"Logon Failed" Exception with CR2008 SP1/SP2 on WIN2008 Server

Hi,
we have a problem running our .NET Application on a WIN2008 SP2 server. The code which works fine
with all VISTA / WIN-XP / WIN7 or WIN 2003 OS. producese an exception when running on WIN2008:
CrystalDecisions.CrystalReports.Engine.LogOnException: Fehler bei Anmeldung. ---> System.Runtime.InteropServices.COMException (0x80000000):
Kein Fehler.
   bei CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.VerifyDatabase()
   bei CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.VerifyDatabase()
   bei CrystalDecisions.CrystalReports.Engine.ReportDocument.VerifyDatabase()
   --- Ende der internen Ausnahmestapelüberwachung ---
The problem is absulutely reproducable and occours with evrey report in rh application.
The database is SQL2005.
br
Axel

Easiest way to start to troubleshoot this is to install the CR designer on that server - just as a test. Then try to run the report in the designer. Does it work there? The next easiest way to start to troubleshoot this is to create a one line windows app (crystalreportviewer1.reportsource). Let the report prompt for the logon parameters. Does this win app works? In this way you at least start to determine if this is some runtime issue (CR, db client, etc.) or a permission issue.
Ludek

Similar Messages

Exchange 2010 failing to upgrade to SP1, SP2, or SP3

My host server is running Windows Server 2008 R2 Standard. Currently Exchange 2010 is without any service pack. I initially tried to upgrade to SP1 but that failed with the message below. Thinking that I could perhaps skip to SP2 or even SP3 I attempt that
upgrade and received a similar message though not posted here. The Schema for our domain shows that it is at the Windows Server 2008 R2 level. I am attempting to apply the update using the Enterprise/Schema admin account for our network.
Here is the error message that I receive. This happens after all prereq checks are done and the installation has actually started.
Summary: 15 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:00:04
Organization Preparation
Failed
Error:
The following error was generated when "$error.Clear();
Write-ExchangeSetupLog -Info "Set the default Accepted domain from the default recipient policy";
$defaultEmailAddressPolicy = get-EmailAddressPolicy -Identity:"Default Policy";
$defaultSmtpTemplate = $defaultEmailAddressPolicy.EnabledPrimarySMTPAddressTemplate;
$index = $defaultSmtpTemplate.IndexOf("@");
$eapAuthoritativeDomain = $defaultSmtpTemplate.Substring($index+1);
$defaultDomain = get-accepteddomain | where {$_.DomainName -eq $eapAuthoritativeDomain };
$defaultDomain | set-accepteddomain -MakeDefault:$true;
Write-ExchangeSetupLog -Info "Default domain $defaultDomain";
" was run: "The operation couldn't be performed because object 'Default Policy' couldn't be found on 'marvin.intercity.org'.".
The operation couldn't be performed because object 'Default Policy' couldn't be found on 'marvin.intercity.org'.
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&e=m...
Error:
The following error was generated when "$error.Clear();
Write-ExchangeSetupLog -Info "Set the default Accepted domain from the default recipient policy";
$defaultEmailAddressPolicy = get-EmailAddressPolicy -Identity:"Default Policy";
$defaultSmtpTemplate = $defaultEmailAddressPolicy.EnabledPrimarySMTPAddressTemplate;
$index = $defaultSmtpTemplate.IndexOf("@");
$eapAuthoritativeDomain = $defaultSmtpTemplate.Substring($index+1);
$defaultDomain = get-accepteddomain | where {$_.DomainName -eq $eapAuthoritativeDomain };
$defaultDomain | set-accepteddomain -MakeDefault:$true;
Write-ExchangeSetupLog -Info "Default domain $defaultDomain";
" was run: "You cannot call a method on a null-valued expression.".
You cannot call a method on a null-valued expression.
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&e=m...
Error:
The following error was generated when "$error.Clear();
Write-ExchangeSetupLog -Info "Set the default Accepted domain from the default recipient policy";
$defaultEmailAddressPolicy = get-EmailAddressPolicy -Identity:"Default Policy";
$defaultSmtpTemplate = $defaultEmailAddressPolicy.EnabledPrimarySMTPAddressTemplate;
$index = $defaultSmtpTemplate.IndexOf("@");
$eapAuthoritativeDomain = $defaultSmtpTemplate.Substring($index+1);
$defaultDomain = get-accepteddomain | where {$_.DomainName -eq $eapAuthoritativeDomain };
$defaultDomain | set-accepteddomain -MakeDefault:$true;
Write-ExchangeSetupLog -Info "Default domain $defaultDomain";
" was run: "You cannot call a method on a null-valued expression.".
You cannot call a method on a null-valued expression.
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&e=m...
Error:
The following error was generated when "$error.Clear();
Write-ExchangeSetupLog -Info "Set the default Accepted domain from the default recipient policy";
$defaultEmailAddressPolicy = get-EmailAddressPolicy -Identity:"Default Policy";
$defaultSmtpTemplate = $defaultEmailAddressPolicy.EnabledPrimarySMTPAddressTemplate;
$index = $defaultSmtpTemplate.IndexOf("@");
$eapAuthoritativeDomain = $defaultSmtpTemplate.Substring($index+1);
$defaultDomain = get-accepteddomain | where {$_.DomainName -eq $eapAuthoritativeDomain };
$defaultDomain | set-accepteddomain -MakeDefault:$true;
Write-ExchangeSetupLog -Info "Default domain $defaultDomain";
" was run: "Cannot bind argument to parameter 'Identity' because it is null.".
Cannot bind argument to parameter 'Identity' because it is null.
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&e=m...
Elapsed Time: 00:00:04
Preparing Setup
Cancelled
Stopping Services
Cancelled
Languages
Cancelled
Remove Exchange Files
Cancelled
Preparing Files
Cancelled
Copy Exchange Files
Cancelled
Language Files
Cancelled
Restoring services
Cancelled
Languages
Cancelled
Hub Transport Role
Cancelled
Client Access Role
Cancelled
Mailbox Role
Cancelled
Management Tools
Cancelled
Finalizing Setup
Cancelled

Agreed - check the default email address policy is not corrupt and same for remote domains - did you make ay modifications to them?
Since he is running this as das Uber-admin, it will prep Exchange schema and AD even if not explicitly done prior. Exchange setup is helpful like that, well some times....
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Getting the "401 : Unauthorized" exception with bulk edit tool in Project Server 2010

Hi all,
We are using the Bulkedit tool in our Project server 2010 environment.
When users click the button "bulk edit projects" from the ribbon, it is giving the error with a correlation id.
I checked the id in uls logs and find that it is giving the below message.
Does anyone know why we are getting this error ?
Best Regards
Anil Kumar Alladi

Hi Paul,
Thanks for your reply.
The loopbackcheck was already disabled. The users who are accessing the url from the client machines also getting this error.
Best Regards
Anil Kumar Alladi

Database Logon Failed after first report

I have a Windows Server 2003 x86 server running IIS6 and ASP.NET. On this server, I have two different web forms set up to export Crystal Reports to PDF.
My problem is that only one of these reports can run. For example, I open report 1 and can then reopen (generate PDF of) report1 as many times as I want. I cannot open report 2 - I get a "Database Logon Failed" error message. If I restart the server, I can generate a PDF of report 2 successfully and as many times as I want but report 1 will get a "Database Logon Failed" error message.
Has anyone seen this behavior before? My code is very concise and manually closes the report document (and forces the garbage collection to run) once the PDF has been generated. However, for some reason, the report is staying in memory and is trying to run again even though it has been closed. It is driving me crazy.
Thanks in advance for any assistance you can offer.

Let's get the server confusion out of the way.
A "server" runtime install is an msi file called CrystalReports11_5_NET_2005.msi.
The msi is in a download called Crystal Reports XI Release 2 - FP x.x .NET Server Install (where x.x refers to SP or FP version (e.g.; Crystal Reports XI Release 2 - FP 5.6 .NET Server Install)
So, this gives you an easy way of installing the CR runtime on a server (e.g.. Win 2003 server). No CR server (RAS) implication here. To install the runtime, all you have to do is run the msi, provide the keycode when prompted and the runtime is installed. You should see the directory C:\Program Files\Business Objects\Common\3.5\bin created. No pretty interface, etc. If you want a pretty interface, you create your own setup project or msi using the CR msm files.
Hopefully this clears up the "server" confusion.
To the actual issue on hand.
You say this works with older "Crystal Reports viewers" installed on a WIN 2003 64 bit server. My question is; does this CR XI r2 based app work anywhere? Your dev box? Staging server?
Ludek

Authentication Failed Exception while reading mail using POP

Hi,
I am using POP3 for reading mails from mail id. When I try to read the mail from Microsoft Exchange server 2007, it is a success. But same code is giving "Authentication Failed Exception" with Microsoft Exchange server 2010.
One more difference, I figured out. Microsoft Exchange server 2007 is having NTLM as LoginType and code works fine with it. Where as Microsoft Exchange server 2010 is having TLS as LoginType and code is giving "Authentication Failed Exception".
Line of code which is giving exception is...
store = session.getStore(providerPOP3);
store.connect(host, user, password); //throws exception
Please advice how this code can work with Microsoft Exchange server 2010 having TLS as LoginType.
Regards,

Thanks for your reply.
Yes, I am using javamail 1.4.3. My code is working fine with Exchange server 2007 having NTLM.
But when I changed the credentials as per mail id configured on Exchange Server 2010 having TLS support, it did not work. Can you please help what code change would be required to read mails from mail id configured on Exchage Server 2010 having TLS support.
Sorry, if my point seems not understandable as I am as new with these terminologies (mail server and all) as baby with world. :)
Thanks for supprt.

Hyperion 6.1 with Windows 2003 SP2?

We are trying to upgrade our production servers from windows 2003 SP1 - SP2. These server have Hyperion 6.1 installed on them. I just wanted to know if this would have any impact this version of Hyperion. I personally wouldn't have thought so but I just wanted to check.

Its certified on 2003 SP2 as well.

SP2 for SQL Server 2012 with SP1 is failed with Error result: -2067529723

SP2 for SQL Server 2012 with SP1 is failed when start the installtion from command prompt and thorws below errors in Passive node of the cluster.No other errors logged in eventviewer, temp folder and not created any log files in bootstarp folder.An error occurred during the SQL Server 2012 Setup operation.
Error result: -2067529723
Result facility code: 1220
Result error code: 5
For more information, review SQL Server 2012 Setup logs in your temp folder.It is not allowing to run the sql core setup to uninstall the cluster node and gives same error.Can any one got into the same issue and please help?ThanksPetchikumar

Hi,
Can you post summary.txt below link will help you locate it
https://msdn.microsoft.com/en-us/library/ms143702%28v=sql.110%29.aspx
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Logon failed with an Access Database

Hello,
I am trying to create a Crystal Reports application that allows the user to view previously created reports (.rpt files). When I use a .rpt file that has a absolute path for the access database files, it works perfectly. If I use a .rpt file that uses a relative path (i.e. set the database location in the report to 'same as report') the report prompts me to enter the logon information. If I cancel those dialogs, I get a logon failed error.
The application copies the .rpt files and access database files and places them in a specific directory.
I know, for a fact, that the reports work in another program and in the Crystal Reports designer. I just don't know why I get this error with this application.
I am using Crystal Reports XI to create the reports.
The databases are created using Access 95 (I cannot change this)
The development computer is Windows 7 64bit
The IDE is Visual Studio 2008 SP1
The .net language is C#
Any help would be greatly appreciated.

Well, that did allow me to set the location. I am recieving one error when I do that though. I believe that it has to do with the fact that the file extension for one of the databases doesn't end with the default .mdb. I solved this, but then I get an error when trying to load a specific report:
Failed to load database: 0xce0
Invalid Join Operation
Would this be due to the change in the databas name? I wouldn't think so but I want to be sure. Other reports work perfectly (of course, the report with the error is the important one!). And the report that gives the error works in the designer and other applications as well.
Please let me know if I need to start a new thread on this.

CR2008 rt on IIS 6: COMException (0x8004100f): Database logon failed

I have installed the CR 2008 runtime msi on IIS6. It's the initial CR 2008 runtime - not sp0.
Database = MS SQL Server 2000
Connectivity= OLEDB
On the first run all the reports run ok.
If I refresh the page in the browser, all the reports run ok.
Once the report is displayed, all the reports except one fail when the user clicks on a drill down or changes the zoom.
Here is the error:
Database logon failed.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Runtime.InteropServices.COMException: Database logon failed.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[COMException (0x8004100f): Database logon failed.]
   CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.FindGroup(FindGroupRequestContext pFindGroupRequestContext) +0
   CrystalDecisions.ReportSource.EromReportSourceBase.FindGroup(FindGroupContext reqContext) +328
[LogOnException: Database logon failed.]
   CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e) +687
   CrystalDecisions.ReportSource.EromReportSourceBase.HandleException(Exception exception) +108
   CrystalDecisions.ReportSource.EromReportSourceBase.FindGroup(FindGroupContext reqContext) +343
   CrystalDecisions.CrystalReports.Engine.FormatEngine.FindGroup(FindGroupContext reqContext) +44
   CrystalDecisions.ReportSource.LocalReportSourceBase.FindGroup(FindGroupContext reqContext) +133
   CrystalDecisions.Web.ReportAgent.FindGroup(Int32[] groupPath) +112
   CrystalDecisions.Web.GroupTree.HandleGroupTreeNavigate(String groupPath, String drillName) +40
   CrystalDecisions.Web.GroupTree.HandlePostBackEvent(JsonObject jsonEventArgs) +70
   CrystalDecisions.Web.ReportAlbum.HandlePostBackEvents(JsonObject jsonEventArgs) +47
   CrystalDecisions.Web.CrystalReportViewer.RaisePostBackEvent(String eventArgument) +449
   System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
   System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +174
   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
On a side note: The BusinessObjects logo has been disabled in the aspx script. But the report that runs ok, once it has been zoomed it shows the logo on the second run and in the subsequent runs. It's almost like there is a new aspx session created. The difference between the report that runs an the others is the database connection which is dfined as (local) while for the reports that fail the database connection is defined via the server name.

I'm not sure why you'd install the "initial CR 2008 runtime - not sp0"? I would highly recommend installing SP 0 which can be downloaded from here:
https://smpdl.sap-ag.de/~sapidp/012002523100005985842008E/cr120_mm.zip
MSI is here:
https://smpdl.sap-ag.de/~sapidp/012002523100005985862008E/cr120_redist_install.zip
However, there are a lot of assumptions we're making here, the biggest one being that the app works on your development computer and you get the issue once you deploy the runtime(?). Anotehr assumption is that you are working with CR 2008 SP 0 on your dev computer.
Ludek

Pls Help Out: Exception Details: CrystalDecisions.CrystalReports.Engine.LogOnException: Logon failed.

Post Author: olabisi
CA Forum: .NET
Hello All,
i am working on a project and try to come up with a report using crystal report that is embedded with vs 2003.net and the following error was generated.
this is the error in detail:
Server Error in '/BISI' Application.
Logon failed.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: CrystalDecisions.CrystalReports.Engine.LogOnException: Logon failed.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[LogOnException: Logon failed.]
    . I(String   , EngineExceptionErrorID   )
    . D(Int16   , Int32   )
    . C(Int16   )
   CrystalDecisions.CrystalReports.Engine.FormatEngine.GetLastPageNumber(ReportPageRequestContext reqContext)
   CrystalDecisions.ReportSource.LocalReportSourceBase.GetLastPageNumber(ReportPageRequestContext reqContext)
   CrystalDecisions.Web.ReportAgent.get_LastPageNumber()
   CrystalDecisions.Web.ReportAgent.u(Boolean n)
   CrystalDecisions.Web.CrystalReportViewer.OnPreRender(EventArgs e)
   System.Web.UI.Control.PreRenderRecursiveInternal()
   System.Web.UI.Control.PreRenderRecursiveInternal()
   System.Web.UI.Control.PreRenderRecursiveInternal()
   System.Web.UI.Page.ProcessRequestMain()
Version Information: Microsoft .NET Framework Version:1.1.4322.573; ASP.NET Version:1.1.4322.573
Note: this report has a main report that have three subreport in it. It was working fine until i added the third sub report to the main form.I will be glad if a solution could come up fast. This is my email : [email protected] or [email protected]
Jacobs

Post Author: mewdied
CA Forum: .NET
You need to make sure that you are passing the database logon code to the third sub-report correctly. If you are currently only passing database logon to the main report, it may be that the other two subreports are using the same connection as the main, but the third one is using something different.

Getting Logon Failed error connecting to SAP R/3 with Crystal

I have Crystal Reports 2008 and also the SAP Integration Kit installed on my desktop. I've imported the transports into my DEV and QAS systems and am trying to connect directly to R/3 from Crystal using the SAP Table, Cluster or Function choice.
I receive the error:
Logon failed. Details: You do not have the necessary rights to design reports against the SAP system. Please check with your system administrator.
I'm using a logon that has full rights within SAP. It recognizes my password because when I try a password that I know is wrong I get a different error message: Logon failed. Detail: Name or password is incorrect. I receive the same error in PRD even though I have not imported the transports into that client.
I have Crystal Server but am not trying to use that at the moment. Just Crystal Reports as a standalone product. If I've left something out please let me know.
Thank you,
Kevin Scheeler

Hi Kevin,
take a look at the Installation Guide for the SAP Integration Kit which includes a detailed list of authorizations per use case in the appendix
the documentation is available on help.sap.com
Ingo Hilgefort

RFC logon failed with message: Failed: Connect to SAP gateway failed

I installed CI instance fine and i am stopped here with this error at the end of DB instance install. Could someone let me know what could be the reason for this. Is there any fix or workaround to continue the install.
INFO       2006-09-16 01:13:02 [iaxxrfcimp.cpp:398]
          CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value hostSAP.
INFO       2006-09-16 01:13:02 [iaxxrfcimp.cpp:398]
          CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 09.
INFO       2006-09-16 01:13:02 [iaxxrfcimp.cpp:543]
          CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
ERROR      2006-09-16 01:13:02 [iaxxrfcimp.cpp:450]
          CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
ERROR      2006-09-16 01:13:02
          CJSlibModule::writeError_impl()
FRF-00063 RFC logon failed with message: Failed: Connect to SAP gateway failed
Connect_PM GWHOST=hostSAP, GWSERV=sapgw09, ASHOST=hostSAP, SYSNR=09
LOCATION    CPIC (TCP/IP) on local host
ERROR       partner not reached (host hostSAP, service 3309)
TIME        Sat Sep 16 01:13:02 2006
RELEASE     640
COMPONENT   NI (network interface)
VERSION     37
RC          -10
MODULE      nixxi_r_mt.cpp
LINE        8528
DETAIL      NiPConnect
SYSTEM CALL connect
ERRNO       146
ERRNO TEXT Connection refused
COUNTER     4
Thanks,
Ram

at the end of the database instance installation SAPInst is doing some RFCs to the CI.
The logfile states that the gateway on host hostSAP with the systemnumber 09 is not reachable.
Please check if you have started the central instance on this machine.
peter

FRF-00063 RFC logon failed with message: Failed: Connect to SAP gateway fa

We are getting below error while installing CRM 4.1 on oralce,sunsolaris.
ERROR      2007-09-27 01:19:46
           CJSlibModule::writeError_impl()
FRF-00063 RFC logon failed with message: Failed: Connect to SAP gateway failed
Connect_PM GWHOST=uapkb2dh, GWSERV=sapgw29, ASHOST=uapkb2dh, SYSNR=29
LOCATION    CPIC (TCP/IP) on local host
ERROR       partner not reached (host uapkb2dh, service 3329)
TIME        Thu Sep 27 01:19:46 2007
RELEASE     640
COMPONENT   NI (network interface)
VERSION     37
RC          -10
MODULE      nixxi_r_mt.cpp
LINE        8642
DETAIL      NiPConnect
SYSTEM CALL connect
ERRNO       146
ERRNO TEXT Connection refused
COUNTER     2
Regards,
Madhu.

We are getting below error while installing CRM 4.1 on oralce,sunsolaris.
ERROR      2007-09-27 01:19:46
           CJSlibModule::writeError_impl()
FRF-00063 RFC logon failed with message: Failed: Connect to SAP gateway failed
Connect_PM GWHOST=uapkb2dh, GWSERV=sapgw29, ASHOST=uapkb2dh, SYSNR=29
LOCATION    CPIC (TCP/IP) on local host
ERROR       partner not reached (host uapkb2dh, service 3329)
TIME        Thu Sep 27 01:19:46 2007
RELEASE     640
COMPONENT   NI (network interface)
VERSION     37
RC          -10
MODULE      nixxi_r_mt.cpp
LINE        8642
DETAIL      NiPConnect
SYSTEM CALL connect
ERRNO       146
ERRNO TEXT Connection refused
COUNTER     2
Regards,
Madhu.

Logon failed, with some Chinese description

Dears,
We are running the SAP Crystal Reports 2011 client (on a Windows PC) to
built reports on DB tables residing on ERP ECC 6.0 EhP5 system,
installed on IBM Power System i V7R1.
Going through the necessary steps after starting the Crystal Reports
client :
Report Wizard -> Create New Connection -> SAP Table, Cluster, or
Function, I get a list of all the SAP systems, which are configured in
the conventional SAP GUI installed on the Windows PC (730, patch level 1).
After choosing the ERP PRO system for example, I receive a dialog
through which I enter the client no., user & password.
When I click the 'Finish' button, I get a dialog depicting two lines :
The first line = 'Logon failed.'
The second line = 'Details:...' then a sequence of some Chinese (I
asssume) characters !
Kindly advise on how to solve this problem.
(Note : please find below a screen shot depicting the last dialog encountered.)
Thank you in advance for your cooperation.
Regards.
Reda

Dears,
The following is the solution for the above mentioned problem :
Right Click on the entry of interest among the list of entries in SAP GUI, select 'Properties', click the 'Code Page' tab, select the 'Default' option in the drop down list labeled : 'Language'
( The previous option chosen in the drop down list was 'English')
Thanks.
Reda

Database logon failed when opening report with parameter values in CrystalReportViewer

Hi,
I designed 2 crystal reports: report A contains parameter fields and report B did not contain any parameter
I can open both reports in development site using CrystalReportViewer control. When I open the reports in testing site,
I can open report B but can't open report A. It display error message "Database logon failed". When I set EnableDatabaseLogonPrompt
to true and try to open the report A again, it shows database connection data which was created on report.
In addition, it is strange that it displays error "Database logon failed" when I click an item in group tree panel of the report B. This indicates that it can load data from database
in testing site but it connect to development database when clicking items in group tree panel
All reports connect to database using Windows Authenication. It use dynamic database connection at runtime
How to ensure the report always connect database using login data dynamically at runtime?
Below is my code about database connection:
string strServerName = null;
string strDatabaseName = null;
ReportDocument rptDoc = new ReportDocument();
rptDoc.Load(strFilePath);
ConnectionInfo connInfo = new ConnectionInfo();
TableLogOnInfo logonInfo;
for (int i = 0; i < rptDoc.Database.Tables.Count; i++)
logonInfo = rptDoc.Database.Tables[i].LogOnInfo;
ReportHelper.GetReportConnection(ref strServerName, ref strDatabaseName, strSystemType);
logonInfo.ConnectionInfo.ServerName = strServerName;
logonInfo.ConnectionInfo.DatabaseName = strDatabaseName;
logonInfo.ConnectionInfo.IntegratedSecurity = true;
rptDoc.Database.Tables[i].ApplyLogOnInfo(logonInfo);
rptDoc.Database.Tables[i].Location = rptDoc.Database.Tables[i].Location.Substring(0, rptDoc.Database.Tables[i].Location.Length - 2);
crvViewer.ReportSource = rptDoc;
crvViewer.DataBind();
Development environment:
- SAP Crystal Reports 2013 Support Pack 1
- Visual Studio Professional 2012
- .NET Framework 3.5
- DDL
CrystalDecisions.Shared (v 13.0.8.1216)
CrystalDecisions.Web (v 13.0.8.1216)
CrystalDecisions.CrystalReports.Engine (v 13.0.8.1216)
Database connection in crystal report:
- Database Type: OLEDB (ADO)
- Provider: SQLOLEDB
- Integrated Security: True
Thanks and Regards,
Tony

Hi Tonylck
Try to pass login info to crystal report dynamically as follows:
using System;
using System.Windows.Forms;
using CrystalDecisions.CrystalReports.Engine;
using CrystalDecisions.Shared;
namespace WindowsApplication1
public partial class Form1 : Form
public Form1()
InitializeComponent();
private void button1_Click(object sender, EventArgs e)
ReportDocument cryRpt = new ReportDocument();
TableLogOnInfos crtableLogoninfos = new TableLogOnInfos();
TableLogOnInfo crtableLogoninfo = new TableLogOnInfo();
ConnectionInfo crConnectionInfo = new ConnectionInfo();
Tables CrTables ;
cryRpt.Load("PUT CRYSTAL REPORT PATH HERE\CrystalReport1.rpt");
crConnectionInfo.ServerName = "YOUR SERVER NAME";
crConnectionInfo.DatabaseName = "YOUR DATABASE NAME";
crConnectionInfo.UserID = "YOUR DATABASE USERNAME";
crConnectionInfo.Password = "YOUR DATABASE PASSWORD";
CrTables = cryRpt.Database.Tables ;
foreach (CrystalDecisions.CrystalReports.Engine.Table CrTable in CrTables)
crtableLogoninfo = CrTable.LogOnInfo;
crtableLogoninfo.ConnectionInfo = crConnectionInfo;
CrTable.ApplyLogOnInfo(crtableLogoninfo);
crystalReportViewer1.ReportSource = cryRpt;
crystalReportViewer1.Refresh();
Ref
http://csharp.net-informations.com/crystal-reports/csharp-crystal-reports-dynamic-login.htm
Mark as answer if you find it useful
Shridhar J Joshi Thanks a lot

"Logon Failed" Exception with CR2008 SP1/SP2 on WIN2008 Server

Similar Messages

Maybe you are looking for