MacBookPro SSD Error- ALERT: The partition map needs to be repaired because there's a problem with the EFI system partition's file system.
MacBook Pro OS x Mavericks. I have Sandisk 256GB SSD and I am getting a below error message.
ALERT: The partition map needs to be repaired because there's a problem with the EFI system partition's file system.
Does anyone know how to resolve this error and fix it ? unfortunately I don't have a Time Machine backup. Thanks!
Have you tried to run the verify/repair permissions and verify/repair disk through the recovery disk? If that didn't work then I would reinstall the OS after backing up. If that still doesn't work I would take it in.
Similar Messages
-
Why the Apple Store billed me with the purchase from City Ville that didn't go through because they have problem with the server,
This is happening to me too. I'm looking for anyway to fix this its getting very annoying not being able to update apps.
-
I cannot import my vCard to iCloud...it shows error.."1 contact could not be imported because there was a problem reading the vCard"
The vCard must not be a compatible format. (Unfortunately, there are multiple formats.)
Often your carrier can transfer contacts between devices from different manufacturers. Try visiting your carrier's retail outlet and see if they can do this for you. -
I refurbished my macbook air 7 months ago because there was a problem with the steady state drive. Now my battery seems to be dead again. How long does the warranty last? Do I need to pay for a new battery?
As I wrote Apple will diagnose an Apple product even if it is out of warranty for free. That should be your first step to find out if the problem is the battery or something else.
Once you have Apple telling you a 7 month old battery is defective (if that turns out to be the case) then it becomes a game of horse trading. You'll need to speak to the tech and when he tells you there is nothing he can do you will need to speak to the tech manager and when she says most likely there is nothing they can do you go to the store manager, etc. It is unlikely (though possible) that they will give in easily you need to be firm, polite and let on that you're willing to accept a partial reimbursement.
So again the first step is to find out what is wrong.
good luck -
why cant i rotate and save a picture from iphone 4s in windows photo viewer windows 7? the error is cannot save because there is a problem with the photo properties. I can rotate and save screenshots
Windows do not repect the digital EXIF specification. Use a free viewer http://www.irfanview.net/ for Windows.
-
Hardware Information:
MacBook Pro - model: MacBookPro6,2
1 2.66 GHz Intel Core i7 CPU: 2 cores
4 GB RAM
Video Information:
NVIDIA GeForce GT 330M - VRAM: 512 MB
Intel HD Graphics - VRAM: 288 MB
Startup Items:
HP Trap Monitor - Path: /Library/StartupItems/HP Trap Monitor
System Software:
Mac OS X 10.6.8 (10K549) - Uptime: up 0:0:48:37
Disk Information:
TOSHIBA MK5055GSXF disk0 : (465.76 GB)
(null) (disk0s1) <not mounted>: 200 MB
MacBook Pro HD (disk0s2) /: 465.44 GB (440.47 GB free)
MATSHITADVD-R UJ-898
Have tried…
re-setting Time Capsule (soft and hard) and power disconnect
re-setting modem
changing passwords in all relative locations
deleteing file://localhost/Library/Preferences/com.apple.TimeMachine.plist
deleteing all mention of Time Capsule in Keychain Access
running KeyChain First Aid (no problem found)
Restarting computer
Time Capsule has a green light, other MacBook Pro backs up OK but this machine continues to receive above error message and will not Enter Time Machine producing the error message Your Time Machine backup disk can’t be found. Maybe I need to do something over or in a particular order? All help is appreciated!With the TC plugged by ethernet into the computer.. still in full isolation to the network and with factory reset.. you can do another to be sure.
Please open the network preferences.. and check the IP the ethernet is getting from the TC.
It should be 10.0.1.2
I set it to this manually
Don't worry about all the rest.
If you open airport utility can it see the TC?
YES
If not then I think you have a major network issue on the computer.
Assuming you can see the TC in airport utility.. go to manual setup and the disk tab. Does the disk register any issues.. SMART should show it has verified.
Shows verified
Now go to finder..
Mount the drive manually via the top menu.. Go.. Connect to server.
And type in the address.. SMB://10.0.1.1
Did NOT work, however 10.0.1.2 did
That should discover the drive and ask you for credentials which after a factory reset will just be public as the password. The drive should mount and you can then see it in finder.
Yes, but I have been able to do this with the IP address being set automatically
I would deliberately use SMB. The other alternative is AFP://10.0.1.1 but that seems to be more problematic at times..
Once mounted point TM to the drive and see if it can find it and start the backup.. if it fails I think you have need to use the A5 in pondini's troubleshooting and see what you can do.
It failed and A5 makes NO difference.
A drive that won't mount is obviously not going to work.
Pondini is welcome to make comments... sometimes my Mac terminology gets a bit loose.. !! My recent convert status is visible .. !!
My other solutions.. since these are fairly old products.. the TC is more than 3years in all likelihood so outside warranty.. get a USB drive and plug it into the Mac and use TM to backup to that. If that works.. I would erase the hard disk in the TC and start over with both computers.. you will need to backup the other computer before you erase of course. Erasing and starting over does seem to help.
If there are no other suggestions, I guess I will try erasing and starting over. Thank you both for ALL your advice. -
I had Microsoft 2011 installed on my macbook, and my macbook had crashed recently. Luckily I had backed up my drive before. After fixing it i tried to restore my files and when i tried using microsoft office i was given the before mentioned error message. Unfortunately I had misplaced my office box when moving and so I don't have the CD or reg key. I also tried copying the app from my brothers macbook, but i still go the same error message. Is there any alternative way.
Office usually can't be restored intact without a good activation key. The only thing that I can advise is getting in touch with Microsoft to see if they can retrieve the key for you.
When you get the key, you can download a digital, dmg file of Office.
Good luck,
Clinton
MacBook Pro (15-inch Late 2011), OS X Mavericks 10.9.5, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display -
I am trying to download FREE apps but I can't download any without billing information. Showing up and saying there was a problem with a recent purchase and when I put credit card details it is saying its declined, help? I can't download no apps until this is fixed?
This is happening to me too. I'm looking for anyway to fix this its getting very annoying not being able to update apps.
-
Partition map needs to be repaired - what next?
My iMac Intel ( running Maverick ) has for some time problems starting up - takes for ever and works very slow. When I started from the start up manager to use disk utility I've received following messages.
Live file system repair is not supported
The partition map needs to be repaired because there's a problem with EFI system partition's file system.
What can I do.Have you tried to run the verify/repair permissions and verify/repair disk through the recovery disk? If that didn't work then I would reinstall the OS after backing up. If that still doesn't work I would take it in.
-
How to correct checkout form "there is a problem with the PayPal email address supplied"
PayPal Pro submissions do not go through. The error message reads "We cannot process this transaction because there is a problem with the PayPal email address supplied by the seller."
I called PayPal. They checked and said my checkout form was not sending my email address to them. Any help on getting this to work will be sincerly appreciated. Thank you.- If you want to replace the headphone jack yourself see:
iPod Touch Repair - iFixit
- Apple will only exchange your iPod for a refurbished one for this price, You get a new battery. However, it may not be worth it for a 2G iPod.
Apple - Support - iPod - Repair pricing- A third-party place like this one is less expensive. Google from more places.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens -
iTunes won't upgrade to10.5. I'm on 10.1.17.
When installing 10.5 it terminates with an error message "There is a problem with the Windows installer package. Contact the package vendor".
It does not provide an error code or details/description to further troubleshoot. As a result I can't upgrade my Apple devices to leverage the cloud.
Any smarts out there who could help?
Using PC Win-7 w/IE 7 (should that matter)
Thanks muchI know there's a million threads like this, but I thought I'd record my experience. I, too, was having the original poster's error when I tried to update iTunes on Windows XP. I think I was stuck on 10.
I solved it by un-installing iTunes and every other Apple app. I discovered that Apple Software Update would not un-install as its MSI file could not be found. I used the "Windows Install Cleanup" tool from Microsoft to remove Apple Software Update from the list of installed programs. Google "kb290301" for a Microsoft page that includes a download link for it. After that, I was able to install a fresh copy of iTunes 10.5.2.
I'm not sure why this app's folder and MSI were missing from my computer. I had once used Laplink PC Mover to move everything from my old computer to this one, and perhaps it missed a bit. -
Hi There,
Need your assistance on the issue that we are facing in prod environment.
We are able to open web console from remote machine and able to view monitoring pane as well as my workplace folders from console . Able to view and access alerts and other folder in the monitoring pane. We are able to view and access My Workplace folder
and able to view the reports in Favorite Reports folder. But when I click on run Report we are getting the below error "500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed."
In our environment we have 3 servers one is SQL server and two are SCOM servers. Please advise how to fix this issue. Do we have to do any thing from SQL End?
Errors: Event ID 21029: Performance data from the OpsMgr connector could not be collected since opening the shared data failed with error "5L".
Event ID 6002 : Performance data from the Health Service could not be collected since opening the shared data failed with error 5L (Access is denied.).
Regards,
Sanjeev KumarDuplicate thread：
http://social.technet.microsoft.com/Forums/en-US/7675113e-49f0-4b3a-932b-4aceb3cfa981/scom-500-internal-server-error-there-is-a-problem-with-the-resource-you-are-looking-for-and-it?forum=operationsmanagerreporting
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
I've been looking to resolve this issue for a while now and was hoping someone could help me understand my options.
We have Exchange 2010 & Outlook 2010 in our environment. I've created a SSL cert for our ActiveSync from a reputable CA and unfortunately, as you may not be surprised, we are seeing an alert each time we open Outlook that states:
"Security Alert; Information you exchange with this site cannot be viewed or changed by others. However, there is a problem with the site's security certificate.
The name on the security certificate is invalid or does not match the name of the site."
Of course my internal server name does not match my external server name. So the SSL I had created for use with OWA and ActiveSync is rejected by my internal Outlook clients.
After doing some research I believe this is related to the Autodiscover service being configured with my internal server name and not my external name.
I've found some info about adding New-AutodiscoverVirtualDirectory and Set-ClientAccessServer commands and then found this article that might help. (Configure
Outlook Anywhere to Use Multiple SSL Certificates) but nothing is specific to my configuration and I'm concerned about what will happen to my existing configuration if this fails.
What happens when you run Set-ClientAccessServer? Does it retain and keep the old server config in place and add a new one or does it wipe it out? Will all of my devices need to be reconfigured?
Same with New-AutodiscoverVirtualDirectory. Does this simply add another virtual directory or is it going to overwrite my existing config?
Then there is the question of whether or not any of this will actually address my issue at all.
absolutezero273cSorry.
"[PS] C:\Windows\system32>Set-ClientAccessServer -Identity MailExt -AutoDiscoverServiceInternalUri "https://MailExt
.contoso.com/autodiscover/autodiscover.xml"
The operation couldn't be performed because object 'MailExt' couldn't be found on 'DomainController2.contoso.local'.
+ CategoryInfo : NotSpecified: (0:Int32) [Set-ClientAccessServer], ManagementObjectNotFoundException
+ FullyQualifiedErrorId : 4D980455,Microsoft.Exchange.Management.SystemConfigurationTasks.SetClientAccessServer"...is the error I get.
I've created the split zones and populated the Forward Lookup Zones as follows:
CONTOSO.COM
MailExt(CNAME)MailInt.contoso.local
_tcp _autodiscover(SRV)MailExt.contoso.com
CONTOSO.LOCAL
MailInt(A)192.168.1.10
MailExt(CNAME)MailInt.contoso.com
One thing I did notice is that there isn't a _tcp _autodiscover entry for MailInt in my Forward Lookup Zones. It was recommended that I make that entry for _tcp _autodiscover(SRV)MailExt.contoso.com in another post I read somewhere.
I believe what I am trying to do is create a new autodiscover object as is shown here:
I see there is a Get-ClientAccessServer & Set-ClientAccessServer command but I need to add a CAS. Does the Set-ClientAccessServer add or simply modify?
Or would that require the New-AutodiscoverVirtualDirectory command? I read
this page that discussed creating new virtual directories but that seemed a little risky without knowing all the ins and outs of how this service functions and to what degree this would affect the existing configuration.
I was able to use the Set-ClientAccessServer command and change the actual internal autodiscoverUri to https://MailExt.contoso.com/autodiscover/autodiscover.xml but the name still says MailInt and I continue to get the SSL cert warnings because it is looking
at MailInt.contoso.local.
absolutezero273c -
Would someone be able to explain to me the following issue with Iphoto?
I ordered 8 same calendars for my soccer team and received them fine. Although a couple of pictures on it are a little off (out of focus). I need to order two more of the same calendars but when I go thru the process ireceive an error message saying:
"Unable to to assemble calendar" There is a problem with the photo with the file name "(Null)" The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your calendar.
How can I fine this "corrupt" photo? How did it go thru with the first batch of calendars but won't go thru now?
Thank you for your help.Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start
with Option #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
There is a problem with the security certificate of the proxy server. Error code 18 and 38.
Hi All,
After several hours and a short night of sleep I'm out of ideas and hopefully someone here can help me trying to solve this one. First of all the situation:
Exchange 2013 on a remote location with a CA-certificate.
Outlook 2010 and 2013 on different locations, locally installed and on RDS.
When I open Outlook on my laptop all is fine, no errors, good sync, no problem. But when I open Outlook on our Remote Desktop Servers with Outlook 2013 I'm getting errors like "There is a problem with the security certificate of the proxy server. The
name on the security certificate is invalid or does not match the name of the site. Outlook is unable to connect to this server. (Error code 18)". Opening Outlook 2010 the message is the same, but the error code now is 38.
After this Outlook opens and is working, there's one more error though. After a while an security warning pops up with the message: "Information you exchange with this site cannot be viewed or changed by others. However, there is a problem with the
site's security certificate. * The security certificate was issued by a company you have not chosen to trust. View the certificate to determine whether you want to trust the certifying authority. * The security certificate is valid. * The name on the security
certificate is invalid or does not match the name of the site."
Strangest thing is, it is the certificate of my RDS! It isn't my valid en officially bought certificate from my mailserver. What's going on? I'm out of options, what I've tried so far (in random order):
- restarting mailserver and AD;
- restarting switches;
- restarting routers;
- restarting RDS, AD and all other servers;
- bypassed proxyserver for RDS;
- created a new profile;
- checked recently installed updates;
- checked certificate on mailserver;
- checked RDS on a different location, working fine.
Nothing helped, what can I do next? Please advice.
Regards.Found a thread that solves half my problem (https://social.technet.microsoft.com/Forums/office/en-US/70d18244-889a-4d95-ac3f-e234672a82b2/there-is-a-problem-with-the-proxy-servers-security-certificate-error-when-starting-outlook?forum=exchangesvrclients).
The first message can be suppressed by adding this to the Exchange config:
set-outlookprovider -Identity EXCH -CertprincipalName msstd:webmail.domain.tld
set-outlookprovider -Identity EXPR -CertprincipalName msstd:webmail.domain.tld
Giving the command get-outlookprovider, gives me empty information regarding the certprinipalname. Filled
this and after recreating the profile or deleting the ost-file I still have the second alert with the local certificate of my RDS.
Not completely where I want to be, any help regarding the second alert is greatly appreciated!
Maybe you are looking for
-
Search Box Error: LockFailedException Illegal hex characters
When I enter any data into the JDeveloper Search Box (top right hand side of the IDE) the IDE throws up an error and wants to exit telling me that the system is unstable. This is a new install of Oracle JDeveloper 11g Release 1 11.1.1.2.0, everything
-
Suddenly I can't search for keywords anymore in library filter. It's gone. I can still find my keyword tags to the right under keywording and keyword list. Were has it gone?
-
Hi Guys, I have a table FOLDER_CUSTOMER which has two columns folder_id and customer_id. We have index on the customer id but the customer_id is in this format '000900000000000000000000035102' which is same for most of the customers except the last 5
-
Standby database not working after reinstallation of oracle in primary DB
Hello All, Initially I had setup primary database (DB1) and Standby database (DB2), for test environment. In DB1 I had got ORA-600 error. So, after I researched, I came to know that I need to apply some patches. But I reinstalled oracle in DB1. And t
-
Z10. The Netherlands. OS 10.3.1.2576 and software 10.3.1.1779. BB World general settings renewed. 'this purchase cannot be completed. Select an other payment method.' code ( AW1006c). I adres beiden PayPal Visa but got the same error. Please help