Issue on OSB business service configuration with email transport

Hi,
I am trying to create a Business Service with email Transport configuration. While creation, I have selected ServiceType as MessagingService.Then in Message Type Configuration page have selected Request Message Type as Text and Response Message Type as None. Now in Transport Configuration page email option is not showing in protocol.It's only showing http , jms option there.
While I tried the same in some other OSB installation environment I am able to find email option in Protocol.
Any idea what could be potential reason of it.How can I able to see email option in Protocol ?
Regards,
Subhra

Hi,
Please check the state of Email Transport Provider in the admin console it should be in the active state , and also Go to JMS Module --> jms resources and check dist_wlsb.internal.transport.task.queue.email_auto.
its heath and assosiated member will be working fine.
Regards
Bharat

Similar Messages

OSB Business Service Retries for Read Timeout

Hi,
Is it possible to have retries configurable for Read Time out in Business Services in OSB ?
What is the best practice alternative if we need to retry on a read time out with the same request ?

You can configure your business service to retry.On the transport configuration tab of the business service configure the following:-
Retry Count
Retry Iteration Interval
http://docs.oracle.com/cd/E14571_01/doc.1111/e15867/business_services.htm#i1096469

OSB Business Service is not timing out on Connection/Read timeout

I have a weird problem with my business service in OSB. I have set the read timeout value as 1 sec and Connection timeout value as 1 sec. The response from backend is taking more than 2 seconds or even 3 seconds but still my business service is not timing out..! My service is still listening to the response from backend even if it comes after 3 seconds. I expect it to timeout after 2 seconds. Any ideas?
Business Service Configurations:
Service Type: Any type
Protocol: http
Retry count : 0
Retry Application Errors: No
Read Timeout: 0
Connection Timeout: 0
HTTP Request Method: POST
Result Caching: No
Let me know if you need any more information. Thanks in Advance.
Regards
Kaleem

AbhishekJ wrote:
Maximum possible successful response time of the service will be less than Read TO + Connection TO.
Alas, this is not true.
Maximum possible response time is infinity.
There are two reasons for that.
1. Read timeout is not counted as time from the successful connection establishing to the current moment. It is measured as time from the last received byte to now. Imagine a backend service that sends a single byte in a data packet every 500ms. Despite you have read timeout set to 1, the receiving of 3K message will take 25 minutes, and yet your Biz service will not timeout.
2. In HTTPS, handshake is handled by a separate library which has its own quirks. Specifically, if the key exchange is broken at particular point of handshake, the library re-establishes the connection and does it few times; in my experiements, the largest I could delay the eventual fault was about 3 minutes.
Having said that, in the OP message the configuration is Read=0, Connect=0, so I wonder why the timeout is expected.

JSSE causes OSB business services to receive Socket Closed

Using WL 10.3.3 & OSB 11gR1 on jrockit 1.6.0_45 Redhat:
After enabling the "Use JSSE SSL" option in the managed servers's SSL tab ( because web service clients want to use SHA256 certificates ), OSB business services ( outbound to service providers ) fail with
Exception - Body: <s:Body xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
<soap-env:Fault xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/">
<faultcode>BEA-380000</faultcode>
<faultstring>General runtime error: socket closed</faultstring>
After a lot of debugging, I've found that the Connection Timeout option within the OSB HTTP transport is involved.
OSB business services which use https AND have a non-zero value for HTTP transport's Connection timeout cause the Socket Closed error.
Business services which do not use HTTPS or do not have a Connection Timeout do not receive the error.
While setting the Connection Timeout to 0 allows the transaction to succeed, that leaves the OSB server vulnerable when the service provider host is not available.
So I've reset the Connection Timeout values to 0, and added this JVM parameter to each OSB managed server
-Dweblogic.http.client.defaultConnectTimeout=5000

There are few BUGs reported for similar issues.
OSB Server Showing "java.io.IOException: SSLEngine is closed" When Attempting to Connect to an External Web Service Using Two-Way SSL (Doc ID 1465618.1)

OSB Business Service Work Manager Doesnt Throttle

Hi,
I have a requrirement to throlle the number of concurrent requests going to an end point.
So i have used OSB business service where in i am calling an end point webservice, and configured a work manager in console and selected it in the dispatch policy
I deployed the workmanager on managed server. i specified max concurrent threads as 3.
I tried to test it and see that throttling doesnt really work.. All the requests sent are being sent at once not 3 at a time.
The expected behavior is first 3 sdhud go and then onc ethey complete next 3 similary next 3. But i dont see that behavior. Please let me know if i am doing any worng
below is my work manager configuration
Service Type Any XML Service
Transport Configuration
Protocol http
Load Balancing Algorithm round-robin
Endpoint URI <Specified the end point URI>
Retry Count 0
Retry Iteration Interval 0
Retry Application Errors Yes
HTTP Transport Configuration
Read Timeout 0
Connection Timeout 0
HTTP Request Method POST
Authentication None
Proxy Server
Follow HTTP redirects Disabled
Use Chunked Streaming Mode Enabled
Dispatch Policy WorkManagerTest
Message Handling Configuration
XOP/MTOM Support Disabled
Page Attachments to Disk No
Result Caching Not Supported
Any suggestions on this?
Edited by: 791951 on Mar 17, 2011 7:51 AM

If you need to throttle the Business service, then you should configure the throttling parameters in the Business Service -> Operational Settings tab
Choose your Business Service in the OSB Console -> Operational Settings
Throttling -Check this box to enable the throttling. Maximum Concurrency to 3, and Throttling Queue to x number of messages you wish to hold in the throttling queue

OSB business service transforming a date column 1936 to 2036 ( 1950)

Hello, I'v a database view with a normal date column "geburtsdatum".
Data Dictionary:
GEBURTSDATUM DATE
Now with JDeveloper I create a db-adapter. This works fine.
On OSB I do generate a business service on the just created jca file. Also this works fine.
XSD for db adapter:
<xs:element name="geburtsdatum" type="xs:dateTime" minOccurs="0" nillable="true"/>
I can test this business service successfully, everything is fine, but not the date interpretation when birtdate <1950
Sample geburtsdatum (birtdate): 29-JUL-1934
DATABASE: 29.07.1934
OSB Business Service: 29.07.2034
Why or where happends this date conversion?
This is very strange, anyone had the same problem?
Any help would be appreciated.
Thanks
Best regards,
Reto

After all I found the solution. Again the problem has been caused on DB side.
I'm using a view. On this view I had a DATE column with a decode. I think I did a clean TO_DATE casting, but it seems as the OSB DB Adapter did not interpret this correctly.
(on database side with SQL I did not have any problems here)
My solution was:
Using a date returning function (which does my decoding) in my view :
CREATE VIEW xyz AS
SELECT ...
, myPackage.removeMaxDate(n.geburtsdatum) as geburtsdatum
FROM ...
Regards,
Reto

OSB business service and NTLM authentication

Hi,
Is there a solution to use OSB business service with http transport and this bs authenticates itself with NTLM
thanks Edwin

Hi Manoj,
We want to connect our production esb to the ERP ( IFS) system and we want to do this with the OSB. The ERP system has a lot http services and they are all running on jboss. On this app server they have enabled ntlm so users can their account to fill in there project hours /administration.
I got this working with a authenticator in a jdeveloper 11g web service proxy client. ( http://biemond.blogspot.com/2009/04/jax-ws-web-service-proxy-client-and.html )
thanks Edwin

Using UDDI key in OSB business service

Hi All,
I want to know how to invoke a service published in Oracle service registry through dynamic lookup in OSB. I tried importing service published in OSR as a OSB business service through sb console. In that the business created had the actual service end point reference rather than the UDDI service key. Hence the changes done to the service endpoint in OSR wont get automatically propagated to the osb business service as there is no actual dynamic look up.

You will need to setup the Target system's server certificate as trusted in Weblogic's keystore or the Root CA certificate which certified target system's server certificate as trusted CA in weblogic.
Check this thread for more details:
Callling an external service through HTTPS

How to Define MQ message expire time in OSB Business service.

Hi,
Please let me know the option in OSB business service to set the expiration time for MQ messages. Is it possible?
Thanks,
karthik.

http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/mqtransport/transport.html
transport header "Expiry"
i hope it works :o)

How configure reporting services configuration with sql server business development studio

I have installed sql server 2008 r2 mixed mode(sql server authentication) with native mode
I want to run report using reporting services config manager.
I made report in ssrs and I have configured reporting services configuration and web url from RSCM( reporting services config manager), i put on ssrs report.
report is build and deployed but when i take deployed url on Internet explorer, it shows the window below:
when I put the password nothing happened . if I put url in google chrome then it shows authentication required window like the same in IE
if I passed username=(levent/sa) and password then goes on window but does not see on page, if I passed only administrator name (levent) not passed sql server login name (sa) then does not close 'Authentication window'
'Computer connect net with modem'
before i tried on earlier PC, it worked fine.
setting is below link like this.
only set service Account is Use_built=NetworkSrvice
link
http://www.azurecurve.co.uk/2012/02/how-to-configure-sql-server-reporting-services-in-order-to-deploy-reporting-services-reports-in-gp/
what is the problem
Plz give suggestion quickly

Hi tusharshinde,
Per my understanding that when you log in the report Manager you got the pop-up window ask for credential, you try to enter the SA account and the window account as the username and password but both not work, right?
Your issue related to the authentication. As you mentioned you have choose the ”Network Service” as the Service account, generally using this account in RSCM and RSWindowsNegotiate is added to the RSReportServer.config file as the default setting. With this
setting, the report server can accept requests from client applications requesting Kerberos or NTLM authentication. If Kerberos is requested and the authentication fails, the report server switches to NTLM authentication and prompts the user for credentials
unless the network is configured to manage authentication transparently.
The issue can be caused by many factors and please check one by one.
Did you enter the username and password for three times and got blank page or got some error? If you got some error, please provide the error information.
you can delete the specific Authorization Types inside rsreportserver.config file, open path:” \Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportServer\rsreportserver.config”.
Search the file for the “AuthenticationTypes” section. Remove RSWindowsNegotiate and RSWindoeBasic to ensure only “RSWindowsNTLM” is specified in the file rsreportserver.config file.
Before do any modification, back up the files and remember to restart the ReportServer instance in the RSCM after the modification.
If step1 doesn’t work ,please also do the trusted Site Setting in the Browser, article with details steps for your reference:
http://technet.microsoft.com/en-us/library/bb630430.aspx
Please check the Report Manager's authentication mode.Have a look in the Report Manager's web.config file to check if you can find below information under the <system.web> (Path is “C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting
Services\ReportManager\Web.config ” ).
authentication mode="Windows"
identity impersonate="True"
Similar threads for your reference:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/23c5daa0-3232-4e8c-89c9-4526960c9d14/ssrs-2008-credentials-login-prompt?forum=sqlreportingservices
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/0778e2ca-0fb1-4b5c-996c-6e327b5e1473/user-logon-credentials-for-ssrs-web-server-setup?forum=sqlreportingservices
Please tried to provide us more details information, if the problem still exists:
Did you login in the report manager locally or remotely via Browser and which URL you are using to login the Report manager?
Did you modified some configuration file before and what did you modified?
Did your windows account have the right permission to access the report manager?
Any problem, please feel free to ask.
Regards
Vicky Liu

Issue while attaching OWSM policy to OSB Business Service

How to configure OWSM policy to NON WSDL based Business service.
We are not able to encrypt the data for NON WSDL based Business service.
Please help.
Thanks,
Mihir

I presume you already did a fresh restart of the managed servers?Yeap, I've restarted the OSB server.
Looking at the logs I can find this message:
+####<Jul 27, 2011 1:25:52 PM CEST> <Info> <Common> <mydomain.com> <osb_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000J5fLsXLFw0WFLzNM8A1EBzMW000001> <1311765952760> <BEA-000628> <Created "1" resources for pool "mds-owsm", out of which "1" are available and "0" are unavailable.>+
So I understand that the pool is created correctly, isn't it?

Business Services Configuration in SCSM or SCOM?

Hi Everyone,
I'm looking for someone with both SCOM 2012 and SCSM 2012 experience who can advise the best and/or preferred method of creating/populating Business Services in Service Manager 2012...
The reason that I ask is that once we have a rock solid process for logging Incidents and Service Request, our next major priorities will be to get "basic" reporting & change management working.
Change Management will obviously use the Business Services in the usual way - to manage changes that will affect the business service, whereas the level of reporting we want to obtain from the "basic" reporting is what Incidents have been occurring
(possibly which categories they were logged under) and which Business service the Incidents Affected.
Now, this is where I'm in two minds:
On one hand a "non-technical" Microsoft field engineer suggested to create business service "place holders" and then configure SCSM to use these "dummy" (non-configured) business services for reporting purposes.
On the other hand we have SCOM 2012 and I believe the preferred method is to import SCOM distributed Apps as Business services which has many additional long term benefits like being able to manage the end-to-end "Availability" of a Business Service
etc.
My biggest issue with creating "place holder" Business Services in SCSM is the amount of time it will take to configure all the templates with the "dummy" services only to have to reconfigure everything once we Import the "Real"
Business Services from distributed apps configured in SCOM. It seems like a LOT of double handling to me.
So, my question is basically (bare with me because I have VERY little SCOM knowledge) is there a way to create an MP in SCOM which would contain a "Distributed Application Template" (VERY basic Config) which can simply be duplicated MANY times
and change it's name to match each of our Business Services. Once done the MP containing the Distributed Apps can be imported to SCSM and then the Business Service would still be "Dummy" blank place holders but they've also be the legitimate/actual
Distributed apps that we will want to be using later down the track.
If we went down this path and we kept an unsealed copy of this management pack, would it also be possible to go back and make changes to the MANY distributed apps to update the CI relationship information in SCSM?
Hope this makes sense... basically I thought it would make more sense to create the "dummy" Business Services in SCOM and import them to SCSM for use now and in the future rather than create the "dummy" business services in SCSM now only
to replace them with new imported Business Services from SCOM.
Your thoughts, ideas and guidance will be GREATLY appreciated.

Self Bump

Is it possible to call a Web Application from OSB Business Service

Hi,
Is it possible to call a Web Application that has URL - http://host:port/parse.php using a business service in OSB?
What I have seen is it is able to call the service but the data we are sending that is the string in the form of the URL encoded data is not going there. Any help would be appreciated.
Regards,
Anuj

What I have seen is it is able to call the service but the data we are sending that is the string in the form of the URL encoded data is not going there. Any help would be appreciated.How did you configure your BS. My guess is some thing to do with what your BS is configured and what the Back-end is expecting? HTTP Get Vs HTTP Post
Manoj

OSB - Business Service Import Problem

Hi,
When I import my OSB project (from an Oracle Service Bus Configuration .jar) for the first time, it imports my business service perfectly. However, in the second half when the project already exists on the workspace, new tags are added to the xml even though I have not made any changes in the business service.
Thats my problem:
First Import:
<ser:coreEntry isProxy="false" isEnabled="true">
After Second Import:
<ser:coreEntry isProxy="false" isEnabled="true" isTracingEnabled="false">
and a few other tags are added to the file:
<ser:throttling enabled="false">
<ser:capacity>0</ser:capacity>
<ser:maxQueueLength>0</ser:maxQueueLength>
<ser:timeToLive>0</ser:timeToLive>
</ser:throttling>
<tran:delay-interval-configuration isEnabled="false">
<tran:delay-interval>0</tran:delay-interval>
</tran:delay-interval-configuration>
Any help on how to import the project without these new tags in my business service will be very welcome.
Regards,
Ricardo Azevedo

you can influence the amount of info actually imported choosing to override operational settings, environment setting etc (I can't remember by heart and I am too lazy to start my server now and verify)
Anyway unless this impacts your operations I would not be too worried that some defaults are explicitly stated in the xml. Surely if you import in Production a BS with "message tracing" on, this can affect seriously your performance.

List Business Services Endpoints with WLST

Hi,
We're using OSB 11.1.1.3 and 11.1.1.6 in several environments.
We just need to use wlst scripting to keep track of all business services and their endpoint uri's automatically.
We tried using some old scripts but found out that they don't work on 11g installations:
We tried the following code:
connect('weblogic','oracle10','t3://soavm2:7001')
domainRuntime()
sessionName = "FindServicesSession" + str(System.currentTimeMillis())
sessionMBean = findService(SessionManagementMBean.NAME, SessionManagementMBean.TYPE)
sessionMBean.createSession(sessionName)
servConfMBean = findService(ServiceConfigurationMBean.NAME + "." + sessionName, ServiceConfigurationMBean.TYPE)
alsbCore = findService(ALSBConfigurationMBean.NAME, ALSBConfigurationMBean.TYPE)
allRefs=alsbCore.getRefs(Ref.DOMAIN)
for ref in allRefs:
typeId = ref.getTypeId()
if typeId == "BusinessService":
serviceDefinition = servConfMBean.getServiceDefinition(ref)
endpointConfigration = serviceDefinition.getEndpointConfig()
print endpointConfigration
We get a "AttributeError: 'NoneType' object has no attribute 'getServiceDefinition'" error. It seems that it is related to metalink note "How To Modify Service Configurations By OSB JMX API [ID 1431254.1]". However the code provided there is for java through jmx, does anybody has a working example of how to do that on wlst?
Thanks!

Hi Marc,
What i found is that we can get list of business services URIs by consulting SERVICE_URI_TABLE...
Here's a script that reads a parameter file (which can have multiple domains information) with connection info and then gets all services and prints a list of the service name and URI on a file for each domain...
# params.txt format:
# user,passwd,admin-url
# Ej:
# weblogic,weblogic1,t3://adminsoa:7001
# weblogic,weblogic100,t3//adminsoa2:7001
import wlstModule
from com.bea.wli.sb.management.configuration import SessionManagementMBean
from com.bea.wli.sb.management.configuration import ALSBConfigurationMBean
from com.bea.wli.sb.management.configuration import BusinessServiceConfigurationMBean
from com.bea.wli.sb.util import EnvValueTypes
from com.bea.wli.config import Ref
from com.bea.wli.sb.util import Refs
from xml.dom.minidom import parseString
f1 = open('/tmp/params.txt','r')
for line in f1:
spline=line.split(',')
usr=spline[0]
pwd=spline[1]
url=spline[2].replace("\n","")
try:
connect(usr,pwd,url)
domName=cmo.getName()
domainRuntime()
sessionMBean = findService(SessionManagementMBean.NAME,SessionManagementMBean.TYPE)
sessionName="WLSTSession"+ str(System.currentTimeMillis())
sessionMBean.createSession(sessionName)
alsbSession = findService(ALSBConfigurationMBean.NAME + "." + sessionName, ALSBConfigurationMBean.TYPE)
alsbCore = findService(ALSBConfigurationMBean.NAME, ALSBConfigurationMBean.TYPE)
allRefs=alsbCore.getRefs(Ref.DOMAIN)
fileName='/tmp/'+domName+'_'+url.replace('t3://','').replace(':','')+'_BServicesLista.csv'
f2 = open(fileName, 'w')
f2.write('Name'+','+'URL'+'\n')
for ref in allRefs:
typeId = ref.getTypeId()
if typeId == "BusinessService":
name=ref.getFullName()
uris=alsbSession.getEnvValue(ref, EnvValueTypes.SERVICE_URI_TABLE, None)
xml=parseString(uris.toString())
xmlTag = xml.getElementsByTagName('tran:URI')[0].toxml()
xmlData=xmlTag.replace('<tran:URI>','').replace('</tran:URI>','')
f2.write('\"'+name+'\"'+','+'\"'+xmlData+'\"'+'\n')
f2.close()
except Exception,e:
print "Error trying to connect to " + url + 'Error: ' + str(e)
f1.close()
disconnect()
It's been working for us so far...

Issue on OSB business service configuration with email transport

Similar Messages

Maybe you are looking for