Inbound function module idoc_input_mbgmcr

Is there an inbound function module idoc_input_mbgmcr in existence somewhere that i can use?

Hi Janice,
Yes there is!
Check out these threads..
idoc status messages
user exits in BAPI_IDOC_INPUT1
cheers,
Prashanth
P.S: Please mark helpful answers

Similar Messages

Process code for Function Module IDOC_INPUT_MBGMCR

hello!!
here i m tryin to create n inbound idoc
idoc type - MBGMCR02
Function Module - IDOC_INPUT_MBGMCR
but i dont knw the process code for dat can ny 1 help me to find it?
1st of all how to find da process code if u hav the FM ?
it wld b more helpful if ny1 cld give me the process code
thank u
ashwinee

hai
if u dont have process code r cant able to find process code,
u create process code its very easy.
for inbound, go to
   TX-WE42.
click create give ur process code and give that function module.
in processing type,
           u check the radiobutton as processing by function module and save it.
then, u can use this process code in our partner profile .
any doubt regarding this u can ask me.
Message was edited by:
        tamilarasan kandasamy

How to create the INBOUND Function Module for INBOUND IDOCs

Hi Friends,
Can any Suggest me How to proceed to Create an INBOUND Function Module for Processing the INBOUND IDOCS
which are recieved from XI Server ?
I am working in SAP-ISU
Here i will recieve the INBOUND IDOCs for the Meter Reading Orders.
We have a Standard INBOUND FUNCTION MODULE
IDOC_INPUT_ISU_MR_UPLOAD
which Uploads the Meter Reading Results.
I copied the Same function Module into ZIDOC_INPUT_
and working on it.
Can any one suggest me, whether i am going in correct way or not.
In IDOC_INPUT_ISU_MR_UPLOAD Inbound fun module,
BAPI_MTRREADDOC_UPLOAD is used to Update or Insert the Meter Reading Results,
My requirment is to Insert and Update the Meter Reading Orders which are Inbounded from XI.
Can I Use the Same BAPI
BAPI_MTRREADDOC_UPLOAD
to Update the below fields,
EABL-SERNR
EABL-ZWNUMMER
EABLG-ABLESGR
EABL-V_ZWSTAND
EABL-N_ZWSTAND
EABL-ABLHINW
EABL-ZSKIPC
EABL-ADAT
EABL-ATIMTATS
EABL-ADATTATS
EABL-ATIM
EABL-ZMESSAGE
EABL-ABLESER(Meter reader number)
Kindly Suggest me,
Thanks in Advance,
Ganesh

Hello Ganesh
I think you are going completely astray with you z-function module for IDoc processing.
If you look at TABLES parameter METERREADINGRESULTS (type BAPIEABLU ) of BAPI_MTRREADDOC_UPLOAD you will find many of the requested fields already:
EABL-SERNR => BAPIEABLU-SERIALNO
EABL-ZWNUMMER =>REGISTER
EABLG-ABLESGR
EABL-V_ZWSTAND
EABL-N_ZWSTAND
EABL-ABLHINW
EABL-ZSKIPC
EABL-ADAT
EABL-ATIMTATS => ACTUALMRTIME
EABL-ADATTATS => ACTUALMRDATE
EABL-ATIM
EABL-ZMESSAGE
EABL-ABLESER(Meter reader number)
Field EABL-ZMESSAGE appears to be custom field (at least I cannot find it on ECC 6.0). If this field was added using include CI_EABL then you probably can get these values into the BAPI using the EXTENSIONIN parameter.
Check routine CHECK_UPLOADRECORDS in the BAPI which allows two extension structures:
- BAPI_TE_EABL
- BAPI_TE_EOSB
Not surprisingly BAPI_TE_EABL contains the include CI_EABL.
Regards
Uwe

JDBC to IDoc (Custom inbound function module)

Hi,
In my scenario JDBC to IDoc, I am using a custom function module to change the planned order. When I exectue the function module in WE19, it works fine and the IDoc status is also updated correctly.
But when I execute the entire interface right from JDBC, the status of the IDoc is set to 51 and the description it is giving is "No status record was passed to ALE by the application".
Can any one help me with this, where exactly is the error?

For IDOC status 51 : Inbound IDOC
In WE19, Give the IDOC number & execute ... then put the cursor on the idoc control record . then click on the Standard Inbound push button on the application tool bar.it will show show all the details like partner no,type , message type , process code & function module name ...
now put a break point in the function module .. & debug .
if u r using customised inbound function module , then click on inbound function module .. there u will get a pop screen with FM name & debugging option in both background & foreground mode...

How to find out the inbound function module in the extended idoc

Hi,
how to find out the inbound function module in the extended idocs
Thanks .

through we41/we42 you can find the inbound function module.......
or
thorough we19(idoc test tool) ....
give the input as message type or basic idoc..
press exec...
then you can find th button on application tool bar as inbound funtion module....
from here also you can find..........
<REMOVED BY MODERATOR>
Khasimsa
Edited by: Alvaro Tejada Galindo on Apr 14, 2008 1:34 PM

Need help for IDOC inbound function module !

Hi guys please help me to create a IDOC inbound function module.
What are the parameters and tables.
How to write the code.
What it does.
Please send me one inbound func module code if possuble
Thanks

Hi,
You need to create an inbound function module. Then define the process code in transaction we42 and attach the function module to this process code.
In the function module you create you need to define tables of types EDIDC (Control record (IDoc)), EDIDD (Data record (IDoc)) and BDIDOCSTAT (ALE IDoc status (subset of all IDoc status fields)).
Regards,
Soumya.

IDOC from inbound function module

Hi All,
I have a inbound function module..
I dont know its Idoc type.
Ho to find the IDOC based on Inbound Function module
Thanks
Amruta

Hi Amruta
Inbound Function Moduel always in the format of IDOC_INPUT_XXXXXXX
xxxxxx is the your Message type...
Based on you message type u can get you idoc type....
if function moduel is Standard one ...
Thanks
Ram

Inbound function module for custom IDOC

HI,
I have created custom IDOC.I need to create inbound function module for that custom IDOC.Can any one send me sample
function module for custom IDOC.(what are all the import Export,tables parameters and exceptions that I need to create for function module)
Thanks&Regards
Rama.Mekala

HI Rama,
I presumed that You are talking about a FM to create inbound IDOC. So for creating inbound IDOC you can use '
    CALL FUNCTION 'IDOC_INBOUND_ASYNCHRONOUS'
    TABLES
      idoc_control_rec_40 = gt_edidc
      idoc_data_rec_40    = gt_edidd.
IF sy-subrc NE 0.
*    MESSAGE e000 WITH text-003.
* ELSE.
*    MESSAGE i000 WITH text-004 .
ENDIF.
just prepare edidc and edidd record in and pass it to the FM..
Hope this will work for you...
Thanks

Inbound function module for IDoc type INFRECMASS01

Hello everybody,
What is the inbound function module for IDoc type INFRECMASS01?
I tried IDOC_INPUT_INFREC (as for IDoc INFREC01), but I got the following message (B1 044): Incorrect function module IDOC_INPUT_INFREC called up
Thanks in advance
Roland

The only difference between INFRECMASS01 and INFREC01 is that repitition of the same segments. However, the standard function module is hardcoded with IDOC type INFREC01, so if you want to use the MASS IDOC copy the standard one and put in the logic to loop around and process the info records one by one.
There is no standard funtion that can process mass idoc of the info record.
Regards,
Ravi
Note: Please mark the helpful answers

Idocs - Inbound function module

Hi All,
I'm facing a prolem while testing the inbound function module thru transaction WE19.
The steps i'm following.
1) i'll give the message type & will proceed further
2) when i select the idoc & click on the push button "inbound function module " , My Z FM will displayed afterwards when i press enter a error message will be displayed.as"Interface for the Z function module is Incorrect"
i have created Z funtion module, Z message type,Z IDOC type,Z segment type. Z process Code
All the configuration like WE57,WE20,WE42 has been done.
Please help.
Points will be rewarded
Thanks,
Sureshkumar

Suresh , please check if ure function module interface is as per the template below:
IMPORTING
     INPUT_METHOD LIKE BDWFAP_PAR-INPUTMETHD
     MASS_PROCESSING LIKE BDWFAP_PAR-MASS_PROC
EXPORT
     WORKFLOW_RESULT LIKE BDWFAP_PAR-RESULT
     APPLICATION_VARIABLE LIKE BDWFAP_PAR-APPL_VAR
     IN_UPDATE_TASK LIKE BDWFAP_PAR-UPDATETASK
     CALL_TRANSACTION_DONE LIKE BDWFAP_PAR-CALLTRANS
TABLES
     IDOC_CONTRL STRUCTURE EDIDC
     IDOC_DATA STRUCTURE EDIDD
     IDOC_STATUS STRUCTURE BDIDOCSTAT
     RETURN_VARIABLES STRUCTURE BDWFRETVAR
     SERIALIZATION_INFO STRUCTURE BDI_SER
This is the general required format for IDoc inblund processing using FM.
Message was edited by:
        Ayan Banerjee

Need help in inbound function module !

What is the meaning of this in the inbound function module ?
WORK_RESULT = C_WF_RESULT_OK.
In my function module its showing some error !

Might be a constant C_WF_RESULT_OK is assigned to
variable WORK_RESULT .
Please check if they are declared in the function module ..

Creating a custom IDoc inbound function module

I have created a custom idoc.I wanted to create a custom IDoc inbound function module, this Function module will provide to launch a BAPI .Tell me how to "create" inbound function module for the custom idoc ?

Goto any standard for the Paramtetres
*" IMPORTING
*"     REFERENCE(INPUT_METHOD) LIKE BDWFAP_PAR-INPUTMETHD
*"     REFERENCE(MASS_PROCESSING) LIKE BDWFAP_PAR-MASS_PROC
*" EXPORTING
*"     REFERENCE(WORKFLOW_RESULT) LIKE BDWFAP_PAR-RESULT
*"     REFERENCE(APPLICATION_VARIABLE) LIKE BDWFAP_PAR-APPL_VAR
*"     REFERENCE(IN_UPDATE_TASK) LIKE BDWFAP_PAR-UPDATETASK
*"     REFERENCE(CALL_TRANSACTION_DONE) LIKE BDWFAP_PAR-CALLTRANS
*"     REFERENCE(DOCUMENT_NUMBER) LIKE VBAK-VBELN
*" TABLES
*"      IDOC_CONTRL STRUCTURE EDIDC
*"      IDOC_DATA STRUCTURE EDIDD
*"      IDOC_STATUS STRUCTURE BDIDOCSTAT
*"      RETURN_VARIABLES STRUCTURE BDWFRETVAR
*"      SERIALIZATION_INFO STRUCTURE BDI_SER
*"      EDI_TEXT STRUCTURE EDIORDTXT1 OPTIONAL
*"      EDI_TEXT_LINES STRUCTURE EDIORDTXT2 OPTIONAL
Do the below configs.
1.Recognise the funcmod as Inbound -BD51
2.Register the Function module in WE57 .
3.we42 Process code .
4. WE20 -PARTNER Profile
I hope it resolves ur Query.
Rgds
Sree M

IDOC inbound function module!

Has anybody worked on IDOC inbound function module !
What is the meaning of the following steps !
IDOC_STATUS-DOCNUM = IDOC_CONTROL-DOCNUM.
IDOC_STATUS-STATUS = '51'.
IDOC_STATUS-MSGTY = 'E'
IDOC_STATUS-MSGID = ' ZE'
IDOC_STATUS-MSGNO = '007'
IDOC_STATUS-MSGV1 = IT_LIKP-vbeln.
APPEND IDOC_STATUS.
What are possible values for MSGTY,MSGID, MSGNO.....
What do they mean !
Edited by: Alvaro Tejada Galindo on Mar 10, 2008 7:18 PM

"here nothing complicated ...
"status 51 means 'Application document not posted'
"in WE02 you can see this message
IDoc: 0000000000001254 Status: Application document not posted
IDOC_STATUS-DOCNUM = IDOC_CONTROL-DOCNUM. "IDoc number
IDOC_STATUS-STATUS = '51'.                                      "stauts code
IDOC_STATUS-MSGTY = 'E'                                         "error type
IDOC_STATUS-MSGID = ' ZE'                                       "message class ID
IDOC_STATUS-MSGNO = '007'                                     "message number in ZE
IDOC_STATUS-MSGV1 = IT_LIKP-vbeln.                      "document number or order number
APPEND IDOC_STATUS.

Debugging problem, in inbound function module.

Hi Experts,
              R/3 system is receiving data through an IDOC called WPUUMS[sales data]. It has been seen that when this data is posted in R/3 through XI the data gets reflected in WE02 / WE05, and is similar to when a manual entry is done the transaction WPUK. But the difference is , when manual idoc generation is done, it is updating correct data in database, but when same data is posted from XI, it is updating data base with in correct data!
   what I cant get to understand is in both the cases, IDOC is posted, and same data is there in the DATA records, but database is getting upated with diff data.
    Also , when I am putting a break point on the inbound function module IDOC_INPUT_POS_SALES_ACCOUNT, it is not hitting the break-point but idoc gets generated successfully with status records like
53 Application Document posted
62 Idoc Passed to application
64 Idoc ready to be transferred to application
50 Idoc added.
Also , i want to know, wether these messeges come step by step or randomly, because, why is the messege 62, before messege 64.
Lastly when I am taking the same IDOC and trying the same in WE19, then it hits the break-point function module IDOC_INPUT_POS_SALES_ACCOUNT successfully.
Experts, comments pls.!
Regards,
Arnab.

Hi,
You are supposed to read the ststus messages from bottom to top. So the actual sequence is:
50 Idoc added.
64 Idoc ready to be transferred to application
62 Idoc Passed to application
53 Application Document posted
Which is correct.
And it is correct that the system bypasses any breakpoint in the background mode. So when the IDoc is coming from XI the posting FM IDOC_INPUT_POS_SALES_ACCOUNT is called in background and so the breakpoint is not called.
Only way to debug the problem is via transaction WE19 in Debug mode.
Regards,
Prakash Pandey

Reg : IDOC - inbound function module

HI guys,
I have an ....list of error inbound idocs .......(presently using function module X)......
but recently we made lot of changes in inbound function module and release as "Y"...hence presently all idocs Uses the inbound function module 'Y'.
In this scenario i wanted to re-process the old idocs.....(which were in error state 51).......Which should use the old function module 'X'.....(it should not use Function module 'Y')
In short 'based on the date ....my inbound function module should be assigned while processing idocs.
idoc date < 01.01.2011 then old function module (I.E FM "X")
idoc date > = 01.01.2011 then new function module (i.e. FM "Y")
regards
Girish

You can't do that via the standard config. You can, however, embed the call to your 'X' function in your new 'Y' function based on your date criteria. Whether that date is hard-coded or stored in TVARVC is up to you.

Inbound function module idoc_input_mbgmcr

Similar Messages

Maybe you are looking for