List of values is not displayed in web inteligence report

I created a web inteligence report and put into my favourite folder. The report consist of a selectable list of values in a prompt but it does not appear in my favourites folder.
The users with administrator rights that copied this report into their own favourites folder are able to see the list of values in the prompt.
It seemed that the list of values does not display in the prompt when non administrator rights opened this report in their own favourites folder.
Anyone can figure out how to set the access rights so that non administrator can see the list of values when the web inteligence report is opened in their own folder.
I am using Business Objects XI 3.1 ..

SOLVED
     CMC -> Connections
-     Right click connection name, Click u201CTools > Check Relationshipu201D
-     In u201CQuery Resultsu201D, Right click Connections, Click u201CUser Securityu201D
-     Assign Security for u201CEveryoneu201D
-     UNTICK both Inherit from Parent Folder and Inherit from Parent Group
-     Assign u201CView on Demandu201D
     CMC -> Universes
-     Right click u201CUniversesu201D folder, click u201CPropertiesu201D
-     Under u201CUser Securityu201D, click Everyone and assign security
-     UNTICK both Inherit from Parent Folder and Inherit from Parent Group
-     Assign u201CView on Demandu201D

Similar Messages

  • Place Holder values are not displaying when calling the report

    Hi,
    I have a Place holder column in my report and i am assigning the values in a formula column. When i run the report from report builder place holder column is showing the value. But when i deploy the same in application server and i try to invoke from a form it is not the value of that place holder column. Why is this happening? Please, help me in resolving the same.
    Thanks & Rgds,
    M T

    Yes Gayatri. You are right. When i run the report from report builder it is working perfectly. The same report i deployed in application server and invoking from a form report is not showing the values for place holder columns.
    Why is this happening?
    How to resolve it?

  • Fileter value not displaying in web

    Hi all,
    I have a issue with selecting the filter value for a unit.
    The problem is I can find the value when I run the query in BEx, but same value is not displaying in webreport.
    Can anyone tell me, what might be the problem.
    (Actually I have to filter on a perticular unit value. In the masterdata I have 30 values.when I exicute the report in BEx I can find all 30 values.But when the same report in web I can see only 29 values)

    Hello Madhu,
               whats happening there is java script code in ur webtemplate  is desined to pull only those value go to ur webtemplate and click on the html look at he code there and do changes required to get the value you want.Hope this helps.
    Thanks & Regards
      Jai

  • Dynamic List of Values does not appear

    Hi All,
       I am re-creating this post as I have not received an answer on it.
    Hi All,
    I created report (using Crystal Reports 2008) in which one of my parameters displays a dynamic LOV from a field. When I run the report in Crystal, I get to select which values I want for record selection in my report.
    However, when I save this report and run it on the Crystal Server (2008) using infoview, I do not get the dynamic LOV. Rather, I have to manually type a value that I want to select.
    Why does the LOV's not work when I run it through Crystal Server? Another thing, when I access it from Crystal Server through Crystal Reports, I still lose the dynamic LOV option.
    How do I use parameters so that I can select from a dynamic list a values? It behaves normally in Crystal Reports 2008 but loses it's functionality on the Server.
    Thank you in advance.

    This just started happening to me as well, the reports I created (using standalone crystal reports 2008) contain dynamic parameters and suddenly they stopped working as intended in some reports.
    I noticed that when the datasource is a single table or a single view the cascading (nested) dynamic parameters and dropdowns are working fine, but when the datasource is two or more linked tables, the parameters prompt shows two empty text boxes instead of two dropdowns. I tried refreshing and verifying the database but nothing works. So until we find a real solution, we're basing all our reports on single views.
    This remains a serious problem because in some cases we don't have write access to the database to create views, and basically we're recreating all the reports that now suffer from this problem.
    Edited by: Talal Nehme on Jan 7, 2009 7:29 PM

  • HT5364 Safari is not displaying the web page content & Crashes on clicking Security Tab in Preferences!

    I have Mac 10.8.4 with Safari 6.0.5.
    Safari is not displaying the web content but images on the web page are being displayed.
    Although the webpage is loaded, but nothing is shown else than Images. When I hover the mouse on the blank webpage shown, the cursor changes on the links on the web page.
    I tried resetting the preferences from the menu as well as deleting the Preferences of Safari from ~/Library/Preferences/ but nothing helped.
    When I open Preferences of Safari & click on Security tab, It Crashes!!
    Thanks,
    Shubhi

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

  • KF value is not Displayed in BEx Report ..where as cube, mpro end ok..!!

    Hello Experts,
    I ran a bex report. In that report KF some NetsSalesValue has not displayed in the BI Report for all the Sales Organiations where as other KFs has displayed the value for all the Sales Organizations.
    For that i checked my end. BI report is pulling data from Cube --> Multiprovider --> Bex Report.
    I myself checked KF value into Cube level, multiprovider KF level value is avaialable.
    And also i checked, in the query properties is there any filters, RKF, CKF, but...i found the KF is a basic KF.
    And also..i checked the whether the rollup has happened..properly or not and ran the query but no use.
    For your info upto 3 days..back KF value has presented in the report. After that only this issue has encounterred.
    I am in confusion where the exact issue will be.
    If any body faced this kind of scenario is your project, kindly reply me.
    For any more clarifications i will respond you immediately.
    Thanks,
    SN

    Hi,
    check aggregates,index etc for cube
    check key figure selection as well in Multiprovider for respective Infoprovider
    just create test query on Infoprovider and then on Multiprovider and see..
    Check RSRT - regenerate the query
    also see there are various options like execute+debug has ....just check them
    Thanks and regards
    Kiran

  • Condition value is not displaying in sales order

    Hi Friends,
    when i am creating sales order, condition type(JEXP,JECP,JA1X..) is displaying in cond.type column and percentage(14%,2%,1%) is displaying in amount column and
    the condition value is not displaying in cond. value column in conitions tab of  sales order.
    In analysis it is showing as condition record found...
    please help me...
    with regards

    Hi,
    can it be that you have a problem with units of measure? Often, if there is no value in Condition value, the problem is in the master data of material. Did you use standard schema? If you not, have you tried it with standard schema? What is your value under "per" and "UoM"?
    Regards Thomas

  • Rate and accessable value is not displaying for the tax invoice output

    Hello All,
      Rate and accessable value is not displaying for the tax invoice output. Rest of all outputs for invoices shows Rate and accessable value.
    Scenerio is free of charge sales order (samples) removing the goods from pant so excise invoice has been created and also updated. but for tax invoice out put rate and access value is not displaying.
        Pricing procedure: In pricing procedure account keys have not been maintained because there is not gl account upadation during billing for free of charge delivery.
    Thanks & Regards,
    ramesh

    hi Gurpreet,
    You can add values to that transient column programatically,either by getiing the row from the iterator and then row.setAttribute('Column_name','Value');
    Or providing value to it in the SQL...

  • List of values in an universe or webi rep based in a bex query

    Hi ¡
    I need to create a list of values in an universe or webi rep based in a bex query, this  LOV  should be included in a formula used to filter our values when we run we webi rep.
    Any clue will be apreciated
    thanks

    Hi,
    which version of BOBJ are you using?
    Regards,
    Stratos

  • Service order values posted to WBS, values are not displaying in CJii3

    Hi,
    We have posted thevalues from service order to wbs.
    values are not displaying in cji3.
    Regards,

    Hi,
    If the data has been successfully loaded into BPC, then it should be visible in BPC report.
    You need to make sure that you are looking at the correct data region. Check in RSA1 and check which data region has the data. Maintain the same region in the report as well.
    Hope this helps.

  • Safari not displaying some web pages properly why?

    I have been finding of late that safari does not display certain web pages properly. i.e.: text overlaps other text  and is not formatted properly. This seems to have become more common lately. Even Apple's own apple info page does not display properly. Could this be a setting in safari that I have messed up somehow?

    Go step by step and test.
    1. Delete Cookies
        Safari > Preferences > Privacy > Cookies and other website data:
        Click the “Details” button.
        Remove all cookies except from Apple, your internet service provider and banks.
    2. Safari > Preferences > Extensions
        Turn off Extensions if any and launch Safari again to test.
        Turn on those one by one and test.
    3. Delete Caches.db
        Close all windows and quit all applications.
        Hold "option" key down and click "Go" menu in the Finder menu bar.
        Select "Library" from the dropdown.
        Library > Caches > com.apple.Safari > Caches.db
        Right click the Caches.db file and select "Move To Trash.
        Close windows and relaunch Safari.
    4. Empty Caches
        Safari > Preference > Advanced
        Checkmark the box for "Show Develop menu in menu bar".
        Develop menu will appear in the Safari menu bar.
        Click Develop and select "Empty Caches" from the dropdown.
    5. Temporarily  turn off  Safari iCloud sync and test.
         System Preferences > iCloud
         Uncheck the box beside “Safari” and test.

  • Explorer Measure Values  does not display as in BW

    I have developed some of the explorer reports based on BW queries. The Measure values display correctly in BW query , but  the value is not displayed correctly in explorer if I add multiple dimensions in the Info space
    If I add only one dimension Eg:- Calender Year in infospace the result of the explorer matches with the BW query but if I add mor ethat 1 dimesnion , if I have added Region , Country to the infospace and then drill down the result by any of teh dimesion the result does not match
    Thanks

    Hi Merhan,
    Yes, that would probably solve the problem. However I do want the actual <pattern> to be in there to access it in JavaScript.

  • Values are not getting updated in sales report

    I have configured sales information system, and i have been trying to run sales report but values are not getting updated in sales report, System will through message that no data exists.
    regards,
    thooyavan

    Hi,
    Please check with the Customer and Material Statistics group in the Customer and material master respectively.
    Further check with the LIS settings (Sales Area combination with the Update group).
    Reward points if this helps you.
    Regards,
    Harsh

  • Default value of BeX customer Exit variable not Displayed in WeBI??

    Hello Experts,
    We are stuck with a problem where WeBI report is created on top of BeX query and we are not able to see the default value of Bex Customer exit variable in WeBI run. Here is the complete scenario:
    1. One restricted KF is created in BeX, restricted with Customer exit variable on net Due date. And this variable is mandatory, ready for input, and Default value in calculated is user exit as current Week's Monday.
    2. So, by default KF data should be restricted to Monday of current week, if user does not change this value.
    3. Now, WeBI report is created on top of this Bex query, and all is working fine, i.e. we are getting variable as Prompt in WeBI, but Default value is not shown while Running the Webi Report.
    So, need your inputs on the same, if default values from BeX in WeBI is supported or not? If yes, why this is happening, and how to resolve it?
    Please notice, the restrcition is in KF only, it is not a separate restrcition on Net Due date in Filter area or in Defualt area of BeX
    and we are on SAP BW 7.1 and BOXI 3.1 SP4.
    Regards,
    Vipul
    Edited by: VIPUL GOYAL on Nov 23, 2011 9:44 PM

    Hi,
    See 1285993 - Support of Customer Exit Variables from BEx query into WebIntelligence via OLAP universe
    WebI will prompt when executed, but the default values calculated by the user exit  - do not appear.
    Note: If the BEx variable has property 'ready for input' set / enabled, then its WebI prompt shows ok, but no default value appears.
    Cause
    This behaviour expected 'by design' (in the context of the product's current limitations) as explained in the online guide below:
    Please refer to Chapter 7, page 44, document link here: http://help.sap.com/businessobject/product_guides/boexir3/en/xi3_sap_olap_universes_en.pdf
    Characteristic variable > processing type > Customer Exit  is "Supported, without user entry"                                                                               
    -->  This should be understood as meaning "User will not be shown a prompt"
    regards,
    H

  • Discussion Board item not displaying in web part page

    Hi, I am using SharePoint 2013 on-premise. I created new Discussion Board name as "Discuss" and displayed in
    Management View as shown below.
    The list item showing properly without any issues.
    But when i am adding this web-part into web part page with Management
    view. The items are not displaying.
    What is the issue.? How to display the items here.?
    Thanks in advance.

    Hi Ismaiel,
    The Discussion Board is in same site.
    If displaying the web-part page with Subject view the items are visible.
    But when i am changing the view to Management the items are hidden.

Maybe you are looking for


HashFlare