Is there a recommended limit on the number of custom sections and the cells per table so that there are no performance issues with the UI?

Thanks Kelly,
The answers would be the following:
1200 cells per custom section (NEW COUNT), and up to 30 custom sections per spec.
Assuming all will be populated, and this would apply to all final material specs in the system which could be ~25% of all material specs.
The cells will be numeric, free text, drop downs, and some calculated numeric.
Are we reaching the limits for UI performance?
Thanks

Similar Messages

I had recently purchased a iphone 5s in Oman and had to move to India.I am facing some hardware issues with the earphone slot. When i plug in the earphone there is lot of disturbance heard. Can i get it repaired in India under international warranty?

I had recently purchased a iphone 5s with OS version 7.1.2 in Oman and had to move to India.I am facing some hardware issues with the earphone slot. When i plug in the earphone there is lot of disturbance heard. Can i get it repaired in India under international warranty?

No. The iPhone warranty is not international. You will need to have warranty service done in Oman.

Performance issue with the Select query

Hi,
I have an issue with the performance with a seclet query.
In table AFRU - AUFNR is not a key field.
So i had selected the low and high values into s_reuck and used it in Where condition.
Still i have an issue with the Performance.
SELECT SINGLE RUECK
RMZHL
IEDD
AUFNR
STOKZ
STZHL
FROM AFRU INTO table t_AFRU
FOR ALL ENTRIES IN T_ZSCPRT100
WHERE RUECK IN S_RUECK AND
AUFNR = T_ZSCPRT100-AUFNR AND
STOKZ = SPACE AND
STZHL = 0.
I had also cheked by createing an index for AUFNR in the table AFRU...it does not help.
Is there anyway that we can declare Key field while declaring the Internal table....?
ANy suggestions to fix the performance issue is apprecaited!
Regards,
Kittu

Hi,
Thank you for your quick response!
Rui dantas, i have lill confusion...this is my code below :
data : t_zscprt type standard table of ty_zscprt,
       wa_zscprt type ty_zscprt.
types : BEGIN OF ty_zscprt100,
        aufnr type zscprt100-aufnr,
        posnr type zscprt100-posnr,
        ezclose type zscprt100-ezclose,
        serialnr type zscprt100-serialnr,
        lgort type zscprt100-lgort,
      END OF ty_zscprt100.
data : t_zscprt100 type standard table of ty_zscprt100,
       wa_zscprt100 type ty_zscprt100.
Types: begin of ty_afru,
            rueck type CO_RUECK,
            rmzhl type CO_RMZHL,
            iedd type RU_IEDD,
            aufnr type AUFNR,
            stokz type CO_STOKZ,
            stzhl type CO_STZHL,
         end of ty_afru.
data : t_afru type STANDARD TABLE OF ty_afru,
        WA_AFRU TYPE TY_AFRU.
SELECT AUFNR
        POSNR
        EZCLOSE
        SERIALNR
        LGORT
        FROM ZSCPRT100 INTO TABLE T_ZSCPRT100
        FOR ALL ENTRIES IN T_ZSCPRT
        WHERE   AUFNR = T_ZSCPRT-PRTNUM
        AND   SERIALNR IN S_SERIAL
        AND    LGORT   IN S_LGORT.
    IF sy-subrc <> 0.
       MESSAGE ID 'Z2' TYPE 'I' NUMBER '41'. "BDCG87
       stop."BDCG87
    ENDIF.
ENDIF.
SELECT    RUECK
              RMZHL
              IEDD
              AUFNR
              STOKZ
              STZHL
              FROM AFRU INTO TABLE T_AFRU
              FOR ALL ENTRIES IN T_ZSCPRT100
              WHERE RUECK IN S_RUECK     AND
                    AUFNR = T_ZSCPRT100-AUFNR AND
                    STOKZ = SPACE AND
                    STZHL = 0.
Using AUFNR, get AUFPL from AFKO
Using AUFPL, get RUECK from AFVC
Using RUEKC, read AFRU
In other words, one select joining AFKO <-> AFVC <-> AFRU should get what you want.
This is my select query, would you want me to write another select query to meet this criteria..
From AUFNR> I will get AUFPL from AFKO> BAsed on AUFPL I will get RUECK, based on RUEKC i need to read AFRU..but i need to select few field from AFRu based on AUFNR....
ANy suggestions wil be appreciated!
Regards
Kittu

Performance issues with the Tuxedo MQ Adapter

We are experimenting some performance issues with the MQ Adapter. For example, we are seeing that the MQ Adapter takes from 10 to 100 ms in reading a single message from the queue and sending to the Tuxedo service. The Tuxedo service takes 80 ms in its execution so there is a considerable waste of time in the MQ adapter that we cannot explain.
Also, we have looked a lot of rollback transactions on the MQ adapter, for example we got 980 rollback transactions for 15736 transactions sent and only the MQ adapter is involved in the rollback. However, the operations are executed properly. The error we got is
135027.122.hqtux101!MQI_QMTESX01.7636.1.0: gtrid x0 x4ec1491f x25b59: LIBTUX_CAT:376: ERROR: tpabort: xa_rollback returned XA_RBROLLBACK.
I am looking for information at Oracle site, but I have not found nothing. Could you or someone from your team help me?

Hi Todd,
We have 6 MQI adapters reading from 5 different queues, but in this case we are writing in only one queue.
Someone from Oracle told us that the XA_RBROLLBACK occurs because we have 6 MQ adapters that are reading from the same queues and when one adapter finds a message and try to get that message, it can occurs that other MQ Adapter gets it before. In this case, the MQ adapter rollbacks the transaction. Even when we got some XA_RBROLLBACK errors, we don´t lose message. Also, I read something about that when XA sends a xa_end call to MQ adapter, it actually does the rollback, so when the MQ adapter receives the xa_rollback call, it answers with XA_RBROLLBACK. Is that true?
However, I am more worried about the performance. We are putting a request message in a MQ queue and waiting for the reply. In some cases, it takes 150ms and in other cases it takes much more longer (more than 400ms). The average is 300ms. MQ adapter calls a service (txgralms0) which lasts 110ms in average.
This is our configuration:
"MQI_QMTESX01" SRVGRP="g03000" SRVID=3000
CLOPT="-- -C /tuxedo/qt/txqgral00/control/src/MQI_QMTESX01.cfg"
RQPERM=0600 REPLYQ=N RPPERM=0600 MIN=6 MAX=6 CONV=N
SYSTEM_ACCESS=FASTPATH
MAXGEN=1 GRACE=86400 RESTART=N
MINDISPATCHTHREADS=0 MAXDISPATCHTHREADS=1 THREADSTACKSIZE=0
SICACHEENTRIESMAX="500"
/tuxedo/qt/txqgral00/control/src/MQI_QMTESX01.cfg:
*SERVER
MINMSGLEVEL=0
MAXMSGLEVEL=0
DEFMAXMSGLEN=4096
TPESVCFAILDATA=Y
*QUEUE_MANAGER
LQMID=QMTESX01
NAME=QMTESX01
*SERVICE
NAME=txgralms0
FORMAT=MQSTR
TRAN=N
*QUEUE
LQMID=QMTESX01
MQNAME=QAT.Q.NACAR.TO.TUX.KGCRQ01
*QUEUE
LQMID=QMTESX01
MQNAME=QAT.Q.NACAR.TO.TUX.KGCPQ01
*QUEUE
LQMID=QMTESX01
MQNAME=QAT.Q.NACAR.TO.TUX.KPSAQ01
*QUEUE
LQMID=QMTESX01
MQNAME=QAT.Q.NACAR.TO.TUX.KPINQ01
*QUEUE
LQMID=QMTESX01
MQNAME=QAT.Q.NACAR.TO.TUX.KDECQ01
Thanks in advance,
Marling

Performance issues with the Vouchers index build in SES

Hi All,
We are currently performing an upgrade for: PS FSCM 9.1 to PS FSCM 9.2.
As a part of the upgrade, Client wants Oracle SES to be deployed for some modules including, Purchasing, Payables (Vouchers)
We are facing severe performance issues with the Vouchers index build. (Volume of data = approx. 8.5 million rows of data)
The index creation process runs for over 5 days.
Can you please share any information or issues that you may have faced on your project and how they were addressed?

Check the following logs for errors:
1. The message log from the process scheduler
2. search_server1-diagnostic.log in /search_server1/logs directory
If the build is getting stuck while crawling then we typically have to increase the Java Heap size for the Weblogic instance for SES>

Performance issue with the ABAP statements

Hello,
Please can some help me with the below statements where I am getting performance problem.
SELECT * FROM /BIC/ASALHDR0100 into Table CHDATE.
SORT CHDATE by DOC_NUMBER.
SORT SOURCE_PACKAGE by DOC_NUMBER.
LOOP AT CHDATE INTO WA_CHDATE.
   READ TABLE SOURCE_PACKAGE INTO WA_CIDATE WITH KEY DOC_NUMBER =
   WA_CHDATE-DOC_NUMBER BINARY SEARCH.
   MOVE WA_CHDATE-CREATEDON to WA_CIDATE-CREATEDON.
APPEND WA_CIDATE to CIDATE.
ENDLOOP.
I wrote an above code for the follwing requirement.
1. I have 2 tables from where i am getting the data
2.I have common fields in both the table names CREATEDON date. In both the tables I hve the values.
3. While accessing the 2 table and copying to thrid table i have to modify the field.
I am getting performance issues with the above statements.
Than
Edited by: Rob Burbank on Jul 29, 2010 10:06 AM

Hello,
try a select like the following one instead of you code.
SELECT field field2 ...
INTO TABLE it_table
FROM table1 AS T1 INNER JOIN table2 AS T2
ON t1-doc_number = t2-doc_number

HT201274 i connected my iphone 5 to itunesbecause i reset all contacs settings and it dosent let me connect itsays we are unable to continue with the activation at this time

i connected my iphone 5 to itunesbecause i reset all contacs settings and it dosent let me connect itsays we are unable to continue with the activation at this time

Just have to give it some time. The activation and verification servers are all slammed right now 'cause of all the people trying to update at the same time. Give it a couple hours (or overnight if you can wait) and it should sort itself out.
= L.I.

How can I change the number in iMessage send and receive on my iPhone 5c that is gray?

I recently bought a iphone 5c and when I activate it, the imessage automatically set the number in send and receive, but the funny thing is the number that is registered is my number in another network and is grayed out, How can I change the number to the sim that I'm using in the phone?

HI,
As far as I can tell you cannot delete the ID when Only one is listed.
This would suggest that you have to add the second (Correct) one and then delete the first (wrong) one.
I can't say I have tried this yet.
10:43 PM Thursday; April 5, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

HT1212 Hello. I'm having a problem with my mini iPad. When I went to sign on yesterday the number pad moved up and now it is out of site. I can't sign on the only thing that shows is the Apple logo.

Hello. I'm having a problem signing onto my iPad mini. When I went to sign on yesterday the number pad to sign on moved upward and now it is out of site. Now I can't sign on the only thing that shows is the Apple logo.

Have you tried to give your iPad a reset? Hold down the sleep and home keys until you see the silver apple. Let it reboot and see if it helps.

Project server 2010 What are the number of Custom fields and views allowed?

How many customizations are permitted in Project Server 2010?
Thanks in advance

Hi
new findings on that issue...
There is an article for Project Online that speaks about limits for reporting: https://support.office.com/en-US/Article/Project-Online-software-boundaries-and-limits-5a09dbce-1e68-4a7b-b099-d5f1b21ba489?ui=en-US&rs=en-US&ad=US
Apart from that you will have an issue if you like to upgrade to Project Server 2013. When trying to convert the 2010 databases to a 2013 database a SQL stored procedure will fail if you have more custom fields than fit into the UserViews.
Error message will be something like this:
System.Data.SqlClient.SqlException (0x80131904): INIT METADATA ERROR! At least one mismatch found between SQL schema for view MSP_EpmProject_UserView and reporting metadata. Call to MSP_Epm_CheckIntrinsicAttributes failed for Projects INIT
METADATA ERROR.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.Office.Project.Server.Data.SqlSession.ExecuteNonQuery(SqlCommand command) ClientConnectionId:21f11abd-7388-48a0-a029-b5161fcb2dc8
Workaround for the issue (UNSUPPORTED !!!!!!)
Execute the Convertto-SPProjectDatabase script. Now you need to be fast or well prepared. You need to find the MSP_Epm_CheckIntrinsicAttributes stored procedure. Execute an ALTER statement for it and change the last lines of code to something like this:
LblError:
   PRINT @ErrorMessage
--changed RETURN code if an error occurs to be able to proceed with migration
--RETURN 1
   RETURN 0
END
I hope that helps someone out there - when I came across the issue last night, a google query returned nothing for INIT METADATA ERROR....
Regards
Christoph
Christoph Muelder | Senior Consultant, MCTS, MCSE | SOLVIN information management GmbH, Germany

TS1815 Why does the artwork go black? - i.e. just a black square that CANNOT be deleted or replaced with the correct artwork.

I am really fed up with LOSING my artwork - I have over 66,000 tracks ALL of which had artwork when I added them to my iTunes - I now regularly find missing artwork, or a black or white square which it is impossible to delete or replace. I have only seen this since Apple went over to the 'new' versionof iTunes. Apple do not listen to anyone - why is this?

Hi HumeDoom
I have tried all this stuff - I replace the artwork (tried both deleting/not deleting tte iblack/white artwork) initially all looks OK - then when I go back into the track - it is still black/white. NOTHING gets rid of the black/white square. The only way I would be able to do it is to delete the albums and start again. I don't feel I have enough tine to re-install 66,000 (plus) tracks - as I don't know which of the tracks have become corrupted until I play them. I wonder if there is some limit within the program that cannot cope with the amount of artwork I have and starts to corrupt itself?
I feel that Apple don't seem to want to address iTunes problems - it has only happened since they upgrded to the 'new' version.
As an Apple user for a long time I have bcome very disillusioned with them in the last couple of years.
I updated my Mac Pro 8-core with Mavericks - luckily I had backed up my 6.5TB of drives - so was able to go back when I found that I couldn't use a lot of my softeware.
Cheers
raywalker

While using the computer the wi fi dropped out and it can longer find any networks. I have played around with the air port etc , still have no networks and can't connect to internet. Please help

Hi I am having Wi fi connectivity issues , while using my computer the wi fi dropped out , I can no longer connect and no networks come up. I have tried looking into the air port, trying manually to connect to the desired network with no success , it says the Wi fi is turned on. I am at a loss to why it will no longer connect, please if you have any suggestions,as I tried to ring apple support but my warranty has expired this is my first major issue since I purchased it in 2009.
Thanks

My 4s i-phone which is 2 years old cannot find any wi-fi networks not even my home network... I had the same problem two months ago but i turned off the i-phone for 8 hours and then it was okay... Now it happened again.... I tried to restart the modem but whilst my laptop is connected regularly, my phone still cannot find any wi-fi networks... I restart the i-phone, i reset it, i chose reset network settings, reset all settings, i turned it off for a whole day in case it was overloaded, i turned on the airplane mode and turned it off again, i put it into the freezer for 10 minutes within a zipped bag but 3 days now and i still cannot be connected to my home wifi... I went to the technician today and he told me that it means that wi-fi is broken and that i need to change it with a charge of 70 euro but i have to give my phone for 10 working days so as to be fixed... I am so frustrated and i don't know if i want to give 70 euro for wifi since i don't know if it would make the same problems again...

Performance issue with the table use vrkpa

Hi.
here is the selection criteria that i am using and the table use vrkpa i only used to map the table kna1 and vbrk.vbrk and kna1 doesnot have the direct primary key relationship.
please check and let me know wht this vrkpa is taking time and how can i improve the performance as from kna1,i am fetching data very easily while fetching nothing from vrkpa and fetching fkdat from vbrk.
the idea behind using these tables is just for one kunnr (from kna1)getting the relevant entries based on the fkdat(selection screen input field),please suggest.
    SELECT kunnr
           name1
           land1
           regio
           ktokd
           FROM kna1
           INTO TABLE it_kna1
           FOR ALL ENTRIES IN it_knb1
           WHERE kunnr = it_knb1-kunnr
           AND ktokd = '0003'.
    IF sy-subrc = 0.
      SORT it_kna1 BY kunnr.
      DELETE ADJACENT DUPLICATES FROM it_kna1 COMPARING kunnr.
    ENDIF.
ENDIF.
IF NOT it_kna1[] IS INITIAL.
    SELECT kunnr
           vbeln
           FROM vrkpa
           INTO TABLE it_vrkpa
           FOR ALL ENTRIES IN it_kna1
           WHERE kunnr = it_kna1-kunnr.
    IF sy-subrc = 0.
      SORT it_vrkpa BY kunnr vbeln.
    ENDIF.
ENDIF.
IF NOT it_vrkpa[] IS INITIAL.
    SELECT vbeln
           kunrg
           fkdat
          kkber
           bukrs
           FROM vbrk
           INTO TABLE it_vbrk
           FOR ALL ENTRIES IN it_vrkpa
           WHERE vbeln = it_vrkpa-vbeln.
    IF sy-subrc = 0.
      DELETE it_vbrk WHERE fkdat NOT IN s_indate.
      DELETE it_vbrk WHERE fkdat NOT IN s_chdate.
      DELETE it_vbrk WHERE bukrs NOT IN s_ccode.
      SORT it_vbrk DESCENDING BY vbeln fkdat.
    ENDIF.
ENDIF.

Hi,
Transaction SE11
Table VRKPA => Display (not Change)
Click on "Indexes"
Click on "Create" (if your system is Basis 7.00, then click on the "Create" drop-down icon and choose "Create extension index")
Choose a name (up to 3 characterss, start with Z)
Enter a description for the index
Enter the field names of the index
Choose "Save" (prompts for transport request)
Choose "Activate"
If after "Activate' the status shows "Index exists in database system <...>", then you have nothing more to dotable is very large the activation will not create the index in the database and the status remains "Index does nor exist". In that case:
- Transaction SE14
- Table VRKPA -> Edit
- Choose "Indexes" and select your new index
- Choose "Create database index"; mark the option "Background"
- Wait until the job is finished and check in SE11 that the index now exists in the DB
You don't have to do anyhting to your program because Oracle should choose the new index automatically. Run a SQL Trace to make sure.
Rgds,
Mark

Performance issue with the FM FKK_CLEARING_PROPOSAL_GEN_0110.

Hi Experts,
I am passing some 60000 transactions to this FM FKK_CLEARING_PROPOSAL_GEN_0110 and it takes a lot of time to process.
Please let me know if there is any way / SAP notes to be implemented so that I can reduce the time consumed by this FM to process the same number of transactions.
Regards,
Karthik

Hi,
To determine the root cause you can use ST05 Performance Trace which can help to record database access, locking activities, and remote calls of reports and transactions in a trace file and display the performance log as a list.
Once you are done with this you can check if any modifications are required for poor code performance ( like PERFORM commit routine ON COMMIT), initilization of all internal tables again from which data was updated at the end of the commit routine - to prevent a duplicate update in the next call.
And then you can adjust this module in event 110 : Automatic Clearing Proposal using tcode FQEVENTS
or at Financial Accounting -> Contract Accounts Receivable and Payable -> Program Enhancements -> Define Customer-Specific Function Modules) for event 110.
You can also activate the following fields in table T_FKKCL for clearing amounts to be assigned
XAKTP 'X' (marked) Item will be used
XAKTS 'X' (marked) Specified cash discount will be used
AUGBW Assigned amount (gross)
ASKTW Assigned cash discount amount
SKTPA Accepted cash discount percentage (which is similar as SKTPZ)
Alternately check the clearing control rules at
Contract Accounts Receivable and Payable -> Basic Functions -> Open Item Management -> Clearing Control
by assigning a clearing variant to the clearing type of the clearing process you can make use of the clearing control to assign open items automatically by:
1. Selection of open items for clearing
2. Grouping of open items for joint clearing
3. Sorting of open items for the order of processing for individual item groups or items within the group
4. Split of payment amount according to different methods for partial clearing
Thanks,
Sagar

Performance Issue with the Query urgent

is there any way to get the data for the material Rejected with Movement type 122 & 123 except MSEG table, as my report is very slow...
my query is as below : -
SELECT SUM( a~dmbtr )INTO value1
    FROM mseg AS a INNER JOIN mkpf AS b
         ON amblnr = bmblnr
        AND amjahr = bmjahr
      WHERE a~lifnr = p_lifnr
        AND a~bwart IN ('122')
        AND b~budat IN s_budat
      GROUP BY lifnr.
ENDSELECT.
abhishek suppal

Hi Abhi,
Try like this ....
SELECT SUM( a~dmbtr )INTO value1
FROM mseg AS a INNER JOIN mkpf AS b
ON amblnr = bmblnr
AND amjahr = bmjahr
WHERE a~lifnr = p_lifnr
AND a~bwart IN ('122'<b>,'123'</b>)
AND b~budat IN s_budat
GROUP BY lifnr.
ENDSELECT.
or ...
define ranges...like
ranges: r_bwart for XXXX-bwart.
r_bwart-sign = 'I'.
r_bwart-option = 'EQ'.
r_bwart-low = 122.
append r_bwart.
r_bwart-low = 123.
append r_bwart.
now...
in select statement u just add
AND a~bwart IN r_bwart
Thanks
Eswar

Is there a recommended limit on the number of custom sections and the cells per table so that there are no performance issues with the UI?

Similar Messages

Maybe you are looking for