Mandatory field required in PCUI Account Management
hi gurus,
i am on CRM project with PCUI as front end interphase. my requirement is to have a mandatory field in Account management. for ex i want have First name and Search term to mandatory fields with Red Star(astrich) against these two fileds. for this i tried to control in the field groupings and crmc_blueprint_ct also. but its not working and when i tried to save the account its throwing and errors
"*Enter a value for field Date organization founded", "*
*"Enter a value for field Name 1 of organization"*
*"Enter a value for field Name 2 of organization".*
despite filling all the fields the system is throwing the above errors. so please help me in solving this problem.
Thanks in advance
Hi Nanda Kishore,
All you need to do is, in the field group structure for the fields, the field attribute 'Mandatory' check box has to be checked. Then the field group has to be regenerated.
If you have already done this plz send the URL you are using or the procedure how you are launching the application.
Cheers,
Naveen
Similar Messages
-
Mandatory field FOR SOME PLANTS - batch management - MARC-XCHPF
I know you can force material master fields to be mandatory in SAP. I am not positive that you can force batch management MARC-XCHPF for some of your plants but not all?
plant A - field does not exist
plant B-C - field exists and should always be checked for HALBsyes you can achive that
first check which field selection key is assigned to your plant
then go to tcode OMS9 and select the field selectin key for your plant and then search the batch manag. field and make it required
3 factors affect the field status
1> matrail type field selection key
2>plant field selection key
3>industry sector filed selection key
as your requirement is plant specific then you need to mak ethe batch. filed mandatory using that -
Mandatory fields while using Group chart of accounts
Hi,
Which are the mandatory fields while maintaining GL accounts in FS00 if i am using Group chart of accounts.
And how attached these group chart of accounts gl to the operational chart of account GL.
rajHi,
the assignment from operational chart of accounts to group chart of accounts is done in OB13. Follow the steps in Customizing IMG FIn. Acc. (new) / Consolidation preparation (new) / General specifications / G/L and FS Charts of accounts...
Best regards, Christian -
MB11 552 Mvt Type Cost Center as Mandatory Field,Want to change to optional
Hi
In MB11 552 Mvt Type Cost Center as Mandatory Field, Requirement here is to change the filed to optional.
Whr are the settings?
VijayHi,
Go to OMJJ...then enter MVT 552....Select line for MVT 552 then click on on left hand side you will see Field selection (from 201)/Batch search procedure...Double click on mvt 552...double clik on Additional account assignments---here make cost center as optional.
Cheers
Utsav -
Mandatory fields to create billing document
hi,
Experts
I have an scenario, where in i have to transfer the invoices from non sap to sap tables, ofcourse its is based on the client requirement, but i just want to know what are all the mandatory fields required to post invoices from
non sap to sap. please give me necessary fields.required for above scenario
Thanks
Edited by: Ahmed quadry on Jun 3, 2009 3:20 PM
Edited by: Ahmed quadry on Jun 3, 2009 3:20 PMIncompletion Log functions are available in the not in billing.
a) Sales Order header item and scheduling
b) Delivery header and item
c) Not in billing
Sageer -
Field Profit Ctr is a required field for G/L account -Posting
Hello,
While posting payroll results to FI , I am facing the following error
"Field Profit Ctr is a required field for G/L account "
The Field Profit Center is mandatory from FI side,We can not change it.
I assigned the profit center to Org-Unit using A-OO3 O-PC relationships.Still I am facing the same issue.Kindly Help.
Regards,
AhmedHello
The reason why Profit Center is not filled is that you have activated codist switch in FI but not in the HR side:table T52SWCODIST.
By the way, take into account only value 1 is allowed for India as per note 1039346.
Thanks and Kind Regards
Ramana -
Field Bus. Area is a required field for G/L account 5000 20000500
Dear all,
I bumped into the following error when trying to perform GR-101 in MIGO.
My question is "Do you think the error is due to inconsistency between MM movement type & GL master data. Could it be MM movement type used in the transaction below?
How to make sure business area is a mandatory field for that movement type?
Our company policy is business area is require for all GL master.
Field Bus. Area is a required field for G/L account 5000 20000500
Message no. F5808
Diagnosis
The value for field "Bus. Area" in the interface to Financial Accounting is an initial value but you are required to make an entry in the field selection for G/L account "20000500" in company code "5000" linked to the field selection for posting key "89".
System Response
Error
Procedure
It might be an error in the configuration of the G/L account field selection. The initial application, used to call up the interface must otherwise define a value for field "Bus. Area". If this is the case, contact the consultant responsible for the application used to call up the interface or get in contact with SAP directly.Hi,
Goto T-code -- FS00 there enter your G/L account 20000500 and company code goto the tab---- create/bank/interest
click the field status group and make the radio button for Busines area as optinal and save then try doing MIGO_GR .
Check with your FI team if the field Business area is requried field ...then enter the same manually during grn. -
Field Cost Ctr is a required field for G/L account
HI SAP Guru,
I have Created an Asset in Test server, once the Asset was created..
I did a Depreciation Run in test server.I encounter this error message.
the cost center was created in the asset master, and the GL account was also define in the GL master.
Field Cost Ctr is a required field for G/L account 7xxxxx
Message no. F5808
Diagnosis
The value for field "Cost Ctr" in the interface to Financial Accounting is an initial value but you are required to make an entry in the field selection for G/L account "7xxxxx" in company code "168" linked to the field selection for posting key "40".
System Response
Error
Procedure
It might be an error in the configuration of the G/L account field selection. The initial application, used to call up the interface must otherwise define a value for field "Cost Ctr". If this is the case, contact the consultant responsible for the application used to call up the interface or get in contact with SAP directly.
Please adviseHi
Please Check field status group assigned to the depreciation G/l account as well as G/L account of Asset by using Transaction Code OBC4
Make the cost center as optional instead of mandatory
Check your settings in Transation code ACSET
Regards
Praveen P C -
Field Pers.No. is a required field for G/L account cocode glcode
Hi,
We got error message
Field Pers.No. is a required field for G/L account <cocode> <glcode>
while our application was trying to do Goods Receipt in SAP.
I understand this error message is because this setting of this G/L account requires the "personnel number" to be mandatory.
But could you advise where to enter the "personnel number" while doing the Goods receipt or the invoice receipt?
thank you very much in advance for your help!thank you, both.
Actually, this error happened while the user was creating "Goods Receipt" in SAP through BAPI call.
Our application is a "Procurement to Pay" web application, it calls BAPI to create PO, create Goods Receipt, etc. -
Field Text is a required field for G/L account (VF02 release to accounting)
Hi gurus,
the following error message shows in VF02 when releasing to accounting:
"Field Text is a required field for G/L account in E178 (=CoCd) 4420000000".
We checked the G/L master (FSS0) - information tab - G/L Account texts in Company Code (for G/L 442*) but did not work. Any idea of which text is to be maintained?
Thanks,
VLhi,
this is to inform you that,
in SPRO - financial accounting - g/l accounting - master data - g/l accounts - preparations - addational activities - define screen layout for each transaction.
or
OB26.
make the field text mandatory and fill the data in it.
confirm
balajia -
Error: "Field Material is a required field for G/L account 3862 21201000".
We are trying to post and Rack purchase Invoice using "BAPI_INCOMINGINVOICE_CREATE" but the BAPI fails and the error message that we are getting is "Field Material is a required field for G/L account 3862 21201000". We checked the GLACCOUNT data that is getting passed into the BAPI but there is no material field available in the structure. Even posting online using MIRO returns the same error.
Just to give you a quick background on the issue with MATNR. The automatic posting is generating an entry to account 21201000, which is set to require MATNR on the GLACCOUNT posting details. Online in core MIRO the MATNR field does not show up, but you can set the screen variant to allow it to show and therefore enter a value, however, even if you do this if you attempt to cancel the invoice with standard TCode MR8M it again fails because the MATNR is not carried through to posting. There are a couple of OSS notes that relate to this issue, but we are not sure if it will solve our problem. We need to be able to pass a value in MATNR for GLACCOUNTDATA (not MATERIALDATA) so the posting can be effected.
Please let me know if anybody has come acroos this issue and a way to resolve. Any kind of help will be appreciated.Hi
Run the program RM07CUFA
in SE38 Tcode and check the inconsistencies.
Also in FS00 go to details of the GL account and double click on field status group under create bank interest tab and then double click material management/additional assignments.
You can see the required or suppressed fields -
Message No F5808 Field Assign. is a required field for G/L Account.
Hi Guys,
I have a problem when releasing a cancel credit memo billing document.
It shows the following error message:
Field Assign. is a required field for G/L Account.
Message No. F5808
Diagnosis,
The value field "Assign." in the interface to Financial Accounting is an initial value but you are required to make an entry in the field selection for G/L Account XXXX in company code XXXX linked to the field selection for posting key "50".
System Response
Error
Procedure
It might be an error in the configuration of the G/L account field selection. The initial application, used to call up the interface must otherwise define a value for field "Assign.". If this is the case, contact the consultant responsible for the application.Hi,
The Assignment Number BSEG-ZUONR (I suppose "Assign." means it here.) field status for posting key and GL is optional and mandatory.
I think the GL Account SORT KEY in FS00 is the assignment selection for Billing to FI doc. Say if the SORT KEY is Posting Date, the assignment from Billing to FI Doc would be the date of posting.
But if the SORT KEY is blank ( This is case for my G/L account), the system will select the assignment written in Billing document header (VBRK-ZUONR).
I checked other billing documents, which are not in the same billing type as the one with error, and found it follow the above logic.
So how come this time it shows the above error? Really confused.
Emma
Edited by: qun yang on Sep 22, 2011 9:12 AM -
How to disable fields in BP-ACCOUNT MANAGEMENT based on a condition in UI
Hi
Good Day
I have a requirement wherein I need to disable few fields in'General Data" and "Main Address and Communication Data"
in "Account Management" while changing the "Account Details" in CRM UI(web) for a particular Account Group.
Can anyone help me how can we do this, since I'm new to CRM i'm unable to find the solution for the same.
Regards
AnilHi Anil,
Click on F2 in Web UI in the relevant field.
Get the Technical Details such as names
Component
View
Context Node
Attribute
Go to TX bsp_wd_cmpwb
Give the Component name and Enhancement set
Go to corresponding view.
Doubleclicking on view on the right side u get structure of the view.
Expand Context
then expand relevant context node
then relevant attribute
you can find the GET_I_ATTRIBUTE Method
method GET_I_ATTRIBUTE.
rv_disabled = 'TRUE'.
endmethod.
Check if rv_disabled = 'TRUE'
if then change rv_disabled = 'FALSE'.
Before seeting rv_disabled = 'FALSE' check the condition for which you want to make it disabled.
Regards,
Sijo. -
Posting Error: Field Pers.No. is a required field for G/L account
When I am trying to run the simulation posting run (PC00_M99_CIPE) then is getting an error that u201CField Pers.No. is a required field for G/L account 2275 504566872u201D
Field Pers.No. is a required field for G/L account 2275 504566872
Message no. F5808
Diagnosis
The value for field "Pers.No." in the interface to Financial Accounting is an initial value but you are required to make an entry in the field selection for G/L account "504566872" in company code "2275" linked to the field selection for posting key "50".
Procedure
It might be an error in the configuration of the G/L account field selection. The initial application, used to call up the interface must otherwise define a value for field "Pers.No.". If this is the case, contact the consultant responsible for the application used to call up the interface or get in contact with SAP directly.
Please help.First of all did you required to post with personnel number or not....if it is not required then goto FS00 enter your GL account 504566872....find Field Staus Group under tab Create/Bank/Interest........then goto t code OBVV and select your field status group then click on field status and select Additional account assignments and check personnel number status and change as per your requirement optional or required.
If personnel number required then create symbolic a/c with account type Q and assign gl account to this symbolic a/c.
Mohan -
Field Bline date is a required field for G/L account 1200 122400
While posting a Good receipt document using MIGO for a PO I am recieving the following error
Field Bline date is a required field for G/L account 1200 122400
Though both the document date and Posting date fields are filled with appropriate date.
The detailed message reads as follows, now my question is how to change the baseline date for the Cocd 1200 for GL account 122400
Field Bline date is a required field for G/L account 1200 122400
Message no. F5 808
Diagnosis
The value for field "Bline date" in the interface to Financial Accounting is an initial value but you are required to make an entry in the field selection for G/L account "122400" in company code "1200" linked to the field selection for posting key "81".
System Response
Error
Procedure
It might be an error in the configuration of the G/L account field selection. The initial application, used to call up the interface must otherwise define a value for field "Bline date". If this is the case, contact the consultant responsible for the application used to call up the interface or get in contact with SAP directly.Hello Ravinagh,
Heres what I did:
OB41> Double clicked on posting key 81> clicked on field status> Payment transactions> Both Due date and Value date have already been set to optional.
For OB14 it asks me to input a field status variant.
There are three of them. Now here is the tricky part, how do I find out which field variant has been assigned
0001 Field status for 0001
1000 Field status for CoA 1000
3000 Field status for CoC 3000
I went further and check for all the three variants one by one
and found out that in the field status> Payment transactions for the following entry in the field status group
G045 Goods/invoice received clearing accounts
The DUE DATE and VALUE DATE are suppressed. What do I need to do here?
Next I checked OBB8 to find the following three Options I dunno which one of them is applicable to the GL account 122400 for Cocd 1200. Where can I find the assignment? How can I find which payment term is being used.
PayT Sales text
Day limit Explanations
0001
0 Payable immediately Due net
0002
0 Within 14 days 3 % cash discount
Within 30 days 2 % cash discount
Within 45 days Due net
0003
15 Within 14 days 2 % cash discount
Within 30 days 1.5 % cash discount
Within 45 days Due net
Baseline date on 30 of the month
Entry 1 of 40
Well I went ahead and clicked on each of them
For 0001 the Default for Baseline date is set to Posting date (Do I need to change anything here?)
For 0002 the Default for Baseline date is set to Document date (Do I need to change anything here?)
For 0003 the Default for Baseline date is set to Posting date (Do I need to change anything here?)
Please guide me here. If you need screenshots I would be glad to mail it to you.
I hope you understood the scenario.
Thanks
Ron
Maybe you are looking for
-
I have two monitors. I have an application that I run all day, displayed on my secondary monitor. Whenever a popup windows is launched form that application, it always opens on the primary monitor. Very annoying. Any way to get the popup to launch in
-
Error message: local root folder does not exist
Greetings, I'm working on a MacPro 2x2.66Ghz, running DW from CS2 and through a strange combination of keyboard keystrokes while cleaning my keyboard yesterday I inadvertantly renamed my hard drive "-OX" from it's default. I can't seem to remember wh
-
How do I sort my whole spreadsheet based on one row?
I'm using Numbers on my iPad to inventory a school's computer systems. I'm kind of doing it slowly as I get time, so I'm not inventorying in any particular order. I just go in a room when I get a chance and then inventory everything in it. I have
-
Can I burn TV shows onto a DVD?
If I bought a show off of iTunes can I put it onto a DVD? Say I want to watch them in a DVD player is there a way of doing that?
-
Hi, I am trying assign settlement type AUC to the WBS element with category FXA(Fixed assets). But i am getting an error 'Enter Valid Value for Settlement type'. I can only see settlement types 'PRE' and 'FUL' , not AUC. since the Asset is defined as