Item status of SC of subtype ER not updated after creating BDI invitation

Dear Experts,
Our process is that we push a PR from ECC that creates a SC of subtype ER in SRM.
In a Z program we based on some criterion we consolidate the line items of these SCs and create BID invitation for these.
After BID invitation is created for the SCs what should be the status of these SCs in BBP_PD?
In our system it is showing
HEADER          I1021              Created
HEADER          I1038              Completed
HEADER          I1106              Shopping Cart Ordered
HEADER          I1129              Approved
0000000001    I111                Item in transfer process             X
For ITEM the status is not updated to I1113 follow on documents created.
In the Z program we check if the SC Item has status I1113, if yes it means it is already processed for BID else process it for BID now. Since the SC item status is not updated properly same SCs are getting processed again .
How can we update the ITEM status for a SC of subtype ER after a BID invitation for the SC is created?
Thanks,
Anubhav

Hi Jay,
Forgot to mention we are on SRM4.0 .
I solved the issue by calling FM BBP_PD_SC_STATUS_CHANGE_DIRECT(passing item guid and status) and BBP_PDH_DIRECT_UPDATE (passing shopping cart guid) in sequence .
Now the item level status is updated correctly.
Thanks a lot,
Anubhav

Similar Messages

  • Excise base amount not updated after creating Excise Invoice

    Dear Friends,
    The excise base amount is not getting updated in table J_1IEXCDTL u2013 EXBAS. System updates J_1IEXCDTL u2013 EXBAS, if condition category in the Base price condition type is maintained as H.But the problem comes when discounts are applicable.
    Say, the base price is Rs 10000 and there is a discount of Rs1000. If I maintain the condition category u2018Hu2019, the excise base value is getting updated as Rs10000, but it should be Rs 9000. But there is no problem with the BED/EDCess/SHEd cess which are calculated as expected based on the steps defined in the pricing procedure.
    I even tried using condition type JASS (Acc Seq JDUM -100% on the (Base price - Discount value and condition category H).It works only when JASS is set as Non-statistical.By doing so,Base price and also the Discounts conditions are getting inactive. When JASS is set as statistical, EXBAS is not getting updated.
    Thanks
    ISaac

    Hi  Issac,
    Use the below user exit to populate the excise base value.
    J_1I7_USEREXIT_CALC_EXC_BASE.
    This user exit has the KONV strcuture of your billing, you can derevive
    the base value and pass it to the parameter EXCITM_BASE so that the exci
    se base can be updated during billing.
    Thanks and Regards
    MBS

  • PO item change is not updated after Delivery completion

    Dear All,
    PO item change is not updated in the PO at the completion of the delivery.for a particular line item. In our QA system, its updated but client is facing an issue with the production system. Pls check the attached screen which I got from QA. There is no such log in the production system. Kindly help me to have a solution for this.
    Regards
    Sujith

    Hi Dev,
    After we post the GR for a PO line item, PO history is updated (line) and at the same time that particular change log is available under PO line item. But in production system, said log is not updated after GR is completed fully.
    Rgs
    Sujith

  • Node.length not updating after removeInstance

    I have a dynamic form where line items can be added dynamically. I also have a button to remove the last line item. The code worked fine until Acrobat 7.0.7 now I get an error that the index in the removeInstance method is invalid. After doing some debugging it appears that the node.length is not updating after a removal of an instance.
    For example, the form starts with 1 line item. (node.length = 2, index = 0)
    I can successfully add a new line item (node.length = 3, index = 1)
    I then can add another line item (node.length = 4, index = 2)
    I can successfully delete the last line item (index = 2) using the following code:
    var nodelength = form1.items.nodes.length;
    //need to know which instance is being removed
    if(nodelength>2){
    items.item.instanceManager.removeInstance(nodelength-2);
    else if(nodelength==2){
    form1.items.items.Status.rawValue = "";
    form1.items.items.guestName.rawValue = "";
    form1.items.items.Payment.rawValue = "";
    form1.items.items.Entree.rawValue = "";
    At this point the items.node.length property should be 3 but it remains 4 thus causing an error when running the above script again because there is no corresponding item to remove.
    This appears to be a bug - but if I am doing something wrong please let me know. If it is a bug, please fix it.

    This sounds like a bug I recently encountered. If it's the same thing then calling xfa.form.remerge() after the removeInstance() should correct the problem. If it is the same issue, it's already been logged in order to get it fixed.
    Chris
    Adobe Enterprise Developer Support

  • Database history growth not updating after EHP upgrade

    Hi All,
    We are using SAP ECC 6.0 (731 - SP09 )  & DB2 Fix pack 5 version.Database history growth not updating after EHP upgrade. I have check  collector job running fin and DB tab > Configuration > Data Collection Framework > Configuration Collector are in green status.
    Please help me to resolve this issue.
    Regards,
    MK

    Hi MK,
    You can try few things:
    1. Check to collector standard job like SAP_COLLECTOR_FOR_PERFMONITOR should be running succesfully.
    2.If you can check to data collector collection interval column , you will find it to be Not Schedule.
    Try with Repair all collector.
    To make it work properly you have to perform
    Data Collection Full
    Data Collection Incremental
    Hope it helps
    BR Vaibhav

  • HT1338 Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

    Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

    Sorry for being unclear.
    When I am using the update in the App Store App, there will be a list of various applications that have updates to be installed (Final Cut Pro will be in this list).  I will already be logged in with the Apple ID I use for everything (my dev account).  I will be able to update all of the other various applications needing updating except for my Final Cut Pro.  When I click the update button next to the FCP update, it will give me an error saying  "This download is not available for this apple ID either because it was bought by a different user or the item was refunded or cancelled"
    I have not had any applications refunded or cancelled and this has only happened since my update to Yosemite.  FCP was working fine until the upgrade.  Is there anything that can be done to fix this?

  • Recent files list is not updating after 10.1.13

    Recent files list is not updating after 10.1.13 update unless I open the file via the Network in Windows Explorer.   If I open a file by accessing the file via a drive listed under Computer, the recent files list does not update.  The recent files list updates only if I open the file from the same drive listed under Network.

    Hi Bert ,
    You might want to report for a possible bug.Please refer to the following link for the same.
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&loc=en
    Regards
    Sukrit Dhingra

  • Picked Quantity is not updated After delivery in Vl03n

    After delivey in Order (VA03), the picked quantity is not updated Properly(VL03n). It is coming as Zero.
    Is it any configurations needed or writng any code.
    For that I put Break point in FMs like SD_DELIVERY_UPDATE_PICKING in program RVADEK01.
    But it is not stopping the Program.
    Please give any possible solution.

    Hi Vinod,
    Thank u For ur Answer.
    Just my Fuctional Consultant given Procedure.
    How to test the picking list. The problem is after Deliver  the Order quantity in VA03 and after saving, this will creates One Out Bound delivery.
    Now We r checking VL03n. Now it is updating the Picked Quantity Correctly, For that We r using the Standard Print program: RVADEK01, Form: RVPICSKSIN.
    Output Type: EK00, Application: V4.
    Here My problem is We copied the Form and print Program and modified according to our requirement and they configured in Nace with our own Output type.  We haven't chenged the updated Functionality and Not even Standard program. We wrote some include program for getting new values in scripts.
    Now the picked quantity is not updated after picking in VL03n.

  • Thumbnails not updating after external editing.

    I noticed the thumbnails are not updating after I use an external editor. When I bring the images full screen are they are representing correctly, but when I leave full screen the thumbnail still is not the latest image.
    I tried the update preview and Aperture said it they are updated, so I did an option and update preview and that corrected them, but this should be happening automatically.
    I did try restarting Aperture before the doing the "option - update preview" and that had no effect.

    Do you mean it is suppose to be fixed in 3.0.1? Or do I have to wait until a 3.1 comes out.
    I am using 3.0.1 now and that is where I am seeing the issue.

  • Ipad mini apps not updating after ios8.2 update

    apps not updating after software update ios8.2 on ipaD MINI WITH RETINA SCREEN

    Turn off any auto-update, if it is on, then tap any of the "circle icons" showing that a download is in progress, in order to stop the download. Then go to the Settings and reset the Network Settings. After the iPad starts back up, then check to make sure no apps are currently in progress of downloading. If any are, stop them again, and reset the network settings again. When it starts up again, none should be in the process of downloading. Then from that point forward, only download manually and never more than two at a time. If it is more than 100 MB, then do only one at a time. If any gets stuck at that point, then stop the download and reset the Network settings.
    That should take care of you for now. We'll see what another update brings ... IOS 8.2 (which might be the next one).

  • [svn:fx-i11] 5489: i11 branch: Fix SDK-20148 Group bounds do not update after moving a child UIComponent

    Revision: 5489
    Author: [email protected]
    Date: 2009-03-23 10:04:25 -0700 (Mon, 23 Mar 2009)
    Log Message:
    i11 branch: Fix SDK-20148 Group bounds do not update after moving a child UIComponent
    Fix: add a method in GroupBase that's called whenever child x,y changes in UIComponent. GroupBase invalidates layout when autoLayout is true.
    QE Notes: None
    Doc Notes: None
    Bugs: SDK-20148
    Reviewer: Deepa
    tests: checkintests, mustella
    Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-20148
    http://bugs.adobe.com/jira/browse/SDK-20148
    Modified Paths:
    flex/sdk/branches/i11/frameworks/projects/flex4/src/mx/components/baseClasses/GroupBase.a s
    flex/sdk/branches/i11/frameworks/projects/framework/src/mx/core/UIComponent.as

    FYI - This regression has been filed here: http://bugs.adobe.com/jira/browse/SDK-31989

  • Regisrty keys HKEY_CLASSES_ROOT\Photoshop.Application\CLSID and \CurVer are not updated after upgrading to cc 2014

    Regisrty keys HKEY_CLASSES_ROOT\Photoshop.Application\CLSID and \CurVer are not updated after upgrading to cc 2014
    this cause to "cant create ActiveX object" error in VB Scripts
    win7 x64, ps cc 2014 x64
    any ideas? thnks

    All I can so is show you what I see in that area of my Windows 7 registry but I have CS2, CS6 32, CS6 64,  CC 32, CC 64 and CC 2014 64 installed. 6 versions yet there seem to be 9 Photoshop Application dot keys.
    Windows Registry Editor Version 5.00
    [HKEY_CLASSES_ROOT\Photoshop.Application]
    @="Photoshop Application"
    [HKEY_CLASSES_ROOT\Photoshop.Application\CLSID]
    @="{702fe898-3f8a-483f-8ca6-3bad95fa2489}"
    [HKEY_CLASSES_ROOT\Photoshop.Application\CurVer]
    @="Photoshop.Application.80"
    [HKEY_CLASSES_ROOT\Photoshop.Application.60]
    @="Photoshop Application"
    [HKEY_CLASSES_ROOT\Photoshop.Application.60\CLSID]
    @="{99aea70e-4d13-44bf-a878-33345cbfcbc8}"
    [HKEY_CLASSES_ROOT\Photoshop.Application.60.1]
    @="Photoshop CS6 Application"
    [HKEY_CLASSES_ROOT\Photoshop.Application.60.1\CLSID]
    @="{6DECC242-87EF-11cf-86B4-444553540000}"
    [HKEY_CLASSES_ROOT\Photoshop.Application.70]
    @="Photoshop Application"
    [HKEY_CLASSES_ROOT\Photoshop.Application.70\CLSID]
    @="{951ec38c-3de6-4bb8-8246-adf182e6421d}"
    [HKEY_CLASSES_ROOT\Photoshop.Application.70.1]
    @="Photoshop CC Application"
    [HKEY_CLASSES_ROOT\Photoshop.Application.70.1\CLSID]
    @="{6DECC242-87EF-11cf-86B4-444553540000}"
    [HKEY_CLASSES_ROOT\Photoshop.Application.80]
    @="Photoshop Application"
    [HKEY_CLASSES_ROOT\Photoshop.Application.80\CLSID]
    @="{702fe898-3f8a-483f-8ca6-3bad95fa2489}"
    [HKEY_CLASSES_ROOT\Photoshop.Application.80.1]
    @="Photoshop CC 2014 Application"
    [HKEY_CLASSES_ROOT\Photoshop.Application.80.1\CLSID]
    @="{6DECC242-87EF-11cf-86B4-444553540000}"
    [HKEY_CLASSES_ROOT\Photoshop.Application.9]
    @="Photoshop CS2 Application"
    [HKEY_CLASSES_ROOT\Photoshop.Application.9\CLSID]
    @="{16aa0b9e-79ac-43b5-86ca-ab961fbeed5f}"
    [HKEY_CLASSES_ROOT\Photoshop.Application.9.1]
    @="Photoshop CS2 Application"
    [HKEY_CLASSES_ROOT\Photoshop.Application.9.1\CLSID]
    @="{6DECC242-87EF-11cf-86B4-444553540000}"

  • Infostructure S502 not updated after certain date

    There is an infostructure S502. It is not updated after a certain date.
    It should be updated after saving in C011N.
    This problem seems to have propped up after upgrade to ECC 6.0. Before that it was working fine.

    I have tried a lot but still S502 is not properly updated. Basically the field for date i.e SPTAG is empty. Due to this when we try to select from MCRQ based on dates, no data is selected.
    Is it because of some setting in MC23?

  • Average Active Sessions graph not updated after restart

    Hi,
    I just wanted to ask - I have restarted a database (11.1.0.7) with GC 11.1.0.1 but after the restart of the db the graphs on a performance tab are not updated. It means that the doesn't refresh and doesn't show actual data...
    I checked jobs on the target database and GC repository but nothing is broken. Info on Home tab of the target DB is actual but not the graphs..
    I also tried to clearstate and restart the agent but no change..
    Any idea?
    Thanks

    This is a bug and can be solved by applying
    Patch 10307099: PERFORMANCE CHARTS DO NOT UPDATE AFTER DATABASE IS RESTARTED
    This patch is included in the july 2011 PSU: Grid Control Patch Set Update 11.1.0.1.4 for the Oracle Management Service, see MOS doc ID 1334286.1
    Eric

  • Why do Apps not update after installing iOS6?  They just hang there!

    WHy do apps not update after installing iOS6?

    Each time? every day? Just plain crazy! Updates happen automatically on your mac....why not the same thing on ipad/iphone?
    If the app was purchased on my phone with my account, surely they do not need to "verify" my credentials each time. If my phone was stolen and someone purchased a $20 app surely my $300 phone is more important?
    They need to come up with e better solution...when we all have hundred or thousands of apps on our devices what then?

Maybe you are looking for

  • How Do I Back Up and Older Time Machine?

    I just got a new 3 Gig HD because I ran out of room with my old Time Machine HD. I realize that I have not only my "current" Time Machine back-up but I have an older one on a third HD ... besides four other HD's. Do I just have the new HD back-up EVE

  • Error while creating PDF using asynchronous

    Hi, I was using Asynchronous call to generate PDF. It was working for some time. Now it is showing error. We are not able to able to create PDF reports at that time. When we are checking the exception log of the CF Server, we can find the following e

  • Aperture 3 will not open in 64 bit mode

    Currently running Aperture 3.0.2 (fresh install of trial version with serial number purchased online) on the latest update of Snow Leopard (2.5 GHz MBP). Today, for no apparent reason, I was unable to open Aperture in it's native 64 bit mode. I immed

  • '.class' expected

    import java.lang.String; class StringDemo public static void main(String args[])   //create 3 strings   String s1="This is Dog";   String s2= new String(" I LIke It");     char arr[]={"l","a","k","s","h","m","i"};     String s3= new String(arr[]);   

  • RoboHelp permissions

    Hi everyone, Our company has a very strict policy in terms of employees' permissions on their workstations. Unfortunatelly it appears users needs local admin rights not only to install but to run RoboHelp 6.0. I contacted the Adobe support and here i