Inserting flash .swf file into template

I want to insert a flash file into the right sidebar to appear on all pages of the website. I know I need to do this via the template. I think I need to click in the insertion point, then copy the code (make sure the files are in the correct location). I've done this before with galleries ect.. but not in DW and not from a template. What's a little confusing is there are 3 templates. The first is in it's own folder (design template), the other two (theme 01 design & theme 01 design from template) are in the root folder, but the theme 01 design one doesn't seem to be changeale. Which template should I be working with?
www.wranglergirl.net
Thanks from a newbie! Amy

Are each of these 'templates' actually DW templates (i.e., are they named with a *.dwt extension)? If so, then they must all be located within the Templates folder at the root level of the site - it doesn't sound like that is the case. Also, why do you need three templates? Finally, which version of DW are you using? It's likely that you will have to make any links to your Flash element with ROOT relative links to be successful.

Similar Messages

Bringing Flash .swf files into Captivate

Greetings,
I use Captivate 2.0. I have been trying to bring a Flash .swf
file into Captivate with very little success. The flash file is
clickable (so that users can review case study information as they
complete Try It simulations). When I bring the Flash .swf file into
Captivate, it works. However, correction (or failure messages)
display every time the user clicks the Flash .swf file. Is there
anything that I can do within Captivate to stop this issue?
Ideally, I would like the Flash .swf to run on top of the Captivate
file so that users can view the case study details without having
to see the failure messages.
Please let me know if you have any questions about this. I
hope it makes sense to you.

Hi Zabcde (or PMW or P?)
Can I just understand (sorry for being thick) your situation.
You're trying to get a flash movie into a captivate session that
the user can work on, see, interact with whilst they're also going
through a Captivate simulation (try it)? Does that mean that slides
are advancing for the simulation whilst you're watching the flash
movie? Or are they watching the Flash movie as a kind of help to
then go and do the Try It session?
If it's the first, then I would suggest calling the Flash swf
and the Captivate swf as seperate instances in flash (using
loadmovienum or something). If it's the second, you should be able
to remove the failure captions from that slide so they don't bug
you.
Apologies if I've got the wrong end of the stick though
Cheers
AJ (jiminiCricket)

Insert an swf file into another Flash file

Hi,
I'm a newbie to flash trying to insert an SWF flash file (a game) into another Flash file. However, when I import the swf file into the library and drag it onto the frame (and insert the stop(); command onto the frame action to stop it playing the whole movie), the SWF file plays constantly, ignoring all the actionscript and button commands in the game SWF file.
When I try inserting it using the Window component, the game SWF refuses to play at all - it just stops (clicking buttons in the game work, but it goes-to-and-stops instead of go-to-and-play like it's supposed to do). The only other component I could find was called "Loader". Using this doesn't work either, it won't play any of the animation, just like using the "Window" component
When the game SWF is played by itself (by just double-clicking to open it from Windows Explorer or embedding it in a web page), it works fine.
Any help how to do this would be appreciated.
Thanks.

Hi,
I'm posting in this thread because my problem seems similar but may be not...
In my first swf, I'm loading a second swf via loadClip().
My second swf works well alone but when I try to integrate itself in my first swf I'm losing my events. My events only works on my first swf.
I'v tried your trick with _lockroot but he doesn't work for me too.
Is someone have an idea to help me ?
Thx
My code is really basic
First swf:
        var mcloader:MovieClipLoader = new MovieClipLoader();
        var listener:Object = new Object();
        listener.onLoadInit = function (mc:MovieClip){
            main_obj.__preloader.die();
            obj[funct](target_mc, param);
        mcloader.addListener(listener);
        mcloader.loadClip(file_name, __loader);
Second swf:
    var box:MovieClip = this.createEmptyMovieClip("box"+depth, this.getNextHighestDepth());
    //Draw box
    drawBox(...);
    // Event on Box, Change Alpha and show arrow or not
    box.onRollOver = function() {
        drawBox(...);

Changing flash .SWF file into Keynote presentation

Someone please help.. presentation in 8 hours and I want to use Keynote but the presentation is in flash .swf and the directions I got didnt work- they were:
Use Flash MX to save the file as a Flash 5 movie. It should have a filename extension of ".swf". Important: Keynote cannot import native Flash files whose filename extension is ".fla".
In Keynote, Choose Edit > Place > Choose.
Select the file and click Place to insert it into your slide.
I choose edit but theres no option that says place, how do I read my swf file through Keynote?
Thanks everyone!
Daniel

That kind of thing is not done in Fireworks, which is a graphics
application; it should be done in a web page editing program such as
Dreamweaver. Generally, Fireworks HTML is not acceptable for final
production web sites unless you're exporting as CSS and Images, and
even then, it will most likely require tweaking in a web page editor.
HTH
Jim Babbage

Insert a .SWF file into a Index.html

Im making a website which is all in flash and now I have to
insert the Master.swf file in dreamweaver Index.html so i can
upload it on the web. Ive done all that but when I try and run the
Preview in Safari it just shows up blank.
In Dreamweaver i can play the master.swf file and it works
but not in Preview mode.
I looked all over the net for answers but nothing yet. Can
anyone help me.......................Please!

> Im making a website which is all in flash
Too bad. You know what the downsides of this are, right?
> In Dreamweaver i can play the master.swf file and it
works but not in
> Preview
> mode.
Upload your page so we can see the code, please.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"ParadoxSwitch" <[email protected]> wrote in
message
news:gan9kr$7tt$[email protected]..
> Im making a website which is all in flash and now I have
to insert the
> Master.swf file in dreamweaver Index.html so i can
upload it on the web.
> Ive
> done all that but when I try and run the Preview in
Safari it just shows
> up
> blank.
> In Dreamweaver i can play the master.swf file and it
works but not in
> Preview
> mode.
>
> I looked all over the net for answers but nothing yet.
Can anyone help
> me.......................Please!
>

How to upload and embed Flash SWF file into Google Blogger?

This is my blog URL http://www.aviationandengineering.com

One way is to upload video to blogger. but there is a format problem. I recommend using the H.264 codec with your original file format, and if the file is still too big, switching file formats to .mp4(you can use the SWF video Converter to convert swf to mp4).
The other way is upload to Youtube or another video hosting site, you canembed the video directly into Blogger. There is still a format problem. Youtube can't support SWF video files, so you still need a SWF to Video converter to convert swf to Youtube supported video files and MP4 is the best choice.
Hope this can help you.

Inserting swf file into dw vs. creating full site in flash

I'm updating a website, and am pretty familiar w/html and DreamWeaver, but would like to add some elements of Flash into the site. I am using Flash CS4.
What is the advantage and/disadvantage of inserting various swf files into my DW site versus just creating the entire site in Flash; what's the difference in either approach?
If I do the latter, do I eventually bring it into DW anyways so that it is an html file?
Thanks for your help!

There can be potential issues with Flash content in a web site since the evolution of iStuff led to disallowing Flash content to be displayed. If you are looking to attract a mobile user base, then going with Flash can be a gamble, especially as you go further on into the future where there will no longer be Flash Player development to parallel the mobile market.
I have heard that Flash content does not support handicapable design elements that html/css provide for.
You can always have the web page code check for the availability of the Flash Player, and if not found have alternative content presented instead.
An issue with having a full Flash site is that it can be less SEO friendly than going with straight html-based designed, although since the Flash content would still reside in an html page there are some measures that can be taken to support SEO concerns.
For a full Flash site design you would probably not need DW since Flash can generate an html page of its own.
I recommend you post your questions in the Dreamweaver forum as well. The reaction there to using Flash content is likely to be harsh, so don't take it personally, but some helpful information might still be gleamed from trying.

Insert Photoshop Web Gallery swf file into Dreamweaver

So i tried to take a shortcut, and created a flash photoshop
web gallery and placed the "gallery.swf" file into my html file in
Dreamweaver. However, it is showing a blank white screen (i'm
guessing it can't find the images?) but when I view it on my hard
drive, it is working fine, just not in dreamweaver or any browser,
even after I upload to my server. Any help would be GREATLY
appreciated!! I've also tried pasting the body html code from
"index.htm" that photoshop creates, as well as move my image files
to the root folder where the swf is, but that doesn't work either.
I have my scripts in the same directory, and not in
subfolders.

Kizat727 posted in macromedia.dreamweaver:
> and the link is
>
> www.micromediapubs2.com/dyers/portfolio.html
That page is very different from the code you posted and I
know nothing
about Geoff Stearns' FlashObject code.
For the above link, I see nothing in the source code that
attempts to
load a .swf file. However, it is linking to
AC_RunActiveCon.js file in
the wrong place:
GET /dyers/assets/flash/pages/AC_RunActiveContent.js HTTP/1.1
Referer:
http://www.micromediapubs2.com/dyers/portfolio.html
HTTP/1.x 404 Not Found
The file is actually here:
/dyers/Scripts/AC_RunActiveContent.js
So if you actually do have a page in the dyers/ folder that
links to a
.swf file, just make sure the link to the .js file is
correct.
Most likely, change this:
<script src="assets/flash/pages/AC_RunActiveContent.js"
type="text/javascript"></script>
to this:
<script src="Scripts/AC_RunActiveContent.js"
type="text/javascript"></script>
Mark A. Boyd
Keep-On-Learnin' :)

Importing another swf file into the flash-homepage (swf is a gallery)

hi there!
have a problem that i cant resolve myself ..
i downloaded a free of use gallery from juliuswebdesign.com (this gallery) and i'm trying to load it in my flash site ..
now, the gallery works if i open it directly (i open the swf file)
BUT
when i try to load the external swf file into my site
loadMovie("image_gallery.swf", box);
then the movie loads .. the gallery is displayed the message "loading xml file" displays and then when the xml is loaded the message "loading image 1/7" displays and only the first image loads.
once the first image is loaded it will not be displayed (it remains outside of my swf file .. i can see it when i resize the window) and no other images will be loaded.
if i open the gallery.sfw file again everything works fine .. the problem is only if i try to load the gallery.swf in another swf ..
something must be wrong ..
i tryed to opern the gallery.fla file and copt everything directly in my site and the problem remains the same .. only 1 image loaded and not displayed in the gallery ..
i'ts like something in my site "blocks" the gallery beeing loaded..
any suggestions?

to the gallery's fla add the following and retest:
this._lockroot = true;

Getting .CP or .Swf files into .FLV

Hello:
I used Captivate to create 3 e-learning modules. My hope is
to deliver them via web. When enclosing the SWF files into a web
page, the application takes **FOREVER** to load (3 minutes). So,
after looking into retaining a streaming web host, I discovered
that I need an .FLV file to stream adequately.
Exporting my .CP files to Flash 8 results in drastically
degraded quality and un-synched audio and animation. Exporting the
.FLA file to .AVI is even worse. I can't seem to de-compile my .CP
file to any other Flash application in a way that maintains the
qualtiy. The SWF files are beautiful, but they can't be used to
stream.
Does anybody have any answers?

Hi, TriSys G!
If I'm understanding "lightning speed" playback of embedded
.swfs, it sounds like a frames per second (fps) mismatch. By
default Adobe Captivate records and plays back at 30 fps. However,
if the .swf you are inserting as animation was created at a
different fps rate, you can end up with the scenario you outline.
The best solution would be to go back to the original
developer of the .swf and have them re-compile at 30 fps. Of course
the developer may not be available.
The alternative is to go the other way. If you know the fps
of the swf you are embedding, you can adjust your movie's frame
rate to match the .swf. Here's the command path for that:
Project>>Preferences>>Preferences>>Frames Per
Second.
BTW, since this thread was created to answer a different
question, next time I'd suggest create a new topic so we can see
more quickly
john

Dynamic swf file into dreamweaver cs4

Good evening to all,
Can a basic slide show created in Flash cs4 using as2 to load the images dynamically be inserted into a Dreamweaver cs4 page ?
The swf file shows up but I can't figure out where to put the linking images so the 2 basic "next" and "previous" buttons work ?
Thank as always,
Fred...

When you load the swf file into the html page, that becomes the swf's reference for loading files. So if your structure has a folder containing the html file and another folder for the flash file and another folder for the images, as in...
main_folder...
     - html file
     - flash folder
          - - flash file
     - images folder
          - - image files
then you need to change where the swf file is looking for the images because when it is in the html page, that is essentially the folder it is trying to get the images to load thru.
For instance, if you originally tested using Flash with the swf file targeting the images using...
"../images/imagefile.jpg"
(or something like that... those dots confuse me at times)
and the structure is as I described, then when testing in the html file the targeting would need to be changed to...
"images/imagefile.jpg"
Just think of the swf file as living in the html file's folder as far as targeting any files it needs to load, because once it is loaded into that page, it has basically moved to that new location.

I need to combine 2 swf files into 1 file

I have a flash template that is controled by basicly 3 files website.swf, text.xml and index.html (there are a lot of supporting files) When i put a video.swf in the xml file it runs with the website.swf as long as I don't turn on the sound on the video.swf because it will not stop. So I needed some controls on the video.swf which is the skinunderall.swf, but the file comes in 2 pieces and will not intergrate on the website.swf. I have about 18 video.swf files and they all need to be controlled by the user on the site. Is there anyway to combine video.swf and the skinunderall.swf to ONE file with the controls? I will settle for a start stop button, however once the file starts I can't touch it--it seems. But I have turn the video.swf into a link and it was clickable.
I read the captive thing but it seems to be out of date. Oh yeah and I am a page one (begining) coder.
Any help?

Hi,
"combine 2 swf files into 1 file" is a pretty abstract question. The short answer is - yes, you can, but you need an appropriate software tool for that. But really it's not clear (for me) how all your files work together exactly. The only what I can derive from your explanation, is that you need to add an interactive control to some SWF files with embedded video, loadable into the main "envelope".
In general all what you need are:
- you must have some named mc within your "main" SWF, which will load your video SWF's into itself by loadMovie() function.
- you need to have some controls (buttons, etc.) in your "main" movie. which will control this mc playback - mc.play(), mc.stop(), etc.
I'm almost sure it's resolvable problem, but can you upload this template to let us see how it all works now? If you don't wish to disclose it all publically, then you may write to me personally. You can find email address at the bottom of the webpage in my signature.
FlashDigger
www.flashdig.com

Problems loading Adobe Flash SWF file

Our users are experienceing problems loading Adobe Flash SWF
files.
One example of a problem file is:
http://www.adobe.com/enterprise/accessibility/popup_acr8_accessibility.html
User traffic is flowing through a Cisco ASA firewall - these
problems do not seem to occur from home networks or a Netscreen
firewall. The Cisco ASA does NOT have http deep packet inspection
turned on, and any traffic initiated by clients inside the firewall
should be allowed. The symptom is that Internet Explorer will begin
to download the video, but will hang at some point along the way
(for this particular URL it hangs at about 7%). No error messages
are displayed, but the video never displays on the screen either. I
would appreciate hearing from anyone who may have run into this
before, or if someone can explain what is different about this type
of file from regular Adobe Flash, that might help figure out what
the ASA is objecting to. The ASA does not appear to generate any
log messages about denying this type of traffic either.
Thanks in advance for any help you can provide...

Thanks, but I use publish/export settings with GPU hardware acceleration and flash version 11.2 (and 11.8) but nothing happening.
And why gif file is not all transparenty then I insert on lightblue background? It can't export good quality? Also I use Photoshop, After Effects, Adobe Edge Animate. And nothing happening. Egde animate file .oam is not good for old website navigation. It can't be inserted in freeshop site from navigation... I use logo file .oam just for example here - http://e-shoptagras.graphicsrim.eu
In reality I want swf file, but we don't find why logo flickering? here http://tagraseshop.graphicsrim.eu
All file's are transparenty - https://mega.co.nz/#!f8B2CD5R!J8uCJt9Sdq4Suz4HLhTHz8bzJcSWXMBIKcKZgkD3z8c
I need help! Please!

Can I combine two methods of code to load various SWF files into the same location

I presently have a set up where a large SWF file brought on the stage by clicking small icons from the scrollable thumbnail menu on the bottom of the stage. All of it happens at the same frame with .xml loading file.
Here is the code for constructing the ImageLoader(for thumbnails) and SWFLoader for (bigger SWF files)
[CODE]
   function _xmlCompleteHandler(event:LoaderEvent):void {
   _slides = [];
   var xml:XML = event.target.content; //the XMLLoader's "content" is the XML that was loaded.
   var imageList:XMLList = xml.image; //In the XML, we have <image /> nodes with all the info we need.
   //loop through each <image /> node and create a Slide object for each.
   for each (var image:XML in imageList) {
    _slides.push( new Slide(image.@name,
          image.@description,
          new ImageLoader("loadingAssets/appThumbnails/slideshow_image scroller greenSock_mine/assets/thumbnails/appThmb_imgs/" + image.@name + ".jpg",
               name:image.@name + "Thumb",
               width:_THUMB_WIDTH,
               height:_THUMB_HEIGHT,
               //centerRegistration:true,//messes up the code as places SWFLoader in the upper left corner which is 0,0 coordinates
               //x:260, y:320,//doesn't work here but works in line 69
               scaleMode:"proportionalInside",
               bgColor:0x000000,
               estimatedBytes:13000,
               onFail:_imageFailHandler}),
          new SWFLoader("loadingAssets/appThumbnails/slideshow_image scroller greenSock_mine/assets/images/" + image.@name + ".swf",
                name:image.@name + "Image",
                width:_IMAGE_WIDTH,
                height:_IMAGE_HEIGHT,
                //centerRegistration:true,//messes up the code as places SWFLoader in the upper left corner which is 0,0 coordinates
                x:0, y:144,
                scaleMode:"proportionalInside",
                bgColor:0x000000,
                estimatedBytes:820000,
                onFail:_imageFailHandler})
[/CODE]
Here is what I would like to resolve. I have another section on the site with an image collage. Every image is a button. I want to script this each image on click to go to the label with ImageLoader and SWFLoader AND TO OPEN A UNIQUE SWF (ASSOCIATED WITH AN IMAGE CLICKED) ON THAT PAGE
Previously this is what I did to achieve it. I would specify a String:
[CODE]
var sourceVar_ProductsPopUps:String;
[/CODE]
and then all my buttons will have their unique SWF assigned for them which opens at another labeled section ("prdctsPopUps" in this example):
[CODE]
function onClickSumix1PopUp(event:MouseEvent):void {
sourceVar_ProductsPopUps="prdcts_popups/sumix1-popup_tl.swf";
gotoAndPlay("prdctsPopUps");
[/CODE]
Then in the "prdctsPopUps" section I would specify that var string to bring up SWF files. The value of sourceVar_ProductsPopUps allows to load mulitple SWFs from the previous page.
[CODE]
loaderProductPopUps = new SWFLoader(sourceVar_ProductsPopUps,
[/CODE]
But I need both of them to be working at the same time. First there is a sectionA from where a user can navigate to specifically targeted SWF to section B's SWFLoader. Then in the section B a user has an option to bring up other SWF files into SWFLoader from the scrollable thumbs menu. Is there a way to combine these two lines into one:
[CODE]
          new SWFLoader("loadingAssets/appThumbnails/slideshow_image scroller greenSock_mine/assets/images/" + image.@name + ".swf",
[/CODE]
and
[CODE]
new SWFLoader(sourceVar_ProductsPopUps,
[/CODE]

Thanks for looking into my issue.
Unfortunatelly I am not so advanced in AS and do not complitely understand the logic of the problem. I will try to decribe my set up more precise.
So, my main flash file is broken into labeled sections on the main time line.
One of the sections is "Applications" It has an animated collage of images. Each image acts as a button and once clicked brings a user to a section called "ApplicationsPopUps".
"ApplicationsPopUps" section has small image thumbnails scroll menu at the bottom of the screen and a large SWFLoader in the middle of the screen. User can click on an image in the thumbnails scroll menu and a corresponding SWF file will load in the middle of the screen in SWFLoader. User can click on left/right navigation buttons and preceeding/following SWF file will load in SWFLoader.
Everything works fine (with your previous help)
Here is the working code for the ImageLoader and SWFLoader (please let me know if you need additional code on the page):
function _xmlCompleteHandler(event:LoaderEvent):void {        _slides = [];       var xml:XML = event.target.content; //the XMLLoader's "content" is the XML that was loaded.        var imageList:XMLList = xml.image; //In the XML, we have nodes with all the info we need.        //loop through each node and create a Slide object for each.       for each (var image:XML in imageList) {         _slides.push( new Slide(image.@name,               image.@description,               new ImageLoader("loadingAssets/appThumbnails/slideshow_image scroller greenSock_mine/assets/thumbnails/appThmb_imgs/" + image.@name + ".jpg",               {                    name:image.@name + "Thumb",                    width:_THUMB_WIDTH,                    height:_THUMB_HEIGHT,                    //centerRegistration:true,//messes up the code as places SWFLoader in the upper left corner which is 0,0 coordinates                    //x:260, y:320,//doesn't work here but works in line 69                   scaleMode:"proportionalInside",                    bgColor:0x000000,                    estimatedBytes:13000,                    onFail:_imageFailHandler}),                 new SWFLoader("loadingAssets/appThumbnails/slideshow_image scroller greenSock_mine/assets/images/" + image.@name + ".swf",                   {                     name:image.@name + "Image",                     width:_IMAGE_WIDTH,                     height:_IMAGE_HEIGHT,                     //centerRegistration:true,//messes up the code as places SWFLoader in the upper left corner which is 0,0 coordinates                   x:0, y:144,                     scaleMode:"proportionalInside",                     bgColor:0x000000,                     estimatedBytes:820000,                     onFail:_imageFailHandler})
Thumbnails in the section "ApplicationsPopUps" and images in the image collage in the section "Applications" represent the same photographs. So when a user clicks on one of the images in "Applications" section it would be natural that that image will load in the "ApplicationsPopUps" section. However "ApplicationsPopUps" section presently has a working code (as sampled above) It looks too complex for me and I do not know hot to implement this feature. I do want to keep the functionality of the thumbs image scroller in section "ApplicationsPopUps" as it is now. But I want to add that when a user click on an image from section"Applications" then that particular SWF file will load in SWFLoader in section "ApplicationsPopUps" and then the present functionality can as well be exectuted. Presently it just opens on a first image in xml order.
P.S. I see that you had a download link in your answer. How did you do it? I could also upload a small sample file with my problem. This way you could see all the set up right away.

How to insert a swf file in to flex..

hi all
i'm trying to insert a swf file in my flex. I'm trying to insert a help manual e-book to my flex application,
i dont have any idea in flex... i have some 1 month experiance in flex...
so plzzz help me...

Are you just looking to load an external swf into your flex application? Are there any requirements where the external swf has to be stored like on a different domain or can it be packaged with your Flex app?

Inserting flash .swf file into template

Similar Messages

Maybe you are looking for