Livecycle: Is there a way to add a new page by choosing what kind of page from a drop down menu

I am creating a form to be used for patient care,
I have multiple pages, the first is an information page, second is an evaluation page, the third is a treatment page.
I am hoping to add a drop down menu (Add New Page) with the following in it:
1. Treatment Note
2. Discharge Summary
3. Treatment Order
4. Progress Note
Each of the selections corresponds to a specific page layout.
     ie:  1.  Vitals, signature, etc.
           2. Previous information compared to current status
          3.  Ordering equipment etc.
          4. Updating referral source.
I am new to this so any help is appreciated, assume I know very little to begin with so specifics on how to create your recommendations are greatly appreciated.
Cheers

The attached contains a drop-down that sets focus on a text field on the applicable page. The effect is to navigate to the page. The exit event looks like this...
//form1.page1.subform1.pageSelection::exit - (JavaScript, client)
switch (this.rawValue) {
case "Treatment Note":
   xfa.host.setFocus(form1.page2.subform1.someField);
   break;
case "Discharge Summary":
   xfa.host.setFocus(form1.page3.subform1.someField);
   break;
case "Treatment Order":
   xfa.host.setFocus(form1.page4.subform1.someField);
   break;
case "Progress Note":
   xfa.host.setFocus(form1.page5.subform1.someField);
   break;
default:
   break;
There are a variety of ways this could be accomplished.
Steve

Similar Messages

  • Information Broadcaster --can't add recipient from the drop-down menu

    Hi,
    When I create the setting in the information broadcaster, on Recipient tab I can type in the users separated by semi colon, but when I select user(s) from the drop-down menu the recipient field is filled with 'on' 'on' and when I click check the error message says 'on' is not a valid user.
    The same happens when I select a role from dropdown menu.
    In short I can schedule the reports with manually entered recipients but can't select recipient from dropdown menu.
    Have you guys run into this situation and got solution?
    it's BW3.5 SPK16, mail server is configured, users are maintained in SU01 with valid email addresses.
    Your helpful answers will be rewarded.
    Thanks again,
    Fred

    Hey Gopi,
    Nice to meet you here!
    I did try to add my own user id which is a valid user from dropdown menu but got an 'on' on the field. When I typed my user id on the field, it accepted it. Basically the pop-up selection screen from the drop down menu is not transfering the correct values to the field. Very wierd?
    Help me out Gopi if you are the Gopi I know.
    Fred

  • How do I delete something from the drop-down menu of the URL bar. I went there accidentally and don't want it in the list.

    I directly typed what I thought was the correct URL into the URL box. It took me to a site different from where I was wanting to go. Now that site's URL is in the list of URL's in the drop-down box. Is there some way of deleting this from the drop-down list? It seems to me that there used to be a way to do this--a small x on the right side of each site's URL in the list. After one of the updates this was no longer there.

    touch it with mouse, don't click, and press DELETE.
    tell us if this work for you, thank you

  • Is there a way to add a new field to the MD15 layout

    Hello,
    I wanted to add new fields to the MD15 layout list. For example "Vendor ID and Old Material #" Is there a way to do that?
    Thanks

    Hi
    How did you add those columns!? 
    I have similar requirement.  I tried using BAdI "MD_ADD_COL_OVERVIEW"; that works only for MD04.  which enhancement or badi you have used to add columns.
    Thanks,

  • Is there a way to change the date format so that delegates have to choose a day, month and year from a drop down menu as my delegates keep forgetting to change the year of their information

    When my delegates are filling in a event form i have put together, a large number of them forget to change either the month or year on the date field. Is there a way to have a date field that has drop down boxes for day, month and year so they have to choose rather than a date been already on the screen??
    Thanks

    Hi Christopher,
    The WEEKDAY function allows specifying either Sunday or Monday as the first day of the week:
    WEEKDAY
    The WEEKDAY function returns a number that is the day of the week for a given date. WEEKDAY(date, first-day)
      date:  The date the function should use. date is a date/time value. The time portion is ignored by this function.
      first-day: An optional value that specifies how days are numbered.
    Sunday is 1 (1 or omitted):  Sunday is the first day (day 1) of the week and Saturday is day 7.
    Monday is 1 (2):  Monday is the first day (day 1) of the week and Sunday is day 7. Monday is 0 (3):  Monday is the first day (day 0) of the week and Sunday is day 6.
    But I think you are referring to the first day of the 'workweek', for which I do not see a means of defining a custom value.
    Since you want to 'insert categories', though, you could easily define your own, using WEEKDAY(date) or WEEKDAY(date,1), plus an IF statement to return the category label appropriate to the day. Here's one for a Sunday to Thursday work week. Dates are in column A, the formula is in whichever column you want as the Category column. For the example, I've placed it in column B.
    B2, and filled down: =IF(WEEKDAY(A)<6,"Work","Off")
    The top table shows the weekday numbers returned for each day of the week for each of the three permitted values for the optional second argument. The bottom table shows the results from the formula above, used to define a category label for each date:
    A10 was left blank intentionally, to determine if the lack of data resulted in an error. The Warning message, flagged by the blue 'warning' triangle, is "The formula uses a number in place of a date." The 'date' assigned to this numerical value of zero was a Friday, but I'm not certain when. Probably best to avoid extra rows with no date shown.
    Regards,
    Barry

  • Is there any way to add text or arrows onto photos in iPhoto when creating a book?

    I am creating a photo book (Album), in iPhoto, in Projects. There are some place where it would be helpful if I could draw an arrow on the Photo to indicate certain places. I also would like to add text onto a photo in the book. This is as well as typing in the 'text box' provided. It needs to be on the actual photo in the book. Is this possible? I am using Version 9.5.1 which i think is the latest and i am running on Maverick on my iMac.

    There is no way to add anything to the face of a photo in iPhoto at all You will need an extenral editror for that kind of work. You can add text and arrows etc with Preview, already on your Mac or with apps like these:
    Seashore (free)
    The Gimp (free)
    Graphic Coverter ($45 approx)
    Acorn ($50 approx)
    Pixelmator ($50 approx)
    Photoshop Elements ($75 approx)
    There are many, many other options. Search on MacUpdate or the App Store.
    You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.

  • Is there any way to add sub-mailboxes to the Inbox in Mac Mail 4.5?

    So, back when I was using Mail 3.0, I was able to create new mailboxes/folders within the INBOX of a specific account.  When I upgraded my machine, Mail changed to "Locations" with the generic locations "MAILBOXES", and "ON MY MAC", "REMINDERS" as well as locations for any account, say "IMAP" and "EXCHANGE".  Currently, I can add a new mailbox, but my only options are to add to "ON MY MAC" (and any subfolders within), "IMAP", and "EXCHANGE".  The option of adding mailboxes to anything under the "MAILBOX" tab is not an option.
    What I'm wondering is if there is a way to add mailboxes to accounts and have it show up under the MAILBOXES location, rather than under the specific mail account location, as each mail account, ("IMAP", "EXCHANGE") also holds additional folders for Trash, Sent, Drafts, etc.  I have about two to three folders per account that I would like to keep stored on the server, and when Mail is handling multiple accounts, using the "locations" for each account takes up a surprising amount of space.
    I know that there is a way to get sub-mailboxes for each account in the MAILBOXES location (as I currently have several in an IMAP account), but these were all carried over from Mail 3.0 and any additional mailboxes are delegated to the location "IMAP" rather than MAILBOXES/IMAP/sub-mailbox.
    Basically, I'm wondering if I can create mailboxes like this: MAILBOXES/Account/Mailbox rather than ACCOUNT/mailbox
    *I realize I asked the question several times, but hopefully the additional wording helps to solve the issue.

    There is no way to add anything to the face of a photo in iPhoto at all You will need an extenral editror for that kind of work. You can add text and arrows etc with Preview, already on your Mac or with apps like these:
    Seashore (free)
    The Gimp (free)
    Graphic Coverter ($45 approx)
    Acorn ($50 approx)
    Pixelmator ($50 approx)
    Photoshop Elements ($75 approx)
    There are many, many other options. Search on MacUpdate or the App Store.
    You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.

  • Is there any way to add a date stamp to a photo

    I have about 50 photo's that for some reason my camera did not put a date stamp on it. Is there a program that I can add a date stamp to the photo?

    You'll need an external editor to disfigure the photos that way
    In order of price here are some suggestions:
    Seashore (free)
    The Gimp (free)
    Graphic Coverter ($45 approx)
    Acorn ($50 approx)
    Pixelmator ($50 approx)
    Photoshop Elements ($75 approx)
    There are many, many other options. Search on MacUpdate. You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.

  • Is there a way to fill a cell with a value based on the selection from another cell?

    For example: If have a drop down menu created for Cell A1 with options (Dog 1, Cat 2, Bird 3). Is there a way to fill cell A2 automatically when I select from the drop down menu.
    So if I selected 'Cat' in A1, cell A2 would automatically input the 2.

    I suggest an extensible method that allows you to add other animals:
    This method adds a small table called "Animal Lookup" that matches names (same as in the pop-up menu) with a value.
    The table on the left uses this table to retrieve the value based on the animal:
    B2=VLOOKUP(A2, Animal Lookup :: A:B, 2, 0)
    select B2 and fill down

  • Speaker drop down menu in itunes is not there.

    I have airport express and set up airtunes, but itunes does not have a drop down menu to pick which speakers to play through. There seems to be no support docs on this. The airtunes setup page makes it sound like, hey, no problem, just choose the speakers from the drop down menu in the bottom right of itunes. But it just ain't there, and there is no advice on how to make it work. The airtunes instructions are very lame. It works great for the Internet, and all the software is up to date. I've rebooted, restarted itunes, and airport express. No go. They made it sound so great when I bought airport express.

    Ok, got link by pasting
    To stream music from your computer to an AirPort Express, or to stream videos and music from your computer to Apple TV, click the icon in the bottom right corner of the iTunes application (verify that you have iTunes 10.2 or later)."
    But , my iTunes, 10.5, has no such icon.

  • I create a birthday calendar in iCal and then click on it in iphoto at the begining of the calendar project each year.  Some how the birthday did not populate the photo calendar.  Is there a way to add the birthday iCal calendar into the calendar project?

    I created a birthday calendar to use in iphoto for calendar.  When a new calendar project is started each year, I click on it in.  Some how the birthday did not populate the photo calendar this year.  The photo calendar is almost complete.  Is there a way to add the birthday iCal calendar into the calendar project? I would prefer not to start over.

    Hi,
    If you first select the calendar on the left, so that its background is highlighted blue/grey, when you make a new events they should be added to that calendar.
    Best wishes
    John M

  • Is there a way to add two windows in the same window?

    is there a way to add two windows in the same window?

    what do you mean by your first use of the word "window"? do you mean a visible frame? a section of the gui that the user doesnt see?
    or perhaps you mean you want to add multiple tabs to a single window, so that switching between tabs shows different windows?

  • Is there a way to add to the existing values in a container when a LabVIEW prototype (cluster) changes?

    Is there a way to add to the existing values in a container when a LabVIEW prototype (cluster) changes?
    I have a cluster with 90 values..  ninety!  yes that many.
    Change one bloody value and the prototype changes in the TestStand step...  Reload the prototype and guess what happens??!!??
    All the bloody values get reset to defaults!  AAAAAAAAAAAAAARRRRRRRRRRRRRRRRRRGGGGGGGGGGGGGGGGGHHHHHHHHHHHH!
    If it was in one place, I could survive the ordeal.  But I have to change bloody prototypes in many places!!!!
    more AAAAAAAAAAARRRRRRRRRRRGGGGGGGGGGGHHHHHHHHHHHHHH!!!!!!!!!!!!!!!!!!!!!!
    I can't even copy the bloody values!!!!!!!  AAAAAAAAAAAARRRRRRRRRRRRRRGGGGGGGGGGGHHHHHHHHHHHH!!!!!!!!!!!!!!!!!!
    Are there any tricks that I am not aware of, or have forgotten over the years, or...  ...   something??!!??!???!!
    If there are none, I will have to post an improvement to TestStand..  I should mention I am using an older version (4.1).

    Hmmmmmmmmmmmmmmmm,
    I am not not very famous with LV and its cluster types.
    So no idea if this works (it works for DataTypes updates very well and a LV cluster is Data Type so.... maybe)
    Make a copy of the step that has to be modified to an new sequencefile. 
    Make modifications the in the copy.
    Now you should have the same DataType Name but other contents in the container. Save it.
    Normally there should be a message box that tells you that version has been incremented. - Accept it.
    Set in StationOptions-File "Allow Automatic ...." to Never.
    Open original sequencefile. Now the there must be a type conflict. Accept/Apply to all  "Use Current Loaded.."
    You have updated the type.....
    Hope this worked,
    Juergen
    =s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

  • Is there some way to add multiple addresses to an email I am sending that doesn't close the contact list after I click on an address?  This necessitates constantly going back to click the + sign to add each address separately.

    Is there some way to add multiple addresses to an email I am sending that doesn't close the contact list after I click on an address?  This necessitates constantly going back to click the + sign to add each address separately.  Is there some way I can open the contact list, click on all of the individual addresses to which I want to send the email without the list closing between each address entry, and have all of my address entries be listed to the email at one time?  Something like it works in Gmail.  I do not want to use set lists, I want to enter different addresses each time I send an email.  And I am a very slow typist, so I don't want to type the first few letters of each recipient's name.  It is much faster for me to just click on the e-mail addresses in the list as a group.  It doesn't make any sense to me to have to reopen the contact list for each address, when it should be so easy to click on all of the addresses I want at one time and then click once to add them all to the email as a group.  If there is a solution to this, please tell me.  Thanks.

    Vatlily,
    Try this:
    1. Select Mail>File>New Message.
    2. Select Mail>Window>Address Panel.
    3. Use (command+click) on the desired addressees in the Address Panel to create the list.
    4. Click "To:" on the top left of the Address Panel.
    The group that you selected will be added to the "To" field in your New Message.

  • Is there a way to add/delete words from the predictive text ?

    Is there a way to add/delete words from the predictive text options that my iPhone is giving me? I'm using an iPhone 6 Plus with iOS 8.
    There are specific words that are popping up in the area right above the keyboard where it displays 3 word suggestions to choose from. This area seems to suggest words that I have typed before, I'd like to remove these words. Default seems to select the word in the center and when I'm typing fast on occasion it will recommend and select words that I don't need to use.
    Any help would be appreciated.

    999753 wrote:
    I know in 10g delete is added but in 9i i can only work with UPSERT( update, insert)
    is there a way to add delete into 9i MERGE? or somehow encapsulate it?
    Thank youI would suggest upgrading to a supported version of the database. 9i has been unsupported for many many years now.
    And to answer your question... to the best of my knowledge, there is no workaround. It works as it works.

Maybe you are looking for

  • I need help with CSS and floating

    Okay, I know I need to get up on CSS and get rid of tables in my sites. However, I'm running up against a problem, and after banging my head against it for a while, I realize I need help. I've stripped this down so as to only show the area where I'm

  • Error in creating XML photo gallery with Flash CS4 and AS 3.0

    Hello, all. I've been creating an XML photo gallery with Flash CS4 and AS 3.0 following a tutorial. I followed the instructions step-by-step but at the end I got the following error message instead: Error #2044: Unhandled IOErrorEvent:. text=Error #2

  • When triggering a UBE filter to run an external batch file, it doesn't work, although the rule is triggered.

    UBE filters are not running a batch file as an external program. The batch file is located in the postoffice spool directory and has the correct permissions. <P> Change the RUN command to REJECT to check that it was actually triggered. <P> <B>Backgro

  • Un reconciled transaction report

    Hi all, When we run BRS report we will get reconciled transaction and Unreconciled transactions report Under Unreconciled transaction we will get a headings and values as follows Open in Book after dates       xxxxxx                                  

  • How to custom the standard steps ?

    Hi, I want to modify scripts launched by standard steps to include only database steps. How can i know which script is called by the step ? i understand that the naming convention in $EOF_SCRIPTS is like : first 2 characters -> module impacted Number