Item 000010 does not exist Message no. V1331

Hi Experts
While creating third party sales order with Item Category "TAS", I am getting the error "Item 000010 does not exist
Message no. V1331" . What would be reason for it and also kindly help me with the solution for this.
Thanks and Regards
M.Dheerendar Jain

Hi,
Check the following OSS notes, if they're applicable:
127309      Error V1331 when you create sales orders
420093      Message V1331 with item entry in the sales order
1375071      Message V1 331 when you create subitems using IDocs
Regards,
Raghu.

Similar Messages

Item 000010 does not exist - Error Message V1331 in VA41

Dear Experts,
We r implementing PS module for a client.
I am using a exit MV45AFZZ, in which i have a perform ZVALIDATEWBS, i am calling this include through a subroutine.
In this ZVALIDATEWBS routine -> i have validated 2 conditions
1. Validation for Partner function and
2. Validation for WBS element.
For 1 ---> I am comparing with VBPA partner and throwing error message if the partner entered doesnt match with the project code
For 2 ---> i am checking the status in JEST table if STAT = 'I001' and INACT field = 'X' for a object number i am throwing error as " WBS must be in u2018 Created-CRTDu2019 status".
The problem which iam facing is...
After entering the line item and WBS for the material and after doing Incompletion log and pressing save i am getting a error stating
"Item 000010 does not exist" ( Message no. V1331)
When i comment the error message which is thrown in my exit i am able to save without any error message, i am not getting the standard error - "Item 000010 does not exist" (Message no V1331).
When i debug the code i am not able to predict, becuse if i comment the messages(only message not the whole exit) the standard program called is different, when i uncomment and check them its going for some different program.
Kindly help me in this regard.
thanks
Krish

Hello Krishna,
Thanks for the reply
this message was from the standard SAP i just copy pasted the message.
a STOP icon in the front along with this following message -> "Item 000010 does not exist",
If u can able to give ur mail id i can send the screen shot also. But any clues w.r.to this error.. anything should i need to check in.
kindly advice
thanks
Krish.

Error "Item 000010 does not exist" while creating sales order in VA01

Dear All,
As per customer requirement we are trying to validate shipping data( item level) and unloading point( item level) by customer enhancement.
Enhancement:       V45A0003
Function Module:    EXIT_SAPMV45A_003
INCLUDE:                ZXVVAU05
Inside include we have written validation code that if user enters any wrong value for shipping data or unloading data
system will throw error message accordingly.
It is working fine and we are getting error message if wrong shipping data or unloading data is entered.
But after the error message is displayed if we try to save the sales order again system throws a STOP message as a POPUP
saying "Item 000010 does not exist".
Now,if we enter proper shipping data or unloading data and try to save the salesorder it is throwing error "Item 000010 does not exist"..
Please let me know your valuable input on this.
Regards
Arindam
Edited by: Arindam Ganguly on Mar 11, 2010 1:55 PM

It sounds like your error routine has prevented the insertion of the data in VBAP or XVBAP internal tables. Therefore, upon return to the screen and SAVE, SAP is examining the VBAP or XVBAP table, comparing to the 'I' index table probably, and finding that there is supposed to be an item 10, but it's not in the necessary table(s).    This may be resulting because your internal tables are now inconsistent.
Look at where your inserted error coding is occurring...you may want to move that to the SAVE_DOCUMENT_PREPARE routine in MV45AFZZ, so that everything will have been built, and a final check of the content will stop the sales order save until the data is corrected.
Edited by: Breakpoint on Mar 11, 2010 3:29 PM

"Item 000010 does not exist" During VA01 save

Hi all,
I have performed a validation to throw a error message if the validation fails. The code is written in side userexit_save_document, I get my error message which is correct. After my message gets triggered SAP standard popup error messgae "Item 000010 does not exist" gets triggered. I need to avoid this SAP stand message.
After my error message i have used EXIT statement.. during debug i found that the code goes to the sap standard after the error message instead of EXIT statement. It seems like there is screen sequence change. Any help would be appreciated.
Thanks

Hi,
Are you deleting the item and raising message? You get the standard SAP message if you delete item from XVBAP.
Don't delete it.
Try this:
Message S208(00) display like 'E' with <Your Message>.
Set screen sy-dynnr.
leave screen.
Sridhar

Sales order stock does not exist Message no. M7184

Hello Gurus,
I am getting this error while creating post goods issue.
"Sales order stock 1000000276 000010 does not exist Message no. M7184"
When i do MMBE it shows :
Finished Store 2300 Unrestricted use 2000
We are using MTO and in MRP 3 we have strategy group 20.
What i suppose to do in order to do PGI without any issue. Means SO -> Delivery ->PGI
Regards

HI
check your process that means for MTO cases Stock will be assigned to sale order line item so try to assign the stock to sale order line item
Assign stock to Sale order line item :
Go to MB1B , use movement type 411 and special stock indicator E , enter plant and Storage location and assign the stock to that Sale order and line item number
Check and Revert
Regards,
Prasanna

Getting error 'Item 00000 does not exist' while creating a salse order

Hi All,
We are facing an issue, we get an error message saying 'Item 00000 does not exist' while creating a sales order for a particular order type, we do not get this problem with all the materials, only a few of them and the materials which give a problem are part of the supersession chain. The problem is not even coming for all the superseded materials.
This problem is occuring with none of the other order types but just one. We have compared the configuration for the order types for which this error is not coming and the order type which is giving the problem, and its exactly the same.
When creating the sales order through VA01 even though the error message comes, but on hitting the enter button the processing goes further. But when creating the sales order through the background program the processing stops the moment the error message comes and the Sales Order does not get created.
Your valuable suggestions for helping us resolving this issue will be highly appreciated.
Regards,
Geeta

HI Geeta
As per your post "Problem is when you are executing VA01 in background sales orders are not generating due to error message".
Apart from configuration check alternative is "Take ABAPer's help and change this error message type to warning/information message type in the system". With warning/information message type you could be able to create sales orders in background also.
try and revert

Parked document 1000 700010042 2010 does not exist, Message no. FP076

Hi,
There is one Document which is not on tax return but made a entry in a GL account (VAT).
When I display document from FB03 for fiscal year 2010 the transaction code FB03 is diverting to FBV3 and giving error message : "Parked document 1000 700010042 2010 does not exist" "Message no. FP076"
I also checked the tables "BSEG" & "BKPF" where this document is visible to me also I checked the GL line items from FBL3N for the VAT GL where this document is showing in line items report, but when i double clik to display this documents again am getting screen of FBV3 with the same error message.
can any one let me know what could be the problem? and how to resolve this issue?
Many thanks in advance.
Regards,
Abdul

Hi Venkata,
Thanks for the information....
Addition to the above information ... there are 3 line items are there in this document 1 - K (Vendor), 2 - S (GL).
The strange thing I can see is against 1st line item (K-Vendor) there is a clearing document updated.
So if there is a clearing document against vendor line that means this document is no more in parking ...
I am not sure why system is performing like this...
Can anyone help me on this ....
Thanks in advance.
Regards,
Abdul

"Entry sheet does not exist message no. SE012"

Dear all,
One SES is created and saved. Now if i check system message as below.
"Entry sheet does not exist message no. SE012"
Please advice

Hi Deepu,
Please check in the PO, if in the Item Detail, The tab "Purchase Order History" is there or not, if it is there with the SES no, it means that the SES is created and you might not be able to view the same Please check the same no in the table ESSR.
Hope it helps you.
Regards,
Yawar Kahn

Invoice created via SUS having error -The template item 1 does not exists

Hi All,
We are in SRM6.0 and in our PRD system, we have few invoices created through SUS showing error "The template item 1 does not exist.
These invoices went into "To be corrected" status and when I hit check it gives me above error message. The message itself don't make much sense to me. Please note we can create new invoice in SRM manually and everything works fine.
Appreciate any pointers.
Thanks, Sachin

We have analysed the issue and found we are getting this error because these invoices are missing with "BE_LOG_SYSTEM" field in table BBP_PDBEI and "BE_REFOBJ_TYPE" field is showing "BUS2201 instead of "BUS2012".
Any feedback why we have these difference as compare to good invoices (created directly in SRM).
Thanks, Sachin

Object does not exist : MESSAGE OL 826 - Production issue

R/3 release 4.6C
Transaction: FB03
Custom WF: Triggering events: FIPP-CREATE and FIPP-COMPLETED
When we try to post a document (journal) the workflow gets triggered and reaches the approver. The approver approves it and then it gets posted.
Here in this case, after the approval the workflow running into error with u201Cmessage OL 826 Object does not existu201D
When I click on the message I get this information
Object does not exist   :   Message no. OL 826
Diagnosis :   You tried to create an instance of the object type EMPLOYEET with the
                    key 1234520080603. No instance of this kind exists.
                PERNR u2013 12345
     Date      - 03.06.2008
I checked this using the FM P_EMPLOYEE_CHECKEXISTENCE and it is working fine there. This FM is used in EMPLOYEET object for existence check.
Initially I thought the problem was with document and the buffer but after checking u201Cdiagnosisu201D message, it confirms me that this is related to Employee.
This is happening only to one employee and all other have NO issues.
I have checked with HR team and they reckon everything is fine from their side.
Since this is in Prod I am unable to debug and test.
I was looking into the previous forums to find the solution but couldnu2019t find RIGHT one. Could you please suggest any solution for this ?
Your help greatly appreciated.
Sreethan
Edited by: SAP User on Jun 12, 2008 12:13 PM

Dear Mike/Martin,
        Could you please explain a bit about the authorization problem?
        PERNR    A, B, C, and D do the posting the docs through FB01 and PERNR X usually do the approvals. the problem is happening onlyl with PERNR A ... if the approver has the auth problem then it could be same issue with other... please correct me if I am wrong.
    As Martin suggested I have contacted HR team but they say .... they dont see anything different or changes for this EMP. The personal record is coming from the EVENT FIPP-CREATE or COMPLETED so there is no manual interaction.
Just guessing: if this is the problem for all the employees then what could be the reason ? guessing that in random it is happening to this emp. He has posted 6 docs....all of them have the same issue. I checked last 3 months records and I did see Couple of workflows in last 3 months with the same error.... so just thinking if this is the problem with all emp happens onlly ramdomly.
Thoughts ??
Thanks & Regards,
Sreethan

Command $TAB : message Transaction $TAB does not exist Message no. S#343

when i use the command $TAB to refresh the buffers the system gives me the message
" Transaction $TAB does not exist
Message no. S#343 "
In some systems it works as intended. How can i correct that position.

try /$TAB

Infotype 2001 Record 00000000 000000000000000000000000000 does not exist Message no. PG225

Hi,
I am trying to create a record in infotype 2001 but getting error
Record 00000000 000000000000000000000000000 does not exist
Message no. PG225
This error not come before. I have created many records for the last few months.
Please suggest how to resolve.
Regards,
Pathi

Hi Pathi,
I guess this is because of Activity Allocation and Cost Assignment. Plz check the Number range assignment:
PA05 for Number range assignment for additional time data
PT12 for HR document posting
Thanks'
Gautam

Number range for object MDTB does not exist - Message no. 61501

Hi All ,
I have done the necessary configurations in PP say
Order Type
Order Type Dependent Parameters
Scheduling parameters for planned & production order
Confirmation parameters
Availabilty check etc
and iam able to create planned & production order and confirma the production order.
I want to configure for MRP: -
Settings done are
Have activeted planning file entry for all plants.
When i run MRP system throws a error <b>Number range for object MDTB does not exist - Message no.61501 </b>
Is there anything to do with plant parameters OPPQ and Mrp Group OPPR.
I just tried plant parameters,standard 0001 is not available for copying.
Suggest me how to proceed to set MRP.
Shankar

Hi shankar
it is a good practice while creating the plant copying the plant from the standard plant so that all the standard table enteries will be copied for the plant as the standard plant is not there youcan think of copying from any other plant similar to your plant which has the required entry. else
in SE16N check the NRIV table for the Object MDTB. if enteris found then make the table entry with the help of abaper.
hope this helps
regards
SK

I am getting this error message while accessing IT2002 Counting rule 2/01/001 does not exist Message no. 3H010

hi All,
I am getting this error message while accessing IT2002
Counting rule 2/01/001 does not exist
Message no. 3H010
Please guide ASAP
Regards,
Ayousef

Hi Ahmed,
Please go through the below mentioned thread.
scn.sap.com/thread/1187160
Regards,
Haranath

BP role UDM000 does not exist Message no. R1206

Hi Team,
I have created New BP role ZUDM0PY by copy of standard UDM000. Everything is working well , when I choose "Display BP" in Worklist   system throws error "BP role UDM000 does not exist Message no. R1206"
My doubt is if i am using BP role ZUDM0PY not UDM000 then why system throwing error for BP role UDM000? and what will be the solution.
Regards
Arun

Hi Arun.
I don't know why but 'Display Business partner' icon can shows only 'UDM000' now.
Please refer SAP Function UDM_WORKLIST_BUS_PARTNER_SHOW specified only 'UDM000' as follows.
*Prepare the parameters for displaying Bus Partner details
   SET PARAMETER ID 'BPO' FIELD 'UDM000'.
   SET PARAMETER ID 'BPOG' FIELD 'UDM000'.
   swc_create_object handle 'BUS1006' l_bpartnerid.
   swc_call_method handle 'DISPLAY' container.
No confidence but Is BP Role Cat. in configuration 'Define BP Roles' should be 'UDM000' ???

Item 000010 does not exist Message no. V1331

Similar Messages

Maybe you are looking for