LabVIEWIOControl not always passed into VI.
Hi all,
I'm using a FileGlobal in TestStand to keep an array of LabVIEWIOControls of all the comports I am accessing in my serial application. I pass the variable into one particular VI (Communication.vi) several times throughout my test sequence, but some of the time the VISA resource name is not passed in and an "_unnamedTask< (0)" appears in the VI for the VISA resource name control on the front panel instead of the comport name (i.e. "COM1").
Of course the VI errors if it does not have a VISA reference and it reports
"VISA: (Hex 0xBFFF000E) The given session or object reference is invalid
-1073807346; User-defined error code."
However, in debug mode, when the front panel displays and the VISA resource reference is unnamed I can select the appropriate comport in the drop down and the VI works.
I'm monitoring the FileGlobal in the step settings window in TestStand, and it has the proper value, and the variable is wired to the VI and passed in through the connector pane. Why is it losing the comport value some of the time? Seems like it works for the first few VI's, (it usually trips on the second or third instance of the VI, but not always) but once the value stops getting passed, it is stuck that way until I terminate the sequence.
The test sequence is not new, but this error is new and on the heels of me upgrading from TestStand 3.5 to 4.1.
Thanks for hints. I can post .seq and vi's if needed.
Andrew
Solved!
Go to Solution.
Here is the sequence and the VI in use. TestStand 4.1/LabVIEW 8.6
Attachments:
E4-SYS-TC_R2E01.14b.seq 1231 KB
E4-SYS_Communication.vi 22 KB
Similar Messages
-
My external drive does not always load into FCP10.1.4
Sometimes I have to manually select the files, other times they load them selves. Why does this happen?
I inadvertently right clicked the FCPX icon in the Dock and found this, Problem solved!
All I have to do, is release the button on the list to load it ito FCPX. -
Season pass notice does not always download. It does not appear in the purchased items. I am responding to an email stating 'this week's TV show is ready for download'. Any suggestions?
Been having the same problems all week. And am got a generic, not-at-all-helpful response from my initial inquiry with support, then absolutely no response to my follow-up requests. There seem to be a fair number of people posting this problem, so not sure why we're being ignored.
Was able to eventually download the episodes manually via the 'purchased' link, but it's about 10 more steps than normal.
Also noticed that itunes isn't recognizing my purchases at all, not just season passes. If I go to a page of a show where I buy episodes individually, it doesn't show which episodes I have previously bought like it used to. -
Session state is not being passed properly to another page
Hello Gurus,
I have a multi-page application which authenticates using a simple authentication page 101. Right now I have a generic authentication scheme which always returns true (Session Verify Function= return true; I will integrate LDAP later.) It works fine. The app remembers the username from one page to the next (popup pages mainly).
My issue is that, after exporting the application and re-importing into a new workspace, the user/session state is no longer being preserved from page to page. It prompts for a login every new page that is opened (the popups). This ruins the flow and functionality of the app.
I've checked every setting (I think) and cannot find any differences between the two workspaces or apps. Any ideas why this would work in one workspace and not the other?
TIA!
Jonathan
I should also indicate that the issue seems to be specifically in calling "callmypopup" function. For some reason it isn't passing the session id properly to the popup page, where it did fine in the other workspace. function text:
function callMyPopup (sourceItem, popuppagenum, targetItem, appid, appsession) {
//opens popup pg and passes value in sourceItem to targetItem
//sourceitem=calling text box, targetItem=text box in popup page
var minlength = 3;
if (CheckLength(sourceItem, minlength))
var formVal1 = document.getElementById(sourceItem).value.toUpperCase();
var url;
url = 'f?p=' + appid + ':' + popuppagenum + ':' + appsession + '::::' + targetItem + ':' + formVal1;
w = open(url,"winLov","Scrollbars=1,resizable=1,width=800,height=600");
if (w.opener == null)
w.opener = self;
w.focus();
else {alert('Please enter at least ' + minlength + ' characters in your search.');}
Edited by: austindurant on Sep 5, 2008 7:02 AM
Edited by: austindurant on Sep 5, 2008 7:46 AMIt looks like your session id is not correctly passed to your popup page. Try using:
javascript:popUp2('f?p=&APP_ID.:1:&SESSION.:::::', 600, 700);
instead, which does the same thing. Put your parameters for the page items there if required.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
------------------------------------------------------------------- -
Filters not getting passed in MDX query while using SAP BW with OBIEE
Hello,
I've been working on OBIEE with SAP BW as back-end. I've created some reports & those are working fine when there is less amount of data. But when I try to run a report with 3 dimensions & 1 fact it throws an error saying "No more storage space available for extending an internal table". When I checked MDX query, I found that the filters that I had applied to request & also selected from prompts are not getting passed in that query. So, I tried running a simple request using a simple filter in Answers. Although this request returns results but I can't see filter conditions in query. MDX query always show crossjoin but I can't see filter conditions anywhere.
Is it the normal OBIEE behaviour OR am I doing something wrong in there? Can you please help me out with this?
Thanks,
RockyHello Sainath,
We tried those things. But it is still giving same error.
State: HY00. Code: 10058. [NQODBC][SQL_STATE:HY000][nQSError: 10058] A general error has occurred. XML/A error returned from the server: Fault code: "XMLAnalysisError.0X80000005". Fault string: "The XML for Analysis provider encountered an error: MDX result contains too many cells (more than 1 million)". (HY000)
The problem here, I think, is the filter parameters are not getting passed in the MDX query. Any idea why would that happen? Is there any setting to do so?
Thanks in advance for help.
Regards,
Rocky -
Null values passed into the servlet
Hi all,
I keep getting null values for all the params that I pass into the servlet i.e. sqltype, producttype, process, instance etc....I have attempted to print some of them out on the screen but I keep getting the 'NullPointerException' error message...can anyone tell me what it is that I have down wrong in the below code?
If I run the servlet with method calls that have hardcoded arguments in them it works but not when I pass in the params from the URL...I am absolutley puzzled!
Help!
package blotter;
import java.io.IOException;
import java.io.PrintWriter;
import java.util.Date;
import javax.servlet.ServletConfig;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import com.db.util.WriteToLogFile;
import blotter.cache.*;
Servlet to extract an object that has already been placed
in the cache by GetBondPrices servlet from the cache.
public class ExtractSecurityObject extends HttpServlet
String sqlType = "";
String productType = "";
String instance = "";
String process = "";
String asOfDate = "";
String currencyCode = "";
String curveId = "";
String results = "";
private String debug;
private PrintWriter out;
private WriteToLogFile logFile;
// called when servlet first initialised
public void init(ServletConfig config) throws ServletException
super.init(config);
// method called for each get request
public void doGet( HttpServletRequest request, HttpServletResponse response )
throws ServletException, IOException
String toWrite = " ";
// Get the object identifier from the parameters passed in
sqlType = request.getParameter("sqltype");
productType = request.getParameter("producttype").toUpperCase();
instance = request.getParameter("instance");
process = request.getParameter("process");
asOfDate = request.getParameter("asofdate");
curveId = request.getParameter("curveid");
currencyCode = request.getParameter("ccy").toUpperCase();
out.println(currencyCode);
if ( request.getParameter("debug") !=null)
debug = request.getParameter("debug");
else
debug ="";
// set the mime type to html
response.setContentType( "text/html" );
out = response.getWriter();
out.println("<HTML>");
try
// write some parameters to a log file
toWrite = toWrite + "<li>" + getServletInfo() + " at " + new Date() + " " + sqlType + " " +
productType + " " + instance + " " + process + " " + asOfDate + " " + curveId + " " +
currencyCode;
CachedObject o1 = (CachedObject)CacheManager.getCache("EB_" + currencyCode + productType + asOfDate);
if(o1 == null){
CacheSecurityObject cso = new CacheSecurityObject();
if((request.getParameter("sqltype") == null) && (request.getParameter("instance") != null)){
results = (String)cso.putSecurityinCache(null, request.getParameter("producttype"), request.getParameter("instance"), request.getParameter("process"), request.getParameter("asOfDate"), request.getParameter("curveId"), request.getParameter("currencyCode"));
//results = (String)cso.putSecurityinCache(null, "yc", "frafu", "official", "20011105", "baceod", "sek");
out.println(results);
} else {
//results = (String)cso.putSecurityinCache("bondtypes", "bond", null, "official", "20011105", "baceod", "eur");
results = (String)cso.putSecurityinCache(request.getParameter("sqltype"), request.getParameter("producttype"), null, request.getParameter("process"), request.getParameter("asOfDate"), request.getParameter("curveId"), request.getParameter("currencyCode"));
out.println(results);
else{
out.println(((String)o1.object).toString());
// general catch for all exceptions
catch(Exception exception)
out.println( "Exception: The item that you requested was not found in the cache" + "<BR>" );
toWrite = toWrite + "Exception : " + exception.getMessage() + "\n" ;
finally
// write to logfile
logFile = new WriteToLogFile();
logFile.setSourceDirName("blotter");
logFile.setQuery(request.getQueryString());
logFile.setServletPath(request.getServletPath());
if (toWrite!=null)
logFile.writeLog(getServletInfo(),toWrite);
out.println("</HTML>");
out.close();
// need the class name for log file
public String getServletInfo()
return this.getClass().getName();
}That section of the code references a cache to extract an item that has been requested by the user. If the item is not in the cache i.e. if(o1 == null) then it will call a class that generates that object and places that object into the cache. The second time the user makes the same call then they will be handed a cached copy of that object which is aimed to make the whole servlet call faster.
That section of the code works fine coz I have tested that separately. It is the reading in of the arguments that is causing the problem. -
Trackpoint in Thinkpad X121e not always working
Hi,
my Lenovo Thinkpad X121e runs with ArchLinux x86_64 and all packages updated (no testing versions). All worked fine, but since a while i have the problem, that the trackpoint sometimes does not work. This occurs randomly at startup. Sometimes it works, sometimes not. If it works, it keeps working all the time the machine is running. If it is not running, after a reboot it will most likely work. This problem seems to occur randomly at about every tenth start of the machine. I remember that the trackpoint did work without problems in the past, but some update in the last few months has killed it. I currently cannot figure out, why this happens.
I attached the dmesg and lsmod output for the working and non-working state of the trackpoint. If you need more info, please ask. I hope someone can help me :-)
Thanks.
Edit: Added also the Xorg.0.logs for working and non-working states.
dmesg with a working trackpoint:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.3.8-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.0 20120505 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Jun 5 15:20:32 CEST 2012
[ 0.000000] Command line: root=/dev/sda3 ro
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000c6efd000 (usable)
[ 0.000000] BIOS-e820: 00000000c6efd000 - 00000000c730d000 (reserved)
[ 0.000000] BIOS-e820: 00000000c730d000 - 00000000c738d000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000c738d000 - 00000000c73ed000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000c73ed000 - 00000000c7e00000 (usable)
[ 0.000000] BIOS-e820: 00000000c7e00000 - 00000000c8000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed80000 - 00000000fed81000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000011f000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: LENOVO 30515QG/30515QG, BIOS 8RET26WW (1.08 ) 06/20/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x11f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FF8000000 write-back
[ 0.000000] 3 base 0FFF90000 mask FFFFF0000 uncachable
[ 0.000000] 4 base 0FED80000 mask FFFFFF000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] TOM2: 000000011f000000 aka 4592M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xc7e00 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000c7e00000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00c7e00000 page 2M
[ 0.000000] kernel direct mapping tables up to c7e00000 @ 1fffe000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000011f000000
[ 0.000000] 0100000000 - 011f000000 page 2M
[ 0.000000] kernel direct mapping tables up to 11f000000 @ c7dfe000-c7e00000
[ 0.000000] RAMDISK: 37d69000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f00e0 00024 (v04 LENOVO)
[ 0.000000] ACPI: XSDT 00000000c73ec120 00074 (v01 LENOVO TP-8R 00000003 PTEC 00000002)
[ 0.000000] ACPI: FACP 00000000c73da000 000F4 (v04 LENOVO TP-8R 00001080 PTL 00000002)
[ 0.000000] ACPI: DSDT 00000000c73dc000 0EAF9 (v01 LENOVO TP-8R 00001000 PTEC 00001080)
[ 0.000000] ACPI: FACS 00000000c7378000 00040
[ 0.000000] ACPI: SLIC 00000000c73eb000 00176 (v01 LENOVO TP-8R 00001080 PTEC 00000001)
[ 0.000000] ACPI: HPET 00000000c73d9000 00038 (v01 LENOVO TP-8R 00001080 PTL 00000002)
[ 0.000000] ACPI: APIC 00000000c73d8000 0005E (v02 LENOVO TP-8R 00001080 PTL 00000002)
[ 0.000000] ACPI: MCFG 00000000c73d7000 0003C (v01 LENOVO TP-8R 00001080 PTL 00000002)
[ 0.000000] ACPI: UEFI 00000000c73d6000 0003E (v01 LENOVO TP-8R 00001080 PTL 00000002)
[ 0.000000] ACPI: UEFI 00000000c73d5000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: SSDT 00000000c73d4000 003DE (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 00000000c73d2000 012FA (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.000000] ACPI: UEFI 00000000c73d1000 0013E (v01 LENOVO TP-8R 00001080 PTL 00000002)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000011f000000
[ 0.000000] Initmem setup node 0 0000000000000000-000000011f000000
[ 0.000000] NODE_DATA [000000011effb000 - 000000011effffff]
[ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011ac00000-ffff88011e5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0011f000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000c6efd
[ 0.000000] 0: 0x000c73ed -> 0x000c7e00
[ 0.000000] 0: 0x00100000 -> 0x0011f000
[ 0.000000] On node 0 totalpages: 944285
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3912 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 797008 pages, LIFO batch:31
[ 0.000000] Normal zone: 1984 pages used for memmap
[ 0.000000] Normal zone: 124992 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000c6efd000 - 00000000c730d000
[ 0.000000] PM: Registered nosave memory: 00000000c730d000 - 00000000c738d000
[ 0.000000] PM: Registered nosave memory: 00000000c738d000 - 00000000c73ed000
[ 0.000000] PM: Registered nosave memory: 00000000c7e00000 - 00000000c8000000
[ 0.000000] PM: Registered nosave memory: 00000000c8000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed80000
[ 0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed81000
[ 0.000000] PM: Registered nosave memory: 00000000fed81000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c8000000 (gap: c8000000:36c00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011ec00000 s82176 r8192 d24320 u1048576
[ 0.000000] pcpu-alloc: s82176 r8192 d24320 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 925912
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sda3 ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3637724k/4702208k available (4496k kernel code, 925068k absent, 139416k reserved, 4326k data, 732k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:512 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 15204352 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1596.524 MHz processor.
[ 0.003338] Calibrating delay loop (skipped), value calculated using timer frequency.. 3194.09 BogoMIPS (lpj=5321746)
[ 0.003347] pid_max: default: 32768 minimum: 301
[ 0.003396] Security Framework initialized
[ 0.003405] AppArmor: AppArmor disabled by boot time parameter
[ 0.004113] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.007521] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.008760] Mount-cache hash table entries: 256
[ 0.009042] Initializing cgroup subsys cpuacct
[ 0.009050] Initializing cgroup subsys memory
[ 0.009069] Initializing cgroup subsys devices
[ 0.009073] Initializing cgroup subsys freezer
[ 0.009077] Initializing cgroup subsys net_cls
[ 0.009080] Initializing cgroup subsys blkio
[ 0.009143] tseg: 00c7e00000
[ 0.009147] CPU: Physical Processor ID: 0
[ 0.009150] CPU: Processor Core ID: 0
[ 0.009154] mce: CPU supports 6 MCE banks
[ 0.011336] ACPI: Core revision 20120111
[ 0.026703] ftrace: allocating 17489 entries in 69 pages
[ 0.037262] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.071189] CPU0: AMD E-350 Processor stepping 00
[ 0.073329] Performance Events: AMD PMU driver.
[ 0.073329] ... version: 0
[ 0.073329] ... bit width: 48
[ 0.073329] ... generic registers: 4
[ 0.073329] ... value mask: 0000ffffffffffff
[ 0.073329] ... max period: 00007fffffffffff
[ 0.073329] ... fixed-purpose events: 0
[ 0.073329] ... event mask: 000000000000000f
[ 0.090166] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.116773] Booting Node 0, Processors #1 Ok.
[ 0.116781] smpboot cpu 1: start_ip = 98000
[ 0.130046] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.136704] Brought up 2 CPUs
[ 0.136716] Total of 2 processors activated (6388.18 BogoMIPS).
[ 0.137266] devtmpfs: initialized
[ 0.140921] PM: Registering ACPI NVS region at c730d000 (524288 bytes)
[ 0.141584] NET: Registered protocol family 16
[ 0.141951] ACPI: bus type pci registered
[ 0.142141] PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xf8000000-0xf9ffffff] (base 0xf8000000)
[ 0.142147] PCI: not using MMCONFIG
[ 0.142150] PCI: Using configuration type 1 for base access
[ 0.142153] PCI: Using configuration type 1 for extended access
[ 0.143469] bio: create slab <bio-0> at 0
[ 0.143469] ACPI: Added _OSI(Module Device)
[ 0.143469] ACPI: Added _OSI(Processor Device)
[ 0.143469] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.143469] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.146754] ACPI: EC: Look up EC in DSDT
[ 0.157302] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.161305] ACPI: Interpreter enabled
[ 0.161305] ACPI: (supports S0 S3 S4 S5)
[ 0.161305] ACPI: Using IOAPIC for interrupt routing
[ 0.161305] PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xf8000000-0xf9ffffff] (base 0xf8000000)
[ 0.163624] PCI: MMCONFIG at [mem 0xf8000000-0xf9ffffff] reserved in ACPI motherboard resources
[ 0.169819] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.175499] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.177428] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[ 0.177818] ACPI: No dock devices found.
[ 0.177828] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.180145] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.181866] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.181872] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c1fff]
[ 0.181877] pci_root PNP0A08:00: host bridge window [mem 0x000c2000-0x000c3fff]
[ 0.181881] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c5fff]
[ 0.181885] pci_root PNP0A08:00: host bridge window [mem 0x000c6000-0x000c7fff]
[ 0.181890] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000c9fff]
[ 0.181894] pci_root PNP0A08:00: host bridge window [mem 0x000ca000-0x000cbfff]
[ 0.181898] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cdfff]
[ 0.181902] pci_root PNP0A08:00: host bridge window [mem 0x000ce000-0x000cffff]
[ 0.181906] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d1fff]
[ 0.181910] pci_root PNP0A08:00: host bridge window [mem 0x000d2000-0x000d3fff]
[ 0.181915] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d5fff]
[ 0.181919] pci_root PNP0A08:00: host bridge window [mem 0x000d6000-0x000d7fff]
[ 0.181923] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000d9fff]
[ 0.181927] pci_root PNP0A08:00: host bridge window [mem 0x000da000-0x000dbfff]
[ 0.181931] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000ddfff]
[ 0.181935] pci_root PNP0A08:00: host bridge window [mem 0x000de000-0x000dffff]
[ 0.181940] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e1fff]
[ 0.181944] pci_root PNP0A08:00: host bridge window [mem 0x000e2000-0x000e3fff]
[ 0.181948] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e5fff]
[ 0.181952] pci_root PNP0A08:00: host bridge window [mem 0x000e6000-0x000e7fff]
[ 0.181956] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000e9fff]
[ 0.181960] pci_root PNP0A08:00: host bridge window [mem 0x000ea000-0x000ebfff]
[ 0.181964] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000edfff]
[ 0.181968] pci_root PNP0A08:00: host bridge window [mem 0x000ee000-0x000effff]
[ 0.181973] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xf7ffffff]
[ 0.181977] pci_root PNP0A08:00: host bridge window [mem 0xf8000000-0xffffffff]
[ 0.181981] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.181985] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.182002] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000ce000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce3ff])
[ 0.182081] PCI host bridge to bus 0000:00
[ 0.182085] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.182090] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c1fff]
[ 0.182094] pci_bus 0000:00: root bus resource [mem 0x000c2000-0x000c3fff]
[ 0.182098] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c5fff]
[ 0.182102] pci_bus 0000:00: root bus resource [mem 0x000c6000-0x000c7fff]
[ 0.182106] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000c9fff]
[ 0.182110] pci_bus 0000:00: root bus resource [mem 0x000ca000-0x000cbfff]
[ 0.182114] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cdfff]
[ 0.182117] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d1fff]
[ 0.182121] pci_bus 0000:00: root bus resource [mem 0x000d2000-0x000d3fff]
[ 0.182125] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d5fff]
[ 0.182129] pci_bus 0000:00: root bus resource [mem 0x000d6000-0x000d7fff]
[ 0.182133] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000d9fff]
[ 0.182137] pci_bus 0000:00: root bus resource [mem 0x000da000-0x000dbfff]
[ 0.182141] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000ddfff]
[ 0.182144] pci_bus 0000:00: root bus resource [mem 0x000de000-0x000dffff]
[ 0.182148] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e1fff]
[ 0.182152] pci_bus 0000:00: root bus resource [mem 0x000e2000-0x000e3fff]
[ 0.182156] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e5fff]
[ 0.182160] pci_bus 0000:00: root bus resource [mem 0x000e6000-0x000e7fff]
[ 0.182164] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000e9fff]
[ 0.182168] pci_bus 0000:00: root bus resource [mem 0x000ea000-0x000ebfff]
[ 0.182172] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000edfff]
[ 0.182176] pci_bus 0000:00: root bus resource [mem 0x000ee000-0x000effff]
[ 0.182180] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff]
[ 0.182184] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xffffffff]
[ 0.182187] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.182191] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.182208] pci 0000:00:00.0: [1022:1510] type 0 class 0x000600
[ 0.182268] pci 0000:00:01.0: [1002:9802] type 0 class 0x000300
[ 0.182283] pci 0000:00:01.0: reg 10: [mem 0xe0000000-0xefffffff pref]
[ 0.182294] pci 0000:00:01.0: reg 14: [io 0x4000-0x40ff]
[ 0.182304] pci 0000:00:01.0: reg 18: [mem 0xf0300000-0xf033ffff]
[ 0.182367] pci 0000:00:01.0: supports D1 D2
[ 0.182392] pci 0000:00:01.1: [1002:1314] type 0 class 0x000403
[ 0.182405] pci 0000:00:01.1: reg 10: [mem 0xf0344000-0xf0347fff]
[ 0.182478] pci 0000:00:01.1: supports D1 D2
[ 0.182559] pci 0000:00:05.0: [1022:1513] type 1 class 0x000604
[ 0.182638] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.182671] pci 0000:00:06.0: [1022:1514] type 1 class 0x000604
[ 0.182749] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.182845] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[ 0.182872] pci 0000:00:11.0: reg 10: [io 0x4118-0x411f]
[ 0.182886] pci 0000:00:11.0: reg 14: [io 0x4124-0x4127]
[ 0.182900] pci 0000:00:11.0: reg 18: [io 0x4110-0x4117]
[ 0.182915] pci 0000:00:11.0: reg 1c: [io 0x4120-0x4123]
[ 0.182929] pci 0000:00:11.0: reg 20: [io 0x4100-0x410f]
[ 0.182943] pci 0000:00:11.0: reg 24: [mem 0xf034a000-0xf034a3ff]
[ 0.183027] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.183047] pci 0000:00:12.0: reg 10: [mem 0xf0349000-0xf0349fff]
[ 0.183144] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.183171] pci 0000:00:12.2: reg 10: [mem 0xf034a500-0xf034a5ff]
[ 0.183281] pci 0000:00:12.2: supports D1 D2
[ 0.183285] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.183337] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.183357] pci 0000:00:13.0: reg 10: [mem 0xf0348000-0xf0348fff]
[ 0.183455] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.183481] pci 0000:00:13.2: reg 10: [mem 0xf034a400-0xf034a4ff]
[ 0.183591] pci 0000:00:13.2: supports D1 D2
[ 0.183594] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.183629] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.183736] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.183767] pci 0000:00:14.2: reg 10: [mem 0xf0340000-0xf0343fff 64bit]
[ 0.183855] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.183879] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.183982] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.184052] pci 0000:00:18.0: [1022:1700] type 0 class 0x000600
[ 0.184102] pci 0000:00:18.1: [1022:1701] type 0 class 0x000600
[ 0.184146] pci 0000:00:18.2: [1022:1702] type 0 class 0x000600
[ 0.184192] pci 0000:00:18.3: [1022:1703] type 0 class 0x000600
[ 0.184251] pci 0000:00:18.4: [1022:1704] type 0 class 0x000600
[ 0.184295] pci 0000:00:18.5: [1022:1718] type 0 class 0x000600
[ 0.184339] pci 0000:00:18.6: [1022:1716] type 0 class 0x000600
[ 0.184383] pci 0000:00:18.7: [1022:1719] type 0 class 0x000600
[ 0.184555] pci 0000:01:00.0: [10ec:8176] type 0 class 0x000280
[ 0.184577] pci 0000:01:00.0: reg 10: [io 0x3000-0x30ff]
[ 0.184612] pci 0000:01:00.0: reg 18: [mem 0xf0200000-0xf0203fff 64bit]
[ 0.184714] pci 0000:01:00.0: supports D1 D2
[ 0.184718] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.190067] pci 0000:00:05.0: PCI bridge to [bus 01-01]
[ 0.190089] pci 0000:00:05.0: bridge window [io 0x3000-0x3fff]
[ 0.190101] pci 0000:00:05.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.190192] pci 0000:02:00.0: [1969:1083] type 0 class 0x000200
[ 0.190224] pci 0000:02:00.0: reg 10: [mem 0xf0100000-0xf013ffff 64bit]
[ 0.190239] pci 0000:02:00.0: reg 18: [io 0x2000-0x207f]
[ 0.190356] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.196733] pci 0000:00:06.0: PCI bridge to [bus 02-02]
[ 0.196755] pci 0000:00:06.0: bridge window [io 0x2000-0x2fff]
[ 0.196767] pci 0000:00:06.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.196860] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.196875] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.196881] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c1fff] (subtractive decode)
[ 0.196885] pci 0000:00:14.4: bridge window [mem 0x000c2000-0x000c3fff] (subtractive decode)
[ 0.196890] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c5fff] (subtractive decode)
[ 0.196894] pci 0000:00:14.4: bridge window [mem 0x000c6000-0x000c7fff] (subtractive decode)
[ 0.196899] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000c9fff] (subtractive decode)
[ 0.196903] pci 0000:00:14.4: bridge window [mem 0x000ca000-0x000cbfff] (subtractive decode)
[ 0.196921] pci 0000:00:14.4: bridge window [mem 0x000cc000-0x000cdfff] (subtractive decode)
[ 0.196925] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d1fff] (subtractive decode)
[ 0.196930] pci 0000:00:14.4: bridge window [mem 0x000d2000-0x000d3fff] (subtractive decode)
[ 0.196935] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d5fff] (subtractive decode)
[ 0.196939] pci 0000:00:14.4: bridge window [mem 0x000d6000-0x000d7fff] (subtractive decode)
[ 0.196944] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000d9fff] (subtractive decode)
[ 0.196948] pci 0000:00:14.4: bridge window [mem 0x000da000-0x000dbfff] (subtractive decode)
[ 0.196953] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000ddfff] (subtractive decode)
[ 0.196957] pci 0000:00:14.4: bridge window [mem 0x000de000-0x000dffff] (subtractive decode)
[ 0.196962] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e1fff] (subtractive decode)
[ 0.196966] pci 0000:00:14.4: bridge window [mem 0x000e2000-0x000e3fff] (subtractive decode)
[ 0.196971] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e5fff] (subtractive decode)
[ 0.196975] pci 0000:00:14.4: bridge window [mem 0x000e6000-0x000e7fff] (subtractive decode)
[ 0.196980] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000e9fff] (subtractive decode)
[ 0.196984] pci 0000:00:14.4: bridge window [mem 0x000ea000-0x000ebfff] (subtractive decode)
[ 0.196989] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000edfff] (subtractive decode)
[ 0.196993] pci 0000:00:14.4: bridge window [mem 0x000ee000-0x000effff] (subtractive decode)
[ 0.196998] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xf7ffffff] (subtractive decode)
[ 0.197002] pci 0000:00:14.4: bridge window [mem 0xf8000000-0xffffffff] (subtractive decode)
[ 0.197007] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.197011] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.197091] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.197382] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
[ 0.197462] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
[ 0.197622] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.197990] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.198396] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.207341] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0
[ 0.207552] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0
[ 0.207715] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0
[ 0.207830] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0
[ 0.207926] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0
[ 0.208048] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0
[ 0.208177] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0
[ 0.208300] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0
[ 0.208426] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.208426] vgaarb: loaded
[ 0.208426] vgaarb: bridge control possible 0000:00:01.0
[ 0.208426] PCI: Using ACPI for IRQ routing
[ 0.210067] PCI: pci_cache_line_size set to 64 bytes
[ 0.210205] reserve RAM buffer: 000000000009d800 - 000000000009ffff
[ 0.210210] reserve RAM buffer: 00000000c6efd000 - 00000000c7ffffff
[ 0.210215] reserve RAM buffer: 00000000c7e00000 - 00000000c7ffffff
[ 0.210219] reserve RAM buffer: 000000011f000000 - 000000011fffffff
[ 0.210416] NetLabel: Initializing
[ 0.210420] NetLabel: domain hash size = 128
[ 0.210422] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.210446] NetLabel: unlabeled traffic allowed by default
[ 0.210504] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.210511] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.212540] Switching to clocksource hpet
[ 0.225756] pnp: PnP ACPI init
[ 0.225801] ACPI: bus type pnp registered
[ 0.226870] pnp 00:00: [bus 00-ff]
[ 0.226876] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.226881] pnp 00:00: [mem 0x000c0000-0x000c1fff window]
[ 0.226885] pnp 00:00: [mem 0x000c2000-0x000c3fff window]
[ 0.226889] pnp 00:00: [mem 0x000c4000-0x000c5fff window]
[ 0.226893] pnp 00:00: [mem 0x000c6000-0x000c7fff window]
[ 0.226897] pnp 00:00: [mem 0x000c8000-0x000c9fff window]
[ 0.226901] pnp 00:00: [mem 0x000ca000-0x000cbfff window]
[ 0.226904] pnp 00:00: [mem 0x000cc000-0x000cdfff window]
[ 0.226908] pnp 00:00: [mem 0x000ce000-0x000cffff window]
[ 0.226912] pnp 00:00: [mem 0x000d0000-0x000d1fff window]
[ 0.226920] pnp 00:00: [mem 0x000d2000-0x000d3fff window]
[ 0.226924] pnp 00:00: [mem 0x000d4000-0x000d5fff window]
[ 0.226927] pnp 00:00: [mem 0x000d6000-0x000d7fff window]
[ 0.226931] pnp 00:00: [mem 0x000d8000-0x000d9fff window]
[ 0.226935] pnp 00:00: [mem 0x000da000-0x000dbfff window]
[ 0.226938] pnp 00:00: [mem 0x000dc000-0x000ddfff window]
[ 0.226942] pnp 00:00: [mem 0x000de000-0x000dffff window]
[ 0.226946] pnp 00:00: [mem 0x000e0000-0x000e1fff window]
[ 0.226950] pnp 00:00: [mem 0x000e2000-0x000e3fff window]
[ 0.226953] pnp 00:00: [mem 0x000e4000-0x000e5fff window]
[ 0.226957] pnp 00:00: [mem 0x000e6000-0x000e7fff window]
[ 0.226961] pnp 00:00: [mem 0x000e8000-0x000e9fff window]
[ 0.226964] pnp 00:00: [mem 0x000ea000-0x000ebfff window]
[ 0.226968] pnp 00:00: [mem 0x000ec000-0x000edfff window]
[ 0.226972] pnp 00:00: [mem 0x000ee000-0x000effff window]
[ 0.226976] pnp 00:00: [mem 0xe0000000-0xf7ffffff window]
[ 0.226979] pnp 00:00: [mem 0xf8000000-0xffffffff window]
[ 0.226984] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.226987] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.226991] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.227102] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.227189] pnp 00:01: [io 0x0f50-0x0f51]
[ 0.227194] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[ 0.227198] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[ 0.227201] pnp 00:01: [mem 0xf8000000-0xf9ffffff]
[ 0.227291] system 00:01: [io 0x0f50-0x0f51] has been reserved
[ 0.227298] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.227303] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.227308] system 00:01: [mem 0xf8000000-0xf9ffffff] has been reserved
[ 0.227314] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.228056] pnp 00:02: [io 0x0000-0x001f]
[ 0.228060] pnp 00:02: [io 0x0081-0x008f]
[ 0.228063] pnp 00:02: [io 0x00c0-0x00de]
[ 0.228066] pnp 00:02: [io 0x040b]
[ 0.228069] pnp 00:02: [io 0x04d6]
[ 0.228073] pnp 00:02: [dma 4]
[ 0.228138] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.228155] pnp 00:03: [io 0x00f0-0x00fe]
[ 0.228221] pnp 00:03: [irq 13]
[ 0.228286] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.228306] pnp 00:04: [io 0x0070-0x0071]
[ 0.228361] pnp 00:04: [irq 8]
[ 0.228418] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.228434] pnp 00:05: [io 0x0061]
[ 0.228496] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.228516] pnp 00:06: [io 0x0060]
[ 0.228519] pnp 00:06: [io 0x0064]
[ 0.228528] pnp 00:06: [irq 1]
[ 0.228598] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.228686] pnp 00:07: [irq 12]
[ 0.228746] pnp 00:07: Plug and Play ACPI device, IDs LEN0026 PNP0f13 (active)
[ 0.228772] pnp 00:08: [io 0x0022-0x0023]
[ 0.228775] pnp 00:08: [io 0x002e-0x002f]
[ 0.228779] pnp 00:08: [io 0x0072-0x0073]
[ 0.228785] pnp 00:08: [io 0x0080]
[ 0.228789] pnp 00:08: [io 0x0092]
[ 0.228792] pnp 00:08: [io 0x00b0-0x00b1]
[ 0.228795] pnp 00:08: [io 0x00b2]
[ 0.228798] pnp 00:08: [io 0x00b8]
[ 0.228801] pnp 00:08: [io 0x00bc]
[ 0.228804] pnp 00:08: [io 0x00f0]
[ 0.228807] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.228810] pnp 00:08: [io 0x0530-0x0537]
[ 0.228813] pnp 00:08: [io 0x0800-0x0827]
[ 0.228817] pnp 00:08: [io 0x0830]
[ 0.228820] pnp 00:08: [io 0x0840-0x0847]
[ 0.228823] pnp 00:08: [io 0x0b00-0x0b1f]
[ 0.228826] pnp 00:08: [io 0x0b20-0x0b3f]
[ 0.228829] pnp 00:08: [io 0x0c00-0x0c01]
[ 0.228832] pnp 00:08: [io 0x0c14]
[ 0.228835] pnp 00:08: [io 0x0c50-0x0c52]
[ 0.228839] pnp 00:08: [io 0x0cd0-0x0cd1]
[ 0.228842] pnp 00:08: [io 0x0cd2-0x0cd3]
[ 0.228845] pnp 00:08: [io 0x0cd4-0x0cd5]
[ 0.228848] pnp 00:08: [io 0x0cd6-0x0cd7]
[ 0.228851] pnp 00:08: [io 0x0cd8-0x0cdf]
[ 0.228854] pnp 00:08: [io 0x0cf9]
[ 0.228858] pnp 00:08: [io 0x8100-0x81ff window]
[ 0.228862] pnp 00:08: [io 0x8200-0x82ff window]
[ 0.228977] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.228982] system 00:08: [io 0x0530-0x0537] has been reserved
[ 0.228987] system 00:08: [io 0x0800-0x0827] has been reserved
[ 0.228991] system 00:08: [io 0x0830] has been reserved
[ 0.228996] system 00:08: [io 0x0840-0x0847] has been reserved
[ 0.229000] system 00:08: [io 0x0b00-0x0b1f] has been reserved
[ 0.229005] system 00:08: [io 0x0b20-0x0b3f] has been reserved
[ 0.229009] system 00:08: [io 0x0c00-0x0c01] has been reserved
[ 0.229014] system 00:08: [io 0x0c14] has been reserved
[ 0.229018] system 00:08: [io 0x0c50-0x0c52] has been reserved
[ 0.229023] system 00:08: [io 0x0cd0-0x0cd1] has been reserved
[ 0.229027] system 00:08: [io 0x0cd2-0x0cd3] has been reserved
[ 0.229032] system 00:08: [io 0x0cd4-0x0cd5] has been reserved
[ 0.229036] system 00:08: [io 0x0cd6-0x0cd7] has been reserved
[ 0.229041] system 00:08: [io 0x0cd8-0x0cdf] has been reserved
[ 0.229045] system 00:08: [io 0x0cf9] could not be reserved
[ 0.229050] system 00:08: [io 0x8100-0x81ff window] has been reserved
[ 0.229055] system 00:08: [io 0x8200-0x82ff window] has been reserved
[ 0.229061] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.229217] pnp 00:09: [mem 0x000e0000-0x000fffff]
[ 0.229221] pnp 00:09: [mem 0xffe00000-0xffffffff]
[ 0.229225] pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.229229] pnp 00:09: [mem 0xfec10000-0xfec1001f]
[ 0.229233] pnp 00:09: [mem 0xfed00000-0xfed003ff]
[ 0.229236] pnp 00:09: [mem 0xfed61000-0xfed613ff]
[ 0.229240] pnp 00:09: [mem 0xfed80000-0xfed80fff]
[ 0.229272] pnp 00:09: [Firmware Bug]: [mem 0x00000000-0xffffffffffffffff disabled] covers only part of AMD MMCONFIG area [mem 0xf8000000-0xf9ffffff]; adding more reservations
[ 0.229345] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.229351] system 00:09: [mem 0xffe00000-0xffffffff] has been reserved
[ 0.229356] system 00:09: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.229360] system 00:09: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.229365] system 00:09: [mem 0xfed61000-0xfed613ff] has been reserved
[ 0.229370] system 00:09: [mem 0xfed80000-0xfed80fff] has been reserved
[ 0.229376] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.229807] pnp: PnP ACPI: found 10 devices
[ 0.229815] ACPI: ACPI bus type pnp unregistered
[ 0.242341] PCI: max bus depth: 1 pci_try_num: 2
[ 0.242430] pci 0000:00:05.0: PCI bridge to [bus 01-01]
[ 0.242437] pci 0000:00:05.0: bridge window [io 0x3000-0x3fff]
[ 0.242445] pci 0000:00:05.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.242455] pci 0000:00:06.0: PCI bridge to [bus 02-02]
[ 0.242461] pci 0000:00:06.0: bridge window [io 0x2000-0x2fff]
[ 0.242467] pci 0000:00:06.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.242477] pci 0000:00:14.4: PCI bridge to [bus 04-04]
[ 0.242564] pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff]
[ 0.242569] pci_bus 0000:00: resource 5 [mem 0x000c0000-0x000c1fff]
[ 0.242573] pci_bus 0000:00: resource 6 [mem 0x000c2000-0x000c3fff]
[ 0.242578] pci_bus 0000:00: resource 7 [mem 0x000c4000-0x000c5fff]
[ 0.242582] pci_bus 0000:00: resource 8 [mem 0x000c6000-0x000c7fff]
[ 0.242586] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000c9fff]
[ 0.242590] pci_bus 0000:00: resource 10 [mem 0x000ca000-0x000cbfff]
[ 0.242594] pci_bus 0000:00: resource 11 [mem 0x000cc000-0x000cdfff]
[ 0.242598] pci_bus 0000:00: resource 12 [mem 0x000d0000-0x000d1fff]
[ 0.242602] pci_bus 0000:00: resource 13 [mem 0x000d2000-0x000d3fff]
[ 0.242606] pci_bus 0000:00: resource 14 [mem 0x000d4000-0x000d5fff]
[ 0.242610] pci_bus 0000:00: resource 15 [mem 0x000d6000-0x000d7fff]
[ 0.242614] pci_bus 0000:00: resource 16 [mem 0x000d8000-0x000d9fff]
[ 0.242618] pci_bus 0000:00: resource 17 [mem 0x000da000-0x000dbfff]
[ 0.242622] pci_bus 0000:00: resource 18 [mem 0x000dc000-0x000ddfff]
[ 0.242626] pci_bus 0000:00: resource 19 [mem 0x000de000-0x000dffff]
[ 0.242629] pci_bus 0000:00: resource 20 [mem 0x000e0000-0x000e1fff]
[ 0.242633] pci_bus 0000:00: resource 21 [mem 0x000e2000-0x000e3fff]
[ 0.242637] pci_bus 0000:00: resource 22 [mem 0x000e4000-0x000e5fff]
[ 0.242641] pci_bus 0000:00: resource 23 [mem 0x000e6000-0x000e7fff]
[ 0.242645] pci_bus 0000:00: resource 24 [mem 0x000e8000-0x000e9fff]
[ 0.242649] pci_bus 0000:00: resource 25 [mem 0x000ea000-0x000ebfff]
[ 0.242653] pci_bus 0000:00: resource 26 [mem 0x000ec000-0x000edfff]
[ 0.242657] pci_bus 0000:00: resource 27 [mem 0x000ee000-0x000effff]
[ 0.242661] pci_bus 0000:00: resource 28 [mem 0xe0000000-0xf7ffffff]
[ 0.242665] pci_bus 0000:00: resource 29 [mem 0xf8000000-0xffffffff]
[ 0.242669] pci_bus 0000:00: resource 30 [io 0x0000-0x0cf7]
[ 0.242673] pci_bus 0000:00: resource 31 [io 0x0d00-0xffff]
[ 0.242677] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.242681] pci_bus 0000:01: resource 1 [mem 0xf0200000-0xf02fffff]
[ 0.242685] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.242689] pci_bus 0000:02: resource 1 [mem 0xf0100000-0xf01fffff]
[ 0.242694] pci_bus 0000:04: resource 4 [mem 0x000a0000-0x000bffff]
[ 0.242698] pci_bus 0000:04: resource 5 [mem 0x000c0000-0x000c1fff]
[ 0.242702] pci_bus 0000:04: resource 6 [mem 0x000c2000-0x000c3fff]
[ 0.242706] pci_bus 0000:04: resource 7 [mem 0x000c4000-0x000c5fff]
[ 0.242711] pci_bus 0000:04: resource 8 [mem 0x000c6000-0x000c7fff]
[ 0.242715] pci_bus 0000:04: resource 9 [mem 0x000c8000-0x000c9fff]
[ 0.242719] pci_bus 0000:04: resource 10 [mem 0x000ca000-0x000cbfff]
[ 0.242723] pci_bus 0000:04: resource 11 [mem 0x000cc000-0x000cdfff]
[ 0.242727] pci_bus 0000:04: resource 12 [mem 0x000d0000-0x000d1fff]
[ 0.242731] pci_bus 0000:04: resource 13 [mem 0x000d2000-0x000d3fff]
[ 0.242735] pci_bus 0000:04: resource 14 [mem 0x000d4000-0x000d5fff]
[ 0.242739] pci_bus 0000:04: resource 15 [mem 0x000d6000-0x000d7fff]
[ 0.242743] pci_bus 0000:04: resource 16 [mem 0x000d8000-0x000d9fff]
[ 0.242746] pci_bus 0000:04: resource 17 [mem 0x000da000-0x000dbfff]
[ 0.242750] pci_bus 0000:04: resource 18 [mem 0x000dc000-0x000ddfff]
[ 0.242755] pci_bus 0000:04: resource 19 [mem 0x000de000-0x000dffff]
[ 0.242759] pci_bus 0000:04: resource 20 [mem 0x000e0000-0x000e1fff]
[ 0.242763] pci_bus 0000:04: resource 21 [mem 0x000e2000-0x000e3fff]
[ 0.242767] pci_bus 0000:04: resource 22 [mem 0x000e4000-0x000e5fff]
[ 0.242771] pci_bus 0000:04: resource 23 [mem 0x000e6000-0x000e7fff]
[ 0.242775] pci_bus 0000:04: resource 24 [mem 0x000e8000-0x000e9fff]
[ 0.242779] pci_bus 0000:04: resource 25 [mem 0x000ea000-0x000ebfff]
[ 0.242783] pci_bus 0000:04: resource 26 [mem 0x000ec000-0x000edfff]
[ 0.242787] pci_bus 0000:04: resource 27 [mem 0x000ee000-0x000effff]
[ 0.242791] pci_bus 0000:04: resource 28 [mem 0xe0000000-0xf7ffffff]
[ 0.242795] pci_bus 0000:04: resource 29 [mem 0xf8000000-0xffffffff]
[ 0.242799] pci_bus 0000:04: resource 30 [io 0x0000-0x0cf7]
[ 0.242803] pci_bus 0000:04: resource 31 [io 0x0d00-0xffff]
[ 0.242879] NET: Registered protocol family 2
[ 0.243147] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.245284] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.250181] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.250766] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.250771] TCP reno registered
[ 0.250804] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.250858] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.251058] NET: Registered protocol family 1
[ 0.251088] pci 0000:00:01.0: Boot video device
[ 0.383864] PCI: CLS 32 bytes, default 64
[ 0.383965] Unpacking initramfs...
[ 0.478532] Freeing initrd memory: 2588k freed
[ 0.480190] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.480198] Placing 64MB software IO TLB between ffff8800c2efd000 - ffff8800c6efd000
[ 0.480203] software IO TLB at phys 0xc2efd000 - 0xc6efd000
[ 0.480963] perf: AMD IBS detected (0x000000ff)
[ 0.481379] audit: initializing netlink socket (disabled)
[ 0.481404] type=2000 audit(1339340302.479:1): initialized
[ 0.482558] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.487036] VFS: Disk quotas dquot_6.5.2
[ 0.487152] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.487326] msgmni has been set to 7109
[ 0.487931] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.488040] io scheduler noop registered
[ 0.488044] io scheduler deadline registered
[ 0.488154] io scheduler cfq registered (default)
[ 0.488395] pcieport 0000:00:05.0: irq 40 for MSI/MSI-X
[ 0.488550] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
[ 0.488682] pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt
[ 0.488687] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.488694] pcie_pme 0000:00:05.0:pcie01: service driver pcie_pme loaded
[ 0.488719] pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt
[ 0.488723] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.488729] pcie_pme 0000:00:06.0:pcie01: service driver pcie_pme loaded
[ 0.488942] GHES: HEST is not enabled!
[ 0.489246] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.490367] Linux agpgart interface v0.103
[ 0.490508] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 0.492943] i8042: Detected active multiplexing controller, rev 1.1
[ 0.496025] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.496088] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.496136] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.496180] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.496225] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.496472] mousedev: PS/2 mouse device common for all mice
[ 0.496667] rtc_cmos 00:04: RTC can wake from S4
[ 0.497028] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.497119] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.497144] cpuidle: using governor ladder
[ 0.497148] cpuidle: using governor menu
[ 0.497476] TCP cubic registered
[ 0.497700] NET: Registered protocol family 10
[ 0.498445] NET: Registered protocol family 17
[ 0.498453] Registering the dns_resolver key type
[ 0.499372] PM: Hibernation image not present or could not be loaded.
[ 0.499393] registered taskstats version 1
[ 0.500327] rtc_cmos 00:04: setting system clock to 2012-06-10 14:58:23 UTC (1339340303)
[ 0.500417] Initializing network drop monitor service
[ 0.502828] Freeing unused kernel memory: 732k freed
[ 0.503217] Write protecting the kernel read-only data: 8192k
[ 0.513112] Freeing unused kernel memory: 1628k freed
[ 0.518185] Freeing unused kernel memory: 656k freed
[ 0.536071] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.539774] udevd[37]: starting version 184
[ 0.613296] usbcore: registered new interface driver usbfs
[ 0.613442] usbcore: registered new interface driver hub
[ 0.619684] usbcore: registered new device driver usb
[ 0.620711] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.621584] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 0.621640] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 0.621702] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.621746] QUIRK: Enable AMD PLL fix
[ 0.621810] ehci_hcd 0000:00:12.2: debug port 1
[ 0.621850] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf034a500
[ 0.630117] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 0.630310] SCSI subsystem initialized
[ 0.636369] hub 1-0:1.0: USB hub found
[ 0.636381] hub 1-0:1.0: 5 ports detected
[ 0.636783] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 0.636805] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 0.636818] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.636859] ehci_hcd 0000:00:13.2: debug port 1
[ 0.636884] ehci_hcd 0000:00:13.2: irq 17, io mem 0xf034a400
[ 0.637204] libata version 3.00 loaded.
[ 0.640574] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.646781] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.647066] hub 2-0:1.0: USB hub found
[ 0.647076] hub 2-0:1.0: 5 ports detected
[ 0.647328] ahci 0000:00:11.0: version 3.0
[ 0.647600] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[ 0.647608] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 0.648432] scsi0 : ahci
[ 0.648735] ata1: SATA max UDMA/133 abar m1024@0xf034a000 port 0xf034a100 irq 19
[ 0.648890] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 0.648918] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 0.649020] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf0349000
[ 0.704676] hub 3-0:1.0: USB hub found
[ 0.704691] hub 3-0:1.0: 5 ports detected
[ 0.706337] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 0.706357] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
[ 0.706392] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf0348000
[ 0.761543] hub 4-0:1.0: USB hub found
[ 0.761558] hub 4-0:1.0: 5 ports detected
[ 1.137007] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.138642] ata1.00: ATA-8: HITACHI HTS723232A7A364, EC2ZB70B, max UDMA/100
[ 1.138651] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.140067] ata1.00: configured for UDMA/100
[ 1.140658] scsi 0:0:0:0: Direct-Access ATA HITACHI HTS72323 EC2Z PQ: 0 ANSI: 5
[ 1.144742] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.144844] sd 0:0:0:0: [sda] Write Protect is off
[ 1.144850] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.144893] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.185183] sda: sda1 sda2 sda3 sda4
[ 1.187123] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.483438] Refined TSC clocksource calibration: 1596.599 MHz.
[ 1.483459] Switching to clocksource tsc
[ 1.820777] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 4.075750] udevd[314]: starting version 185
[ 4.538235] cfg80211: Calling CRDA to update world regulatory domain
[ 4.618824] Using firmware rtlwifi/rtl8192cfw.bin
[ 4.664522] ACPI: acpi_idle registered with cpuidle
[ 4.677193] powernow-k8: Found 1 AMD E-350 Processor (2 cpu cores) (version 2.20.00)
[ 4.677322] powernow-k8: 0 : pstate 0 (1600 MHz)
[ 4.677326] powernow-k8: 1 : pstate 1 (1280 MHz)
[ 4.677329] powernow-k8: 2 : pstate 2 (800 MHz)
[ 5.014794] ACPI: AC Adapter [ACAD] (on-line)
[ 5.015426] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 5.015836] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 5.016050] ACPI: Power Button [PWRB]
[ 5.016149] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 5.016283] ACPI: Sleep Button [SLPB]
[ 5.016405] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 5.033809] ACPI: Lid Switch [LID]
[ 5.033969] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 5.034129] ACPI: Power Button [PWRF]
[ 5.047632] acpi device:34: registered as cooling_device2
[ 5.051373] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input5
[ 5.051525] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 5.076994] ACPI: Battery Slot [BAT1] (battery present)
[ 5.131780] thermal LNXTHERM:00: registered as thermal_zone0
[ 5.131788] ACPI: Thermal Zone [THZ0] (43 C)
[ 5.142726] wmi: Mapper loaded
[ 5.157792] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 5.227665] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 5.227836] SP5100 TCO timer: mmio address 0xb80830 already in use
[ 5.363443] Non-volatile memory driver v1.3
[ 5.428563] atl1c 0000:02:00.0: version 1.0.1.0-NAPI
[ 5.450972] [drm] Initialized drm 1.1.0 20060810
[ 5.527616] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 5.529303] rtlwifi: wireless switch is on
[ 5.694564] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 5.694576] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 5.694582] thinkpad_acpi: ThinkPad BIOS 8RET26WW (1.08 ), EC unknown
[ 5.694590] thinkpad_acpi: Lenovo ThinkPad X120e, model 30515QG
[ 5.697439] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 5.698186] thinkpad_acpi: radio switch found; radios are enabled
[ 5.698221] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[ 5.700698] Registered led device: tpacpi::power
[ 5.700736] Registered led device: tpacpi::standby
[ 5.700775] Registered led device: tpacpi::thinkvantage
[ 5.702194] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 5.703379] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 5.708361] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
[ 5.766552] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SMB_.SMB0 1 (20120111/utaddress-251)
[ 5.766583] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.767192] snd_hda_intel 0000:00:01.1: irq 42 for MSI/MSI-X
[ 5.780051] [drm] radeon defaulting to kernel modesetting.
[ 5.780059] [drm] radeon kernel modesetting enabled.
[ 5.817461] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 5.817754] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input8
[ 6.023285] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input9
[ 6.032362] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x17AA:0x21EC).
[ 6.033956] [drm] register mmio base: 0xF0300000
[ 6.033959] [drm] register mmio size: 262144
[ 6.034116] ATOM BIOS: Lenovo
[ 6.034164] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
[ 6.034170] radeon 0000:00:01.0: GTT: 512M 0x0000000018000000 - 0x0000000037FFFFFF
[ 6.034639] [drm] Detected VRAM RAM=384M, BAR=256M
[ 6.034646] [drm] RAM width 32bits DDR
[ 6.037931] [TTM] Zone kernel: Available graphics memory: 1821664 kiB.
[ 6.037938] [TTM] Initializing pool allocator.
[ 6.037949] [TTM] Initializing DMA pool allocator.
[ 6.038006] [drm] radeon: 384M of VRAM memory ready
[ 6.038010] [drm] radeon: 512M of GTT memory ready.
[ 6.038055] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.038059] [drm] Driver supports precise vblank timestamp query.
[ 6.038123] radeon 0000:00:01.0: irq 43 for MSI/MSI-X
[ 6.038144] radeon 0000:00:01.0: radeon: using MSI.
[ 6.038191] [drm] radeon: irq initialized.
[ 6.038201] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 6.041298] [drm] radeon: ib pool ready.
[ 6.043305] [drm] Loading PALM Microcode
[ 6.088021] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 6.088318] radeon 0000:00:01.0: WB enabled
[ 6.088330] [drm] fence driver on ring 0 use gpu addr 0x18000c00 and cpu addr 0xffff880118705c00
[ 6.110048] [drm] ring test on 0 succeeded in 1 usecs
[ 6.111109] [drm] ib test on ring 0 succeeded in 0 usecs
[ 6.111934] [drm] Radeon Display Connectors
[ 6.111938] [drm] Connector 0:
[ 6.111940] [drm] LVDS
[ 6.111943] [drm] HPD1
[ 6.111947] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 6.111950] [drm] Encoders:
[ 6.111953] [drm] LCD1: INTERNAL_UNIPHY
[ 6.111956] [drm] Connector 1:
[ 6.111958] [drm] HDMI-A
[ 6.111960] [drm] HPD2
[ 6.111964] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 6.111967] [drm] Encoders:
[ 6.111969] [drm] DFP1: INTERNAL_UNIPHY
[ 6.111971] [drm] Connector 2:
[ 6.111973] [drm] VGA
[ 6.111977] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[ 6.111980] [drm] Encoders:
[ 6.111982] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 6.112043] [drm] Internal thermal controller without fan control
[ 6.112128] [drm] radeon: power management initialized
[ 6.151134] psmouse serio4: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x121c00
[ 6.151161] psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0
[ 6.194596] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input10
[ 6.588128] [drm] fb mappable at 0xE0142000
[ 6.588135] [drm] vram apper at 0xE0000000
[ 6.588139] [drm] size 4325376
[ 6.588142] [drm] fb depth is 24
[ 6.588145] [drm] pitch is 5632
[ 6.588616] fbcon: radeondrmfb (fb0) is primary device
[ 7.109264] Console: switching to colour frame buffer device 170x48
[ 7.118245] fb0: radeondrmfb frame buffer device
[ 7.118248] drm: registered panic notifier
[ 7.118262] [drm] Initialized radeon 2.13.0 20080528 for 0000:00:01.0 on minor 0
[ 7.852228] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 7.961705] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 8.003845] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 8.011207] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 8.094702] Adding 15623208k swap on /dev/sda2. Priority:-1 extents:1 across:15623208k
[ 9.918662] atl1c 0000:02:00.0: irq 44 for MSI/MSI-X
[ 9.999979] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.082650] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 12.315710] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio4/serio5/input/input11
[ 13.383760] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 15.701075] wlan0: authenticate with 0c:60:76:4a:8c:44 (try 1)
[ 15.702630] wlan0: authenticated
[ 15.725379] wlan0: associate with 0c:60:76:4a:8c:44 (try 1)
[ 15.728291] wlan0: RX AssocResp from 0c:60:76:4a:8c:44 (capab=0x411 status=0 aid=2)
[ 15.728299] wlan0: associated
[ 15.728306] wlan0: moving STA 0c:60:76:4a:8c:44 to state 1
[ 15.728310] wlan0: moving STA 0c:60:76:4a:8c:44 to state 2
[ 15.729381] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 16.085499] EXT4-fs (sda3): re-mounted. Opts: user_xattr,acl,barrier=1,data=ordered,commit=360
[ 16.126474] Intel AES-NI instructions are not detected.
[ 16.133570] EXT4-fs (sda4): re-mounted. Opts: user_xattr,acl,barrier=1,data=ordered,commit=360
[ 16.140127] wlan0: moving STA 0c:60:76:4a:8c:44 to state 3
[ 16.184502] EXT4-fs (sda1): re-mounted. Opts: user_xattr,acl,barrier=1
[ 24.359763] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 24.565842] EXT4-fs (sda4): re-mounted. Opts: commit=0
[ 26.590021] wlan0: no IPv6 routers present
[ 42.605282] fuse init (API version 7.18)
dmesg with a non-working trackpoint:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.3.8-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.0 20120505 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Jun 5 15:20:32 CEST 2012
[ 0.000000] Command line: root=/dev/sda3 ro
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000c6efd000 (usable)
[ 0.000000] BIOS-e820: 00000000c6efd000 - 00000000c730d000 (reserved)
[ 0.000000] BIOS-e820: 00000000c730d000 - 00000000c738d000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000c738d000 - 00000000c73ed000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000c73ed000 - 00000000c7e00000 (usable)
[ 0.000000] BIOS-e820: 00000000c7e00000 - 00000000c8000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed80000 - 00000000fed81000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000011f000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: LENOVO 30515QG/30515QG, BIOS 8RET26WW (1.08 ) 06/20/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x11f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FF8000000 write-back
[ 0.000000] 3 base 0FFF90000 mask FFFFF0000 uncachable
[ 0.000000] 4 base 0FED80000 mask FFFFFF000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] TOM2: 000000011f000000 aka 4592M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xc7e00 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000c7e00000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00c7e00000 page 2M
[ 0.000000] kernel direct mapping tables up to c7e00000 @ 1fffe000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000011f000000
[ 0.000000] 0100000000 - 011f000000 page 2M
[ 0.000000] kernel direct mapping tables up to 11f000000 @ c7dfe000-c7e00000
[ 0.000000] RAMDISK: 37d69000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f00e0 00024 (v04 LENOVO)
[ 0.000000] ACPI: XSDT 00000000c73ec120 00074 (v01 LENOVO TP-8R 00000003 PTEC 00000002)
[ 0.000000] ACPI: FACP 00000000c73da000 000F4 (v04 LENOVO TP-8R 00001080 PTL 00000002)
[ 0.000000] ACPI: DSDT 00000000c73dc000 0EAF9 (v01 LENOVO TP-8R 00001000 PTEC 00001080)
[ 0.000000] ACPI: FACS 00000000c7378000 00040
[ 0.000000] ACPI: SLIC 00000000c73eb000 00176 (v01 LENOVO TP-8R 00001080 PTEC 00000001)
[ 0.000000] ACPI: HPET 00000000c73d9000 00038 (v01 LENOVO TP-8R 00001080 PTL 00000002)
[ 0.000000] ACPI: APIC 00000000c73d8000 0005E (v02 LENOVO TP-8R 00001080 PTL 00000002)
[ 0.000000] ACPI: MCFG 00000000c73d7000 0003C (v01 LENOVO TP-8R 00001080 PTL 00000002)
[ 0.000000] ACPI: UEFI 00000000c73d6000 0003E (v01 LENOVO TP-8R 00001080 PTL 00000002)
[ 0.000000] ACPI: UEFI 00000000c73d5000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: SSDT 00000000c73d4000 003DE (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 00000000c73d2000 012FA (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.000000] ACPI: UEFI 00000000c73d1000 0013E (v01 LENOVO TP-8R 00001080 PTL 00000002)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000011f000000
[ 0.000000] Initmem setup node 0 0000000000000000-000000011f000000
[ 0.000000] NODE_DATA [000000011effb000 - 000000011effffff]
[ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011ac00000-ffff88011e5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0011f000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000c6efd
[ 0.000000] 0: 0x000c73ed -> 0x000c7e00
[ 0.000000] 0: 0x00100000 -> 0x0011f000
[ 0.000000] On node 0 totalpages: 944285
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3912 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 797008 pages, LIFO batch:31
[ 0.000000] Normal zone: 1984 pages used for memmap
[ 0.000000] Normal zone: 124992 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000c6efd000 - 00000000c730d000
[ 0.000000] PM: Registered nosave memory: 00000000c730d000 - 00000000c738d000
[ 0.000000] PM: Registered nosave memory: 00000000c738d000 - 00000000c73ed000
[ 0.000000] PM: Registered nosave memory: 00000000c7e00000 - 00000000c8000000
[ 0.000000] PM: Registered nosave memory: 00000000c8000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed80000
[ 0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed81000
[ 0.000000] PM: Registered nosave memory: 00000000fed81000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c8000000 (gap: c8000000:36c00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011ec00000 s82176 r8192 d24320 u1048576
[ 0.000000] pcpu-alloc: s82176 r8192 d24320 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 925912
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sda3 ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3637724k/4702208k available (4496k kernel code, 925068k absent, 139416k reserved, 4326k data, 732k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:512 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 15204352 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgrOK, ignore my last post pointing the finger at udev.
I poked around in the kernel code; it was actually kinda fun. Now this looks more like either a hardware problem (unlikely) or a driver bug (more likely) to me:
http://ubuntuforums.org/showthread.php?t=1894892
Thought I'd pass along what I found.
During a boot, the kernel will "walk" all the buses looking for devices. The methods used to find them on some buses (like PCI) are well defined, while others are not (like the serial bus). On those buses that aren't well defined the kernel will (probably) literally "probe" the bus trying to not only find a device, but also determine the exact chip installed.
It's the second case that's involved in your problem. The serio driver found the Synaptics touchpad device (via probing). If you look closely at the kernel log, you'll see it's attached to your i8042 (PS/2) chip. But... since this touchpad device has a "passthru port", it has to perform extra steps to determine if there's a chip on the "other side" of that touchpad chip. In your case there is, and it's your Trackpoint.
If it's successful in finding the Trackpoint chip, the drivers/input/mouse/trackpoint.c kernel driver file will put the following in your syslog:
IBM TrackPoint firmware: 0x0e, buttons: 3/3
Which is what you see in your logs when it works. Since you don't see it when it fails, then the code probably isn't being executed or it's failing with an error condition.
Now... when a driver finds a device, it usually (but not always) creates some virtual "files" in the /sys directory... and that's what will happen if that trackpoint.c code is executed...
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio4/serio5/input/input11
So... one question is... "Does it create something in /sys when it fails?". From looking at the code, I highly doubt it.
Although this looks somewhat improbable, if the error path for this section of the code in the trackpoint_detect function of /drivers/input/mouse/trackpoint.c file is executed then it looks like it might match your error:
psmouse->private = kzalloc(sizeof(struct trackpoint_data), GFP_KERNEL);
if (!psmouse->private)
return -ENOMEM;
Perhaps you might want to put some sort of printk call in there to see if that's what's happening. Heck, also add one to the top of the function to see if it's even being called.
Good luck. -
I have a problem. When I start to sync music to my iPod touch, you have to enter the password of your account. I downloaded the game from the general account, and do not always know the password. He writes that if I do not login, then the game will be erased. Previously, this was not. When starting to sync music, it did not touch my programs, and now because of this music can not be transferred to iPods. PANIC AT ME! HELP
If they are Tunes purchased music you have to sing into the account that purchased them.
Is this the iTunes library/computer you sync with? You can rally only "sync" with one iTunes library/computer.However, yo can manually manage music and videos among different libraries/computer. See the manual method of:
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad -
== Issue
==
Firefox is having problems with certain web sites
== Description
==
Sometimes (but not always), when I try to open a pdf document from the US bankruptcy court website, I get a window asking if I want to use Adobe Acrobat. After I click "yes", I get a bland screen.
== URL of affected sites
==
http://
== Troubleshooting information
==
Firefox Version
3.6.3
Extensions
Name
Version
Enabled
ID
Skype extension for Firefox 2.2.0.70 false
Java Console 6.0.01 false
Java Console 6.0.02 true
== Firefox version
==
3.6.3
== Operating system
==
Windows 7
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3
== Plugins installed
==
*-Office Plugin for Netscape Navigator
*Download and Print Plug-in DLL
*Default Plug-in
*Shockwave Flash 10.0 r45
*Adobe PDF Plug-In For Firefox and NetscapeHi.
Does this only open on that specific site?
In any case, you may want to:
- instruct Firefox to handle PDF files in a specific way by going into Tools > Options > Applications and selecting the option you want for the PDF files
- reinstall Adobe Reader and its Firefox plugin
- install another reader instead of Adobe Reader. I recommend Foxit Reader ( http://www.foxitsoftware.com/pdf/reader/ ), since it's free, VERY light, VERY fast, safe and also has a Firefox plugin (make sure you don't have both Adobe Reader plugin and Foxit Reader plugin enabled/installed at the same time in Firefox) -
Oracle 10g form not always running in windows 7
hello all of you experts , the query which I am going to post here is very annoying for me but it there might be a simple solution to my problem. I have installed oracle developer 10g on windows 7. Changed the formsweb.cfg file so that it uses java plug in rather than jinitiator I have installed the JRE version 6, now the problem is that when i try to run a form sometimes it runs properly but sometimes the browser window becomes blank and the form is not visible in it and yes the splash screen which shows the name of application server stays there on the screen. the problem is in internet explorer, mozilla and chrome as well didn't check on any other browser. Please help me out i would be grateful to you guys out there. Just to let you know that this annoying behavior is not always there, i dont know why some forms do run properly but some of them dont.
That is actually not an uncommon symptom for any Windows platform. However, I will say that if you are running on Windows 7, it should be Win7-32bit and you should have installed the 10.1.2.3 patch set. Anything else would not be considered certified by Oracle and therefore not supported. The details on how to properly install Forms/Reports 10.1.2 on Win7 are outlined in MyOracleSupport note 1292919.1
Assuming you covered all that, with Dev Suite this often happens when you have abandoned a process previously then tried to start another before the first has been terminated. In other words, next time you have this happen close ALL open browser windows then open the Windows task manager. Look for any orphaned frmweb.exe processes and kill them. Now go back and try starting a form. It should work now.
It is never a good idea to terminate a running form by closing the browser. It is important that you close the form first (e.g. using the Exit button in the form) then close the browser. Closing the browser while a form is running can cause runtime processes to become orphaned. Generally these will be cleaned up when FORMS_TIMEOUT is reached (usually 15 minutes), but the point is that you have prevented a clean shutdown from occurring. So always make a best effort attempt at closing the form properly. End-users should be encouraged to do the same when the application is put into production. -
Ever since upgrading to Mountain Lion, my AOL messages sometimes, but not always open with a blank page. If I open AOL in Firefox, the messages open fine. This does not happen with any messages by any means, and it is not any type of certain message. In fact, in the same screen I can often open an email from the same sender with email intact. This is weird. Sometimes I close the page and open a new page. Sometimes that works and sometimes it does not. It is a very annoying thing.
Hi,
When you start Messages fro the first time you are asked for an Apple ID
When this is verified and entered it appears in Messages Menu > Preference > Accounts and is Enabled.
The App should have also picked on on those iChat Accounst you had before.
These should be Enabled if they were when you last used iChat.
Exactly which "Accounts" are logged in can be seen in Message Menu > Accounts and will include the iMessage "Account" and Bonjour.
In the Window menu you will see CMD +0 for the Messages window and CMD+1 for the "Buddies" window which is a combined list at this stage.
Go to the Preferences > General Section and Untick the "Collect all accounts into one list".
This will give you separate iChat type Buddy lists.
You can check if that account/Buddy list is set to Invisible or if in the Preferences > Accounts > Security you have settings that will block some people from seeing you as On line.
You are saying Buddies can see you as On Line which implies they are still sending to your AIM based Names (@Mac.com is a valid AIM Screen Name)
I am not sure from your post if you are trying to iMessage their email IDs thinking they are Apple IDs and that they are using Messages as well.
There is no Buddy list for iMessages side
No-one can tell you are "On Line" until they have your details in the "To" spot in Messages with the correct iMessaged contact info (iPhone Number or Apple ID)
Obviously an Apple ID can be an email or look like one.
In some cases they are also valid AIM Screen Names as well.
In the case or the @mac.com name you may have linked this Apple ID to iMessages as well.
11:31 PM Saturday; August 11, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
How do I convert a Vector to be passed into the session
Hi I have a vector in a JSP that I need to pass on to a second JSP. I use the following command to do that just as I pass normal other strings:
session.setAttribute("MyVector",vecData);
But the follwoing error is been thrown by Tomcat.
Incompatible type for method. Can't convert void to java.lang.Object.
out.print(session.setAttribute("ResultsSet",set));
^
I guess I have to convert it explicitly into an object and then how do I do that? could someone please help me fast on this?
if this doesn't work is there some other way to send this vector to my other page? I am currently sending enough strings using the above method, but for Vectors it doesn't seem to work though I am told that a session object can carry any object unlike the request object that carries only strings. Please help!!!!Hi Calin thank you so much for taking ur time to help me with my problem.
well let me explain my requirement fully in detail. JSP1 has a form on it for the user to fill in. its in the form of a table with multiple rows. say as in entering product details one after the other in an invoice.
I want each of these rows taken in and passed into JSP2.
What I do is pack each row of the table into a hashtable using a 'for' loop.
Then I add each record (within the 'for' loop) to a Vector. After the 'for' loop, outside of it, I set this Vector to the session as :
session.setAttribute("RecordSet",vecRecordSet);
Well let me copy paste and extract of the coding from my source which shows what I have done.
Vector set=new Vector();
for (int i=0;i<Integer.parseInt(request.getParameter("NoOfRecords"));i++)
Hashtable Record=new Hashtable();
Record.put("ReminderStatus",ReminderStatus);
Record.put("CustomerNo",CustomerNo);
Record.put("CustomerName",CustomerName);
Record.put("Address",address);
Record.put("ContractNo",ContractNo);
Record.put("MachineID",MachineID);
Record.put("ModelNo",ModelNo);
Record.put("Description",description);
Record.put("SerialNo",SerialNo);
Record.put("ContractValue",ContractValue);
Record.put("NoOfServices",NoOfServices);
Record.put("ContractStartDate",ContractStartDate);
Record.put("ContractEndDate",ContractEndDate); set.add(Record);
session.setAttribute("ResultsSet",set);//SHERVEEN
well don't worry about the for loop condition up there cos it works for the main functionality that exists within the for loop. but what seems to go wrong is when I add records to the hashtable and when I pack it to the Vector "set"
I hope I have not done something wrong as a principle over here.
And btw the error that I showed u before, is pointed at a row which exists in the file that is generated when compiled. the out.println part is generated in that file during compilation and I don't know why.
I hope I have given u information for u to make some sense of my requirement and thank u a million once again for ur effort to help me out. I am grateful to all of u. -
My MacBook Pro keyboard won't type an upper case 'C' using the shift key... only with caps lock. Workaround has been to use Typinator by typing a double lower case c, not always the best solution. Mac is a refurbished model, which initially was fine. Apple tech helped me correct the quirk when it first appeared, but now it has returned and refuses fixes. Any ideas?
I'm willing to bet that this has something to do with iCloud. I've been facing a frozen computer nearly every time I go into it.
In Activity Monitor I have seen two programs associate with iCloud that take up about 2.5 GB of memory (I only have 4 in the computer) -- causing everything to freeze. One of these is called "iCloud Helper" and the other one is something like "Address Book Sync helper" -- I see parts of these names in the stuff you have posted.
I am at my wits' end with these and have written to Apple asking them to do away with these or fix them. To get rid of the Address book sync thing I have gone into system preferences for iCloud and unchecked Contacts -- but then spontaneously it gets rechecked. And oftentimes after I Force Quit the iCloud helper, it spontaneously turns on again. My conclusion --- the iCloud is basically unusable. It turns a Mac into the most useless, clogged, sluggish PC. If this is happening to a lot of people's computers -- and I see no reason why yours or mine should be an exception -- these programs just might destroy Apple itself.
So -- I'm about to completely give up on iCloud, and I suspect that others will too unless this gets fixed.
Cheers,
Bob -
ENTER keystroke on text input entry not always submitting
I have run into a problem where once a user has completed the
text input entry and has clicked the ENTER button to "submit" this
entry, the ENTER keystroke event is not always "submitting" the
input entry. Sometimes it requires hitting the ENTER key two or
three times before the slide moves on.
We are loading the captivate files into a custom flash
interface (but there are no key events in this interface that could
conflict with the captivate's ENTER keystroke) and I have the
maximum number of attempts set to 1.
I did some debugging from the custom flash interface, and in
the captivate .swf, the proper input field has focus and the ENTER
keystroke is being captured
Has anyone else experienced this problem? Does anyone know a
possible solution?I’ll try to explain the problem more clearly.
I want the name that is loaded from the textfile into the combobox to be selected from the list.
Once an item is selected everything works just fine. But I don't want the user to select the item, when the name is loaded into the combobox. The user will expect that the item will be selected automatically. Is that possible?
The function I want is the opposite of combobox.selectedItem. Instead of having a selected item and getting the name, I have a name and I want to select the item.
The name is a correct name, because the name is saved from the combobox. -
Wake on Lan (works, but not always)
Iam trying to get Wak on Lan working on my iMac. It works, but not always. When I put my mac to sleep en send the magic package, my mac turns back on. But when my mac turns to sleep and I wait a few hours (the next morning), my Mac doesn't respond to the same magic packag. When I wake up the Mac by hand, and put it back to sleep again, the magic package works again en turns the mac on.
It almost looks like the mac goes into a deeper sleep mode after a few hours. Does anyone knows what could ben the reazon.mmm, It seems like my mac doesn't always turns to sleep mode. Most of the time it only turns off the screen (solid light). My energy settings are 10 minutes for the screen and 15 minutes for the mac. But after turning of the screen it never turns to sleepmode. Ecxept when I put it to sleep manualy.
Strange thing is: when the screen is turned of, shouldn't I be able to get tot my files... (I can't actualy).
Maybe you are looking for
-
Add a new field in report S_ALR_87012178 and use it for sorting
Hi all, We're requested to add a new field KNVV-VKGRP in this report S_ALR_87012178 (program RFDOPR10). As this is a standard program, I'm thinking of copying it into a Z one due to the problems when editing the report. Does anyone know the best way
-
13-inch, Late 2011 Macbook Pro and Thunderbold Display...
Hello Dear Users, First I wish you have a nice new year with full of health, happiness and wealth, then i am asking my question: I am using a 13-inch, Late 2011 MacBook Pro having Processor 2,8 GHz Intel Core i7 2 cores+2 HTs Memory 16 GB 1333 MHz
-
Safari adding .hqx to downloaded file name
I am on an imac with mac os x 10.4.11 and safari 3.0.4. I download a mac cd image file with filename of the form x.y.z.iso. safari downloads it but, mysteriously, adds .hqx to the name so it stores on my mac as x.y.z.iso.hqx. Then it tries to unstuff
-
How could I export a sqlplus query to a .txt file?
Hi, I have an Oracle 10g database running on a linux e3 server. I have generated a SQL query using sqlplus on the server site, so the result is under the SQL> How could I export it to a .txt? Thanks a lot! Any advice is highly appreciated! Qian
-
Photoshop_13_LS16.dr error-4960
can anyone help me to solve this problem? it kept telling me everytime I click on adobe download assistance. I couldn't even cancel the extracting although an hour of waiting.