Issue with starting tomcat in windows for webcenter sites installation

Hello All,
I have been trying to install oracle webcenter sites on windows 7, I followed all the steps in the documentation for the configuration and setup. but anytime I start the tomcat using the startup.bat script I get errors as shown below.
C:\WCS11gR1\tomcat\bin>catalina debug
Using CATALINA_BASE: "C:\WCS11gR1\tomcat"
Using CATALINA_HOME: "C:\WCS11gR1\tomcat"
Using CATALINA_TMPDIR: "C:\WCS11gR1\tomcat\temp"
Using JAVA_HOME: "C:\Program Files\Java\jdk1.7.0_21"
Using CLASSPATH: "C:\WCS11gR1\home\bin;C:\Program Files\Java\jdk1.7.0_21\l
Initializing jdb ...
runrun org.apache.catalina.startup.Bootstrap start Cannot run program "C:\Program": CreateProcess error=2, The
system cannot find the file specified
at java.lang.ProcessBuilder.start(
at java.lang.Runtime.exec(
at java.lang.Runtime.exec(
Caused by: CreateProcess error=2, The system cannot find th
e file specified
at java.lang.ProcessImpl.create(Native Method)
at java.lang.ProcessImpl.<init>(
at java.lang.ProcessImpl.start(
at java.lang.ProcessBuilder.start(
... 11 more
Fatal error:
Unable to launch target VM.
If I run it by clicking on the bat file directory I get this error in my catalina log file below:
May 27, 2013 5:04:48 PM org.apache.catalina.startup.Catalina start
SEVERE: Cannot start server. Server instance is not configured.
Kindly advise me on what to do to resolve this issue.

Yes I did that all the commands give me error.
If I use the startup.bat I get a list of errors ending with:
org.apache.catalina.startup.Catalina start SEVERE: Cannot start server. Server instance is not configured.
but I have configured the instance using the following settings for windows:
SET JAVA_HOME=C:\Program Files\Java\jdk1.7.0_21
SET CS_HOME=C:\WCS11gR1\home
SET CATALINA_OPTS=-XX:MaxPermSize=192m -Dfile.encoding=UTF-8 -Dnet.sf.ehcache.enableShutdownHook=true

Similar Messages

  • Issues with Safari 3.0.1 for windows

    Issues with Safari 3.0.1 for windows (at work):
    Lenovo T60 with intel core duo T7200 @2.00Ghz plus additional monitor (Lenovo ThinkVision) in extended desktop mode running Windows XP Pro 2002, SP2
    1. Taskbar is configured to autohide: when Safari is the top (active) window, it remains on top. If the taskbar pops up, it does so behind the Safari window, because I cannot see it.
    2. If an open Safari window is dragged to the external (secondary) monitor, then maximized, it disappears to the side. It is not closed. I can still find it via Alt-tab or in the task bar and can, by right-clicking ‘Move’ from the taskbar use the arrow keys to move the window back into place. Clicking to reduce the window, then re-maximizing leads to the window disappearing to the side again.
    3. In general my impression is that this does not function at a ‘beta’ level, but more of an ‘alpha’ level. Still very buggy.
    iMacIntel Duo 2Gh   Mac OS X (10.4.7)   1G-RAM, 250vRAM
    iMacIntel Duo 2Gh   Mac OS X (10.4.7)   1G-RAM, 250vRAM

    This is a beta...thats why they give you the option to report probs via the bug icon. Since you are having these probs try and report them, I am not sure if apple has the time to scan these forums to try and find the big probs that people are having. So unless you report bugs, (and wait until the final realease) then they might never get noticed and or fixed.

  • Issues with illustrator 10 and windows 8

    any known issues with illustrator 10 and windows 8...version worked fine on windows computer with windows cannot seem to operate. Loads, and shows access but will NOT start up. help ! thanx ttp74

    AI 10 is now 10 years or so old and was never tested on nor designed for Win 7 or Win 8. You should simply assume it's not compatible and will never run properly. feel free to spend your time with the compatibility modes and al lsorts of hacking with the security stuff and otehr settings, but to be honest, it will probably be a waste of time.

  • Initial issues with PS CS4 Extended Windows XP Pro.

    Initial issues with PS CS4 Extended Windows XP Pro.
    CS3 worked just fine but had many issues with Bridge CS3. So frustrating that the $$ to upgrade to CS4 seem worth it. Mostly works OK with the following exceptions:
    1. Sometimes the file menu selections are non-selectable grey including fundamental functions like Open and Exit not even clicking on the x will allow PS to close! I found a workaround, I can select a tool that is not currently selected (like the crop or brush) and now the menu items appear.
    2. The Arrange Documents drop down menu is blank except for the lower text portion. All icons are missing. Roll over text popup shows what is supposed to be on the menu but no icons.
    3. I have setup Bridge CS4 to auto start at logon. Works OK but sometimes for whatever reason stays busy after I close. Task Manager shows Bridge using up to 25% of CPU time and the program is not even open!
    5. I purchased a couple Canon EOS 50Ds as backup cameras for our business. Worked last week with CS3 and Bridge with Raw 4.6 upgrade. Does not work with RAW 5.0 in CS4bummer!

    I had the same problem with blank/missing "Arrange Documents" icons. And I use NIK and OnOne plugins (CS4 & Vista). These plugins are all supposed to be compatible with CS4 and I use them ALOT - so I refused to remove them. Today I also started having a problem with an error re: needing to install a printer before I could select print functions.
    I found the answer to both problems!! While researching the error message I found information from Adobe support stating that you should:
    1. Quit Photoshop
    2. Vista: Rename the Users\[username]\AppData\Roaming\Adobe\Adobe Photoshop CS4\Adobe Photoshop CS4 Settings\Adobe Photoshop CS4 Prefs.psp file to Adobe Photoshop CS4 Prefs.old
    Windows XP path: Documents and Settings/[username]/Application Data/Adobe/Adobe Photoshop CS4/Adobe Photoshop CS4 Settings/Adobe Photoshop CS4 Prefs.psp
    3. Start Photoshop - it will create a new preferences file.
    My print error message is gone AND I have Arrange Documents icons!!!

  • HT4527 Is there an issue with home sharing and windows 8?

    Is there an issue with home sharing and windows 8? I've tried everything and cant get mine to work.

    Here is the entire error listing after it states the installation encountered errors.
    Exit Code: 7
    -------------------------------------- Summary --------------------------------------
    - 1 fatal error(s), 2 error(s), 13 warning(s)
    WARNING: DW066: OS requirements not met for {0D96CFE6-376D-44B8-808A-16F3BEB73263}
    WARNING: DW066: OS requirements not met for {601CB5BC-03F9-43CC-86F0-C75E65E6AF31}
    WARNING: DW066: OS requirements not met for {56AE7FCC-81B2-4A63-A171-CD95C9295EF2}
    WARNING: DW066: OS requirements not met for {4717AE70-5377-45C7-A9E9-4E400485F0BF}
    WARNING: DW066: OS requirements not met for {8B59B329-26C1-48A4-A5AA-923F55B17B87}
    WARNING: DW066: OS requirements not met for {948B7277-3D4C-4672-B1DB-24B3C83D704E}
    WARNING: DW066: OS requirements not met for {25303D67-B573-460C-A0B6-B5CF2AE05045}
    WARNING: DW066: OS requirements not met for {33E08F4F-42B7-42A9-89E4-443E02738DB0}
    WARNING: DW066: OS requirements not met for {D5B1535A-FDFC-4B40-B2E2-21DA83D9CB57}
    WARNING: DW066: OS requirements not met for {AD60EB24-4CEE-4CA0-A6AA-526EAF41F2DB}
    WARNING: DW066: OS requirements not met for {F9FAC696-2E48-497D-B820-C9A65DA630DF}
    WARNING: DW066: OS requirements not met for {7DE6CDC3-CFEE-4564-813D-3F59E5D71F10}
    WARNING: DW066: OS requirements not met for {C92E440F-EE79-4A28-B1E1-EC82B6F2AF33}
    ERROR: DW020: Found payload conflicts and errors:
    ERROR: DW020:  - Adobe Flash CS5.5 depends on Adobe Flash Player 10 ActiveX to be installed.
    FATAL: DW020: Conflicts were found in the selected payloads. Halting installation.

  • Jump Start Kit for Webcenter sites - Where is the download URL?

    Hi All,
    I would like to download the Jump start Kit (JSK) for WebCenter Sites. I read in online that it is under Oracle support under Patches and Updates. But i didn't see any tab called Patches and Updates under I already registered with, so when i try to login, it is asking for Support Identifier number. Please help me to download JSK.

    you need to provide the support id and get the appropriate permissions to download the JSK and other webcenter products.
    I have downloaded it from Oracle support site only. But only after my customer has authorized me with their support id and gave me the permissions to download.
    Many Thanks.
    Aneef K

  • I am having a issue with getting data useage alerts for my iphone 4s

    I am having a issue with getting data useage alerts for my iphone 4s from AT&T.  I do not download anything huge at all.
    I looked into it and figured out that the phone dials out nightly at 12:29am every night.   I went into my settings and went to general..about..diagnostics and useage..then diagnostics and useage data to see this.  I then clicked don't send...but I am still getting useage alerts.  Can anyone help me please...

    Honestly, from reading the thread linked, they all come off as a bunch of whiney people that cannot be bothered to help themselves.
    Little to nothing in that thread indicates an issue beyond inept consumers.  Yes, I read several pages on the incessant gripes.  Very few made any actual attempts to troubleshoot issues before whining about the "Apple issue" and those that did actual troubleshooting got their issues resolved.
    So no, Apple has nothing to fix beyond a few specific devices that are experiencing hardware issues.
    If you have actually put forth effort and done the basic troubleshooting, take the device to Apple for evaluation and possible replacement.  Whining will get nothing accomplished.

  • OBIEE 11g ( - Issue with starting Node Manager

    Have anyone faced an issue with starting Node Manager in OBIEE 11g ( OS is 64 bit Linux, WebLogic is 10.3.5. I used the software-install method and followed by running Everything completed successfully. I updated the catalog and rpd location in the FMW control screen.
    To get it activated I bounced services and when I try to start Node Manager it gives below error --
    <Aug 30, 2011 2:02:42 PM CDT> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify>
    <Aug 30, 2011 2:02:42 PM> <SEVERE> <Fatal error in node manager server> Unsupported cypher suite: TLS_RSA_EXPORT_WITH_RC4_40_MD5
    at weblogic.nodemanager.server.SSLListener.init(
    at weblogic.nodemanager.server.NMServer.start(
    at weblogic.nodemanager.server.NMServer.main(
    at weblogic.NodeManager.main(
    Aug 30, 2011 2:02:42 PM weblogic.nodemanager.server.NMServer main
    SEVERE: Fatal error in node manager server Unsupported cypher suite: TLS_RSA_EXPORT_WITH_RC4_40_MD5
    at weblogic.nodemanager.server.SSLListener.init(
    at weblogic.nodemanager.server.NMServer.start(
    at weblogic.nodemanager.server.NMServer.main(
    at weblogic.NodeManager.main(
    + set +x
    I see the same issue reported in ML OBIEE 11g - Node manager fails to start upon upgrade [ID 1329442.1] and WebLogic Server: Node Manager Startup is Failing with Unsupported cypher suite [ID 1329260.1] I tried to modify But it didnt help me.
    Please let me know if anyone have faced similar issue and what exactly did you do to resolve it.
    Cherrish Vaidiyan
    Edited by: Cherrish on Aug 30, 2011 3:14 PM

    There are Two types of Cipher suites --- Certicom Cipher Suite and SunJSSE Equivalent Cipher Suite. And with Weblogic 10.3.5, you are using Sun JSSE Cipher Suite, and by default Node Manager uses the Certicom Cipher Suite.
    In the, Add CipherSuite=SSL_RSA_EXPORT_WITH_RC4_40_MD5, save and restart Node Manager.
    Reference Metalink Note: WebLogic Server 10.3.x: Getting "Unsupported Cipher" Exceptions When Starting Node Manager [ID 1307325.1]
    Cherrish Vaidiyan

  • Does anyone have issues with start up time

    does anyone have issues with start up time

    Have you tried a reset?
    Press & hold both Home & Power until you see the Apple logo.
    If that doesn't fix it, restore it as new and see if that fixes it.

  • How to download jsk for webcenter sites

    How to download jsk for webcenter sites

    well you must have a paid account in oracle support.
    -Login to My Oracle Support (
    -Click the Patches & Updates tab
    -Search by "Product or Family" and enter "Oracle WebCenter Sites" for the Product.
    -Select "Sites 11GR1" for the Release and click Search.
    -You will see "Oracle WebCenter Sites 11gR1 Jump start Kit (Patch)"

  • What is recommended Jrockit  GC policy for Webcenter sites

    Currently we are using jrockit-jdk1.6.0_45-R28.2.7-4.1.0 for fatwire webcenter sites and its currently uses Genparpar GC, we would like to know What is recommended Jrockit  GC policy for Webcenter sites.

    Hello Sumanth,
    We do not have any specific garbage collector recommendations for JDKs earlier than 1.7 except that G1GC is not recommended for JDK1.6.
    See also Doc ID 1956788.1 and Doc ID 1495193.1.
    Kind regards,

  • Anyone else having an issue with TCP connections using iCloud for Windows?

    Before I asked this question, I did wait to see if any related questions came up, but none did, so I submit it now.
    On my admittedly older laptop running Windows 7 64b Home, I've run into difficulties with the iCloud for Windows app to the extent that I had to uninstall it.
    It would that, as my laptop was running, in the background, iCloudServices.exe would endlessly iterate TCP connections, which, while not actively sending or receiving any data, after some hours would number over 100 instances, taking up resources, and grinding my laptop's WiFi connection to a grindingly slow pace. I ended up, within the app, turning off everything, iCloud Drive and Photos, (I never used bookmarks), but still this would continue to occur.
    I contacted Apple Support, explaining what was going on, and they stated they only dealt with IOS and gave me a Microsoft Support number. When I called Microsoft support, I came more and more to the realization that the issue was specifically with the iCloud for Windows app, as that was the only software that was endlessly creating and not closing TCP connections as it was. How was Microsoft supposed to solve an issue with Apple code?
    So I called Apple back, whereupon they insisted it was a Microsoft issue. I explained other cloud services installed on the same computer were not having the same issue, it was unique to ICloudServices.exe. They stated they only dealt with IOS. I stated I purchased an iPad Air less than 7 months ago, and was trying to run iCloud in support of that.  They again stated they only dealt with IOS, and suggested I again try Microsoft. I asked them if it was reasonable to expect Microsoft to solve issues with Apple code? They said regardless, there was zero support offered for anything having to do with Windows, and all I could do was uninstall the app, which I did, though that did not feel very satisfactory to me. My thinking is, if Apple writes a Windows app in support of their hardware, they should offer support for it.
    Anyway, I was just wondering, is this an issue unique to me? or have others experienced a similar issue? I found this issue by opening the Windows Resource Monitor, looking under the Networking tab, and scrolling through the TCP Connections section to find 100+ concurrent iCloudServices.exe instances listed, whereas even Chrome, with multiple tabs and extensions, topped out at around 20.
    My one month old Desktop, DYI, sports a solid Asus 1150 MoBo, i7-4790k cpu, 16GB Ram, and an EVGA GTX 970 video card. I list some specs only to illustrate this computer has no hardware issues in comparison to my long in tooth laptop. On this desktop, running Win 8.1 Pro 64b,  at least as many, identifiably Apple, background service TCP connections are created even compared to Chrome, regardless of many tabs being open, many extensions, and even some related apps. Adobe does not even come close, though I run the full CC subscription. On this new computer, running Windows 8.1 Pro 64b, there are currently over 50 TCP connections and loopbacks that do not identify themselves, with just a - for the Image, and PID. With the experience on my laptop, I wonder how many of these are generated by Apple software, if not specifically iCloud software?
    The frustrating aspect of these connections is they seem in no way active, While the Chrome and Adobe connections can be seen to be transferring data, as long as I am not running iTunes, or so have my iPad actually plugged in, it seems 99% of the time these iCloudServices.exe connections are just taking up ports, neither sending nor receiving any data discernable to me under the Processes with Network Activity, or Network Activity lists, both displayed in the same window as the TCP Connections in the Windows Resource Monitor.
    Though I am fairly ignorant as regards coding, it seems as if there is no call to close a connection, very specifically, iCloudServices.exe, when it is no longer needed, and the next time a connection is needed, a new one is opened, rather than accessing the one previously opened. The only other reason I could imagine this might be occurring is if my Norton Internet Security software might mask and/or block the port after a certain time of inactivity.
    Anyone out there have any ideas or advice about this? Thanks in advance.

    Thanks jared,
    I'm still dealing with this issue through Apple. Some time after I posted this, I contacted Apple again. They did start a case up for me, as I was experiencing the same behavior on two different machines, with two different versions of Windows.
    So far it remains unsolved. I've logged iClouds for Windows on my desktop, which is brand new, then logged for awhile after completely uninstalling Norton Security Suite, depending on the Microsoft security for some time, and finally logged after I uninstalled iCloud for Windows, restarted, installed a clean download, and connected using a completely different test account, which Apple set up for me. None of this made any difference. Looking at the logs, it seems every 10 minutes, iCloudServices.exe creates a new TCP connection to confirm I'm using less than 5GB on iCloud, (which I am by a good margin, using less than 2GB), it seems this connection is not closed, and when the next iteration rolls around 10 minutes later, a new TCP connection is created. I come very close to having 6 TCP connections created per hour, until I restart my computer. This works out to... 6 x 24 = 144/day.
    Perhaps the article you posted will shed some further light on this. I'm thinking seeing the state of the connection through netstats, at the least, could help.
    For the last week, I've been putting a hold on further logging, as Apple wants me to create a new user account on one of my computers, install iCloud for Windows there, and log it running in the other account. This however basically means I cannot use my computer for a fair number of hours, and I've been busy enough with work the past week that I haven't the time or energy to afford to set this up and run it. I've had need of my computers too much for the past week.

  • Compatibility issues with AppleWorks 6.2.2 for Windows and Windows XP?

    For several years I have used AppleWorks for Windows version 6.2.2 with Windows 98. This summer my school upgraded me from W-98 to W-XP.
    On the new machine, I have found that text boxes in draw documents are locked and I cannot edit or move them or unlock them. I find that I have the same issue with an XP computer at home, but I can copy the same file to a W98 machine and everything works as it always did.
    Apple says that AppleWorks 6.2.2. is compatible with XP, but I wonder if that is completely correct.
    Does anyone have any insight?

    I was trying to test this for you in AppleWorks 6 Windows XP in Parallels on my MacBook Pro, but each time I tried to open a draw file I had originally create on my Mac, AppleWorks 6 for Windows crashed.
    I tried another, smaller draw document & it opens without problems & I can move the objects around. I'd suggest deleting the AppleWorks preferences, but I don't know where they are in Windows XP.

  • Issue with starting the emctl dbconsole

    Hello All,
    I need your help related to the below issue with the emctl, I am using Oracle 11g R2 on windows XP.
    My enterprise manager was working well.
    But at some day i was not able to start the dbconsole with error net msg
    A service specific error occurred: 1.
    More help is available by typing NET HELPMSG 3547.
    I fixed the issue by modifying the file : C:\app\oracle\product\11.2.0\dbhome_1\VirtualXP-20239_windb\sysman\config
    agentTZRegion=+03:00 instead of agentTZRegion=Europe/Minsk
    But again i faced an issue that localhost_windb is not found so i made a new copy of the folder VirtualXP-20239_windb but with name localhost_windb.
    Now the emctl start dbconsole is working with result sucsseful
    but the emctl staus dbconsole returning that the enterprise manager 11g is not running and i am not able to access my EM.
    Any solution..
    your help pls

    It looks like the name of your host has been changed. Have you changed the hostname intentionally or do you use DHCP service for naming your system? You should use a static IP and hostname for DB system (please refer to installation requirements).
    If your hostname has been changed, DBControl needs to be dropped and re-created.
    Please read MOS [ID 467598.1] The Database Console Fails to Start After a Change in the Hostname:
    Please read MOS [ID 278100.1] How To Drop, Create And Recreate DB Control In A 10g/11g Database

  • Issue with Star Ratings in Windows Media Player 12 on Win7

    The particular issue I'm having is this. I can star rate my music a 1, 2, 3, or 4. However if I try to rate anyone particular song a 5 star Rating, it shows it as a 0 star rating. This is happening on my desktop system as well as my laptop.  I never
    had this problem before. And I'm not really sure when this problem started. Also, it shows 5 star rated songs a 0 star rating in explorer as well. Any help to figure out this issue would be greatly appreciated. Thanks in advance for all who reply.

    Hi Cougar Mutimedia ,
    Will the issue occur with specific file type , specific file or all the file ?Have you tried to re-join the music to have a check ?
    We can try the built-in troubleshoot tool to have a check :
    Control Panel\All Control Panel Items\Troubleshooting\All Categories\Windows Media Player Library ,Windows Media Player Settings
    Or try the following tool :
    Fix Windows Media Player video, and other media or library issues
    If the issue persists,we may need to reinstall the Windows Media Player to have check .
    Click “Start” button, type “windows features” in the program search box and hit enter.
    1. In the “Windows Features” dialog box, look for “Media Features” and expand it.
    2. Clear “Windows Media Player” check box.
    3. As soon as you clear the check box, you will see a pop-up saying that “The following Windows features will also be turned off because they are dependent on Windows Media Player.” The listed program is “Windows Media Center”.
    4. Go ahead and click “Yes”. Windows will now begin uninstalling WMP12.
    5. You to restart Windows for the uninstallation to complete.
    6. Click “Start” button, type “windows features” in the program search box and hit enter.
    7. In the “Windows Features” dialog box, look for “Media Features” and expand it.
    8. Check boxes “Windows Media Player” and “Windows Media Center”.
    9. Click “OK”. Windows will take some time in reinstalling them. Wait for the process to finish.
    10. You to restart Windows for the installation to complete.
    Best regards
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Maybe you are looking for

  • IMovie 6.0.3 quits unexpectedly while using the trrndlines plugin

    Hi, I am using iMovie 6.0.3 and everything was working fine until yesterday evening. Since yesterday evening, I can open iMovie 6.0.3 but everytime I click on "EDITING" or "MEDIA" the application closes and I get the message "iMovie quits unexpectedl

  • How to add a text area in a Content pane..?

    Hi, I created a content pane with 5 buttons. One of them is a quit button, and I was able to create an "system.exit(0)" event handling for him. My problem is.. I have 4 other buttons, and I want them to show some text when I click them. How do I add

  • Acrobat Reader is not properly displaying dynamic drop down when LiveCycle does

    I have a sample file that loads a drop down menu from an xml file. This form works fine in the preview pane of LiveCycle. I see the values properly populated. When I attempt to load the same file with Acrobat Reader the drop down menu shows up empty.

  • ISE - User limitation

    Hi, I know there is endpoint limitation of 2000, 10,000 and 100,000 concurrent endpoints, depending on deployment options. Is there any limit on maximum number of "users" ISE supports in these deployment options?       All the design documents talk o

  • Regarding no message in content area.

    What is happening if someone I know is sending out messages on an I Pad and the receiver gets nothing in the content area?