IWeb crashed - all 'disappeared' and would not load.
iWeb crashed - everything 'disappeared' and would not load. I purchased 09, and have the files for the original iWeb site (which is still active) because I published them to a domain. What is the best/easiest way for me to put all the pages back into iWeb on my laptop so that I can update them. Because iWeb is so easy and I'm stumped when anything starts HTML-ing me!
What is the best/easiest way for me to put all the pages back into iWeb on my laptop so that I can update them
There is no best or easy way to get webpages back into iWeb because you cannot import webpages.
Copy/paste the text and objects from your existing pages is the only way.
But just to be sure, check the domain file in this folder:
~/Library/Application Support/iWeb/
(where ~ is our Home directory) and see if it still there. Double click the file to open it in iWeb.
If it fails, then you're out of luck.
Similar Messages
-
When I turn on my computer the wheel just keeps turning and would not load thesoftwear
when I turn on my computer the wheel just keep turning
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
- Originally posted by Kappy (https://discussions.apple.com/thread/4519948?start=0&tstart=0) -
Despite my best efforts, I am unable to remove iTunes 11.1.4 from my PC, this being made necessary because the original installation had a flaw and did not load properly. Effor to use the control panel, deleting dll. files, etc. all failed. And, of course, on startup, a window opens with the error and tells me find QTMovie.dll and delete it because this may be the source of the hangup. Also, in trying to delete iTunes, I get the additional message that I must get approval from the System Administrator to take this action. I am the System Administrator.
Any ideas would be welcomed.
Thank you.
James
<E-mail Edited by Host>Thank you for asking this question. I'm having the same issues.
Liz -
Since updating to iOS 7 iTunes crashes and will not load on my 4s
Since updating to iOS 7 iTunes crashes and will not load on my 4s
I tried resetting to factory and that worked for a couple of hour then I ended up with iTunes crashing again. So I logged out and logged back in and so far so good. This has kept me working for 3 days now so I won't guarantee a fix but it seems to have worked.
Go to Settings->iTunes & App Store click on your login email and select logout. I closed all of my open apps at this time and restarted my phone which was probably an overabundance of caution, but I wanted to ensure any temporary files were gone. Log back in and hopefully all will work for you.
Good luck. -
I am not able to download all the album I bought from itune store. The album contains 13 songs but 4 of them would not load up into my ipod. An error code will pop up notified me that "my Ipod cannot convert some of the file" How can I fix that?
Hi there mayway3000,
You may find the troubleshooting steps in the article below helpful.
iPod does not play content purchased from the iTunes Store
http://support.apple.com/kb/TS1510
-Griff W. -
I have just installed iPhoto 11 and all of photos on my iphone have now all disappeared and ended up in my photo stream and the library in iphoto does not display all my pictures?? Can anyone help?
And I cant work out why all of my pictures are not diplaying in iphoto?
Is this iPhoto on your Mac? Are you referring to the photos that were in your iPhoto LIbrary prior to the upgrade to iPhoto 11? If so then apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
If that's not what you're referring to then you should describe what is happening in more detail. Remember we can't see your Mac or your iPhone so need detailed and accurate descriptions of what you're experiencing.
Also we need infomartion like do you have an iCloud account and are you logged into it on all of your devices, iPhoto and Mac? do you have Photo Stream enabled on both.
OT -
I downloaded the latest iOS7 to my iPad and then the screen went blank and would not respond. I have tried pressing the two buttons together and briefly get the Apple logo but still can not restart, the logo disappears. I have tried connecting to my iMac to restore the iPad but the device does not show up (I have an old iMac). What else can I do?
You need to be running Snow Leopard 10.6.8 at the very least in order to sync your iPad with iTunes so you could update your Mac, if it can be updated, and if you care to do so.
If that's not an option, you will have to find someone that can restore the device for you with their computer running iTunes or make an appointment at an Apple Store and ask them to restore the device for you.
I hope that you have an iCloud backup, because you will lose everything on the device when it is restored.
Snow Leopard can still be purchased in the U.S. Apple Online Store.
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Also, I would not give up on the reset technique....holding down on the sleep and home buttons at the same time until the Apple logo appears. It takes about 10-15 seconds and sometimes just a little longer to get the logo to appear. -
I have an Apple MacBook Pro 1,1 Mac OS X 10.6.8. I have tried to load Native Instruments Guitar Rig 4LE.
It would not load and said the following. System extension cannot be used.
The system extension "/system/library/Extensions/AppleUSBthernetHost.text" was installed improperly and cannot be used.
Please try reinstalling it, or contact the product vendor for an update.
I do not have a copy of the OS X 10.6.8 software. It is second hand so I have no product vendor to contact.
What can I do?You recently updated iTunes to v.11.4? This message has popped up on many a Mac screen when this version was first made available, because this kext was obviously faulty.
You should try to download iTunes 11.4 again from Apple's website: the new version bears the same name, but this kernel extension has been updated, and the issues it was causing are now a thing of the past.
Should solve your problem, too... -
My sister has given me an old iPod touch 2 I think it is and after resetting the account info to mine the content was wiped and can not load any games now as it runs 3.1.3 and there all saying they need iOS 5 how can I update it to this
I suspect you have the original, 1G iPod touch. Those can only go as high as iOS 3.1.3,
If y ohave a 2G those can go as high as 4.2.1
Identifying iPod models
To update
The Settings>General>Software Update comes with iOS 5 and later.
Connect the iPod to your computer and update via iTunes as far as your iPod model allows
iOS: How to update your iPhone, iPad, or iPod touch
A 2G to 4.2.1. Requires iTunes version 10.X. If a Mac it requires OSX 10.5.8 or later.
To more easily find compatible apps:
iOSSearch - search the iTunes store for compatible apps.
Vintapps 3.1.3 - paid app.
Apple Club - filter apps by iOS version. -
My iPhoto has crashed and will not load up my picture and iTunes can not find my photos. Why?
My iPhoto has creashed and will not load up my pictures and iTunes can not find my picture either. Why?
Tell us more please - so it is hard to guess what might have happened.
What is your iPhoto version and your MacOS X version?
What happened directly, before you could no longer open your iPhoto library?
Did you install or upgrade software?
Did you import new photos to your iPhoto library?
Are other programs also behaving buggie?
Did you move your iPhoto library to a new harddisk?
Did you run other programs, that might have changes the iPhoto library?
How full is your harddrisk? Could it be, that you are running out of disk space?
Anything at all, that could give us a clue ...
-- Léonie -
when i went to oxygen network, i tried to watch an episode of a show but it would not load and they play button is ineffective, what should i do?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- If you can redownload it by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
The delete and redownload -
My messages on OS mountain lion are apperaring all blank and its not allowing me to send any Imessages, it will let me type it and as soon as i hit enter it disappears somewhere. I have updated my software and this hasn't helped! Thanks
what a long post....Apple, btw, does not read this stuff, so ranting, raving, and complaining here might make you feel good, but it does no good at all. That being said, I, too have a Mac Pro Quad Core Xeon with 6 gigs of ram and an nVidia 8800 GT graphics card (not as good as yours, alas) and I've had no problems at all with it. Yes, it doesn't have Thunderbolt, but maybe we Mac pro owners will get lucky and someone will come out with an adapter (probably not). No, you probably don't have to throw away your Mac Pro, but if you do, I'll take it, for a small "recycling" fee >:-) That was a joke. Yes, the Mac Pro's future isn't quite clear, YET. Hopefully that will improve very soon. As for not being able to upgrade to Mountain Lion. Don't worry about that too much, Nobody is forcing you to do that. Your Mac Pro won't quit working if it isn't installed. From what I've heard, you should give the new OS a chance, and wait to get it, in case there might be some bugs, or stuff not working with the new OS, which has been known to happen. Yes, we Mac Pro owners don't like being treated like mushrooms-kept in the dark, and being fed......... but Apple is Apple and it will do what it does, and there is nothing you or me can really do to change that. All I can say is....trust, have faith, be patient, go for a walk, do something else to take your mind off of this problem. IF apple decides to drop the Mac Pro for good, and that's a big "IF", I think they will anger a whole bunch of people
which isn't good. However, that hasn't happened...YET. Let us hope that it doesn't
John B -
CR files will no longer show in bridge and will not load into PS
Hi I had a problem with bridge CS6 dynamic link failing and had tech support finally help with the problem by phone They had me reinstall PSCS6 and Bridge among other things like setting the permissions differenty. It worked ok when I opened it again after those changes and then I closed the apps and opened them again the next day (today) but now the CR files will show no thumbnails nor previews in bridge and will not load into PSCS6.
I get now the following error messages
These are files that are on my system and not from a camera plugged into the computer. They had worked just fine before the reinstall and permisisons changes the tech had me do. They open in the preview app and look fine so I know they are not corrupted files and I have tried different saved versions of the same (or any other CR file) and none of them will now open and Camera raw itself seems no where to be found. My prefences in camera raw have not clanged. Any ideas??? thanks and aloha, UP
I tried image processor in bridge to make them PS files and got the following error message.
I tried to load one of the CR files from the finder dirretly and got the following error message.
Any help would be appreciated. If the post goes inanswered I will call tech support again. aloha UPHI, I managed to fix the trouble by reinsatalling once again and running updates BEFORE opening bridge. It seemed that if I ran the update AFTER opening bridge I would get either an up to date status when checking for updates or I would get an install failure notice on all 4 updates that were trying to install. The updates were for camera raw, bridge and PS. I can't explain why but that helped a little. I also changed permissions on my whole user accnt to include read/write for all users. I can't say if this helped or not. I also had to go into my camera B/U files on a sepate HD and replace some of the CR folders I was using o nthe desktop. Still the CR files would not show a thumb nor a preview till I then went to each individual file inside that folder and purged the cashe for that file so it could repopulate the cashe yet again. This has been the strangest few days in PSCS6 history! Well my personal history. I will report back here if more quirks emerge. I would prefer quarks though....aloha, U
-
Question
I was on an online course website, logged in and working on an assignment. Suddenly the page disappeared and was not on the tabs either. I went to the home page and tried to log back in and it said I was already logged in on another browser window and if I proceeded to log in again the assignment I was working on would be ended and I would receive a zero. I can't locate the browser window that I was signed in on. Help...I don't want to get a zero, but don't know how to get back into the website under my original log in & get back to my half completed assignment.Hi,
Please try this: In Firefox '''History''' ('''Alt''' + '''S''') and check if it is listed in either '''Recently Closed Tabs''' or '''Recently Closed Windows''' or in the list below. If you cannot find it click '''Show All History''', on the left of the window click '''Today''' below '''History''' and on the right look for the site entry corresponding closely to the time when you lost it. If you cannot see the column heading named '''Visit Date''', you may have to enable it by right-clicking on the column header strip.
Also please note that the online course site may have redirected you to another site for the test, so it is also a good idea to look into site entries that may match the time. -
Non-native printer driver would not load
Hi,
I have a PowerPC G4 and two printers, an Epson Photo R220 and an Epson C60. The OS is 10.4.8. Several days ago I reset my printing (using the printer setup utility) and then tried to reload the Epson drivers. The drivers from Epson would not load. The only drivers that do load are the ones that apparently come with the OS and are labeled with ' ... Gimp-print v5.0.0-beta2'. These drivers do not produce the same quality of printing as the Epson drivers I had before.
Downloading the most recent driver from Epson did not help, neither did any order of resetting the printer utility, re-installing, and rebooting the computer.
The gang at the local Apple Store could not solve the problem either!
Any suggestions?Thanks for your reply.
What I came to was that I needed to uninstall the direct usb driver set up I had made for my printer and then start from scratch. While I was doing this (which turned out to be very difficult) with an HP tech he mentioned an HP wireless printer that he thought would work much better for what I wanted.
So I exchanged the HP officejet Pro 5400 for a DeskJet 6980 and this is a great solution, because I don't even have to connect through the Airport with a USB cable. It's all wireless and the quality of the printer is good and price is reasonable. Set up was difficult but HP has good tech support even for mac and they helped me out.
Now if any in my office wants to add this printer it's available as a bonjour printer and they don't even have to load to drivers.
Maybe you are looking for
-
How can i put music drive AND a time machine drive on wireless network?
Right now I have a MacBook with ONE external drive with my music and movies- and ANOTHERexternal drive for my backups. I would LOVE to figure out how to hook both the music drive and the time machine drive to a wireless router so the only plug I have
-
SubVi with feedback nodes used more than once inside a While Loop
All, I have a subvi that does a set of operations and uses 3 feedback nodes. I am using this subvi inside a While Loop a total of 4 times. I've noticed that all instances used share the same result at each corresponding feedback node but I would like
-
REP-300 Error while running report using App Server
Hi, I am currently trying to run a report using the Application Server. This report is being called from a form. I am able to connect to the report server and all configurations seems to be correct. But when I execute the report from the form, I am g
-
Sales Pricing Procedure : Statistical Condition type and Reqt.
Hi, I wish to know what else is the use of marking the condition type statistical except the ones i know. (a) now included in the final price. but will be seen in the condtions (b) Can be used to send that value to a particular account. What is the u
-
Hello. I have recently got an mp3 player. I got an SD card for it. I put the sd card into my computer. It makes the sound saying that I put it in. I don't know how to put stuff on it or get into it. Please help!!! This question was solved. View Solut