Im trying to switch my samsung intensity for a LG octane because I lost my intensity.

When I try to input the Device ID for the LG octane, i click enter and a window pops up saying this phone requires me to change my plan. It's a basic phone so I don't understand why it's telling me this. Help!

Your best bet is to call customer service and have them make the switch. you can also try dialing *228 on the Octane (with your Intensity OFF; though if you lost it, you don't know if it is off or not....) and choose option 1. Enter your phone number at the prompt; it will either activate, or tell you to contact Customer service for further help. At one time, I was automatically connected to CS if there was an issue activating...

Similar Messages

Switch on the OIM for archived transaction with RFSEPA02 program

Hi all,
i have tried to switch on the OIM for archived transaction with RFSEPA02 program but it saying error.
it can not be possilbe change OIM for archived transaction in GL account.
is there any otherwise to switched on OIM for acrchived transaction.
Regards,
Veerababu

HI,
I believe, it won't be possible. Also, please note that RFSEPA02 report is no longer supported by SAP as its execution causes inconsistencies in the system (see note 175960 for further info).
Regards,
Eli

When I was talking on phone, suddenly the phone was switched off. i tried to switch it on but it gave the message....connect to itunes for set up. when I connected it to itunes...it gave the message, itunes can not read data from this iphone, restore it

when I was talking on phone, suddenly the phone was switched off.
i tried to switch it on but it gave the message....connect to itunes for set up.
when I connected it to itunes...it gave the message, itunes can not read data from this iphone, restore it to factory settings. It also said while restoring ypu will lose all media data but you can restore the contacts.
I restored the factory settings....the phone was on recovery mode...it was verified by itunes and all that..but in the end it again said that iphone has some problem and can not function right now.
after that when ever i connect it with itunes, it gives the message, it can not activate the iphone further, try again later or contact customer service.
What to do now?????? Customer service people say..it is hardware problem

If it's a hardware problem, then the phone will need to be replaced.
There is no magic that can fix a hardware problem.

Hi I Have A Prepaid SmartPhone Right Now With Verizon For About 7-Months So Far. I Have Always Paid On Time No Missed Payments Good Standing Account, I Tried To Switch Over To A 2-Year Contract With Verizon And They Wanted A $400 Deposit For Only 1-Line.

Hi I Have A Prepaid Smart Phone Right Now With Verizon For About 7-Months So Far. I Have Always Paid On Time No Missed Payments Good Standing Account, I Tried To Switch Over To A 2-Year Contract With Verizon And They Wanted A $400 Deposit For Only 1-Line. Is There Anyway I Can Use My Excellent Payment History With There Prepaid Department To Switch To A 2-Year Contract And Not Have To Pay The $400 Deposit. And This Is Due To The Fact I Have No Credit History Whatsoever

Since you have no credit history, my guess is you would need at least a year of on time payments, and I'm not sure a pre-paid account would qualify as you can stop at any time.
You didn't specify your age, but getting started int he credit world is not easy - you may try applying for a gas card, or a credit card, and USE them, pay them off each month - and expect to take a year or more to establish a record.

Replacing my HDD in my Early 2011 Macbook Pro...Trying to decide between Samsung 840 EVO 250 gb and Crucial M500 240 gb. Samsung is faster but less "mac-friendly". Should I opt for the Crucial due to the "mac-friendliness"?

I have a S.M.A.R.T error on my current Hitachi drive that came with me Early 2011 Macbook pro. Want to upgrade to SSD.
Trying to decide between Samsung 840 EVO 250gb and Crucial M500 240gb, at this gb range, the Samsung is faster and uses less wattage....ONE PROBLEM...I have read many user experiences that note it is much less mac-friendly...
The software samsung offers is not IOS compatible and some report lower than expected speeds after installation...Also apparently the RAPID MODE of the drive, the fastest drive mode is nonexistant when installed on a Macbook pro?
Should I opt for the slower and more power cosuming Crucial M500 240gb SSD because it is more Mac-friendly? Does anyone have a Samsung 840 EVO 250 gb SSD installed in their macbook pro? What has been your experience?
Thanks ahead of time!
Resoure: http://www.tomshardware.com/reviews/crucial-m500-1tb-ssd,3551.html

I decided against the Evo as there are too many Mac users that have had issues with slow speed on them. Even without these, the main speed that Samsung states for the Evo comes form turbo Write which is a PC only feature as is software dependent.
I'm sorry but Crucials M500 is simply too slow compared to modern drives to be recomended. Read speed is ok, but the write is far too slow for the price.
I've used and installed both a Samsung 840 basic and a Samsung 840 Pro in 2 separate Mac books! and currently have the 840 Pro in my own MacBook Pro and it comes very highly recomended. It's all but the fastest Sata III drive you can buy - A few OCZ drives just edge it but the difference is negligible. Samsung by far have the best reliability though when it comes to SSD's. I've been getting 520Mb/s easily on mine consistently, and without getting a MacBook with a PCIe drive you won't get a faster more reliable drive.
I really would recommend nothing else.

My Led flash light switch on all the time,anybody got the solution.i tried 3 things but it couldn't solved the problem. 1.settings-accessibility-LEd flash off   2. Switch off the phone for several times. 3.press the home button n power button until the

My Led flash light switch on all the time,anybody got the solution.i tried 4 things but it couldn't solved the problem. 1.settings-accessibility-LEd flash off   2. Switch off the phone for several times. 3.press the home button n power button until the apple logo appears. 4.reset my all settings.

My Led flash light switch on all the time,anybody got the solution.i tried 4 things but it couldn't solved the problem. 1.settings-accessibility-LEd flash off   2. Switch off the phone for several times. 3.press the home button n power button until the apple logo appears. 4.reset my all settings.

Im trying to switch my credit card info on my ipod touch, and i already changed it on itunes... any help for me? (:

im really getting aggravated with this problem. im trying to switch my credit card info on my ipod touch from my aunts info to mine, and i just cant get it to work. does anyone know anything about this?? please please help!! its greatly appreciated...
shannnn <3

Click here and request assistance.
(87754)

Horrible experience trying to exchange/return Samsung S5 at store #457

So I have had a family plan with sprint for over 10 years now, have 5 lines and alway ls do an upgrade when it's up.
This time one of my line is up for an upgrade so went from my iPhone 5 to the Samsung S5. Great phone lots of features to get used to but phone i originally purchase at location 472 in Union nj, was faulty as I seem to not be able to hear people on the other side of the phone.
Bought the phone on July 6th, did the software updates needed one I got home and went to work like normal, threw out the day got onto using my phone which seem of cause I could barely hear them and they could barely hear me, so went to the store in Rockaway nj to exchange it or return it if need be on July 12th.
Only to find out that best buy doesn't honor their written return policy.
Was turned away dismiss that the phone had any issues, the call volume was fine and issue was the life proof case I bought with it, even after we tested without the case still they found the phone to be working fine volume call level. They would do a swap fora new unit but if I still had the same issue with the new one they wouldn't refund the phone, even thoughi was with in the 14 day return period.
Have bought stuff from best buy for years now, but no more.
Not looking to buy into headaches, I want to spend my money on stuff where there is peace of mind, knowing if something is wrong and with in return or warranty guidelines I will be taken care off.
Manager on duty have me a online support number that dreams with online order as to deal with customer issues.
This place is a joke, they mistreat clients as they know nothing Will happen and they are giving out wrong information, called that number and they claim they don't have a corporate office or customer relation number, or a regional office number.
Last time I ever set foot in one your stores or buy stuff from your company at all, wasted an hour explaining the issue at store level with no results turning me away toa different store cause I didn't buy the phone there, wonder is I was to buy something there would they also tell me to go buy it at another site.
Wasted another hour on phone that was given by employee at the store to find out they couldn't do anything cause they deal with online orders only, answer I got was go to place where you bought it from, I bought it at best buy, should be able to return it at any best buy, even the moon if they had one there and that wad the closest to me.

Hello anthopadilla,
Cell phones can definitely be a blessing or a curse at times. I speak from experience. From what I hear, the Samsung Galaxy S5 is a great phone! I’m sorry if you have been inconvenienced by the issue you are having with the phone and its case. Considering the time you have invested into this, I would be equally as upset. I hope to provide you with some clarity around the communication you received in store and when speaking with our phone agent.
I am glad to hear the store went through the proper steps in testing the phone for you with, and without, the case on the phone. It sounds as though the store exchanged the phone for you even though they were unable to find anything to be wrong with it. The information you received from our phone agent was correct; our support teams do not have the ability to initiate a return for an in store purchase when assisting you over the phone or online. However we may help connect you with the necessary parties at the store level. You should be able to return your store purchases to any Best Buy location in the country, not just the original purchase location. For more information on our Return & Exchange Promise, click here.
The store may have been trying to inform you they would not swap another phone for this same issue, because it is likely you will receive the same result in lessened volume levels as long as you are using that case with for that model phone. I apologize if this was not communicated appropriately by the store employee. I recommend looking into other cases if you are unhappy with the effect it has on your phone’s speaker, rather than looking to perform an exchange on the hardware itself.
I will ensure your feedback is passed on to the leadership at the Rockaway, NJ location. Please let me know if you have any additional questions or concerns. We appreciate your business and I hope you will continue to come to us with your future needs!
Respectfully,
JD|Social Media Specialist | Best Buy® Corporate
Private Message

I have just switched to samsung and i have removed the sim from the iphone however i am still receiving texts rather 'imessage' on the old iphone. how do i make sure all messages only come to my new phone??

i have just switched to samsung and i have removed the sim from the iphone however i am still receiving texts rather 'imessage' on the old iphone. how do i make sure all messages only come to my new phone??

You can turn iMessage off on your iPhone. That's relatively easy. Since iMessage is an Apple product/service, I have no idea how a Samsung phone will deal with an incoming one. For that answer you should probably contact Samsung support.

Software Update Point Switching is not working for some Clients

Hi there,
I found nothing similar here and I hope this is the right section.
I´m running ConfigMgr 2012 R2 where one of the Site Systems from one of the Primaries is located in an untrusted Forest in a perimeter Network. The Site System there has the MP, SUP and DB Roles. In general it works great. The Systems in that untrusted Forest
get the SCCM Agent pushed, see and can install published Software packages and receive Windows Updates. But there are a few systems where everything works, except Windows Updates.
So I had a deeper look at what is happening and found out that the SUP switching is not working for them. They always try to contact the SUP from the Primary, which they cannot reach (this is intended).
From how I understand SUP switching as described here
http://blogs.technet.com/b/configmgrteam/archive/2013/03/27/software-update-points-in-cm2012sp1.aspx#pi140062=1
the Windows Update Agent tries to connect to a SUP every 30 minutes and after 4 failed attempts he will try to connect to the next one until he finds one which works.
As I said before, this seems to work for most systems in the untrusted forest, but some do not make any intentions to switch the SUP.
So my next step was to find out from where the Update Agent can get the information of the available SUPs. I think they either don´t receive the information that other SUPs exist, or if the Information is there, they don´t realize that there´s an error and
make no attempt to switch.
I used the System Center Support Center to gather all Information from some of the systems with that problems (Log Files, WMI information, registry information, policies etc.) but I cannot find where SCCM or the Update Agent store the information which SUPs
are available in my environment.
I´m sure the problem is on the Systems which fail to connect to the right SUP and not in the SCCM infrastructure itself, because for most of the systems everything is working just perfect. Unfortunately in the Blog Post above there´s also no information
where this information is stored and how it is obtained by the clients. In the comments there´s even one post which describes the same problem I have here, but there was no answer. I hope someone can point me into the right direction, because I´m stuck currently.
Things I tried additionally to all the log file / WMI / registry sniffing:
Removing the Software Distribution Folder and restarting the Windows Update Agent
Removing the WindowsUpdate Registry folder in the HKLM\SOFTWARE\Policies\Windows section in the Registry and restarting the Windows Update Agent.
Tried to reset the WUAgent with wuauclt /Resetauthorization additionally to the steps above.
I also tried to manually set the WUServer and WUStatusServer Keys in the registry to the new Server, but as soon as the next Update Scan cycle runs, the value is set back to the URL of the Primary Sites SUP
Is someone having additional ideas? It seems to me older systems are more affected (which were configured for a standard WSUS before SCCM 2012 was deployed) than newer ones which were installed when SCCM was in place already. But I don´t know what else to
"reset" on those machines without reinstalling them.

Thank you very much for your response. I must have missed that one by looking through numerous Logfiles. In this, there´s indeed a list of all available SUPs. So according to the LocationServices.log the machine should have a choice.
The WMI Key however, contains just one entry and this is the URL of the Primaries SUP which is not reachable in the untrusted forest. Is it OK that the WMI entry includes only one entry? If yes, what process is putting the results from the LocationServices
into WMI? It seems like the Windows Update Agent is feeded from the WMI Key then. If this is the case my problems seems to be the "communication path" between these two components.
Is this the job from the SCCM Agent, the Windows Update Agent or maybe some third component I´m not aware of? I wonder how I can fix this.

Trying to switch to kde but...

So I'm trying to switch to kde not because I dislike gnome but because I'm curious about kde. So far I've had a few issues that keep me going back to gnome where I haven't even had to deal with this problems.
I have a Thinkpad X201 which is a small laptop (12.1 inch screen). When I get to work I dock and close the lid and use a 21 inch screen. The laptop screen is off. When I un-dock it, it seamlessly switches back to the laptop screen. I didn't have to do anything to get this to work in gnome other than set it up under the display settings. KDE, I have to configure it on each boot, and it seems a little buggy sometimes (as in it doesn't do the same thing each time even though I go through the same proceedure, like the laptop monitor says even when I say to disable it, until I re-enable it and disable it a second time). It doesn't always happen but it does sometimes. I know I can default it to one setting but when I un-dock it or reboot it with the external monitor as default it doesn't go back to the laptop display like gnome does (which mean I don't get a screen on my laptop to switch it back to the laptop). I went through the intel/xorg/kde wiki's and either I missed it or it doesn't really say anything about my situation. I saw the multi-monitor settings for xorg and tried it but it did nothing.
This alone make kde not an option as I'm constantly going back and forth from docked to un-docked and can't keep manually switching display settings.
Also, I tried my vm's in virtualbox and it complained as I started the vm that it was configured for 32 color but that kde is set to 24 bit. I see no settings to change it in kde and forcing it with an xorg config file does not take. How do I change it to 32bit color?
Some of the other quirks I can sort of deal with (clock size, qt/gtk integration, others) but those above will keep me gnome until they can be solved.
$ lspci
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:19.0 Ethernet controller: Intel Corporation 82577LM Gigabit Network Connection (rev 06)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06)
00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 06)
00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 06)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 06)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06)
02:00.0 Network controller: Intel Corporation Centrino Advanced-N 6200 (rev 35)
ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)

The problem I'm having is more extreme than yours but possibly related. (There's a thread here somewhere and a forum thread on the KDE site.) I need to sit down and try to recreate the issue in my office.
Apart from the configure-every-time on connect and configure-twice on disconnect, I also tend to find I lose all display on disconnect (not immediately but shortly after). Either ll display for X or all display period.
It is probably the biggest issue I have right now (apart from the new kernels - but the lts one works great).
Possibly related:
https://bugs.kde.org/show_bug.cgi?id=291819
https://bbs.archlinux.org/viewtopic.php … 0#p1079700
http://forum.kde.org/viewtopic.php?f=22&t=101058
There are some other bugs/threads on the KDE sites if you search...

I am trying to switch laptops with my mom, and successfully wiped mine and restored it, but now her password won't allow her into my computer, even though it says it's her account. Is there any way to bypass the password screen?

I am trying to switch laptops with my mom, and successfully wiped mine and restored it, but now the password that she used on her computer isn't working on this computer. Is there any logical reason why the two passwords would be different, if I restored her information from a Time Machine backup? Aditionally, Is there a way to bypass the password page on startup to make a password that my mom knows?

If Disk Warrior does not work you can try the following steps (but they may not work if the disk has a hardware error).
Get the disk (DVD or CD) that came with the system (since you have it listed as 10.6.8). If it is 10.7 or 10.8 use the Recovery partition to boot from or the USB installer if you have that option.
Insert the disk then power down
HOLDING the C key, power up to boot from the disc.
Get to Disk Utility
If Disk Utility will now show your hard drive, use DU to REPAIR the disk.
When it completes the Repair process successfully as indicated in DU, do a shut down. If Repair is not successful then an different course of action is indicated below.
Then HOLDING THE APPLE (or Command key depending on your keyboard) KEY AND THE OPTION KEY AND THE LETTER P AND R KEYS, continue hiolding them until you hear the chime tone for the THIRD time then release all four keys.
If REPAIR is not successful, use the Install disc as a boot and REINSTALL THE OS X OPERATING SYSTEM DO NOT ERASE THE DISK OR VOLUME FIRST. REPEAT DO NOT erase the disk or volume before trying to reinstall the OS X operating system. After re-installing the OS do a software update. Note that ERASING the disk is NOT required to do an OS re-install. This allows your existing data and application files to remain.
If that fails then you are down to the "bitter end" of erasing the volume and reinstalling the OS and then all the other software.
If erasing the Volume fails then your last hope is to completely erase the entire hard drive, repartion the disk and try a re-install.
If that fasils then you may have a defective hard disk.

HT5621 When I got my new iPhone and was trying to switch everything over I accidentally set up a new icloud account with one email and had one on my old iphone with another account. Does anyone know how I can merge the two accounts?

When I got my new iPhone and was trying to switch everything over I accidentally set up a new icloud account with one email and had one on my old iphone with another account. Does anyone know how I can merge the two accounts?

You cannot merge Apple IDs but you can go to Settings > iCloud and 'Delete Account'. When prompted to turn off documents and data, choose the only option which is Delete from my iPhone, but on the other prompt for Contacts, Calendars, etc you can choose 'Keep on my iPhone' Then once the Account is Deleted form the iPhone, log back in with the correct Apple ID and choose Merge when prompted. This will merge your data from this iPhone with that iCloud account effectively putting your devices on the same account.

My iMac keeps typing a minus sign. I switched my wireless keyboard for a plug in Windows keyboard, and it keeps typing this one character. I took the batteries out of the Mac keyboard, so that is not the problem. I am running Mac OS X 10.6.8.

my iMac keeps typing a minus sign. I switched my wireless keyboard for a plug in Windows keyboard, and it keeps typing this one character. I took the batteries out of the Mac keyboard, so that is not the problem. I am running Mac OS X 10.6.8. In parallels, I don't have any problem, just on the Mac platform.

tebasj wrote:
Thanks for your observation. I realize they are different versions, but when I use the "Software Update" menu, this is as far as it would update. Is there some way to update the iMac beyond what "Software Update" does? I've tried it several times.
Please Note.
Upgrading OSX 10.6.8 (Snow Leopard) to 10.8.3 (Mountain Lion) is not an update. It is a paid upgrade. Just as with 10.7 (Lion) you must purchase it from the App Store with yor Apple ID and install it after backing up your current computer state for safety.
Cheers
Pete

Just got my new iPhone4, can't get the ringers to play. Yes, I've tried the switch on the side... HELP!

Just pulled my iPhone 4 out of the box, I'm trying to set the ring tones and I can't preview them and I can't hear it when the phone rings, only vibrates.
I've tried the switch on the side and from what I've read, there should be a little bell icon at the top; it's not there.
I'm so frustrated with this. Can someone please help me?

try restarting the phone and see if anything changes.
Restart iPhone: Hold down the Sleep/Wake button and the home button together until the apple logo appears then let both buttons go and wait for the phone to restart.

Im trying to switch my samsung intensity for a LG octane because I lost my intensity.

Similar Messages

Maybe you are looking for