Inbound Message Fails with Send Exp"
We are on 10.1.2.0.2 and tryting to test (ebms ) outbound/inbound messaging with a trading partner. The outbound from us to TP works great, but on inbound from the TP we are seing the following errors: (This works on 10.1.2.0.0)
Machine Info: (devb2b.helenachemical.com)
Description: B2B adapter general error
StackTrace:
Error -: AIP-50031: B2B adapter general error: Error -: AIP-50025: Repository error : Error -: AIP-50547: Trading partner agreement not found for the given input values: From party[NAME] "DEST Partnre", To party[NAME] "SOURCE Partner", Business action name "SendResponseEnd"; also verify agreement effectiveToDate
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1735)
at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2294)
at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2193)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2148)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:500)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:348)
at java.lang.Thread.run(Thread.java:534)
Caused by: Error -: AIP-50025: Repository error : Error -: AIP-50547: Trading partner agreement not found for the given input values: From party[NAME] "DEST Partner", To party[NAME] "SOURCE Partner", Business action name "SendResponseEnd"; also verify agreement effectiveToDate
at oracle.tip.adapter.b2b.tpa.RepoDataAccessor.getAgreementNameByBaTPType(RepoDataAccessor.java:1852)
at oracle.tip.adapter.b2b.tpa.TPAIdentifier.identifyTPA(TPAIdentifier.java:167)
at oracle.tip.adapter.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:495)
at oracle.tip.adapter.b2b.tpa.TPAProcessor.processIncomingTPA(TPAProcessor.java:226)
at oracle.tip.adapter.b2b.engine.Engine.handleExceptionBeforeIncomingTPA(Engine.java:3568)
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1614)
... 6 more
Caused by: Error -: AIP-50547: Trading partner agreement not found for the given input values: From party[NAME] "DEST Partner", To party[NAME] "SOURCE Partner", Business action name "SendResponseEnd"; also verify agreement effectiveToDate
at oracle.tip.adapter.b2b.tpa.RepoDataAccessor.getAgreementNameByBaTPName(RepoDataAccessor.java:2176)
at oracle.tip.adapter.b2b.tpa.RepoDataAccessor.getAgreementNameByBaTPType(RepoDataAccessor.java:1839)
... 11 more
Any ideas on what is different in the newer version of B2B
Thanks
PT
Hi Ramesh,
Found this issue- in the new release the Business Action name and choreography name must match to work with TP on custom document over ebms.
We still have issues,,, the TP's that are working currently on 10.1.2.0 are no more working. For example:
The following wire envelope was sent from one of our TP:
--MIME_boundary
Content-ID: <1dac9c73-bba3-4fc3-a756-0134872b03d2ebxml-Header>
Content-Type: text/xml
<?xml version='1.0' encoding='utf-8'?><soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:eb="http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd" xmlns:xlink="http://www.w3.org/1999/xlink" xsi:schemaLocation="http://schemas.xmlsoap.org/soap/envelope/ http://www.oasis-open.org/committees/ebxml-msg/schema/envelope.xsd"><soapenv:Header xsi:schemaLocation="http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd"><eb:MessageHeader eb:version="2.0" soapenv:mustUnderstand="1"><eb:From xmlns:axis2ns1561="http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd"><eb:PartyId xmlns:axis2ns1562="http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd" axis2ns1562:type="DUNS+4">8097318700000</eb:PartyId></eb:From><eb:To xmlns:axis2ns1563="http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd"><eb:PartyId xmlns:axis2ns1564="http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd" axis2ns1564:type="DUNS">0070367590000</eb:PartyId></eb:To><eb:CPAId xmlns:axis2ns1565="http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd">OrderCreate</eb:CPAId><eb:ConversationId xmlns:axis2ns1566="http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd">7229ce0c-4b6a-419c-b301-ef28708fda68</eb:ConversationId><eb:Service xmlns:axis2ns1567="http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd">uri:OrderCreate</eb:Service><eb:Action xmlns:axis2ns1568="http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd">SendResponseEnd</eb:Action><eb:MessageData xmlns:axis2ns1571="http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd"><eb:MessageId xmlns:axis2ns1572="http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd">1dac9c73-bba3-4fc3-a756-0134872b03d2</eb:MessageId><eb:Timestamp xmlns:axis2ns1573="http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd">2008-05-28T10:33:55Z</eb:Timestamp></eb:MessageData><eb:DuplicateElimination xmlns:axis2ns1574="http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd" /></eb:MessageHeader><eb:AckRequested eb:signed="false" eb:version="2.0" soapenv:mustUnderstand="1" /></soapenv:Header><soapenv:Body><eb:Manifest eb:id="Manifest" eb:version="2.0"><eb:Reference eb:id="Payload-1" xlink:href="1dac9c73-bba3-4fc3-a756-0134872b03d2-body1" xlink:type="simple" /></eb:Manifest></soapenv:Body></soapenv:Envelope>
On the Ack, B2B is sending the following:
SOAPAction="ebXML"
Content-Type=multipart/related;type="text/xml";boundary="----=_Part_29_18537968.1211985238867";start="<ebxheader-0A27EBC811A2FF31B3B00000C6520000>"
Content-Length=1744
------=_Part_29_18537968.1211985238867
Content-Type: text/xml
Content-ID: <ebxheader-0A27EBC811A2FF31B3B00000C6520000>
<?xml version="1.0" encoding="utf-8" ?>
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:eb="http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd" xsi:schemaLocation="http://schemas.xmlsoap.org/soap/envelope/ http://www.oasis-open.org/committees/ebxml-msg/schema/envelope.xsd http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd"><env:Header><eb:MessageHeader env:mustUnderstand="1" eb:version="2.0"><eb:From><eb:PartyId eb:type="ebMS Identifier">0070367590000</eb:PartyId></eb:From><eb:To><eb:PartyId eb:type="ebMS Identifier">8097318700000</eb:PartyId></eb:To><eb:CPAId>SendResponseEnd</eb:CPAId><eb:ConversationId>7229ce0c-4b6a-419c-b301-ef28708fda68</eb:ConversationId><eb:Service>urn:oasis:names:tc:ebxml-msg:service</eb:Service><eb:Action>Acknowledgment</eb:Action><eb:MessageData><eb:MessageId>Helena Operating Unit@0A27EBC811A2FF31B4400000C6530000</eb:MessageId><eb:Timestamp>2008-05-28T14:33:58.000Z</eb:Timestamp><eb:RefToMessageId>1dac9c73-bba3-4fc3-a756-0134872b03d2</eb:RefToMessageId></eb:MessageData></eb:MessageHeader><eb:Acknowledgment env:actor="urn:oasis:names:tc:ebxml-msg:actor:toPartyMSH" env:mustUnderstand="1" eb:version="2.0"><eb:Timestamp>2008-05-28T14:33:58.000Z</eb:Timestamp><eb:RefToMessageId>1dac9c73-bba3-4fc3-a756-0134872b03d2</eb:RefToMessageId></eb:Acknowledgment></env:Header><env:Body/></env:Envelope>
------=_Part_29_18537968.1211985238867--
They send us Service: uri:orderCreate; Action: SendResponseEnd; CPAID: OrderCreate.
We send in the Ack:
Service: urn:oasis:name:tc:ebxml-msg:sercice; Action:Acknowledgment: CPAID:SendResponseEnd
Where is it pulling the CPAID? or why is it using the Business Action Name?
The message shows complete on our side, but does not get completed on TP side, and since they are they are the initiator they retry 2 times befoer they stop and this is causing duplicte errors on our side. They are using Nexus ebms engine.
Any info on this is appreciated. We are using ebms 2.0
Thanks
PT
Similar Messages
-
cant receive or send messages on my iPad. Keep getting "message failed to send" and it is green instead of blue. This happened after I turned on iCloud on my iPhone. Would that have anything to do with this problem? It's like its not sincing to my phone but I can send & receive emails ok.
iOS 7.1.2, huh? It MAY be having some trouble with the iOS 8.x devices and latest iCloud features. Although it meets the minimum system requirements, it does not meet the recommended ones - System requirements for iCloud - Apple Support
You should try Restart or reset your iPhone, iPad, or iPod touch - Apple Support - this is generally the first step in troubleshooting, all devices - for all time
Message Colors
Blue is iMessage (Apple service)
Green is SMS (Carrier service)
What happens when you use your iPad similarly? (what iPad model & iOS version)
As a last resort*, Use iTunes to restore your iOS device to factory settings - Apple Support - *this document tells that all your data will be lost but provides steps to back-up (Before section) then restore your data (Restore section #4) -
In Runtime Workbench the messages fails with the error
Hi,
Os : Sun Solaris
Database: oracle
Sap: XI 7.0
In Runtime Workbench the messages fails with the following error:
2007-09-28 15:46:38 Error Delivery of the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: java.lang.NullPointerException.
system messages fails with following Error Message:
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
<SAP:P1>503</SAP:P1>
<SAP:P2>Service Unavailable</SAP:P2>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP response contains status code 503 with the description Service Unavailable Error while sending by HTTP (error code: 503, error text: Service Unavailable)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Appreciate the response.
Thanks,
Sri.Hi,
1)Check your J2EEs server is up
2)Check the adapter engine/status in RWB
The might help
1) 503 service unavailable
2) Note-803145
Regards
Agasthuri Doss -
"Message Failed To Send," but it actually sends it 6 times!
This started happening this morning. Whenever I try to send a text, whether it be a regular text or iMessage, I keep getting a message saying "Message Failed To Send," and then it has a red exclamation point by the message and it says "Not Delivered." If that's not annoying enough, the recipients are actually receiving the message 6 times! Is anyone else having this issue? I'm using a [brand new] iPhone 5S on AT&T service, if that matters. I'm about to throw this iPhone at the wall... HELP!
Throwing it at the wall will certainly stop it from sending the message six times, along with everything else. First thing to do is reset the phone, following the procedure outlined below.
Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss) -
Periodically, text messages seem to hang for a long period of time in the "sending" status. Then I get an error message that says the message failed to send. When I check with the recipient, they usually say they did receive the message. Sometimes they say they received the same message three times.
I cannot see a pattern for when these failures occur. It has happened when I have one bar and when I have 4 bars. It has happened when I'm connected to 3G or 4G, and when I'm connected to wifi.We want to see those picture messages flying again! Does the wireless signal appear strong when attempting the message? What Messaging app are you using myustbedumb? Are you also using a Network Extender?
Thank you,
YaleK_VZW
Follow us on Twitter @VZWsupport -
Messages fail to send constantly..
I always have 3/4 bars of 4G. if I send a text message more and more often it comes up message failed to send, I've tried putting my phone on aeroplane mode and send the message again but it doesn't work.. any ideas?
Are phone calls ok? There seems to be a lot of issues with signal around at the mo?
First of give it the good old fashion turn off and on again, is it all messages that fail?
If it isn't, go to message, tap details in top right corner, then the i next to the contacts name, this will show you the contact card for that person, the number/email address it is trying to send to will be highlighted blue.
Normal text messages (green text bubble in message app) will only go to numbers not email addresses, and iMessage will only go to other iOS devices via number or email (blue text bubble) -
Message failed to send but has arrived
I am having the same problem. It only seems to occur when I'm including a photo in the message. It says "Message failed to send," but it usually goes through.
-
Whenever i try and send an imessage to someone that has an iphone it gets stuck at times and won't go through. I then have to send it as a basic text and then it will respond message failed to send what should i do when it does this i need help
The use of iMessage depends on both the sender and the receiver having an active data connection. If either of the two connections are interrupted, the message can fail. The sending of an iMessage differs from the sending of an SMS, and if you are having SMS failures, that would be a carrier concern.
-
My Nokia message fails to send after reinstall of ...
Hi there,
I'm posting to ask whether anybody has encountered this issue and whether anyone knows of any fixes to fix this issue. After doing a reinstall of the phone's firmware as mentioned in another post on the forum, the My Nokia message keeps failing to send and keeps getting stuck in my Outbox, I'm able to send other messages in which some contacts are able to receive them whereas some of them can't for some strange reason and don't arrive in which I am trying to resolve this problem. The SIM I currently have in the phone is a Lycamobile micro SIM which is converted into a full sized SIM using a micro to full SIM converter, could this be the culprit of the problem? I've tried this method for many months and have only encountered 1 person not receiving a message for me but this was a one off though and hasn't happened for a couple of months, this was when I was test trialing Vodafone as I currently own many free SIMs and want to try them all out on the various phones I currently own over 2 to 3 years in order to test signal coverage across many places I travel on a regular basis such as Manchester, Carlisle etc. Your continuous help would be much appreciated.
Kind regards,
RocknRollTimHi EAaspa,
I checked the signal strength on my phone screen and it has full bars displaying, I have even moved to another area to get better reception and still the same happens as before. I've also checked the message centre settings on my phone with my network operator and they are correct. I have also sent a text message to my own phone number and the text was sent and received fine. I do recall Vodafone sending out a text on Tuesday to one of my Vodafone mobile numbers (presume the same applies to all Vodafone numbers) saying "We're upgrading the network in your area. This means there may be around 2-3 days disruption over the next 6 weeks. We're sorry for any inconvenience caused and we'll let you know when the work's complete. For more information on the network in your area, see our coverage checker at http://vdfn.co/pe5ka". I know the person who I have been trying to send texts to is on Vodafone and lives in a rural area where she needs to use a Vodafone Signal box to provide a phone signal for her phone, it could be possibly be this causing problems but the weird thing is though that I am able to send texts from my Lycamobile number to one of my Vodafone mobile numbers and from my Vodafone mobile number to my Lycamobile and both send and receive texts fine whereas if I send her texts from my Lycamobile number to her mobile number she doesn't receive them at all even though the phone says they were sent properly i.e. disappear from Outbox and generate copies in the sent items whereas if she sends texts from her mobile number to my Lycamobile number I receive them fine?
With regards to the My Nokia message problem I think the 84000 number no longer works as Microsoft have been making changes to their servers including the old Nokia servers where they have been turning off SSL 3.0 and enabling TLS 1.0 instead due to a number of security breaches happening on various websites this year in particular as I have noticed this on quite a number of websites and prevented me from logging into Nokia Suite 3.8 on a few of our PCs, I resolved this by using the following link http://discussions.nokia.com/t5/Online-services-from-Nokia-Nokia/Can-t-sign-in-to-Nokia-account-via-... I'll confirm whether the 84000 number works for My Nokia messages as soon as I have sometime to test this on my other Nokia 5230 after doing a soft reset, hard reset and reinstall.
Anyway thank you for responding to my forum thread and for suggesting fixes on how to resolve my problem, and I'll keep you informed of how I get on.
Kind regards,
RocknRollTim -
XI messages failed with com.sap.aii.af.ra.ms.api.ConfigException
Hi forum experts,
A group of POs were sent at the same time, but once a while we get one PO failed with the below error. Could someone help me understand what the below error message mean. Your help would be greatly appreciated.
thanks,
Velvet
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!--
Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.ConfigException: Could not check current user (PIISUSER) against technical IS service user. Reason: Failed to read IS ServiceUser Id from EP. Reason: null</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>Hi,
we are facing exactly the same problem. Where you able to solve it? And how?
Thanks.
S.Socratous -
Rosettanet Inbound message erroring with error
Hi,
We are getting ""PI with the name 'xml' can occur only in the beginning of the document" error for inbound messages in Rosettanet format. This is happening for only one TP, but there is no difference in the message format except few extra lines.
The TP is confirming that the message is getting generated using "BizTalk" server.
Any suggestion to fix the issue is highly appreciated.
Thanks,
AdarshAdarsh,
XML file is invalid. Make sure that "<?xml version="1.0" encoding="UTF-8" ?>" is the first line in the XML and there are no characters/spaces before it. There should be only one occurance of <?xml in the incoming XML and that too in the prolog I mentioned above. An following occurrence must be escaped using CDATA tag.
Regards,
Anuj -
TS3899 Message failed -exceeded sending limit?
On only one email account on the Ipad 3rd gen. - receive "error - message failed because exceeded your sending limit"? Anyone have any ideas. I can send just fine from a desktop on this account?
What mail provider do you use and you get that message always?
-
Digital touch message fails to send
My apple watch sport is failing to send digital touch messages. I can receive them but i cannot send them out. I keep getting a message that it fails to send and asks me to retry.
check on your settings to see I message, click on send and receive and see how it's setup, if you see it's setup as your iCloud you may want to change it to your cell number .... Try from there
-
Outgoing Mail OK But Always 2 Messages Fail To Send.
I can sync my iPhone OK and the Mail works fine, except for an annoying little problem: when I open up mail it searches for new mail, but at the same time it tries to send the same two emails EVERY TIME!!! It results in the dialog box 'Cannot Send Mail. The connection to the outgoing server "smtp.mac.com" failed.' The outgoing server is fine and I can send and receive emails, but this is getting on my nerves. I have looked in all the mail folders for rogue outgoing emails, and have re-synced the mail account, but to no avail.
Has anyone else had this problem? Any help greatly appreciated.Re-syncing the email account has no affect on this since this transfers the account settings only from your computer to the iPhone which is in one direction only from your computer to the iPhone. This does not transfer or sync messages or anything else.
If you are accessing your .Mac account as a .Mac type account or IMAP account with the Mail application on your Mac, I suggest deleting the account on the iPhone and re-syncing the account settings and if this doesn't work, delete the account and manually recreate the account on the iPhone without transferring the account settings to your iPhone via the sync process. -
Following message failing in sender soap adapter
Hi all,
The message below fails when it is sent to our adapter with a 500 error from a webmethods server. however if I pull the soap message out of the mime, and use our client test tool, it posts fine.
What is wrong with the message below?
Message-ID:<28413146.1155935375732.JavaMail.webmethods@exshaw>
MIME-Version: 1.0
Content-Type: multipart/related; type="text/xml"; boundary=X-K12456234-X
X-K12456234---X
content-type: text/xml;charset=UTF-8
content-transfer-encoding: 7bit
Content-ID: <SES>
<?xml version="1.0" encoding="UTF-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsd="http://www.w3.org/1999/XMLSchema"
xmlns:xsi="http://www.w3.org/1999/XMLSchema-instance">
<SOAP-ENV:Header xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"></SOAP-ENV:Header>
<SOAP-ENV:Body>
<nr1:ServiceAcknowledgementRequest xmlns:nr1="http://sap.com/xi/SAPGlobal/Global">
<MessageHeader>
<ID schemeID="0240">74000003400000000020060329170547</ID>
<CreationDateTime>2006-03-29T17:05:47Z</CreationDateTime>
<SenderParty>
<InternalID schemeID="PartnerID" schemeAgencyID="SSR_100">6000000011</InternalID>
</SenderParty>
<RecipientParty>
<InternalID schemeID="PartnerID" schemeAgencyID="SSR_100">0000000236</InternalID>
</RecipientParty>
</MessageHeader>
<ServiceAcknowledgement>
<ID schemeAgencyID="SSR_100" schemeAgencySchemeAgencyID="ZZZ">7400000340</ID>
<BuyerID>7400000340</BuyerID>
<CreationDateTime>2006-03-29T17:03:55Z</CreationDateTime>
<Note>Service Entry Sheet#1</Note>
<Item>
<ID>10</ID>
<Quantity unitCode="EA">5.0</Quantity>
<Product>
<TypeCode>1</TypeCode>
<Note>Test Service</Note>
</Product>
<Price>
<NetUnitPrice>
<Amount currencyCode="USD">1.0</Amount>
<BaseQuantity unitCode="EA">1.0</BaseQuantity>
</NetUnitPrice>
</Price>
<PurchaseOrderReference>
<ID>2000000742</ID>
<ItemID>1</ItemID>
</PurchaseOrderReference>
</Item>
</ServiceAcknowledgement>
</nr1:ServiceAcknowledgementRequest>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
X-K12456234---XHi Richard,
I think, it is because of the Autorization Problem..i.e
Webservice is not able to execute by SOAP adapter.. So Security Roles etc..
Check this SAP SOAP Note for FAQ-856597 (Question No 1)
A similar symptom is mentioned in this note....
Regards,
Abhy
Maybe you are looking for
-
How to display an XML in Web Dynpro
Hi, I am pretty new to Web Dynpro and have a specific requirement. I have a web dynpro page on which we display a table. One of the columns in the table is a XML message. Now on lead selection of each row I want to display the contents of the XML in
-
hello i am pretty new to portlets the problem is that i want that i dispaly a list of record in one portlet and if user click on that record then on the next protlet this record is shown. this require two portlets i followed a lot of links but i dnt
-
Every time i try and go to the itunes store i get a message saying cannot conect to itunes store, check internet connection, but i am browsing so am already connected to the internet? what can i do?
-
After taking a screenshot command + Shift + 4, clicking on my trackpad is like right mouse click or 2 finger click. Please help!
-
Suddenly my macbook pro is typing gibberish
we've restarted it and updated Word software, and nothing is helping