help please

    First time with Cisco and with Fibre, so a double whammy! I would appreciate some help from the community from someone with experience setting up a 3750 24FS Switch I have WS-C3750-24FS-S fibre switch that I have inherited In good working order but f

  • Why won't my Apple TV3 connect to my shared library?

    Okay, I have an iMac, a iPhone 4S, an iPad3 and an Apple TV3. Accessing my shared iTunes Library from my iPad and iPhone works fine.   However for the last month or so (presumably since a software update) my Apple TV just will not connect to my Share

  • Standard system settings

    Hi all, Could anyone tell me what all <b>settings</b> we need to do when we setup a system?(dev/test/cons/prd Any SAP Notes or documentation available related to standard system settings? Thanks in advance and best regards, Sundar.