Logic for FIFO in ALV o/p

Hi
I have o/p like this, which I want to display in FIFO method
Material - Total Qty - Qty in store - Qty in Elctronics - Qty in Mechanical - Delivered Qty
SPDEW - 5 - 1 - 2 - 2 - 0
like this - (here Sr. no. is manually entered not from sap table fields)
Material - Serial no. - Total Qty - Qty in store - Qty in Elctronics - Qty in Mechanical-Delivered Qty
SPDEW - 123 - 5 - 0 - 0 - 1 - 0
SPDEW - 234 - 5 - 0 - 0 - 1 - 0
SPDEW - 456 - 5 - 0 - 1 - 0 - 0
SPDEW - 567 - 5 - 0 - 1 - 0 - 0
SPDEW - 789 - 5 - 1 - 0 - 0 - 0
Hw can I segregate Qty like this ?

Similar Messages

Logic for Refreshing the ALV Report (Very Urgent)

Hi Experts,
My ALV report needs a refresh button on the output.
The Refresh button should be available to allow user to keep this report on screen and refresh regularly rather than going back and running it again.
I am using Function modules and not OOPS Concept here.............As i am unaware of OOPS Please provide me solution in FM's Only.
Kindly send me sample logic for this, Very urgent if ur reply is helpfull.... u will be rewarded heavily.......................
THanks in advance.
Rajesh Kumar

Hi,
This mean to say that if you have a 'refresh' push button in your gui status, every time you press the button, the list should get refreshed.
In ALV, to refresh the table you have to call the method "refresh_table_display".
It has the syntax very similar to creating the table.
It has two parameters. In the first one, you can mention if you want to refresh only the data (the icons are not refreshed)
or
if you want to refresh only the icons around the grid (the data is not refreshed - this option is mostly not used in day to day applications).
the synatx is :-
call method grid (name of grid )->refresh_table_display
exporting
IS_STABLE = <STRUCT OF TYPE LVC_S_STBL> (THIS IS FOR DATA REFRESHING)
I_SOFT_REFRESH = <VARIABLE OF CHAR 01> (THIS IS FOR ICON REFRESHING).
Regards,
Bhaskar

Logic required for Sort in ALV

Hi All,
I am dowloding the ALV report layout in excel sheet thorough mailing functionality.
I want to implenemnt the dynamic sort. Here I am writing this.but i want the logic for below code.
 CALL FUNCTION 'LT_DBDATA_READ_FROM_LTDX'
 EXPORTING
I_TOOL = 'LT'
 IS_VARKEY = W_VARKEY_EU
 TABLES
 T_DBFIELDCAT = IT_DBFIELDCAT_EU
 T_DBSORTINFO = IT_DBSORTINFO
 T_DBFILTER = IT_FILTER_LAYOUT
 T_DBLAYOUT = IT_DB_LAYOUT.
LIT_DBSORTINFO[] = IT_DBSORTINFO[].
 SORT LIT_DBSORTINFO[] BY KEY1.
 DELETE ADJACENT DUPLICATES FROM LIT_DBSORTINFO[] COMPARING KEY1.
 LOOP AT LIT_DBSORTINFO[].
 CLEAR: LW_SPOS,
 LW_UP,
 LW_DOWN,
 LW_SUBTOT,
 LW_COMP,
 LW_EXPA,
 LW_GROUP.
 CLEAR IT_DBSORTINFO[].
 READ TABLE IT_DBSORTINFO WITH KEY
 KEY1 = LIT_DBSORTINFO-KEY1
 PARAM = 'SPOS'.
 IF SY-SUBRC = 0.
 LW_SPOS = IT_DBSORTINFO-VALUE.
 ENDIF.
 CLEAR IT_DBSORTINFO.
 READ TABLE IT_DBSORTINFO WITH KEY
 KEY1 = LIT_DBSORTINFO-KEY1
 PARAM = 'UP'.
 IF SY-SUBRC = 0.
 LW_UP = IT_DBSORTINFO-VALUE.
 ENDIF.
 CLEAR IT_DBSORTINFO.
 READ TABLE IT_DBSORTINFO WITH KEY
 KEY1 = LIT_DBSORTINFO-KEY1
 PARAM = 'DOWN'.
 IF SY-SUBRC = 0.
 LW_DOWN = IT_DBSORTINFO-VALUE.
 ENDIF.
 CLEAR IT_DBSORTINFO.
 READ TABLE IT_DBSORTINFO WITH KEY
 KEY1 = LIT_DBSORTINFO-KEY1
 PARAM = 'SUBTOT'.
 IF SY-SUBRC = 0.
 LW_SUBTOT = IT_DBSORTINFO-VALUE.
 ENDIF.
 CLEAR IT_DBSORTINFO.
 READ TABLE IT_DBSORTINFO WITH KEY
 KEY1 = LIT_DBSORTINFO-KEY1
 PARAM = 'COMP'.
 IF SY-SUBRC = 0.
 LW_COMP = IT_DBSORTINFO-VALUE.
 ENDIF.
 CLEAR IT_DBSORTINFO.
 READ TABLE IT_DBSORTINFO WITH KEY
 KEY1 = LIT_DBSORTINFO-KEY1
 PARAM = 'EXPA'.
 IF SY-SUBRC = 0.
 LW_EXPA = IT_DBSORTINFO-VALUE.
 ENDIF.
 CLEAR IT_DBSORTINFO.
 READ TABLE IT_DBSORTINFO WITH KEY
 KEY1 = LIT_DBSORTINFO-KEY1
 PARAM = 'GROUP'.
 IF SY-SUBRC = 0.
 LW_GROUP = IT_DBSORTINFO-VALUE.
 ENDIF.
 LOOP AT IT_ALV_DATA FROM W_LOOP_FROM_EU TO W_LOOP_TO_EU.
 LW_TABIX = SY-TABIX.
 READ TABLE IT_FIELDCAT INTO LW_FIELDCAT WITH KEY
 FIELDNAME = LIT_DBSORTINFO-KEY1.
 IF SY-SUBRC = 0.
 ASSIGN COMPONENT SY-TABIX OF
 STRUCTURE IT_ALV_DATA TO <LFS>.
 IF SY-SUBRC = 0.
 CLEAR LW_CHAR.
 LW_CHAR = <LFS>.
 IF LW_SPOS= 'SPOS'.
 LOGIC Required
 ENDIF.
 ELSEIF LW_OPTION = 'DOWN'.
 LOgic required
 ENDIF.
 ENDIF.
 ENDLOOP.
 ENDLOOP.
regards,
Ajay reddy

Hai,
Let
1)general data
2)all customers
3)company code data
4)sales organization data
are the check box names,Then
Just use the piece of code below:
IF general data = 'X'.
 COUNT = COUNT + 1.
ENDIF.
IF all_customers = 'X'.
 COUNT = COUNT + 1.
ENDIF.
IF company_code_data = 'X'.
 COUNT = COUNT + 1.
ENDIF.
IF sales_organization_data = 'X'.
 COUNT = COUNT + 1.
ENDIF.
Now check whether more than one Check Boxes are selected or not
IF COUNT GT 1.
"* Do the oprations what ever you want here
ENDIF.
Reward points if it helps you.
Regds,
Rama chary.Pammi

Logic for carry forward of previous stock to current period stock.

Hi Experts,
Client is using already MC.9 for see the stock analysis report, however as per there requirement we are exploring BOM as well as fetching quantity from table level as well. in my report I am experiencing difficulty to carry forward previous period closing stock quantity to current period stock quantiy, if there is no received for current period, however the same is happens in MC.9
Could any one tell me what is the logic behind MC.9 which is do carry forward previous period closing stock to current period stock quantity in report.
As per the requirement I am using S031, S032,S033, however unable to get logic for carry forward the previous month stock quantity to current month.
have a requirement of creating a report of showing material stock period wise for each plant in below mention format.
Header 1
Header 2
Header 3
Header 4
LFGJA/LFMON
ROH (MT)
HALB (MT)
FERT (MT)
11.2013
100.000
121.000
121.00
12.2013
50.000
12.000
123.00
01.2014
23.231
.23.234
45.342
02.2014
23.231
34.094
45.098
03.2014
34.098
98.983
00.000
04.2014
00.000
69.093
98.098
05.2014
00.000
89.098
00.000
For Example Break up of ROH material plant wise in below mention format.
LFGJA/LFMON
WERKS
MENGE (MT)
11.2013
P001
30.000
11.2013
P002
50.000
11.2013
P003
20.00
Thanks in advance,
SKN

Hi,
The last period closing stock = current period opening stock. You may get the details from MBEWH and S032 tables. Refer the doc: Material Stock and Valuation History tables - how to read them
Regards,
AKPT

Is there any functionality for AVERAGE in ALV, like do_sum, subtot?

Hi Experts,
In my_alv report, am doing sub/totals for prices, by using do_sum, subtot functions.........fine. But, I need to do/display the AVERAGE value for Discount % column?
Is there any functionality for AVERAGE in ALV, like do_sum, subtot?
thanq

hi
check these links out
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
regards
vijay
reward points if helpful

In MVC, do i need a View or Page with flow logic for POPUP window

Hi All,
I have the below scenario using the MVC pattern.
I have a main view with 3 trays, each tray has two buttons, for example first tray has Create Order button. When I click on this button, I need a popup window to come with a tableview and a button(Create), where I select some rows and click on the button Create to create order.
But as per the MVC pattern I canu2019t call the view (popup) from another view(main view). So should I create a VIEW or PAGE WITH FLOW LOGIC for the popup? .
I need 6 popup to be called from the main view and once the function is done close the popup.
Please suggest me the flow for this scenario.
Cheers,
Srini.

Srini,
1. You can call the view in pop-up because you will be calling the controller using open.window.
Here is the sample code:
method DO_REQUEST .
data:
        li_vw           type ref to   if_bsp_page,
        lv_form_field   type          string,
        li_md           type ref to   zcl_model01.
dispatch_input( ).
li_md ?= get_model( 'm01' ).
lv_form_field = request->get_form_field( 'invoice_create' ).
if lv_form_field is initial.
*------ Request to display main page
    li_vw = create_view( view_name = 'main.htm' ).
    li_vw->set_attribute( name = 'model' value = li_md ).
    call_view( li_vw ).
elseif lv_form_field eq 'true'.
*------ Request to display Invoice page in pop-up
    li_vw = create_view( view_name = 'invoice.htm' ).
    li_vw->set_attribute( name = 'model' value = li_md ).
    call_view( li_vw ).
endif.
endmethod.
Layout:
      function do_Invoice()
      { var s=0; r=1; w=300; h=300; x=screen.width/2;
        x=x-w/2;
        var y=screen.height/4;
        y=y-h/2;
        popUp=window.open('main.do?invoice_create=true','win','width='+ w
        +',height='+ h +', left=' + x +',top='+ y +');
Option2:
Ofcourse you can't bind the model in page becos those are 2 different things. But all you need to do is access the model to get some value. To know how to access the model from Page w/flow logic look at [this link|Passing model reference to a page in a Popup].
Raja
Edited by: Raja Thangamani on Apr 14, 2009 11:22 AM

What is the logic for 2LIS_17_I3HDR to pick a order as completed on time?

Hi, Experts:
I am working on PM using 2LIS_17_I3HDR to load data. In 2LIS_17_I3HDR, there is a field called "orders completed on-time". I am wondering what is the logic for 2LIS_17_I3HDR to identify if an order was completed on time. I would assume it compares some kind of completion/finish date with a planed/schduled comletion/finish date. Would someone please tell me what fields in what table or in transaction IW39 DOES does 2LIS_17_I3HDR use for this?
Many thanks!
Jenny

Hi, Ram:
Thank you for the reply!
The key figure is ZHLAFIH_TGERL (Number of On-time Closed Orders). I saw some SAP programs refering to its component type "DZHLAFIH_TE" too.
Thanks,
Jenny
Edited by: Jenny Chen on Dec 2, 2009 7:53 PM
Edited by: Jenny Chen on Dec 2, 2009 7:55 PM

I am considering buying a new MAC laptop to run LOGIC for composition and band live/recording, but which one is best as I do not want to spend too much money? Does it have a line in and how do you monitor sound? Will I need adaptors and a interface?

Can anybody help?
I am considering buying a new MAC laptop to run LOGIC for composition and band live/recording, but which one is best as I do not want to spend too much money?
Does it have a line in and how do you monitor sound?
Will I need adaptors and an interface?
Also, I am guessing as Logic only runs on MAC surely then they would not the best spec to recommend to run it?
I see all the upgrades as additional memory or a faster process?
Is a retina screen necessary, and why flash based storage against a 1TB hard drive, and a i5 instead of an i7
The main reason for this purchase is to play live and use backing tracks and record found sounds and make creative songs.
I hope you can provide some valuable feedback, as I am a longtime MAC user and see upgrades and changes happen regularly but the most important thing is the songs not the equipment.
I have £500 already and willing to add another 500 to 700 pounds, then software extra.

Can anybody help?
I am considering buying a new MAC laptop to run LOGIC for composition and band live/recording, but which one is best as I do not want to spend too much money?
Does it have a line in and how do you monitor sound?
Will I need adaptors and an interface?
Also, I am guessing as Logic only runs on MAC surely then they would not the best spec to recommend to run it?
I see all the upgrades as additional memory or a faster process?
Is a retina screen necessary, and why flash based storage against a 1TB hard drive, and a i5 instead of an i7
The main reason for this purchase is to play live and use backing tracks and record found sounds and make creative songs.
I hope you can provide some valuable feedback, as I am a longtime MAC user and see upgrades and changes happen regularly but the most important thing is the songs not the equipment.
I have £500 already and willing to add another 500 to 700 pounds, then software extra.

Need a sample program for hierarchial oops ALV report

Hello experts,
                 I Need a sample program for hierarchial oops ALV report.

Hi,
   Check the following sample code...
T A B L E S
tables : ekko.
data definition
types : begin of ty_ekko,
          ebeln type ekko-ebeln,
          lifnr type ekko-lifnr,
          bsart type ekko-bsart,
          aedat type ekko-aedat,
          ernam type ekko-ernam,
        end of ty_ekko.
types : begin of ty_eket,
           ebeln type ekpo-ebeln,
           ebelp type ekpo-ebelp,
           werks type ekpo-werks,
           matnr type ekpo-matnr,
           menge type eket-menge,
           wamng type eket-wamng,
           netpr type ekpo-netpr,
        end of ty_eket.
data : it_ekko type table of ty_ekko,
       it_eket type table of ty_eket.
data: ob_hieralv type ref to cl_salv_hierseq_table.
data: it_binding type salv_t_hierseq_binding,
      is_binding type salv_s_hierseq_binding.
S E L C T O P T I O N S
select-options : s_ebeln for ekko-ebeln.
S T A R T O F S E L E C T I O N
start-of-selection.
select ebeln
       lifnr
       bsart
       aedat
       ernam from ekko
into corresponding fields of table it_ekko
where ebeln in s_ebeln.
if sy-subrc eq 0.
select aebeln aebelp
       awerks amatnr
       bmenge bwamng
       a~netpr from ekpo as a join eket as b
                 on amandt = bmandt
                 and aebeln = bebeln
                 and aebelp = bebelp
               into corresponding fields of table it_eket
              where a~ebeln in s_ebeln.
endif.
is_binding-master = 'EBELN'.
is_binding-slave = 'EBELN'.
append is_binding to it_binding.
*TRY.
call method cl_salv_hierseq_table=>factory
exporting
t_binding_level1_level2 = it_binding
importing
r_hierseq = ob_hieralv
changing
t_table_level1 = it_ekko
t_table_level2 = it_eket .
*CATCH cx_salv_data_error .
*CATCH cx_salv_not_found .
*ENDTRY.
call method ob_hieralv->display( ).
Cheers,
Ram

User command for checkbox in alv grid output

Hi,
Does anyone knows the user command for checkbox in alv grid display. My requirement is to have a column for checkbox in alv output. When the user checks the checkbox, a pop-up dialog box will appear. This dialog box was created in screen painter. I can't find the user command for this. Please help.
Thanks in advance.

Hi,
there r two ways for creating checkbox col on the ALV grid.
1.) take an extra field in your internal table i.e
data:
checkbox type c.
loop at internal_table into wa.
checkbox.
endloop.
or
the fieldcatalog attribute
2.) wa_fcat-checkbox = 'X'.
append wa_fcat to t_fcat.
clear wa_fcat.
if itab-checkbox = 'X'.
call screen <dialogbox screen number>.
endif.
regards
ravi

Logic for making ASN as an attachment to a email?

hi all,
can anyone help me trying to write a logic for making the Advanced Shipment Notification as an email attachment after having converted it into pdf format?
I need logic for:
1) Initially converting it into pdf
2) Making the pdf as an attachment and not as a general email content.
Thanks & Regard/Aryan

Dear Aryan,
This conversion to pdf can be done by using program RSTXPDFT4, and for the pdf to be sent as attachment you need to contact your technical team as they will write a script for that, scheduling of the same can also be done.
Reward Points if it helps,
Regards,
N

Where to see the logic for 0FYEAR (SAP Exit)

There is already an SAP exit 0FYEAR. There is a requirement to make ZFYEAR1 just like 0FYEAR. So, i want to see where the code (logic) for 0FYEAR is present so that i can write the the same for my custom variable(ZFYEAR1) in CMOD. Can anyone help me with the name of the program?

Include ZXRSRU01 --> Function Module EXIT_SAPLRRSO_001
or
Search for Function Module RSVAREXIT_ [variable name]
Variable Name = 0FYear

GL A/c numbering logic for chart of accounts BAIN

Hi,
Will any expert pl let mek now What is the GL A/c numbering logic for chart of accounts BAIN (BAIN is standard ch of A/c for India apart from CAIN)?
Regards
Anand

Your question is not clear about numbering logicu2026
First of all the GL Account # are always externally assigned (it can be either numeric and alphanumeric)
The length of GL account is 10 digits. But if you give it as 6 in TC OB13 then
u2022 Numerical account numbers
The system includes zeros to the left of the number
0000001234
u2022 Alpha-numeric account numbers
The system includes zeros to the right of the number
1131DB0000

Logic for Expand/compress icons

Hi all,
iam creating a custom transaction in which if you click on partner row in Partner tab an address dialog box pops up...
(similar to sales order/header/partner tab)
now, i want my window have the same func as the SAp window has but iam having problems in trying to understand what SAP is doing..
My question:
logic for expand/compress icons in the dialog box..
how can i implement the logic for expand/cmpress icons..
if i click on expand, i should see all the fields and if i compress ,all initial fields should compress and if all fields are filled and then u click on compress the icon should disappear(similar to SAP)..
my present logic is not able to switch the expand/compress properly..iam using screen-names for these...i see that SAP is using icons but iam not sure how to do this..
can anyone input..
gretaly appreciate....

Hi Karunya,
I have done something similar on the selection-screen of a Custom Report using text symbols & icons. You can probably try it out.
parameters:
p_cstopn type c no-display.
selection-screen:
pushbutton 1(33) p_pcust user-command cus.
at selection-screen.
Check whether the additional selections screen is open or closed
if p_cstopn = space.
    p_pcust = text-opn.
Make all fields invisible
    loop at screen.
      if screen-group1 = c_customize.
        screen-input = 0.
        screen-invisible = 1.
        modify screen.
      endif.
    endloop.
else.
    p_pcust = text-clo.
endif.
In the text symbols :
use @3S@ Open Additional Selections forTEXT-OPN &
    @3T@ Close Additional Selections for TEXT-CLO
Good Luck,
Suresh Datti

Which are the standard classes for events in ALV and explain each class pls

which are the standard classes for events in ALV and explain each class pls
POINTS WILL BE AWARDED,
REGARDS,
jagrut bharatkumar Shukla

hi,
some links.
www.sapgenie.com
www.abap4u.com
http://help.sap.com/saphelp_nw2004s/helpdata/en/5e/88d440e14f8431e10000000a1550b0/frameset.htm
download the PDF from following link.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVALV/BCSRVALV.pdf
The ALV object Grid methods allow the same functionality as ALV grid report function modules but are displayed within
a screen (dialog program). SAP has provided a suit of programs which demonstrate how to For examples see standard SAP
programs as detailed below:
BCALV_EDIT_01 This report illustrates the simplest case of using an editable/noneditable ALV Grid Control.
BCALV_EDIT_02 This report illustrates how to set chosen cells of an ALV Grid Control editable.
BCALV_EDIT_03 In this example the user may change values of fields SEATSOCC (occupied seats) and/or PLANETYPE.
The report checks the input value(s) semantically and provides protocol messages in case of error
BCALV_EDIT_04 This report illustrates how to add and remove lines to a table using the ALV Grid Control and how to
implement the saving of the new data.
BCALV_EDIT_05 This example shows how to use checkboxes within an ALV Grid Control. You learn:
     (1) how to define a column for editable checkboxes for an attribute of your list
     (2) how to evaluate the checked checkboxes
     (3) how to switch between editable and non-editable checkboxes
BCALV_EDIT_06 This example shows how to define a dropdown listbox for all cells of one column in an editable ALV
Grid Control.
BCALV_EDIT_07 This example shows how to define dropdown listboxes for particular cells of your output table.
BCALV_EDIT_08 This report implements an ALV Grid Control with an application specific F4 help. The following aspects
are dealt with:
     (1) how to replace the standard f4 help
     (2) how to pass the selected value to the ALV Grid Control
     (3) how to build an f4 help, whose value range depend on a value of another cell.
Rgds
Anversha

Logic for FIFO in ALV o/p

Similar Messages

Maybe you are looking for