Interactive Analysis using a non-BO WebService

Hi all,
I'v a question about the new version of WebI - Interactive Analysis.
Is it possible to build a report using a 3rd party WebService ?
If so, how to do this?
Thanks and best regards,
Silvia

Hi Slivia,
This new data provider was intended at allowing consumption of QaaWS queries (query as a web service) and BI Services (WebI report blocks as web services).
WebIntelligence can consume web services to use them as data providers with the condition that their WSDL reproduces QaaWS or BI Services structure.
Our plan for the future is to widen the scope of WSDL supported by WebI as web service data providers.
Hope that helps,
David.

Similar Messages

Interactive Analysis error when using BW BEx query as data source

Hello,
When we try to create a new report based on a BW BEx with the "Interactive Analaysis" tool in the BO 4.0 Launchpad, for all the BEx queries created under one of our multiproviders, we get the following error:
The DSL Service returned an error: com.businessobjects.mds.services.helpers.OlapUniverseHelper$DimensionsFromCubeFailedException: Cannot retrieve dimensions from cube Cartera de ventas (Ap)
     at com.businessobjects.mds.services.helpers.OlapUniverseHelper.createSapBusinessLayer(OlapUniverseHelper.java:444)
     at com.businessobjects.mds.services.helpers.OlapUniverseHelper.createBusinessLayer(OlapUniverseHelper.java:248)
     at com.businessobjects.dsl.services.workspace.impl.QueryViewAnalyzer.createOlapUniverse(QueryViewAnalyzer.java:286)
     at com.businessobjects.dsl.services.workspace.impl.QueryViewAnalyzer.createOlapUniverse(QueryViewAnalyzer.java:263)
     at com.businessobjects.dsl.services.datasource.impl.DirectOlapAccessUniverseProvider.provideUniverse(DirectOlapAccessUniverseProvider.java:97)
     at com.businessobjects.dsl.services.datasource.impl.DirectOlapAccessUniverseProvider.provideUniverseFromCms(DirectOlapAccessUniverseProvider.java:50)
     at
With BEX queries from other multiproviders we're not getting this error and however.
Moreover, if we try to create a new report with the "Analysis Edition for OLAP" tool in the BO Launchpad using these same problematic BEx queries, we don't get any errors with this other tool. The thing is that we need to create them with the Interactive Analaysis.
Does anybody know why we're getting this error in the "Interactive Analysis" tool and how can we solve it?
Any help would be very appreciated.
Thank you and regards,
Edited by: Juan Jose Catoira on Jul 28, 2011 2:46 PM
Edited by: Juan Jose Catoira on Jul 28, 2011 2:47 PM

Hey,
Did you find out any solution for this. I am also facing the same issue.
Thanks in advance.

Interactive Analysis Desktop in use with PostgreSQL DB and ODBC

Hello, is it possible to use the Interactive Analysis Desktop with commercial databases? Specifically, PostgreSQL? But it would also be helpful to use with MySQL and MS SQL.
If so, would it be possible to connect using ODBC or DSN? Please let me know.

You need to use bind variables.
Define a PHP variable for master key. Parse the following anonymous PL/SQL block:
begin
get_unique_master_key('DEMO','CMPL','SK','DWMT_TABLE', ? );
end;Bind the PHP master key to the bind variable. Execute.
Bind variables are input and/or output variables. In this case, you want to use it as an output variable in order to receive the master key value from the PL/SQL call.

Advantage of using SAP XI over webservices to interact with Biztalk

HI everyone,
We have biztalk as integration tool. I would like to know is it feasible to implement Biztalk with SAP XI to communicate with our SAP ECC server. I heard it will be over weight to use both Biztalk and SAP XI coz each will have its own message box and leads to more process time. So we are planning to use Biztalk with SAP webservices. So please let me know which is better as cost wise and work wise biztalk with SAP XI or Biztalk with SAP Web services.
SAP Guys please take some time to provide some useful information. it will be much appreciated.
cheers
ram

Ram,
This is a contentious issue.
In principle a middleware to middleware integration is against the basic ideas of EAI. We need to integrate applications and not middlewares, but in reality this is in most cases an inevitable situation.
This blog discusses a similar middleware- middleware integartion ( XI and WebMethods) . Use the tips and tricks in this blogs to understand the issue you need to address , etc,
/people/abhy.thomas/blog/2007/04/19/sap-xi--webmethods-integration-150-challenges-and-migration-strategies
Regards
Bhavesh

Interactive Analysis Desktop Error: c3_olap_error_en_10901 (WIS 10901)

Hi all,
Running BusinessObjects Enterprise XI 4.0 I built a business layer between a BW infocube as infoprovider and a while refreshing the webi report in interactive analysis desktop the above error message pops up.
I used the infoprovider successfully for a BEx query on which I run a "traditional" universe successfully. I further used those objects for a prototype in SBO explorer. Hence I don't see a reason why the Infocube isn't working for the new business layer. I am pretty sure the issue lies in between the infoprovider and the webi report.
Thanks for your inputs!
Sven
The detailed error message is:
com.businessobjects.sdk.core.server.CommunicationException$UnexpectedServerException: c3_olap_error_en_10901
     at com.businessobjects.sdk.core.exception.ExceptionBuilder.make(ExceptionBuilder.java:144)
     at com.businessobjects.sdk.core.exception.ExceptionBuilder.make(ExceptionBuilder.java:101)
     at com.businessobjects.sdk.core.server.common.CommonRequestHandler.afterProcessing(CommonRequestHandler.java:122)
     at com.businessobjects.sdk.core.server.internal.AbstractServer.processIt(AbstractServer.java:178)
     at com.businessobjects.sdk.core.server.internal.AbstractServer.process(AbstractServer.java:133)
     at com.businessobjects.sdk.core.server.internal.InstanceServer.process(InstanceServer.java:93)
     at com.sap.sl.sdk.services.util.ServerRequestProcessor.processServerRequest(ServerRequestProcessor.java:49)
     at com.sap.sl.sdk.dataprovider.service.DataProviderServiceImpl.processDataProviderCommand(DataProviderServiceImpl.java:366)
     at com.sap.sl.sdk.dataprovider.service.DataProviderServiceImpl.processDataProviderCommand(DataProviderServiceImpl.java:378)
     at com.sap.sl.sdk.dataprovider.service.DataProviderServiceImpl.run(DataProviderServiceImpl.java:164)
     at com.sap.sl.sdk.workspace.service.WorkspaceServiceImpl.run(WorkspaceServiceImpl.java:331)
     at com.sap.webi.ui.tasks.workflows.RunWorkspaceTask.doIt(RunWorkspaceTask.java:73)
     at com.sap.webi.ui.tasks.workflows.RunWorkspaceTask.doIt(RunWorkspaceTask.java:11)
     at com.sap.webi.toolkit.ui.tasks.WebITask.doInBackground(WebITask.java:109)
     at javax.swing.SwingWorker$1.call(SwingWorker.java:278)
     at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
     at java.util.concurrent.FutureTask.run(FutureTask.java:138)
     at javax.swing.SwingWorker.run(SwingWorker.java:317)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
     at java.lang.Thread.run(Thread.java:619)
Caused by: com.businessobjects.sdk.core.server.ServerException: c3_olap_error_en_10901
     at com.businessobjects.sdk.core.server.common.CommonRequestHandler.newServerException(CommonRequestHandler.java:237)
     at com.businessobjects.sdk.core.server.common.CommonRequestHandler.createAllServerExceptions(CommonRequestHandler.java:215)
     at com.businessobjects.sdk.core.server.common.CommonRequestHandler.afterProcessing(CommonRequestHandler.java:118)
     ... 18 more

HI ,
Even i'm facing the same error. Could you tell me which patch(details) is this and form where can i get it?
Thanks and regards,
Abhishek

Interactive reporting using web client in Hyperion Workspace

Hi all,
I was trying to create a new interactive report using following process:
1)Logon to Workspace using browser
2)File -> New -> document
3)select the option: "Create interactive reporting document"
4)Browse for .oce file
5)Click finish, once the .oce file is selected.
After these steps:
Initially I was getting message regarding checking web client status...
this was taking lots of time so I cancelled the process and restarted from step 1.
Now, after step 5, I am getting a file save option showing source of file as server of the Workspace.I am working on a local machine and accessing the workspace product through web browser.
If I save this file in local machine I don't get an option to open this file from workspace using :
File -> open -> document.
and alternatively if try to open this locally from the machine I don't have proper application on my local machine.
I am badly trapped in this viscious circle.... Kindly help.
Also, it will be gr8 if somebody could suggest some link for understanding the process of creating a new interactive report , using web client on workspace.
Thanks in advance..
Edited by: user12973893 on May 5, 2010 3:40 AM

Hi all,
I got to know that import and export option is available with "user->reports" and "file in report folder" respectively, when we go for Explore option.
So storing to local machine and retrieving it back is no more a problem.
But still I have hardly any idea as to how to start with interactive reporting in Workspace using web client.
If any of you come across any such tutorial on interactive reporting using web client on workspace please tell.
I come to know that Interactive reporting studio is available for interactive reporting purpose: any of you please tell me if "reporting and analysis client.." available on oracle edelivery is sufficient for interactive reporting studio or we need to install something specific for working with Interactive reporting studio.

Non Java Webservice client Authentication

I see in the Weblogic docs many examples of Java webservice clients. Including
one that passes a user id and password through the getXXXPort(userid, password)
call for authenticating the user at runtime. My question is, can a non Java webservice
client authenticate itself in somewhat the same manor? A non Java client wouldn't
have the client jar file available containing the stubs and all.
If someone has a code snippet they could send me it would be most appreciated.
Thanks,
Craig Lindley

Hi Craig,
An partial example using .NET is attached; in this environment you need
to use their NetworkCredential class.
Hope this helps,
Bruce
craig lindley wrote:
>
I see in the Weblogic docs many examples of Java webservice clients. Including
one that passes a user id and password through the getXXXPort(userid, password)
call for authenticating the user at runtime. My question is, can a non Java webservice
client authenticate itself in somewhat the same manor? A non Java client wouldn't
have the client jar file available containing the stubs and all.
If someone has a code snippet they could send me it would be most appreciated.
Thanks,
Craig Lindleyusing System;
using System.Net;
namespace SecurityBasicClient
class AuthClient
[STAThread]
static void Main(string[] args)
SoapInteropBaseService ws = new SoapInteropBaseService();
ws.Url = "http://webservice.bea.com:7001/base/SoapInteropBaseService";
Console.Write("User:");
string strUser = Console.ReadLine();
Console.Write("Password:");
string strPassword = Console.ReadLine();
ICredentials credentials = new NetworkCredential(strUser,strPassword);
try
ws.Credentials = credentials;
Console.WriteLine(ws.echoString("Hello World"));
catch (Exception err)
Console.WriteLine(err.Message);
finally
Console.ReadLine();

Down-/Upload files via Web Services using a NON-SAP system!?

Hello,
is it possible to down-/upload files via web services using a NON-SAP system!?
Regards,
Jens

Hi Jens,
I am not sure about your requirement here. What i could understand is that you want to check whether service could handle file processing?
1) Uploading file - You can build a Webservice which has import/export parameters as the file structures and implement the proxy class in such a way that the passed data is written to application server.
2) Downloading file - Same as uploading file, but the proxy class would have the code to extract data from the application server and pass them as output parameter.
Functionality of Non SAP system: The system which calls these services should be able to convert the output of proxy data into file in case of downloading the file and it should be able to convert the file data into export parameters in case of uploading file.
Hope this helps.
Regards,
Prasanna

First off, i think it's sad that i have to use my non apple device to post this question... Why has my iPad become absolutely useless after updating to iOS 8.1? I am unable to use my mini because it crashes, slow performance, major battery drain.

First off, i think it's sad that i have to use my non apple device to post this question... Why has my iPad become absolutely useless after updating to iOS 8.1? I am unable to use my mini because it crashes, slow performance, major battery drain.

Restore iPad to Factory Default; do not restore from backup. It may be the cause of the problem.
Settings>General>Reset>Erase all content and settings

Generated a report which gives PR(Purchase Requisition) analysis using ALV.

hi experts,
please give me tables and fields for following report, and also exlain me briefly,
Generated a report which gives PR(Purchase Requisition) analysis using ALV.
thanks in advance,
radhakrishna

Hi
please find this report which link SO PO PR and Prd Ord and there status.
>
REPORT z_so_info.
TABLES: vbak, vbap, afko, afpo.
*Field catalog
TYPE-POOLS: slis.
DATA: lv_repid TYPE sy-repid VALUE sy-repid,
xfield TYPE slis_t_fieldcat_alv,
afield TYPE slis_fieldcat_alv.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(25) text-002.
SELECT-OPTIONS: so_so FOR vbak-vbeln OBLIGATORY.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-003.
PARAMETERS:
p_kunnr LIKE vbak-kunnr, " sold-to
p_kunwe LIKE vbak-kunnr. " ship-to
SELECTION-SCREEN END OF BLOCK b2.
*Constants
CONSTANTS: c_zor TYPE vbak-auart VALUE 'ZOR',
c_we TYPE vbpa-parvw VALUE 'WE',
c_ag TYPE vbpa-parvw VALUE 'AG'.
c_space TYPE space.
*Ranges
RANGES: ra_parvw FOR vbpa-parvw,
ra_kunnr FOR vbpa-kunnr.
*Tables
DATA: BEGIN OF gt_output OCCURS 0,
vbeln LIKE vbak-vbeln, " sales order number
posnr LIKE vbap-posnr, " SO item number
matnr LIKE vbap-matnr, " material number
sh LIKE vbpa-kunnr, " Ship-to
sp LIKE vbpa-kunnr, " Sold-to
lifnr LIKE ekko-lifnr, " Vendor
bstnk LIKE vbak-bstnk, " PO number
banfn LIKE vbep-banfn, " Purchase requi
po_st TYPE char30, " PO status text
pstyv TYPE vbap-pstyv, " Item catagory
aufnr LIKE afpo-aufnr, " Production Order
prd_stat TYPE string, " Prd order status
END OF gt_output.
DATA: wa_output LIKE gt_output.
FIELD-SYMBOLS: <fs_output> LIKE gt_output.
*Table for sales order and PO
TYPES : BEGIN OF gs_data,
vbeln TYPE vbak-vbeln,
posnr TYPE vbap-posnr,
pstyv TYPE vbap-pstyv,
matnr TYPE vbap-matnr,
END OF gs_data.
DATA: gt_data TYPE STANDARD TABLE OF gs_data,
wa_data TYPE gs_data.
*Table for Production Orders
TYPES: BEGIN OF gs_prd,
aufnr TYPE afpo-aufnr,
posnr TYPE afpo-posnr,
kdauf TYPE afpo-kdauf,
kdpos TYPE afpo-kdpos,
wepos TYPE afpo-wepos, "Goods Receipt Indicator
elikz TYPE afpo-elikz, "Delivery Completed Indicator
objnr TYPE aufk-objnr, "Object number
getri TYPE afko-getri, "Confirmed Order Finish Date
gltri TYPE afko-gltri, "Actual finish date
END OF gs_prd.
DATA: gt_prd TYPE STANDARD TABLE OF gs_prd,
wa_prd TYPE gs_prd.
*Table for partner data
TYPES: BEGIN OF gs_partner,
vbeln TYPE vbak-vbeln,
posnr TYPE vbap-posnr,
parvw TYPE vbpa-parvw,
kunnr TYPE vbpa-kunnr,
END OF gs_partner.
DATA: gt_partner TYPE STANDARD TABLE OF gs_partner,
wa_partner TYPE gs_partner.
TYPES: BEGIN OF gs_po,
ebeln TYPE ekkn-ebeln,
ebelp TYPE ekkn-ebelp,
vbeln TYPE ekkn-vbeln,
vbelp TYPE ekkn-vbelp,
END OF gs_po.
DATA: gt_po TYPE STANDARD TABLE OF gs_po,
wa_po TYPE gs_po.
TYPES: BEGIN OF gs_preq,
vbeln TYPE vbep-vbeln,
posnr TYPE vbep-posnr,
banfn TYPE vbep-banfn,
END OF gs_preq.
DATA: gt_preq TYPE STANDARD TABLE OF gs_preq,
wa_preq TYPE gs_preq.
TYPES: BEGIN OF gs_po_stat,
ebeln TYPE ekko-ebeln,
procstat TYPE ekko-procstat,
lifnr TYPE ekko-lifnr,
END OF gs_po_stat.
DATA: gt_po_stat TYPE STANDARD TABLE OF gs_po_stat,
wa_po_stat TYPE gs_po_stat.
*Field symbols
FIELD-SYMBOLS: <fs> TYPE tj02t-txt04,
<fs_temp> TYPE tj02t-txt04,
<fs_stat> TYPE char30.
START-OF-SELECTION.
PERFORM fr_build_range.
PERFORM fr_get_data.
PERFORM fr_build_fc.
PERFORM fr_output.
*& Form fr_get_data
text
--> p1 text
<-- p2 text
FORM fr_get_data.
*Get SO
SELECT avbeln aposnr apstyv amatnr
FROM vbap AS a
JOIN vbak AS b
ON avbeln = bvbeln
JOIN vbpa AS c
ON bvbeln = cvbeln
INTO TABLE gt_data
WHERE b~vbeln IN so_so
AND b~auart EQ c_zor "Only Sales Orders
AND c~kunnr IN ra_kunnr. "from selection screen
DELETE ADJACENT DUPLICATES FROM gt_data COMPARING vbeln posnr.
*get data of the production order
IF NOT gt_data[] IS INITIAL.
SELECT aaufnr aposnr akdauf akdpos awepos aelikz
b~objnr
FROM afpo AS a
JOIN aufk AS b
ON aaufnr = baufnr
INTO TABLE gt_prd
FOR ALL ENTRIES IN gt_data
WHERE a~kdauf EQ gt_data-vbeln
AND a~kdpos EQ gt_data-posnr.
ENDIF.
*Get partner data
IF NOT gt_data[] IS INITIAL.
SELECT vbeln posnr parvw kunnr
FROM vbpa
INTO TABLE gt_partner
FOR ALL ENTRIES IN gt_data
WHERE vbeln EQ gt_data-vbeln.
ENDIF.
*Get Purchase Order
IF NOT gt_data[] IS INITIAL.
SELECT ebeln ebelp vbeln vbelp
FROM ekkn
INTO TABLE gt_po
FOR ALL ENTRIES IN gt_data
WHERE vbeln EQ gt_data-vbeln
AND vbelp EQ gt_data-posnr.
SELECT vbeln posnr banfn
FROM vbep
INTO TABLE gt_preq
FOR ALL ENTRIES IN gt_data
WHERE vbeln EQ gt_data-vbeln
AND posnr EQ gt_data-posnr.
ENDIF.
IF NOT gt_po[] IS INITIAL.
SELECT aebeln aprocstat a~lifnr
FROM ekko AS a
JOIN ekpo AS b
ON aebeln = bebeln
INTO TABLE gt_po_stat
FOR ALL ENTRIES IN gt_po
WHERE b~ebeln EQ gt_po-ebeln
AND b~ebelp EQ gt_po-ebelp.
ENDIF.
*Move data to output table
LOOP AT gt_data INTO wa_data.
wa_output-vbeln = wa_data-vbeln.
wa_output-posnr = wa_data-posnr.
wa_output-pstyv = wa_data-pstyv.
wa_output-matnr = wa_data-matnr.
READ TABLE gt_po INTO wa_po WITH KEY vbeln = wa_data-vbeln
vbelp = wa_data-posnr.
IF sy-subrc EQ 0.
wa_output-bstnk = wa_po-ebeln.
READ TABLE gt_po_stat INTO wa_po_stat WITH KEY ebeln = wa_po-ebeln.
IF sy-subrc EQ 0.
wa_output-lifnr = wa_po_stat-lifnr.
CASE wa_po_stat-procstat.
WHEN '01'.
wa_output-po_st = 'Version in process'.
WHEN '02'.
wa_output-po_st = 'Active'.
WHEN '03'.
wa_output-po_st = 'In release'.
WHEN '04'.
wa_output-po_st = 'Partially released'.
WHEN '05'.
wa_output-po_st = 'Released Completely'.
WHEN '08'.
wa_output-po_st = 'Rejected'.
ENDCASE.
ENDIF. "inner read subrc
ENDIF. "outer read subrc
READ TABLE gt_preq INTO wa_preq WITH KEY vbeln = wa_data-vbeln
posnr = wa_data-posnr.
IF sy-subrc EQ 0.
wa_output-banfn = wa_preq-banfn.
ENDIF.
READ TABLE gt_prd INTO wa_prd WITH KEY kdauf = wa_data-vbeln
kdpos = wa_data-posnr.
IF sy-subrc EQ 0.
wa_output-aufnr = wa_prd-aufnr.
*get the purchase requisition for production order as well
SELECT SINGLE banfn
FROM ebkn
INTO wa_output-banfn
WHERE aufnr EQ wa_prd-aufnr.
*Get the status of the production order
PERFORM fr_get_prd_stat USING wa_prd-objnr
CHANGING wa_output-prd_stat.
ENDIF. " sy-subrc
READ TABLE gt_partner INTO wa_partner WITH KEY vbeln = wa_data-vbeln
parvw = c_we.
IF sy-subrc EQ 0.
wa_output-sh = wa_partner-kunnr.
ENDIF.
READ TABLE gt_partner INTO wa_partner WITH KEY vbeln = wa_data-vbeln
parvw = c_ag.
IF sy-subrc EQ 0.
wa_output-sp = wa_partner-kunnr.
ENDIF.
APPEND wa_output TO gt_output.
CLEAR: wa_data, wa_prd,wa_partner,wa_output.
ENDLOOP.
ENDFORM. " fr_get_data
*& Form fr_build_range
text
--> p1 text
<-- p2 text
FORM fr_build_range .
*Range for partner function
MOVE 'I' TO ra_parvw-sign.
MOVE 'EQ' TO ra_parvw-option.
MOVE 'SH' TO ra_parvw-low. " we
APPEND ra_parvw.
CLEAR ra_parvw.
MOVE 'I' TO ra_parvw-sign.
MOVE 'EQ' TO ra_parvw-option.
MOVE 'SP' TO ra_parvw-low. " ag
APPEND ra_parvw.
CLEAR ra_parvw.
*Range for ship-to and sold-to
MOVE 'I' TO ra_kunnr-sign.
MOVE 'EQ' TO ra_kunnr-option.
MOVE p_kunnr TO ra_kunnr-low.
APPEND ra_kunnr.
CLEAR ra_kunnr.
MOVE 'I' TO ra_kunnr-sign.
MOVE 'EQ' TO ra_kunnr-option.
MOVE p_kunwe TO ra_kunnr-low.
APPEND ra_kunnr.
CLEAR ra_kunnr.
ENDFORM. " fr_build_range
*& Form fr_build_fc
text
--> p1 text
<-- p2 text
FORM fr_build_fc .
sales order number
afield-fieldname = 'VBELN'.
afield-seltext_s = 'Sales #'.
afield-ref_tabname = 'VBAK'.
APPEND afield TO xfield. CLEAR afield.
sales ITEM number
afield-fieldname = 'POSNR'.
afield-seltext_s = 'Item #'.
afield-ref_tabname = 'VBAP'.
APPEND afield TO xfield. CLEAR afield.
Material Number
afield-fieldname = 'MATNR'.
afield-seltext_s = 'Material #'.
afield-ref_tabname = 'VBAP'.
afield-outputlen = 10.
APPEND afield TO xfield. CLEAR afield.
*Vendor Number
afield-fieldname = 'LIFNR'.
afield-seltext_s = 'Vendor Num.'.
afield-ref_tabname = 'EKKO'.
APPEND afield TO xfield. CLEAR afield.
ship-to-party
afield-fieldname = 'SH'.
afield-seltext_s = 'Ship-to'.
afield-ref_tabname = 'VBPA'.
APPEND afield TO xfield. CLEAR afield.
sold-to-party
afield-fieldname = 'SP'.
afield-seltext_s = 'Sold-to'.
afield-ref_tabname = 'VBPA'.
APPEND afield TO xfield. CLEAR afield.
*PO number
afield-fieldname = 'BSTNK'.
afield-seltext_s = 'PO NUM'.
afield-ref_tabname = 'EKKO'.
APPEND afield TO xfield. CLEAR afield.
*PO status
afield-fieldname = 'PO_STAT'.
afield-seltext_s = 'Step'.
afield-ref_tabname = 'zbacklog_v2'.
APPEND afield TO xfield. CLEAR afield.
*PO step status
afield-fieldname = 'PO_ST'.
afield-seltext_s = 'PO.Status'.
afield-ref_tabname = 'zbacklog_v2'.
APPEND afield TO xfield. CLEAR afield.
*Purchase requisition
afield-fieldname = 'BANFN'.
afield-seltext_s = 'Pur. Req.'.
afield-ref_tabname = 'VBEP'.
APPEND afield TO xfield. CLEAR afield.
*Item catagory
afield-fieldname = 'PSTYV'.
afield-seltext_s = 'Itm. Catg'.
afield-ref_tabname = 'VBAP'.
APPEND afield TO xfield. CLEAR afield.
*Prodcution Order number
afield-fieldname = 'AUFNR'.
afield-seltext_m = 'Prod.Order'.
afield-ref_tabname = 'AFKO'.
APPEND afield TO xfield. CLEAR afield.
*PRODCUTION status
afield-fieldname = 'PRD_STAT'.
afield-seltext_s = 'Prd. Step'.
afield-ref_tabname = 'zbacklog_v2'.
afield-outputlen = 20.
APPEND afield TO xfield. CLEAR afield.
*PRODUCTION step status
afield-fieldname = 'PRD_ST'.
afield-seltext_s = 'Prd. Status'.
afield-ref_tabname = 'zbacklog_v2'.
APPEND afield TO xfield. CLEAR afield.
ENDFORM. " fr_build_fc
*& Form fr_output
text
--> p1 text
<-- p2 text
FORM fr_output .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_STRUCTURE_NAME =
IS_LAYOUT =
it_fieldcat = xfield[]
i_default = 'X'
i_save = 'A'
TABLES
t_outtab = gt_output
EXCEPTIONS
program_error = 1
OTHERS = 2.
ENDFORM. " fr_output
*& Form fr_get_prd_stat
text
-->P_WA_PRD_OBJNR text
FORM fr_get_prd_stat USING p_objnr CHANGING p_prd_stat.
DATA: lt_status TYPE STANDARD TABLE OF jstat,
wa_status TYPE jstat,
lv_status TYPE tj02t-txt04,
lv_temp2 TYPE char5,
lv_buff TYPE string.
CALL FUNCTION 'STATUS_READ'
EXPORTING
client = sy-mandt
objnr = p_objnr
only_active = 'X'
TABLES
status = lt_status
EXCEPTIONS
object_not_found = 1
OTHERS = 2.
LOOP AT lt_status INTO wa_status.
IF wa_status-stat(1) EQ 'I'.
SELECT txt04 FROM tj02t
INTO lv_status
WHERE istat EQ wa_status-stat
AND spras EQ 'E'.
ENDSELECT.
lv_temp2 = lv_status.
CONCATENATE lv_temp2 p_prd_stat INTO p_prd_stat
SEPARATED BY ','.
ENDIF.
CLEAR: wa_status, lv_status, lv_temp2.
ENDLOOP.
lv_buff = p_prd_stat.
*Status of Production Order
IF lv_buff CS 'CRTD'.
p_prd_stat = 'Not Active'.
ENDIF.
IF lv_buff CS 'REL'.
IF lv_buff CS 'GMPS'.
p_prd_stat = 'Printed In Prod'.
ELSE.
p_prd_stat = 'Printed'.
ENDIF.
ENDIF.
IF lv_buff CS 'TECO'.
p_prd_stat = 'Technically Compt.'.
ENDIF.
ENDFORM. " fr_get_prd_stat
>

Custom pagination for APEX 4.2 interactive report using Page Zero

Hi,
I want to implement an «Custom pagination for APEX 4.2 interactive report» using a «page zero».
I recently migrate from Apex 3.1 to Apex 4.2 and my «Custom pagination for APEX 3.1 interactive report» using a «page zero» is not working any more.
So now I try to adapt an excellent example of Jari Laine for 4.0 but using a page zero.
I put the code JavaScript to Page zero but I must create an dynamic action to fire only for an interactive report region.
It’s a good idea?
Thank you

Thought I would try once more with my DatePicker question.
On the Apex.Oracle.Com website I have created a 1 page application that has an Interactive Report.
[url http://apex.oracle.com/pls/apex/f?p=15655:1]
user = 'test'
password = 'test'
I have 2 questions :
(1) In IE7, press 'Actions', 'Filter'. On the Column dropdown list, select 'Order Timestamp'.
Notice the prompt icon to the right of the 'expression'. This should change to the Datepicker, but in IE7 it does not. Try the samething in Firefox or Chrome and the Datepicker will appear.
Is this a BUG, or does Apex 4.02 not support IE7 ?
(2) In Firefox or Chrome, where you can now see the Datepicker, you will notice that it is the new style picker, not the old style ( called 'classic' ). I want to change it so that it shows the 'classic' datepicker not the new, but cannot see how to do it, if indeed you actually can.
I would really appreciate it if someone could take a look and let me know if I am going mad, or if we need to get all our users onto IE8. We have now gone live with Apex 4.02 and need to resolve these issues.
Thanks in advance.
Edited by: DooRon on 10-Mar-2011 05:13

Top n Analysis using correlated subquery

Please explain this query. It is doing top n analysis using correlated subquery. I need explaination of execution of this query.
Select distinct a.sal
From emp a
where 1=(select count ( distinct b.sal) from emp b
     where a.sal <=b.sal)
Thanks in advance

Try breaking the query down and rewriting it in order to follow the logic;
SQL> --
SQL> -- Start by getting each salary from emp along with a count of all salaries in emp
SQL> --
SQL> select   a.sal,
        (select count (distinct b.sal) from scott.emp b ) count_sal
from scott.emp a
order by 1 desc
       SAL COUNT_SAL
      5000         12
      3000         12
      3000         12
      2975         12
      2850         12
      2450         12
      1600         12
      1500         12
      1300         12
      1250         12
      1250         12
      1100         12
       950         12
       800         12
14 rows selected.
SQL> --
SQL> --Add a condition to the count for only salaries below or equal to the current salarySQL> --
SQL> select   a.sal,
        (select count (distinct b.sal) from scott.emp b where a.sal <=b.sal) rank_sal
from scott.emp a
order by 1 desc
       SAL   RANK_SAL
      5000          1
      3000          2
      3000          2
      2975          3
      2850          4
      2450          5
      1600          6
      1500          7
      1300          8
      1250          9
      1250          9
      1100         10
       950         11
       800         12
14 rows selected.
SQL> --
SQL> -- Add a condition to only pick the nth highest salary
SQL> --
SQL> select    a.sal,
         (select count (distinct b.sal) from scott.emp b where a.sal <=b.sal) rank_sal
from scott.emp a
where (select count (distinct b.sal) from scott.emp b where a.sal <=b.sal) = 4
       SAL   RANK_SAL
      2850          4
1 row selected.Hope this helps.

Can I use a non apple wireless hard drive with time machine?

Can I use a non apple wireless hard drive with time Machine?

Some NAS (network storage) systems do claim to support Time Machine, with varying levels of success. For example, the Synology units have this feature. They're not officially supported by Apple, though.
Matt

Can Jdeveloper Be Used For Non-Oracle Databases

I have been trying to evaluate Jdeveloper 9i and Jbuilder 7 Enterprise for Swing database development. I am particularly interested in the productivity enhancements such as BC4J and Jclient. The underlying database might be Oracle, SapDb (excellent, easy to use, and free), SQLServer, etc.
I evaluated Jbuilder Enterprise tools and it worked flawlessly with SapDb. This emphasized using their DataExpress and DbSwing components which provide many useful capabilities similar to BC4j and Jclient. It also involved using their DBPilot tool which allows browsing similar to that provided via a Jdeveloper connection.
I tried to use Jdeveloper for the same SapDB and it is essentially non-functional. I followed the instructions for using a non-default driver and tried to define a connection. It behaved inconsistently: often saying no suitable driver can be found and yet when you edit the connection and test without making any changes, it works. If you try to establish a BC4J definition, it is very inconsistent and fails to recognize important details as foreign keys. Even if you define a ViewLink manually, it still does not work properly if you attempt to define a Master-Detail Jclient form. As I have stated, all these types of capabilities worked flawlessly in their Jbuilder equivalent. Furthermore, I really like the fact that Jbuilder gives many of BC4Js benefits without needing a BC4J J2EE container.
Has anyone had real success using Jdeveloper's advanced features to develop for non-Oracle databases and if so, how did you get around these types of problems?

Hi,
generally, SCAN can be used for 10g databases and you discovered the first half: for 10g databases you will have to modify the REMOTE_LISTENER entry for each 10g database instance to point to the SCAN listeners (as opposed to pointing to the remote local listeners, which is the default in 10g). You could even have the databases registers themselves with SCAN and the remote listeners, if you wanted to... It's more or less a matter of configuration. But for simplification reasons, I will stick to the case where you have your 10g databases register with the SCAN listeners only.
Now the other half is the client and the client configuration. An 11g Rel. 2 client configured for RAC would have a TNSNAMES entry that has only one address line for the RAC databases. The host entry in this one address line should point to the SCAN (the SCAN name is ideally resolved in DNS). A 10g client configured for RAC would have as many address lines in the TNSNAMES as you have nodes in the cluster.
The 10g client SCAN configuration would then be in the middle so to speak: You would have 3 address lines in your TNSNAMES, in which each host entry would resolve to one SCAN address (I assume you will use the recommended default of 3 SCAN IPs). If you choose, you can have a name resolution for each of your SCAN IPs, but this would not be required. Now, why would you do it this way? Because this configuration will always work and does not make you dependent on certain functionality that your DNS server may or may not offer.
For the remaining questions: SCAN is a DNS entry resolving one name to more than one (typically 3) IP addresses. OID is short for Oracle Internet Directory, which is a complete LDAP server. And you are right that there is no document how to configure 10g clients for SCAN from Oracle yet. However, there is a quite good document on SCAN on otn.oracle.com/rac, but I am sure you are aware of it already.
Hope that helps. Thanks,
Markus

Can i use a non-apple keyboard with my imac?

can i use a non-apple keyboard with my imac?

Welcome to the Apple Support Communities
You can use the keyboard you want with your iMac. However, note that some keys, as the Command key, aren't present in non-Apple keyboards. For example, in a non-Apple keyboard, you have to press the Windows key because that's the replacement of the Command key of an Apple keyboard

Interactive Analysis using a non-BO WebService

Similar Messages

Maybe you are looking for