I previously used Indesign CS4. I now have recently purchased Indesign CC. I have a Mac Yosemite 10.10.3. When I print, I cannot select my paper stock, other than what is in the print dialogue box, i.e. art paper. In Indesign CS4, I could choose fine art

previously used Indesign CS4. I now have recently purchased Indesign CC. I have a Mac Yosemite 10.10.3. When I print, I cannot select my paper stock, other than what is in the print dialogue box, i.e. art paper. In Indesign CS4, I could choose fine art paper etc. Where can I find this option in this new version?

With Snow Leopard, the Printing of PDFs has changed. Try using the highlighted option

Similar Messages

  • I have recently purchased a macbook 2010, have downloaded os x but it hangs during set up.

    I have recently purchased a macbook 2010, while trying to set it up after downloading  os x it hangs (rolling beach ball). I have forced shutdown several times as it gets partially through set ups and then it hangs until i have to force quit again. Can anyone tell me if this is a software or hardware (processor) problem... thanks in advance for your help.

    that is correct - what works in you ipad/iphone will not work in your macbook
    i bought pages for my ipad/iphone - it works on my ipad and iphone but will not download and install in my Macbook

  • When adding music other than what comes with the theme; can you choose a specific section of the music

    I have added a song to replace the Revolution's theme music.  Is ther a way to set a specific section of the song to play instead of the entire song?

    Not with iTunes.  If you want a specific part of a track you should edit a copy of the track with a 3rd party audio editor to leave just the portion you want.  Then import that clip into iTunes and use in iDVD.
    OT

  • Bought Premier Elements yesterday. EVERY time I try to open a set of clips with Editor, I am told I have to sign into my Adobe first. I do this and wait for several minutes for the password dialogue box to open, enter my password. then wait and wait until

    Bought Premier Elements 13 yesterday. EVERY time I try to open a set of clips with Editor, I am told I have to sign into my Adobe first. I do this and wait for several minutes for the password dialogue box to open, enter my password. then wait and wait until my pw is recognized. Accept agreement. Agreement screen disappears and I'm back where I started. Try to open video clips with editor again and get the same demand to log in. Please advise asap. thx

    Oldcameraman
    Please do not duplicate a thread. The threads are answered as soon as possible. We are not Adobe. Just user to user.
    I have answered your most recent of the duplicates
    Premier Elements 13 Organizer Works. Editor doesn't. Log in doesn't work
    It is uncertain just how far we can go to help you since you do not appear to have Premiere Elements any
    longer.Seems you demanded a refund from Adobe Chat, got it, and now are left with a non purchased program which I
    am not sure can be used.
    Duplicates tend to confuse the person asking the question as well as those attempting to reply. As I suggested in the
    above mentioned thread, try to sort out your situation with Adobe via its Adobe Chat.
    ATR

  • I have started having problems with the png dialogue box in Photoshop cs6

    When I go to save the image I am working on, the PNG Dialogue box is black , I mean that the radial and submit buttons show up but the rest is just black so i cannot see exactly what I am doing. I cannot work out how to fix this and would really like to avoid a total reinstall of my CS6 package.
    This issue does not happen using the PSD or JPG save options either so i am baffled.
    Kind Regards
    William
    PS- Does anyone know if it is still possible to talk directly to Adobe via thier live chat option as I could not find it when I wanted to inform them of this directly

    I am using OS X Mountain Lion. I really dont want to have to reinstall anything. An OS Reinstall is really no less annoying than a Reinstall of the CS6 package. Sadly it looks like this may be the only way forward. Just hope I can do it without losing too much from the machine as it is my work machine.
    Thanks for your help and for the link. I just wish Adobe was more directly contactable about issues that come up when using their products.
    William

  • I have a MacBook Air and for what ever reason, the print settings have gone out of whack. I am not sure how to set to print a normal A4 paper size or a standard envelope. These settings were working O.K., but not now

    I have a MacBook Air and for what ever reason the print settings for envelopes and normal A4 paper size changed from printing correctly each time I wished to print. Now, each time I wish to print either, I have to rest paper size and or Envelope vertical or horizontal. Can anyone assist with how to reset in order to print correctly without the need to rest each time please?

    Log in to the Developer forum. You will find instructions on how to install the lastest beta. Your problem is the beta you have installed has expired. All of them did on October 5; you will find hundreds of threads discussing this. If you have a beta it is assumed that you will continue as a beta tester, so a simple update using iTunes will not work.
    If you no longer want to be a beta tester install the GM 7.0.2 by restoring from iTunes using DFU mode.

  • When I try to install extensions into Dreamweaver CC, I get the following dialogue box in the Extens

    When I try to install extensions into Dreamweaver CC, I get the following dialogue box in the Extension Manager CC:
    "Failed to update database. The extension will not be installed."
    What may the problem be?

    Good day to all,
    The problem that we were having was caused by a case difference between two folders, like Carl pointed out. The line that created the issue was written like this:
    <file source="File1.htm" destination="$dreamweaver/Configuration/Shared/MyExtensions"  />
    <file source="File2.htm" destination="$dreamweaver/Configuration/Shared/myExtensions"  />
    The correct folder was with an upper case ("MyExtensions").
    The extensions are now installing correctly however it seems to take significantly longer to install than on previous versions of EM (even previous version of EM CC). Has anyone been experiencing the same long install time? This only happens on Windows OS. On Mac the extension is installed pretty fast.
    Any idea how I could lower the install time? We do have a long list of files. Maybe try to use only folders instead of individual files?
    Cheers,
    Andrei

  • Windows 7 "Save As" hangs in the common dialogue box

    All attempts to Save As hang when the common dialogue box comes up.
    This hanging occurs with all the Office 2013 programs, custom applications, the lot.
    It hangs before I get a chance to key in anything.
    All Windows Updates done, Registry Booster says the registry is error free, Microsoft Security Essentials detects nothing, etc, etc.
    I have tried several of the suggestions available from the Internet, none of them fix the issue.
    From this Forum I see that this has been a problem in the past.
    How can I pin down what is actually going wrong please!
    Mike Southwark
    20.01.2014
    MS

    Hi,
    This issue can be caused by network locations or printer configuration in your Office.
    Please test the steps in following articles:
    Microsoft Office stops responding when you try to open or save a file
    https://support.microsoft.com/kb/313937/en-us
    Excel hangs or becomes unresponsive when saving or closing a workbook
    http://blogs.technet.com/b/the_microsoft_excel_support_team_blog/archive/2012/04/12/excel-hangs-or-becomes-unresponsive-when-saving-or-closing-a-workbook.aspx
    If the issue still persists, please help to collect the event log and app crash dump file and upload here for further research.
    First enable app crash dump collection by copying following words into notepad, saving it as dump.reg and importing it:
    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Windows Error Reporting\localdumps\EXCEL.EXE]
    "DumpFolder"=hex(2):63,00,3a,00,5c,00,63,00,72,00,61,00,73,00,68,00,64,00,75,\
      00,6d,00,70,00,73,00,00,00
    "DumpCount"=dword:00000010
    "DumpType"=dword:00000001
    "CustomDumpFlags"=dword:00000000
    Then, open Excel to repro the issue. If crash issue appeared, please find the crashdump file under c:\.
    Please upload this file into Skydrive and shared the link here.
    Also, you can try to analyze dump by yourself if you would like to：
    How to analyze app crash dump file:
    http://blogs.technet.com/b/askperf/archive/2007/05/29/basic-debugging-of-an-application-crash.aspx
    Wait for your response.
    Kate Li
    TechNet Community Support

  • Metadata edited in Bridge is not reflected in the Info Dialogue Box, but shows up in Photoshop.

    Metadata edited in Bridge is not reflected in the Info Dialogue Box, but shows up in Photoshop.

    Dear Ramón,
    You are right that not all metadata is shown in the Finder info but in my case the once added in IPTC core do show as expected for most file types (but not CR2 raw). As you now I convert my CR2 to DNG for a long time now I had to look up the original Raw file and create the data for description, location, keywords again. The data you can add and alter yourself in the IPTC Core field. I added a series of screenshots showing different info and to my surprise (another reason to keep to DNG…) the Raw file had very less info and the xmp shows it all in a rather long and obscure way. Yet PSD, DNG and File info in PS show the same.
    Could not recreate the Bridge metadata workspace from the OP because mine (Bridge CC) does not have the description field as an option anymore for some obscure reason. Also checked this in my CS6 version with same result, making the metadata workspace unusable but that was it already for a long time.
    Still leaves us with the problem the OP showed, having all info in most files, as in Finder info, but not in Bridge. So could the OP respond to the purge cache for selection option in post 4?
    Here are (a bit to many, sorry) my screenshots showing different file info (in Dutch but you will manage with that) and metadata in Bridge:
    Finder info for PSD and DNG:
    Finder info for CR2 and XMP:
    File info Bridge / PSD:
    And a Bridge Metadata view:

  • How to continue the running process behind the model dialogue box options ?

    How to continue the running process behind the model dialogue box options like this
    In Updation of K7 user press the Cancel Button
    New dialogue box appear with Yes/No options.
    But the backend updation is going on... not Pause the updation.
    Like this how to do ?
    Please provide me code.

    I don't know, if you mean you have done your form or you have solved the problem.
    It's visible your code is only partly reflecting your screenshot, and that's okay to demonstrate the problem you have given a fine example.
    As you marked my suggestion as solution this may not be needed anymore, but here's how I modified your code and used a self made QuestionBox instead of messagebox.
    The essential part is defining a callback method and letting the QuestionBox call back there. It's not essential I used RAISEEVENT, but it's fine as it has all the behaviour and parameters needed to call back.
    Public oTestFrm
    oTestFrm=Createobject("MyForm_Model_to_NonModel")
    oTestFrm.Show
    Define Class MyForm_Model_to_NonModel As Form
    onxx = 0
    Add Object lbl_DispValue As Label With Top=90, Left = 120, Width = 50, Height=30, Caption=''
    Add Object cmd_Start As CommandButton With Top=120, Left = 120, Width = 50, Height=30, Caption='Start'
    Add Object cmd_Stop As CommandButton With Top=120, Left = 190, Width = 50, Height=30, Caption='Stop', Enabled =.F.
    Procedure cmd_Start.Click
    This.Enabled =.F.
    Thisform.cmd_Stop.Enabled =.T.
    Thisform.onxx = 0
    Do While Thisform.onxx < 90000000
    DoEvents
    Thisform.onxx = Thisform.onxx +1
    Thisform.lbl_DispValue.Caption = Transform(Thisform.onxx)
    Enddo
    This.Enabled =.T.
    Thisform.cmd_Stop.Enabled =.F.
    Thisform.lbl_DispValue.Caption = ''
    Procedure cmd_Stop.Click
    * Here, I want NO PAUSE -- (Show running numbers continuously...)
    * how to control Model to NonModel in Messagebox.
    QuestionBox('Really stop the process', Thisform, 'handleanswer')
    Endproc
    Procedure handleanswer
    Lparameters tlYes
    If tlYes && means Stop
    Thisform.onxx = 99999999999999999
    Endif
    Endproc
    Enddefine
    Procedure QuestionBox()
    Lparameters tcMessage, toCaller, tcCallback
    If Not Pemstatus(_Screen,"oForms",5)
    _Screen.AddObject("oForms","Collection")
    Endif
    oMsgBox = Createobject("QuestionBoxForm", tcMessage, toCaller, tcCallback)
    _Screen.oForms.Add(oMsgBox)
    oMsgBox.Show(2)
    Endproc
    Define Class QuestionBoxForm As Form
    Autocenter = .T.
    AlwaysonTop = .T.
    Minwidth = 200
    Add Object label1 As Label With AutoSize=.T., WordWrap =.T.
    Add Object cmdYes As CommandButton With Caption = "Yes", Width=40
    Add Object cmdNo As CommandButton With Caption = "No", Width=40
    Procedure Init()
    Lparameters tcQuestion, toCaller, tcCallback
    Thisform.label1.Caption = tcQuestion+" ?"
    This.AddProperty("oCaller",toCaller)
    This.AddProperty("cCallback",tcCallback)
    This.Width = Max(This.Minwidth, Thisform.label1.Width)
    Thisform.label1.Left = (This.Width-Thisform.label1.Width)/2
    This.Height = Thisform.label1.Height+48
    This.cmdYes.Left = This.Width/2 - 10 - This.cmdYes.Width
    This.cmdNo.Left = This.Width/2 + 10
    This.cmdYes.top = Thisform.label1.Height+24
    This.cmdNo.top = This.cmdYes.top
    Endproc
    Procedure cmdYes.Click
    #Define clYes .T.
    Raiseevent(Thisform.oCaller,Thisform.cCallback,clYes)
    Thisform.Release()
    Endproc
    Procedure cmdNo.Click
    #Define clNo .F.
    Raiseevent(Thisform.oCaller,Thisform.cCallback,clNo)
    Thisform.Release()
    Endproc
    Enddefine
    I didn't yet introduced a timer for counter display updates. As you see the counter hangs a bit, if you mouse over your form, but it is a way of multithreading without using a separate thread and instead keep the rest of the application active by DOEVENTS
    in the long running loop code.
    Bye, Olaf.
    Olaf Doschke - TMN Systemberatung GmbH http://www.tmn-systemberatung.de

  • I keep getting the same dialogue box upon opening Firefox but don't know what to do about it

    I keep getting the same dialogue box upon opening Firefox but don't know what to do about it "Could not initialise the application's security component. The most probable cause is problems with files in your browser's profile directory. Please check that this directory has no read/write restrictions and your hard drive is not full or close to full. It is recommended that you exit the browser and fix the problem. If you continue to use this browser session, you might see incorrect browser behaviour when accessing security features." I have gone to tools - general tab - browse files - but it wont let me browse or set a place to staore files. Any ideas?

    Try the procedures shown in this link - https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component

  • I am trying to softproof an image using a CMYK .icc file. I sent an image from LR 5 to PS CC 2014, opened the Camera Raw FIlter, but the hyperlink to access workflow is not showing up in the CR dialogue box... Any ideas why this might be?

    I am trying to softproof an image using a CMYK .icc file. I sent an image from LR 5 to PS CC 2014, opened the Camera Raw FIlter, but the hyperlink to access workflow is not showing up in the CR dialogue box... Any ideas why this might be?

    I am trying to softproof an image using a CMYK .icc file. I sent an image from LR 5 to PS CC 2014, opened the Camera Raw FIlter, but the hyperlink to access workflow is not showing up in the CR dialogue box... Any ideas why this might be?

  • HT203421 I have recently purchased some apps from the app store and after downloading them, the icon that appears in the dock changes to a different icon. It is now the same icon appearing on all newly downloaded apps.  Does anyone know what is happening

    I have recently purchased some apps from the app store and after downloading them, the icon that appears in the dock changes to a different icon. It is now the same icon appearing on all newly downloaded apps.  Does anyone know what is happening here? Even updating an older game app resulted in the original game icon changing to the new identical icon that all new apps are appearing with.  This new icon is like a page with a ruler, pencil and paintbrush. Any tips on how to stop this or how to revert to the icon as it appears on the app store would be appreciated.

    https://discussions.apple.com/thread/6132949?tstart=0

  • I have recently upgraded to mavericks and I cannot get my scanner to work.  I tried deleting the printer and reinstalled it but no luck

    I have recently upgraded to mavericks and I cannot get my scanner to work.  I tried deleting the printer and reinstalled it but no luck

    Canon does not support the MP530 on Mavericks, they have not produced drivers and apparently do not intend to,

  • Can anyone help me create a relink script to simply open up the relink dialogue box?

    Can anyone help me create a relink script to simply open up the relink dialogue box?

    the "Relink" command uses the same dialog as the "Place" command, with the exception of having the "Replace" option checked...so, use Ctrl+Shift+P to bring up the Place dialog, select your new image then check the "Replace" check box.
    if checking "Replace" with the mouse slows you down, after selecting your image, press "tab" key 3 times to switch focus to it, then press space bar to check it, then ok to place.

Maybe you are looking for