IOS 6, drop the pin in the maps to your known locations and get the incorrect postal code. Thumbs up if I am right. :)

The maps gives me wrong information for the postal code all the time.
Please make sure the postal code twice before you use it for any legal purposes.

Could you be a little more specific? I took that section out of my CSS file but the problem persists.
Thank you.
Sincerely,
Michael Yannetta
Mio Web Designs
530-414-3313
[email protected]

Similar Messages

Maps shows incorrect postal code

The maps app shows an incorrect postal code for my address. It is showing the one for the block next to my house - maybe it's because I live on a corner lot. Is there any way this can be fixed? Google maps shows the correct postal code.

Yes, Google maps shows the correct postal code.
I am trying to use "remind me at a location" in the "Reminders" app. I have two choices for my home location: one with my correct street address and incorrect postal code, and one with another address in the neighbourhood that uses the same postal code (which is correct for that street address). I don't think there should be two addresses, but, nevertheless, I choose the one that has my street address and incorrect postal code. The reminder does not alert me.
I have contaced the map developers through "report a problem" in the app, but they must get many reports, so who knows how long it will take to correct the problem if they can even do it!

Clearing the the street,Postal code and city in partner tab at sales order

Hi Experts,
I have a requirement like in sales order header or Item, In partners tab, when they are selecting the particular partner function like CR and the customer number is 500, and if they press enter then automaticaly it fetches the name,street,postal code and city at the right side for that entry. My requirement is like for particular customer 700, they want to hide the customer address in that Partner tab while sales order creation VA01. If they select the partner function CR and customer 700, after pressing enter, it shouldn't fetch the automatic address of that customer. They just want the customer name and remaining fields like street,postal code,city should be blank.
Can you please let me know how to reach this requirement ate sales order creation or change level in partner function tab.
I test these exits EXIT_SAPLV09A_001 to EXIT_SAPLV09A_004 but no use. Let me know possible ways to achieve this?
Any idea on these?
Thanks in advance ,
Edited by: dolly B on Jan 18, 2010 11:36 AM

Hi,
This is happening because you have not maintained your data in sales order.
Billing document takes the reference of order and delivery document for taking the data.
Now if you donu2019t maintain your partner function in order nor in delivery then it wont be determine in billing document.
If you want ZZ to shown in billing document then you have to make that function visible in sales order.
While creating sales order it will take it from customer master data but when you are creating billing it wont search in customer master data it will search in sales order only.
You can do one thing make that function non modifiable in partner determination procedure.
So it cant be change in sales order.
But I want to know why you want that should not be visible in sales order.
Hope so I will be correct with my explanation.
Regards
Raj.

HT1212 who can a customer contact if they enter the incorrect pass code with this ios7 to have their phone reset?

I have a business customer that i am trying to assist that has a corporate passcode that he uses. And of coarse he was driving while typing in his code. And now he cann't get the code to go through. Hooked the phone to an itunes and it will not progress with out the passcode what can we do?

You'll need to restore the device, preferably from the computer to which the device is synced. For information and instructions, see:
http://support.apple.com/kb/ht1212
If that will not work, you'll need to put the device into Recovery Mode and then try the Restore again:
http://support.apple.com/kb/ht1808
If that still doesn't work, as a last resort try DFU mode:
http://www.iclarified.com/entry/index.php?enid=1034
If the device is running iOS 7 and your user set up Find My iPhone, however, then it has the Activation Lock on it and you'll need to enter in the user's Apple ID and password after erasing to be able to restore the device:
http://support.apple.com/kb/HT5818
Regards.

Whar do you do if you go to the app storee on your iphone 5c and get nothing but a blank screen?

What does one do if you go to the app store on an iphone 5c and all you get is a blank
screen?

Hi hs from sc,
Thanks for visiting Apple Support Communities.
You may find the steps in this article helpful if you only see a blank screen when you visit the iTunes Store or App Store:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Regards,
Jeremy

Why when I change my debit card banking details and the postal code of where I stay is rejected,yet I know it is the correct postal code?please HELP me.

Why is it that when I'm changing my debit card details and my postal address I receive a message that says my postal code is not valid?and yet I'm certain of what my postal code is.Please help.Regards,

Ztshosane wrote:
... I receive a message that says my postal code is not valid?...
Try here > http://support.apple.com/kb/TS1646
If necessary... Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

How do I connect TC to a new ethernet and share a new ethernet DSL with a new PC and use with my macbook Pro? I tried and get no internet on the PC or Macbook Pro?

how do I connect TC to a new ethernet and share a new ethernet DSL with a new PC and use with my macbook Pro? I tried and get no internet on the PC or Macbook Pro?

Ok.
I am connected to wi-fi through TC connected to a specific router and is working perfectly and saving data through TM without any issues.
The TC version is 7.6.1 and am using OS 10.7.3
The router mode is on Bridge mode and router is connected to TC through USB cable, I suppose for internet access. My Mac is on wi-fi through TC
I have another location, much further, which recently have been installed with wi-fi through router that has WPA accessibiulity with password, 100% different than the current one.
Since, I will be most of my time in this new location, I wish to move my TC to this new location, and configure it in similar fashion like what I am having right now.
Naturally, I do not wish to lose any saved data on the TC.
Hope I managed to provide enought info.
Thanks in advance

I Can't make the Geocoder handle Canadian Postal Code properly

Hi !
Does any one out there was able to approprietly setup Oracle Geocoder to properly return canadian postal code for a specific address in a dense urban area ?
In Canada, a single street segment can have two different post codes when located in dense urban areas such as Montreal. One on the left and one the right... so one for odds number and one for even numbers.
I don't see how to acheive this in the actual Oracle Geocoder table structure.
I see two solutions to my problem. In order to appropriatly return a canadian post code for a specific address, Oracle would need to
(1) have the GC_ROAD_SEGMENT_CA table have a L_POSTAL_CODE AND A R_POSTAL_CODE field. Thus returning the good postal code knowing if the house_number is odd or even.
OR
(2) have the GC_ADDRESS_POINT table have a POSTAL_CODE field allowing to directly return the postal code associated with an address.
Any help would be greatly appreciated !!
JB

Hello,
subscriber := sys.aq$_agent('sender', '[email protected]', NULL);
should be
subscriber := sys.aq$_agent('reciver', '[email protected]', NULL);
With your enqueue code the message is being made available for any default subscribers. As it stands the message will be propagated to the target queue and made available for the consumer sender.
So if you change your dequeue code to
dequeue_options.consumer_name := 'SENDER';
it will consume the message that has been propagated.
Thanks
Peter

Check for the postal code of Belgium

Hi Expert,
I have a question with the postal code in the infotype 6.
Normally the Belgian postal code must be in 5 digits (4 chiffers and one letter).
But for some reasons, in my society we must use only the postal code on the 4digtis.
So I know that I must change the custo table V_T5B5C.
And check all the custo for this.
But I would like in the infotype 6, enter manually the name of the village.
Because In belgium, several villages want have the same postal code.
So I would like remove the check in the infotype 6 on the postal code. So I would like that the system don't return the name of the village related to the postal code.
Someone can help me on this subject ??
Thanks in advance,
Virginie

Sorry I'm not familiar with IDocs, but you could just update field ORT01 from the new client-specific field in the user-exit "after input" (ZXPADU02) if you want to keep ORT01 correct at all times.
To create a new field, just create (if not yet done) structure CI_P0006 in transaction SE11, give your field an ID (starting with Z) and a data type (probably the same as ORT01). This will then automatically appear in a new subscreen (of module pool ZP000600) if I remember correctly. Then, you can change your new subscreen if you like using the screen painter (transaction SE51)...

Read this if Maps v2 loads to 30% and then quits ....

The solution to this problem is to delete the mapping data stored on your memory card, and try loading Maps v2 again.
Once it has loaded completely once, you can then quit and load the mapping data that you need to the memory card without problem.
Hope this helps.
Message Edited by edwardquan on 01-Jun-2008 03:23 PM
Regards,
Edward

Hello there,
In my case it stops to load at 90% and then just quits.
I then started Jakka's Crash Monitor for analysis and found out: The reason is a Panic: 12,User. (on a E51 with 4GB card and about 1 GB used for Maps, no other programs running except the normal system standards, like phone, led, email-in, aso)
The funny thing: It worked fine until this afternoon at 3 pm. I reached my target quit the program and fine. At 5 pm (nothing installed or so in the meantime) i wanted to drive somewhere else and... f***.
So I ended up in buying a map.
Shall I always carry my my PC with me when on the road to clean up the cache to be able to continue to use it?
I need a tool not a toy.
And well... that PC Nokia Maps Loader can also not be considered as a serious piece of software, more kind of an alpha-state program.
It does not allow you to see what you already have installed neither can you remove any maps selectively.
Also there is no chance to edit or delete your own locations and and and.
I was thinking about to extend my 1 month trial to a real long-term subscription... but i will better invest the money in real maps (paper) as they will be always availiable and i will not be lost in the middle of nowhere just as maps will decide again to panic.
Nokia really has to make some improvements to become a serious competitor to R66 or Garmin. Not to mention real devices like TomToms.
Another story is the quality the routing...
For that i will start a seperate thread so now here just short:
on sunday i was standing in front of a locked gate of a unpaved road in northern hungary and 1 hour later i wanted to call the nearest Hummer-Dealer to buy one of their vehicles to continue on the road the system selected (set on FASTEST! not or shortest!) and in Northern Slovakia you will end up as food for the bears if you trust your navigation-system.
(Nokia: If you you read this and dont believe it... try to come to visit me... i will rescue you when you are stuck and lost - i promise!)
w.

I have an I phone 4. When I bought it the google maps app came pre installed. I am in the process of adding thousands of customers into my stock contacts app. Sometimes I want to drop a pin in an exact location on the property. I drop it, assign it to the

I have an I phone 4. When I bought it the google maps app came pre installed. I am in the process of adding thousands of customers into my stock contacts app. Sometimes I want to drop a pin in an exact location on the property. I drop it, assign it to the contact, leave the app, and then come back into the contacts app and click on the address. It then takes me into google maps where I constantly discover that the pin has moved. It often moves off the property of the addresss or building I dropped a pin on. I am trying to solve this. I want that pin to stay in the exact location that I dropped it. Can somebody please help?

Sorry. There's nothing anyone can do. The current version of the facebook app will not run on 4.2.1. The iPhone 3G won't run anything higher than 4.2.1. You're stuck.
Maybe it's time to buy yourself a new iPod Touch.

Why doesn't the map search locations and only drops pins?

I started a project in iPhoto and used the map to show various locations. It was easy to insert the locations as the map searched them for you. Now I only appear to be able to drop pins and label them. This is going to be very time consuming if I have to precisely search each location manually... Any suggestions?

How do you set the location of a phot if it has nort recorded the GPS co-ords ?
I cannot see a way to drop a pin !... Tx
This discussion is about photos on the map pages in a photo book. You can drop pins on the map of a book to mark a place, but that does not assign a location to a photo.
While viewing a map in a book, ctrl-click a place on the map and select "Drop Pin".
Adding location data to photos is not supported in Photos. I hope, the next update will add this necessary feature.
Send feedback with a feature request: Apple - Photos - Feedback
For the time being, you have to add GPS coordinates to the photos before importing them to Photos.
You could, for example, first import to iPhoto, add the locations, batch change the titles and captions, do all the things that are not yet supported in the new Photos, then export the photos from iPhoto and import them to Photos.
Or use the free exiftool, if you like the Terminal.
See: http://www.sno.phy.queensu.ca/~phil/exiftool/exiftool_pod.html#geotagging_exampl es
To install exiftool: http://www.sno.phy.queensu.ca/%7Ephil/exiftool/install.html
Other convenient apps are Jetphoto Studio, Geotagalog, houdahGeo, there are many more ..
I use Jetphoto Studio, but it is not free.
If you updated iPhpto to version 9.6.1 before the update, you can still use iPhoto.
Just drag it back to the Dock from the Applications folder.
If you not yet have 9.6.1, update as described here:
Get iPhoto 9.6.1 if you didn't update before OS... | Apple Support Communities
The main idea is to move the iPhoto app to the Trash, so Spotlight does not see it as installed, reload the AppStore, and then to try to download again from the App Store - from your Purchases tab, not from the main page, since you can neither buy iPhoto nor update it, but you can reinstall, if your AppleID is associated with it.

I want to place a map pin in ios6. I place the pin in a rural area without an address. I add it to a nem in my contact book and the pin move 40 miles to a different location. Can I have a drop pin without an address?

I want to place a map pin in ios6. I place the pin in a rural area without a street address. I added it to a name in my contact book which does not have an address entry and the pin moved 40 miles to a different location. Not even the same zip code. Can I have a drop pin without an address? That way if I select a Contact entry it will still come up on the map in the right location.
thank you

Hi I suggest you contact the forum mods they should be able to get your problem sorted for you this is a link to them
http://bt.custhelp.com/app/contact_email/c/4951
they normally reply by email or phone directly to you within 3 working days
They are a UK based BT specialist team who have a good record at getting problems solved
This is a customer to customer self help forum the only BT presence here are the forum moderators
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Apple Maps - Please reconsider and include Google Maps. As a long time Apple customer, I am disappointed iOS would regress the system and inconvenience millions because of a vendetta that should never hinder users. Not only does the transit feature I used

Apple Maps - Please reconsider and include Google Maps. As a long time Apple customer, I am disappointed iOS would regress the system and inconvenience millions because of a vendetta that should never hinder users. Not only does the transit feature I used religiously no longer exist, but clicking on an address in a website now directs users to a poor Google Maps interface. I am surprised to see such a effortless update from a company squatting on the resources to make a change its customers are asking for.

varjak paw wrote:
Apple has documented an API to provide add-ons to the Maps app in the iOS 6 SDK, so that such add-ons are possible is absolutely not a guess that the capability is there. As to whether someone will indeed develop an add-on for any given transit system, that would be a guess, yes, but at a couple of companies at least have already announced plans to do so.
In select cities and areas - so now I'm going from being able to supply this information myself to either wait for someone to supply an app or write an app myself... This is not feature progression but feature regression. Adding transit times or a specific overlay should not have to be something you need to do through code via an API. So no dice... Your guess that we will see better transit information is just that - a guess, nothing else.
If you don't agree with that editorial, you are certainly free to do so. I provided the link as food for thought for those who have been questioning Apples' decision to drop Google's maps from iOS. Whether or not you agree with Brad's analysis or that of anyone else is up to you.
But on that central issue the editorial fails - it's is not the true tale of why Apple made their move and therefore useless even as "food for thought" (because it's guesswork).

I have just purchased a lightning to 30 pin adaptor to use on an iPad mini and a gen5 iPod touch both devices are running iOS 8.1.3 and come up with The error message "this accessory is not supported by this device "

I have just purchased a lightning to 30 pin adaptor to use on an iPad mini and a gen5 iPod touch both devices are running iOS 8.1.3 and come up with The error message "this accessory is not supported by this device "
THis is means they are not charging on a 30 pin cable and the touch won't work in my Apple iPod dock - no audio out or charge. Have re powered both devices to no avail am wondering if the iOS version is the problem
Help!

If it is a lightning to 30 pin adaptor, and you have a 7th Generation Nano it has to fit the Nano.
This is lightning to 30 pin adapter: http://www.bestbuy.com/site/Apple%26%23174%3B---Lightning-to-30-Pin-Adapter/6651 936.p?id=1218803450821&skuId=6651936#tab=overview
Is this what you bought?
You need to contact Sony and see if they model you have is compatible with the docking adapter. It may not be.

IOS 6, drop the pin in the maps to your known locations and get the incorrect postal code. Thumbs up if I am right. :)

Similar Messages

Maybe you are looking for