Incomplete Request At Server

Hi everybody,
I have a problem while sending large requests(>6kb) (in XML format) to a servlet over a secure http connection. I am using HttpsURLConnection to send the request.
At the server end, when i try to get the content length using getContentLength(), it shows correct value. But the InputStream object's available() method returns a smaller value and so does the read method when trying to read the data. I have tried using readFully to read getContentLength() amount of data, but with the same result.
Servlet works fine with smaller requests.
The client side code for sending the request is as follows:
HttpsURLConnection objConnection = ...
OutputStream out = objConnection.getOutputStream();
byte buffer[]=strRequestXML.getBytes();
out.write(buffer);
out.flush();
out.close();
Are there any properties to be set at either client or server end?
ANY HELP IS VERY MUCH APPRECIATED.
Regards,
Roshan

Thanks ejp and dpz for your replies.
But I am flushing at the client.
And I have tried reading till the entire data arrives (i,e. getContentLength() no of bytes). But I get data in only the first read I perform and then no further data.
And there is no maximum data that is actually transferred.
if i send 16 kb, the server receives 12 kb.
if i send 160 kb, the server receive 130 kb.
I DESPERATELY AM IN NEED OF A SOLUTION.
thanks and regards
roshan

Similar Messages

  • Adobe Creative Cloud connectivity issue on Websense run network; Failed to send the request to server to get the response - 12002

    Hi all,
    I am able to install the Windows Adobe Creative Cloud application fine on Windows 7 box but the application fails to establish a connection with Adobe server/-s.
    We use a proxy with Websense as our network security solution. Proxy configuration script is set in Internet Options. We have not tried to whitelist anything as per http://helpx.adobe.com/creative-cloud/kb/proxy-authentication-support-creative-cloud.html as the errors suggest the application does not even connect to the proxy server/Websense at all.
    Please see below snippet from that DLM.log file that contains the error messages - please have a look. Could anybody tell me what it means or advise how to resolve this please? I don't see the Adobe Creative Cloud tool to have any options where manual proxy settings can be setup to try that.
    <snip>
    11/05/14 08:50:48:184 | [INFO] | |  |  |  |  |  | 5236 | **File download complete.**
    11/05/14 08:50:52:145 | [INFO] | |  |  |  |  |  | 3732 | **File download complete.**
    11/05/14 08:51:05:327 | [INFO] | |  |  |  |  |  | 1784 | **File download complete.**
    11/05/14 08:51:06:968 | [ERROR] |  | |  |  |  |  | 3452 | The windows error code is - 12002
    11/05/14 08:51:06:968 | [ERROR] |  | |  |  |  |  | 3452 | Failed to send the request to server to get the response - 12002
    11/05/14 08:51:06:968 | [ERROR] |  | |  |  |  |  | 3452 | the download job (0) failed to execute. The job state is STOPPED_STATE
    11/05/14 08:51:06:992 | [INFO] | |  |  |  |  |  | 6844 | some intermittent error. Retrying now. Error code is 12002 and error type is -45
    11/05/14 08:51:11:514 | [INFO] | |  |  |  |  |  | 6844 | incrementing the thread. now the active thread count is 2
    11/05/14 08:51:12:519 | [INFO] | |  |  |  |  |  | 6648 | **File download complete.**
    11/05/14 08:51:16:541 | [INFO] | |  |  |  |  |  | 6844 | decrementing the thread count. now the active thread count is 1
    11/05/14 08:51:22:281 | [INFO] |  | |  |  |  |  | 3452 | resetting intermitent error 9 from to 1 to 0
    11/05/14 08:51:29:022 | [INFO] | |  |  |  |  |  | 1836 | **File download complete.**
    11/05/14 08:52:22:381 | [INFO] | |  |  |  |  |  | 7220 | incrementing the thread. now the active thread count is 2
    11/05/14 08:52:26:971 | [ERROR] |  | |  |  |  |  | 6756 | The windows error code is - 12002
    11/05/14 08:52:26:971 | [ERROR] |  | |  |  |  |  | 6756 | Failed to send the request to server to get the response - 12002
    11/05/14 08:52:26:971 | [ERROR] |  | |  |  |  |  | 6756 | the download job (5) failed to execute. The job state is STOPPED_STATE
    11/05/14 08:52:27:383 | [INFO] | |  |  |  |  |  | 7220 | some intermittent error. Retrying now. Error code is 12002 and error type is -45
    11/05/14 08:52:27:663 | [INFO] |  | |  |  |  |  | 4908 | resetting intermitent error 9 from to 1 to 0
    11/05/14 08:52:28:733 | [INFO] | |  |  |  |  |  | 6064 | **File download complete.**
    11/05/14 08:52:42:810 | [INFO] | |  |  |  |  |  | 7220 | **File download complete.**
    11/05/14 08:52:45:570 | [INFO] | |  |  |  |  |  | 3788 | **File download complete.**
    </snip>
    There is also an INFO class message that talks about resetting an ‘error 9’ from 1 to 0.

    Hi all,
    I am able to install the Windows Adobe Creative Cloud application fine on Windows 7 box but the application fails to establish a connection with Adobe server/-s.
    We use a proxy with Websense as our network security solution. Proxy configuration script is set in Internet Options. We have not tried to whitelist anything as per http://helpx.adobe.com/creative-cloud/kb/proxy-authentication-support-creative-cloud.html as the errors suggest the application does not even connect to the proxy server/Websense at all.
    Please see below snippet from that DLM.log file that contains the error messages - please have a look. Could anybody tell me what it means or advise how to resolve this please? I don't see the Adobe Creative Cloud tool to have any options where manual proxy settings can be setup to try that.
    <snip>
    11/05/14 08:50:48:184 | [INFO] | |  |  |  |  |  | 5236 | **File download complete.**
    11/05/14 08:50:52:145 | [INFO] | |  |  |  |  |  | 3732 | **File download complete.**
    11/05/14 08:51:05:327 | [INFO] | |  |  |  |  |  | 1784 | **File download complete.**
    11/05/14 08:51:06:968 | [ERROR] |  | |  |  |  |  | 3452 | The windows error code is - 12002
    11/05/14 08:51:06:968 | [ERROR] |  | |  |  |  |  | 3452 | Failed to send the request to server to get the response - 12002
    11/05/14 08:51:06:968 | [ERROR] |  | |  |  |  |  | 3452 | the download job (0) failed to execute. The job state is STOPPED_STATE
    11/05/14 08:51:06:992 | [INFO] | |  |  |  |  |  | 6844 | some intermittent error. Retrying now. Error code is 12002 and error type is -45
    11/05/14 08:51:11:514 | [INFO] | |  |  |  |  |  | 6844 | incrementing the thread. now the active thread count is 2
    11/05/14 08:51:12:519 | [INFO] | |  |  |  |  |  | 6648 | **File download complete.**
    11/05/14 08:51:16:541 | [INFO] | |  |  |  |  |  | 6844 | decrementing the thread count. now the active thread count is 1
    11/05/14 08:51:22:281 | [INFO] |  | |  |  |  |  | 3452 | resetting intermitent error 9 from to 1 to 0
    11/05/14 08:51:29:022 | [INFO] | |  |  |  |  |  | 1836 | **File download complete.**
    11/05/14 08:52:22:381 | [INFO] | |  |  |  |  |  | 7220 | incrementing the thread. now the active thread count is 2
    11/05/14 08:52:26:971 | [ERROR] |  | |  |  |  |  | 6756 | The windows error code is - 12002
    11/05/14 08:52:26:971 | [ERROR] |  | |  |  |  |  | 6756 | Failed to send the request to server to get the response - 12002
    11/05/14 08:52:26:971 | [ERROR] |  | |  |  |  |  | 6756 | the download job (5) failed to execute. The job state is STOPPED_STATE
    11/05/14 08:52:27:383 | [INFO] | |  |  |  |  |  | 7220 | some intermittent error. Retrying now. Error code is 12002 and error type is -45
    11/05/14 08:52:27:663 | [INFO] |  | |  |  |  |  | 4908 | resetting intermitent error 9 from to 1 to 0
    11/05/14 08:52:28:733 | [INFO] | |  |  |  |  |  | 6064 | **File download complete.**
    11/05/14 08:52:42:810 | [INFO] | |  |  |  |  |  | 7220 | **File download complete.**
    11/05/14 08:52:45:570 | [INFO] | |  |  |  |  |  | 3788 | **File download complete.**
    </snip>
    There is also an INFO class message that talks about resetting an ‘error 9’ from 1 to 0.

  • Error while sending SOAP Request to server through XML Spy

    i have created a webservice to jdbc scenario application and when i tried to check my webservice with XML Spy by giving inputs to wsdl file as SOAP Request to server, its showing the error like this:
    <b><u>Http error : could not POST File</u></b>
    It would be good if u explain step by step procedure how to solve the issue.
    Thanks & Regards.,
    Pushparaju.B

    This is the error showing after clicking OK button after it showed the error
    Http error : could not POST File
    <b><?xml version="1.0"?>
    <!-- see the documentation -->
    <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
         <SOAP:Body>
              <SOAP:Fault>
                   <faultcode>SOAP:Server</faultcode>
                   <faultstring>Server Error</faultstring>
                   <detail>
                        <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
                             <context>XIAdapter</context>
                             <code>DeliveryException</code>
                             <text><![CDATA[
    com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:PL_TIMEOUT:
         at com.sap.aii.adapter.xi.ms.XIEventHandler.onTransmit(XIEventHandler.java:451)
         at com.sap.aii.af.ra.ms.impl.core.queue.CallConsumer.onMessage(CallConsumer.java:125)
         at com.sap.aii.af.ra.ms.impl.core.queue.Queue.run(Queue.java:831)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
              ]]></text>
                        </s:SystemError>
                   </detail>
              </SOAP:Fault>
         </SOAP:Body>
    </SOAP:Envelope></b>
    yes i have the role of XIAPPLUSER
    scenario has created by me and i have the authorization to enter into XI

  • Sys.webforms.page request manager server error exception:An unknown error occured while processing the request on server. The status code returned from the server was:0

    sys.webforms.page request manager server error exception:An unknown error occured while processing the request on server. The status code returned from the server was:0 We got this response(In firebug console) when we try to click on link (after leave webpage for 3 minuts ideal) which is AJAX based. Please reply ASAP because its urgent.

    Hi SP,
    Please check if the following web config appSettins value settings from SSRS server could fix the issue (Note, back up your original web config file before any modification).
    http://stackoverflow.com/questions/10911610/ssrs-webpage-error-status-code-500
    http://srinivasbn.blogspot.in/2013/09/syswebformspagerequestmanagerservererro.html
    http://connect.microsoft.com/SQLServer/feedback/details/782155/ssrs-2012-failed-with-win32-error-0x03e3
    If you have more questions about the SSRS error logs related to this issue, you can post in the SSRS forum for a better assistance with more experts.
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices
    Thanks
    We are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • ISE Alarm : Critical : Profiler SNMP Request Failure : Server

    Ok, so this alarm is coming in repeatedly and is now on my projects list.  I get email alerts from the server that list thr NAD IP as the endpoint device and the Endpoint IP address is correct.  I've checked the settings and the endpoint is not listed as a NAD in ISE (ver 1.2).
    Profiler SNMP Request Failure
    Details :
    Profiler SNMP Request Failure : Server=xxx-xxx-xxx; NAD Address=10.253.124.194; Endpoint IP Address=10.253.124.194
    Description :
    SNMP request times out, or SNMP community/user auth data is incorrect.
    Suggested Actions :
    Please ensure if SNMP is running on the NAD and verify that SNMP configuration on ISE matches on NAD
    *** This message is generated by Cisco Identity Services Engine (ISE) ***
    Has anyone seen this come in before?
    PS - Why is the IOS for ISE so cut down?  Looks like something you would get from an Apple product.
    Thanks,
    Clark

    Hello,
    Please follow below CiscoLink:
    http://www.cisco.com/en/US/docs/security/ise/1.2/user_guide/ise_mnt.html
    Profiler SNMP Request Failure
    Either the SNMP request timed out or the SNMP community or user authentication data is incorrect.
    Ensure that SNMP is running on the NAD and verify that SNMP configuration on Cisco ISE matches with NAD.
    Also ensure what snmp version device is using.
    Thanks,

  • Uploading Photos to MobileMe Gallery results in "Request to Server Failed"

    Hello everyone!
    I've run across a very frustrating problem.
    I am wanting to upload some photos to a MobileMe gallery from within iPhoto '08 (Version 7.1.4; Mac OS X 10.4.11). When I start the upload, it runs for several minutes and the progress bar appears with the message "Uploading Thumbnails". After several minutes of this (usually the progress bar gets about 1/4 of the way through), I get an error message that says "Request to Server Failed". If I try to then restart the upload by clicking on the alert icon next to the gallery name in the sidebar, the gallery disappears.
    I have tried deleting the iPhoto caches from ~/Library/Caches and the "com.apple.iPhoto.plist" file from ~/Library/Preferences. I have logged out of MobileMe from System Preferences and had iPhoto log me back in. Nothing seems to work. I keep getting this error.
    I have published photos to .Mac Gallery in the past (but not since the transition to MobileMe. Those galleries are still there on the web and listed in the sidebar. I'm afraid of messing with them though for fear that they too will disappear.
    I've done Google searches and searches here on Apple Discussions and found no definite solutions.
    I could really use some help on this one. Any assistance would be greatly appreciated!
    Thank you!

    How many galleries do you have? If only a few try deleting them manually from the iDisk/Web/Sites/_gallery folder and republish from iPhoto.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

  • Unknown Host Unable to locate the server requested --- the server does not have a DNS entry. Perhaps there is a misspelling in the server name, or the server no

    Hello,
    Today i tried accessing transitbux.com with mozilla, but i'm getting this kind of a error as mentioned below:
    Unknown Host
    Description: Unable to locate the server requested --- the server does not have a DNS entry. Perhaps there is a misspelling in the server name, or the server no longer exists. Double-check the name and try again.
    Can anyone help me please, and the same website is accessible with my phone.
    Help me please. :(
    Regards
    -

    Try http://www.transitbux.com/
    Clear the cache and remove cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"

  • Fatal error: Client does not support authentication protocol requested by server; consider upgrading MySQL client

    Fatal error: Client does not support authentication protocol
    requested by server; consider upgrading MySQL client in
    /homepages/28/d74942468/htdocs/cosmic/sites/onlinemove/Connections/db.php
    on line 9
    This is the error that comes up on the server where the site
    sits. The database is working on my local machine with the local
    settings, but wont connect due to the above.
    I think im using MySQL client 3.23 How do i upgrade?
    I found this on MySQL site:
    http://dev.mysql.com/doc/refman/5.0/en/old-client.html
    I'm not sure how to edit the connection string to make it
    accept the vaules.

    The_FedEx_Guy wrote:
    > Fatal error: Client does not support authentication
    protocol requested by
    > server; consider upgrading MySQL client in
    >
    /homepages/28/d74942468/htdocs/cosmic/sites/onlinemove/Connections/db.php
    on
    > line 9
    > I think im using MySQL client 3.23 How do i upgrade?
    The MySQL client that the error refers to isn't the version
    of MySQL,
    but the MySQL library bundled with PHP. It sounds as though
    your hosting
    company has upgraded to MySQL 4.1 or higher, but is still
    using PHP 4.
    > I'm not sure how to edit the connection string to make
    it accept the vaules.
    You can't. It's the way that the user account passwords are
    stored in
    MySQL. You need to get the hosting company to upgrade to PHP
    5 or to
    reset the passwords in MySQL using the OLD_PASSWORD()
    function. This
    needs to be done by someone with top-level administrative
    privileges on
    the database.
    David Powers, Adobe Community Expert
    Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
    Author, "PHP Solutions" (friends of ED)
    http://foundationphp.com/

  • Iphoto/MobileMe request to server failed

    In attempting to publish an iPhoto album (Life '09) on MobileMe after loading the thumbnails, I receive a message that it cannot publish that album "request to server failed". I have Life '09 version of iPhoto and my MobileMe account is working well otherwise for mail. When I look at my Gallery on MobileMe I see the name of the album I am trying to publish and only when I mouseover the blank box which should show the photos do I see the photos. beneath the box it is written, "no photos". I have previously published four albums with no problem. Is there a problem with the MobileMe Server or with iPhoto?

    It's very frustrating when these things don't work and extremely time consuming when solving these issues ...but persistence does pay off!
    Initially I had exactly the same issue. I then tested to see if I could publish another set of photos to my Mobile Me account from one of my other macs, and presto, no issues!!
    I then proceeded to copy all the photos from one computer to the other. Once done I had a dialogue box that told me there was an issue with one photo and I could not transfer it to my MacBook Pro ...that's when I found out that this photo was causing a "request to server failed" error! I deleted the photo, and tried again. Now it's happy, and my album is uploaded to MobileMe.
    Sometimes the smallest of problems become the biggest, it's worth cross checking all your bases

  • IPhoto getting Request to Server failed

    Folks,
    I have the same problem while publishing iPhoto (request to server failed) since I upgraded to MobileMe. I sent an email to Mac support I have not received any response yet. I tried the chat support I was waiting for more than an hour with no luck. Please help.

    Welcome to the Apple Discussions. There's not much anyone can do. It's a problem with the servers but should have been fixed by now. I've been able to publish since Saturday w/o problems - slow sometimes but it would go thru.
    Can you log in to MobileMe online at this page? Also check your System/MobileMe preference pane and make sure you're logged in.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

  • Incomplete Oracle BI Server Suite configuration

    Hi, experts,
    I have only installed the adminitration tool on a PC.
    on that PC, I grant the whole folder including the files to Power Users (a local user group).
    That I use one user in that group to login.
    I run the administration tool.
    I see this message "Incomplete Oracle BI Server Suite configuration"

    hi,
    Have a look
    schconfig error
    thanks,
    saichand.v

  • Request to server failed-message I get when trying to publish to MobileMe

    Hi-I am having issues with my iPhoto '09 publishing to MobileMe Gallery. I have had 2 chats with MobileMe technicians and after a lengthy discussion it appears that it's a problem with iPhoto '09. I get a message that the request to server failed. It attempts to publish but then I get that message.
    In talking with the MobileMe guys I tried all sorts of things: logging in to MobileMe with a test MobileMe user name and password; tried publishing just one photo; I had repaired permissions already; logged out of my main admin account and logged into a test user account (this was the only method that worked to publish) and; uploaded pictures from my MobileMe Gallery to iPhoto (this worked). There were all sort of other tricks I tried but I can't remember them all.
    I should mention that earlier this week I had an issue that resulted in me having to do an Erase and Install of my operating system. My MBP had an "Invalid Node Structure." I restored my stuff from my Time Machine backup and all seems to be working fine except for publishing to MobileMe. I also installed the 10.6.2 Combo update thinking that maybe there was a small piece missing from the update I did via Software Update. It didn't make any difference.
    I also used my husband's MacBook to see if I could publish from his iPhoto '08 and yes, I was able to.
    The last MobileMe guy I talked to said to talk to Apple but since I am not home and don't have my case number with me, I thought I'd try posting here first.
    I have some great pictures of my grandson that are just waiting for my family to see so I would be grateful if someone could help me. One thing I was wondering is that when I installed my operating system, I did not install any apps from the Application disk-could that be the problem? Well, anyway, any help would be appreciated! Judy

    Let me summarize what you've tried:
    1 - deleted iPhoto's pref file.
    2 - cleared the cache by logging out of MMe (System/MMe preference pane), logging in with bogus username and password which clears the cache and then logging back in with the correct username and password.
    logged out of my main admin account and logged into a test user account (this was the only method that worked to publish) and; uploaded pictures from my MobileMe Gallery to iPhoto (this worked).
    That indicates that there's something amiss with your primary account that is causing the problem. It could be a preference file other than iPhoto's. Here's how to determine if that's the case:
    Trouble Shooting Preferences in Leopard
    1 - Create a folder titled "Preferences A" on the Desktop.
    2 - Open the working Preferences folder, HD/Users/your_name/Library/Preferences, and move the contents to the Preferences A folder on the Desktop.
    3 - With the working Preferences folder empty run the application again and determine if the problems is fixed.
    NOTE: you may have to drag the contents of the working folder to the trash and empty if moving the contents to the A folder only copies them instead of moving.
    4 - If the problem is fixed:
    A - open the working Preferences folder (HD/Users/your_name/Library/Preferences).
    B - Open the Preferences A folder on the Desktop, select all of the contents and drag them into the working Preferences folder.
    C - When the Copy window pops up check the "Apply to All" check box and then click on the Don't Replace button.
    Click to view full size
    5 - If the problem is NOT fixed, empty the working Preferencess folder and move the contents of the Preferences folder on the desktop back into it.

  • Oracle ADF - multiple requests to server for just one click

    Hi,
    I am using jDev 11.1.1.4.0
    In my application when I want to navigate from one page to another,
    Two requests for server are,
    one for current page and other for requested page.
    The result is fine,
    but why does these 2 requests?
    I have used filters, one of those is,
    <filter>
        <filter-name>SessionCheckFilter</filter-name>
        <filter-class>sample.webapp.filter.SessionCheckFilter</filter-class>
      </filter>
    <filter-mapping>
        <filter-name>SessionCheckFilter</filter-name>
        <url-pattern>/faces/*</url-pattern>
      </filter-mapping>At first I thought it is happening because of URL pattern, i.e. both pages have same URL pattern.
    But I have more than 2 pages which has same pattern.
    Appreciate your help.
    Thanks,
    Madhav

    Hi,
    I am using jDev 11.1.1.4.0
    In my application when I want to navigate from one page to another,
    Two requests for server are,
    one for current page and other for requested page.
    The result is fine,
    but why does these 2 requests?
    I have used filters, one of those is,
    <filter>
        <filter-name>SessionCheckFilter</filter-name>
        <filter-class>sample.webapp.filter.SessionCheckFilter</filter-class>
      </filter>
    <filter-mapping>
        <filter-name>SessionCheckFilter</filter-name>
        <url-pattern>/faces/*</url-pattern>
      </filter-mapping>At first I thought it is happening because of URL pattern, i.e. both pages have same URL pattern.
    But I have more than 2 pages which has same pattern.
    Appreciate your help.
    Thanks,
    Madhav

  • Incomplete request/response operation missing send

    Brief on orchestration whihc have request response port(published as WCF service)
    1. receive(initialize co-relation)
    2. Looping and do some operation(in scope and exception handling)
    3.listen with receive(follow co-relation )& dynamic set delay shape(this step is also in loop, delay continues untill second request is received)
    4. construct resp message and send
    getting build error incomplete request/response operation missing send

    You have a loop shape, and obviously an condition associated to that loop.
    Now consider a scenario: you receive a message - and your loop condition is not met. In such cases you are coming out of loop (after receiving a message), and you will not be able to send anything back on the Req/Res port. Hence the Compiler restricts you
    this way.
    Thanks
    Abhishek

  • How does Flash send outgoing HTTP request to server?

    Hello everyone,
    I would like to know how Flash sends outgoing HTTP requests.
    I would like to know when from the inside of a Flash SWF file
    request for another SWF or FLV file is made; how the Flash sends
    this request to server.
    Thank you very much and have a great day,
    Khoramdin

    Hello everyone,
    I would like to know how Flash sends outgoing HTTP requests.
    I would like to know when from the inside of a Flash SWF file
    request for another SWF or FLV file is made; how the Flash sends
    this request to server.
    Thank you very much and have a great day,
    Khoramdin

Maybe you are looking for


HashFlare