Mini-DVI to VGA flicker with Snow Leopard and 2nd monitor

I have a 24" iMac (fall 2007) and recently purchased a 26" Vizio (VMM26F10I) and connected it as a 2bd monitor for my iMac using the Mini-DVI to VGA adapter Apple sells.
The new monitor will flicker now and then and some times will go to no signal. I have to change resolutions to something else and then back to standard setting to get it to come back or unplug adapter and plug back in.
Is there a fix for this?

26" VGA...? Which resolution/frequency? Have you tried a fresh cable with clean connectors, etc....
What did Vizio say when you contacted them with this question about your new purchase?

Similar Messages

I have a MacBook Pro 15" and my warranty just ran out! I partitioned my harddrive into two partitions, one with Snow Leopard and the other with microsoft.This morning I turned on my Macbook Pro and it will not boot into Snow Leopard.

Good Morning,
I have a MacBook Pro 15" and my warranty just ran out! I partitioned my harddrive into two partitions, one with Snow Leopard and the other with microsoft.This morning I turned on my Macbook Pro and it will not boot into Snow Leopard. I shut it off took out the battery, reinstalled the battery. Then I put in the Snow Leopard CD and booted up to disk utility and The Snow Leopard partion would not show up?? I do see the microsoft partion.
I also rebooted holding down the shift key and still no Snow Leopard
Could you please tell me what I can do, what keys do I press on restart any advice to get Snow leopard back.
thank you.

Have you restarted holding down the Opt key? That procedure should give you a gray screen with all of the partitions that exist. Then select the SL partition for boot. Also go to System Preferences and Startup Disk, unlock the lock and select the SL partition as the default boot partition, then relock.

Can't duplex print B4 paper size with Snow Leopard and HP8100N

Apple print drivers dumped the standard European paper size B4 (see ISO 216 for specs) many OS's ago, however, I was able to duplex print B4, which is a standard size for the HP8100 trays, using the HP Duplexing accessory, by specifying a 'custom' paper size (10.14 x 14.33). Now, with Snow Leopard and the 10.6.4 and the updated HP8100 print driver from Apple, I get the message "The Duplex Option, Flip on Short Edge" is not available when the destination paper is set to Custom."
It seems the easiest solution would be for Apple to bring back the B4 paper size--I don't know why they eliminated it. The next solution would be for Apple or HP (whoever is responisble for the print driver) to back up to whatever allowed duplexing of custom sizes in all recent OS's up to Snow Leopard.
I have thousands of pages of music to print and manual duplexing just isn't an option. Anybody have any work-around ideas?

try converting your cmyk doocument to rgb and then print

Continuing font encoding and tag issues with snow leopard and CS4oI

I am looking for help with a font handling issue with snow leopard and cs4 Indesign. Despite numerous calls and hours on the phone neither Apple nor Adobe has been helpful. I have had this issue open with Adobe since oct 5 but they remain totally unresponsive to date. I need to be able to use Type 1 fonts and do the following , export a pdf from Indesign with the following attributes: 1) xml tags for stories and objects. 2) have the fonts encoded as ansi and embedded.
Some additional information - exporting to ps is not an option as it destroys the xml tags. and doesn't guarantee that the fonts won't become CID or some other odd encoding.
As it stands now,
Leopard (10.5.8) and CS3 creates ansi encoded fonts with xml tags.
Leopard (10.5.8) and CS4 creates ansi encoded fonts with xml tags.
Snow leopard and CS3 creates ansi encoded fonts and xml tags
Snow leopard and CS4 creates custom subsetted fonts and some xml tags.
If any one has any advice on how to force specific font encodings from CS4 pdf exports so that i can preserve the tags and get the correct fonts I would be grateful.

The font encoding is not a function of the OS version, but rather of how a font is internally encoded and the content you are representing with the font.
If you are seeing a difference between MacOS 10.5 and 10.6 with the same Adobe software, it probably has something to do with use of a system font that is somehow different from one version of the OS to another. InDesign does not use any of the OS' font handling software.
Assuming that the fonts are embedded, subset or not, what is your issue with whether a font is ANSI-encoded, custom-encoded, or CID-encoded? It should make no difference for purposes of workflow beyond InDesign for software that adheres to the PDF specification (including all versions of PDF from 1.3 and up to 1.7 plus ISO 32000-1 PDF and all versions of PDF/X and PDF/A).
Neither InDesign or any other Adobe application provides user choices for the encoding since it shouldn't make a difference. The encodings chosen by Adobe's core technology components are for a combination of optimization and to support proper text search, copy, etc.
- Dov

I have a 27inch iMac with snow leopard and 1 user, and a 24 inch (older) upgraded to yosemite and 5 users. I want to wipe the 27 inch and transfer everything on the 24 to it. I do have time capsule 3tb but not sure how to do it

I have a 27inch iMac with snow leopard and 1 user, and a 24 inch (older) upgraded to yosemite and 5 users. I want to wipe the 27 inch and transfer everything on the 24 to it. I do have time capsule 3tb but not sure how to do it

Move your content to a new Mac - Apple Support

I used Roxio VHS to DVD for Mac (have iMac with Snow Leopard) and the audio does not synch with the video when playing in iMovie. Any suggestions to fix?

I used Roxio VHS to DVD for Mac (have iMac with Snow Leopard) and the audio does not synch with the video when playing in iMovie. Any suggestions to fix?

Thanks for the reply. I tried playing with detaching the audio in iMovie, but with 20+ hours of video to correct, it would take too long. After 28 hours, Corel/Roxio tech support replied that it is a known bitrate mismatch problem and they have no real fix. I strongly suggest not to buy this product.

Hi, I have Mac with Snow Leopard and was trying to purchase Lion , so I can move to I cloud, when trying to buy the app I get a message that a minimum 2gb of memory is required. I went check the hard disck info and it says available memory 20gb :-(

Hi, I have Mac with Snow Leopard and was trying to purchase Lion , so I can move to I cloud, when trying to buy the app I get a message that a minimum 2gb of memory is required. I went check the hard disck info and it says available memory 20gb :-(

Apple Logo, left hand side of the menu bar, About this Mac. It should be right there. If not then More Info, Sys Info.
But it would seem you don't have 2GBs installed and more then likely both RAM slots are already filed. So you just need to buy more RAM in a pair. That could be 2 1GBs chips or if your Mac can have more then that then 2 2 GB chips or 2 4GB chips.
Get your model # and go to Crucial.com and use their memory search to find out how much your Mac can have installed and the price for it. I suggest you install as much as it can take. Cost is very low on RAM these days.

HT201250 My 10.7.3 Time Machine won't work with external disks. Worked fine with Snow Leopard, and even Lion 10.7.1

My 10.7.3 Time Machine won't work with external disks. Worked fine with Snow Leopard, and even Lion 10.7.1
I have tried everything, even buy new external disk from different manufacture.
If I cant get a fix soon, I am downgrading back to SnowL.

Still no luck. I tried all the tricks, reconfiguring TM (remove selected disk option, and re-setting it, and trying different disks). Tried new combo updater, and the newer TM update after that. Tired two different disks too (one is my older firewire WD MyBook 1TB, and my brand new 3tb Seagate GoFlex USB... either one plugged into back of computer - no intermediary devices). I did get the TM buddy wiget and it produced the following log, from the last attempt, where I setup lots of exclusions so that backup quantity was small (under 10gb). Still it failed to complete. Here is that log, for what it is worth:
Starting standard backup
Backing up to: /Volumes/TM-Disk/Backups.backupdb
9.56 GB required (including padding), 911.15 GB available
Waiting for index to be ready (101)
Copied 0 files (0 bytes) from volume Mac HD.
Backup canceled.
To prove a point, I will take these disks are run them on my other Tiger and Snow Leopard laptops to prove TM works fine on those with these disks. But I fear the only options are to either have my tech re-install LION... or just have him reinstall SL instead. Im at wits end.

Using Epson Workforce 40 with Snow Leopard and an AirPort Extreme

Hi. Long night working on this but I figured something out, that might help others out there in the same/similar situation.
I have an Epson Workforce 40, and an AirPort Extreme. I had previously set up the EPWF40 (Epson WorkForce 40) before I had installed Snow Leopard. After installing Snow Leopard, the printer would not work and would not be recognized by my MBP 15". The document would just hang and I would have to force quit the printer or delete the document.
Bullet points on how I made it work:
- the most important thing is to have the printer recognized by the router and have an IP address installed and registered first, then you can install the Epson Mac EasyPrint software and "find" the printer over your wireless network
- Goto:
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=108743&prodoid=6307 5463&BV_UseBVCookie=yes&infoType=Downloads&platform=Macintosh&x=28&y=3
and download the Epson EasyPrint v3.10 file called: "epson12433.dmg"
- Unfortunately, Epson does not make software to "install" the printer to the router for Snow Leopard
- I re-installed the printer to the router using my wife's HP laptop and the original CD that came with the EPWF40.
- Follow the instructions on the CD for the install for "First Time" setting up the printer.
- After following the original instructions from the CD on her PC, the router assigned a new IP address to the printer, and the printer was "connected" to the router wirelessly
- Then, on my MBP running Snow Leopard, I ran the dmg file downloaded earlier from the Epson website.
- After running, go to the printer/fax preferences, click the "+" sign and add a new printer.
- As long as you are connected wirelessly to the router, under default, your mac should "find" the Epson printer. It is called something like "EPSON5A2EAA". There should be at least one, if not two options.
- One of the options should be "EPSON5A2EAA Bonjour" and the other "EPSON5A2EAA IP". Click on one, install it, and then go back and click on the other and install it (just to be sure).
- You will not be able to use the standalone Epson Apps installed from the DMG, however, the printer preferences for the epson, will be available through the printer preference boxes when you go through the system preferences.
It didn't make any sense at first for me either. Once I understood that:
- you can't install the printer from a Mac to your router
- after the printer is installed and linked with your router, your Mac can find it and use it
...I was able to complete the installation and have a fully functional wireless network printer.
Feel free to drop me a question. I'm just glad I was able to make it work.
-j

Sota Boy wrote:
I installed Snow Leopard but my Epson WorkForce 500 printer is not compatible. I saw an article about loading Rosetta and this would solve the problem. I can't find the article and I have never used Rosetta.
Actually, you have.
Rosetta was incorporated into both Tiger and Leopard. But it was invisible, of course. Snow Leopard is the first OS that offers the choice of whether to install it or not.
Any suggestions on how I find the recent article or make my printer work with Snow Leopard?
Don't know about the "recent article", but you can install Rosetta by inserting your Snow Leopard DVD and clicking on the Optional Installs package. When the configuration choice window comes up, just check Rosetta alone and carry on.
Good luck with it!
Archie

Dual Boot with Snow Leopard and Mavericks not possible?

I have a Early 2011 Macbook Pro with 2,3 GHz i7 Quad and two 512 GB SSDs (the secondary disk in an optical drive bay enclosure). This Macbook Pro can run Snow Leopard and Mavericks on the primary disk without problems. When I try to set up a dual boot system however, problems appear and it looks like it is not possible. When I start from Snow Leopard, I cannot select Mavericks as a start volume and vice versa. The error message says something like "Bless tool" cannot use this disk, i.e. unmount and boot from it. The problem remains when I exchange the disks (putting the primary disk in the drive enclosure and vice versa). When I put the secondary drive in an external case however, it is possible to boot from it - but strange things happen when the system starts: My computer clock is reset to 1/1/2001, WiFI passwords are not remembered for more than one session, disk permissions are reported as "repaired" but do apear as not repaired when I check them again - and other issues). I have verified both disks already and repaired permissions but that does not change the situation. So my experience is different from what is said in https://discussions.apple.com/thread/566781. It looks like the latest Mavericks cannot coexist with Snow Leopard on neiter a secondary internal drive nor on an external drive. This is strange since both disks and systems work flawless when run alone. Any suggestions to solve this problem?

When I check the Mavericks disk in the optical drive with disk utility after booting / running Snow Leopard on the primary disk I get som errors, see below ("disk utility Info"). So after all, I decided to erase the disk and install Mavericks new. But even erasing the disk is not possible when it is in the optical drive enclosure. I get this error message:
"Volume Erase failed with the error:
Could not unmount disk"
When I put this disk into an external case connected via USB however, it starts and runds MAvericks without any Problem. Same happens when I put thie Mavericks disk into the internal primary hard disk place.
"disk utility Info" when verinfying the secondary drive in the oprical bay:
Verifying volume “Samsung SSD Daten”
Performing live verification.
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Unused node is not erased (node = 40)
Checking catalog file.
Unused node is not erased (node = 30)
Checking multi-linked files.
Checking catalog hierarchy.
Checking extended attributes file.
Unused node is not erased (node = 8)
Checking volume bitmap.
Volume bitmap needs minor repair for orphaned blocks
Checking volume information.
The volume Samsung SSD Daten was found corrupt and needs to be repaired.
Error: This disk needs to be repaired. Click Repair Disk.
Verify and Repair volume “Samsung SSD Daten”
Error: Could not unmount disk

External HDD Issues with Snow Leopard and Time Machine

Hello,
I have a 1TB WD 10EADS External HDD, and it had some files on it. I connected it the other day to an iMac I recently upgraded to 10.6, and wanted to do a complete time machine backup of the computer to it (250GB HDD). I copied the files off the external HDD I needed and then Time Machine needed to format it as it was a FAT32 drive. This went successfully, and I started the Time Machine backup. This went quite slowly and failed after ~2.5GB or so. I restarted and tried again to no avail upon which Time Machine told me I should reformat it in Disk Utility. So I did, and to no avail.
I tried this a number of times and sometimes when doing a reformat I was told that the drive could not be unmounted. I tried manually copying files to the disk which started to work but then failed promptly with error (-36) and the message "The Finder can't complete the operation because some data in “ [Program/File Name]” can't be read or written." I upgraded to 10.6.1 also to no avail. I even repaired permissions and the disk, and booted Disk Utility from the Snow Leopard disc and formatted that to no avail.
I have read this is an I/O error and can be associated with bad drives, but as I stated before, the drive worked perfectly until Time Machine formatted it. I took the HDD to another Mac running 10.6, and it told me it had a POSIX error. I did some googling and found that if I format it under a Windows machine, and then reformat under the mac it might work.
What I want to know is, is this a 10.6 error or has the HDD decided to go kaput after Time Machine formatting it?
Thanks for your help

Thomas Huxley wrote:
Time Machine backup failed. I think it's a glitch with the computer, not the HDD. Going to zero out the drive now.
Any other suggestions on how I might bypass this error to get data onto the Disk eg. transfer over to another computer, so I can reformat the computer and install Snow Leopard from scratch? The whole purpose of doing this time Machine backup was to get all the files off the computer to perform a clean install of Snow Leopard.
I assume you're positive the TM disk has both the correct *Partition Map Scheme* (GUID) and Format (Mac OS Extended (journaled), but not case-sensitive)? One of them being wrong is the most common cause of a first TM backup failing.
Did you do either a +*Verify Disk+* (not permissions) or a +*Repair Disk+* (not permissions) on your internal HD, or only your TM drive? The message you got could be a result of a problem on either one.
Other options are to make a "bootable clone" via CarbonCopyCloner or SuperDuper. CCC is donationware, SD has a free version that will do it. If you do that, boot from it, and be sure everything works before erasing your internal HD. Google them.
Note that there are many, many reports of problems here with WD drives, and that some of them are not bootable.
I would not upgrade without backups (Murphy was an optimist!), but is there a reason you want to erase your HD? It's not required, and rarely does any good. The normal install will simply install Snow Leopard and remove Leopard. Your apps, data, etc., won't be touched.

Setting up Time Machine with Snow Leopard and MyBook World Edition II NAS

I have just successfully set up Time Machine on my MyBook World Edition II NAS. It's not so straightforward, and the information on the Western Digital support site is either unhelpful or flat-out wrong, so here's a post that will hopefully save people in a similar position a lot of time and frustration.
Here are the key facts:
1. The MyBook World Edition II NAS does support Time Machine -- if you upgrade to at least firmware Release 1.01.14 (9/29/09). See http://www.wdc.com/wdproducts/updates/?family=mbworld. Amazingly, the Level I support people at Western Digital told me that Time Machine is not supported! I had to point him to this link.
2. MyBook World Edition II comes with a built-in user, WD_Backup, which appears to be the only user that can be used for the backup.
3. Follow the instructions here: http://www.wdc.com/wdproducts/updates/docs/en/appletimemachine.pdf. BUT, what the instructions don't tell you is the password for that user, which Mac OS will ask you for during the Time Machine setup. On my device, it was "admin" but other posts say the password can be "backup" or "wd_backup."
4. Ignore some of the misleading statements in the Western Digital "knowledge base." For example, it says Time Machine is not supported. That used to be true but with the firmware update, is no longer true. Also, some instructions direct you to make a partition on your drive for Time Machine using Disk Utility. This is not possible, as far as I can tell, because the MyBook World Edition II shows up as a "share," not a "device" in the system, and therefore Disk Utility does not see it.
5. The reason I wanted to set up a partition, where I could limit the disk space, is that I read that Time Machine creates daily backups, with incremental versions of documents. Thus, the Time Machine backup will eventually fill up whatever space is given to it. Since I could not partition the MyBook World Edition II, what I did instead was to enable the "Quota" functionality and then put a disk quota on the WD_Backup user. I hope this will do the trick. (I have the further issue of having two Time Machine backups, one for me, one for my wife. How our Time Machines will battle it out for the disk space, I have no idea.)
I hope that the Western Digital people will create greater flexibility for Time Machine users in future firmware updates.
Anyway, hope this helped.

You do need to know that Apple may not support this: Here's the official word: http://support.apple.com/kb/HT1733 (Leopard) or http://docs.info.apple.com/article.html?path=Mac/10.6/en/15139.html (Snow Leopard).
You may be able to get it to work successfully, but there's no guarantee it will work well, or in the future.
From a post in another forum (found by V.K.):
The technical reason why Apple limits Time Machine to 10.5 AFP volumes appears to be to prevent disk image corruption. There were additional features added to AFP in 10.5 to support Time Machine. These presumably allow the disk image engine to force disk image journal data to write out all the way to the disk. Without such features, a network interruption can result in a corrupted filesystem on the disk image despite journaling. Remember, journaling relies on the journal being written all the way to disk before the changes take place. If you can't guarantee that (e.g., because of network/NAS buffering) then the journal is useless. Time Machine appears to rely heavily on disk journaling to deal with network drop-outs, interrupted backups, and the like. Take this away and your data is at risk.
If the NAS you are using supports these features it should report them to the OS and you should natively be able to choose that volume. If you have to trick the OS to use the volume it means the NAS does not support it.
To summarize: if you care about your backup data you should avoid using non-natively supported AFP servers.
That post obviously applies to Leopard; Snow Leopard appears to have added some requirements, that are also not supported by all NAS devices: some that were working with Leopard no longer work with Snow Leopard.
As long as you understand the risks, it's your call. But do yourself a favor and maintain some sort of secondary backup, such as a "clone" via CarbonCopyCloner or SuperDuper, or some other backup app. (Many of us do that with any backup app: no app is perfect, and all hardware fails, sooner or later.)

XServe with Snow Leopard and Mountain Lion Clients

Okay, bare with me, as I'm fairly new to the whole Mac Server world. I have learned a whole lot over the last year and I've been able to completely manage our 60 Snow Leopard Clients on our XServe.
Last year, I came into an existing setup with ~60 clients running Snow Leopard and an XServe running on Snow Leopard. We utilize Server Admin and Workgroup Manager to manage our user accounts and our clients. We have over 300 users and utilize Portable Home Folders with our accounts.
Over the last year, I've learned a whole lot about managing the system that is already setup. I've made quite a few preferences and file structure changes utilizing Server Admin and Workgroup Manager. After getting new hard drives in three machines, I learned how to re-image them and get them set back up with our Workgroup Manager. I learn things pretty quickly and have a pretty high technology aptitude.
So, here is the predictament I'm in now...our county just purchased 31 new Macs to add to our network. These are running Mountain Lion.
I have a few questions, and I'm not exactly sure where this post should have been. I think the major questions/issues I face right now include:
Will I be able to manage the Mountain Lion clients utilizing our existing server and Workgroup Manager?
We need our server to work seemlessly with the 31 Mountain Lion clients and the 60 Snow Leopard Clients.
Once I get one machine setup correctly, I need to create an image of it so that I can then utilize this image on the other 30 machines.
How do I create an image and then deploy it?
Do I complete this step before or after I have setup the first client with Workgroup Manager?
Also, am I missing something? I just want to make sure I'm not missing anything important in regards to getting these new workstations setup on our network.
Thank you so much for all your help! Any information you provide is much appreciated.

No, you don't need an new license.
But the Mac App Store doesn't allow you to download software, which you originally bought on DVD. Logic Studio is/was only available on DVDs, while Logic Pro, MainStage and Compressor are available in the Mac App Store as inidivdual applications.

Strange problem with Snow Leopard and Netware

Here is a strange one, but I am posting it here because I think it may have something to do with Apple software in Snow Leopard. I recently upgraded my Aluminum iMac to Snow Leopard, and have seen the following, rather puzzling behavior in the Prosoft Engineering client for Novell Netware. The symptoms are as follows. The server volumes mount OK, and I am able to see the files that are located on the server. In column view, when I select a file, I am able to see a preview of the file. Likewise, I can use Quickview to preview the contents of the file. However, when I try to drag a file from the server to my hard drive (any location), I get a dialog box saying I don't have permission to read that file. If I do a get info on the file, it says I have permission to read and write. For graphics files (such as Tiff, which have Preview as their default viewer), double clicking on the file causes Preview to open, but the file isn't opened. Now, what is really strange, if I use Photoshop CS1 to open that same file, it opens fine, and I am able to save it on the desktop, as usual. Likewise, if it is a Word or Excel file, they can be opened in their application, and saved on my hard drive. Does anyone have any idea as to what is going on, and how I can restore normal behavior?
Thanks in advance.

Unfortunately I don't know what's going on, but we're having the same issue at work on two Mac Pro machines. We installed Snow and everything's been running as good as before or better - except for this issue. One machine had a clean install and one had an update install, and both are exhibiting behavior identical in every detail to what you describe.
We've contacted Prosoft and they're looking into it; official word on their website is that Snow Leopard is fully supported.

Does Mozy back-up work with Snow Leopard and File Vault turned on?

I have SL and also have turned File Vault on. I am wondering if Mozy online back-up will work with SL and more importantly, will it work if I have File Vault turned on?
Thanks!

Mozy works with Snow Leopard just fine. However, FileVault isn't supported well yet. From the release notes:
"If you are using FileVault, please turn off automatic and scheduled backups in the Mozy preferences. You will need to initiate the backup process manually while you are logged in. We are working on a better way to support FileVault."
If you stay logged in all the time, Mozy will function properly. If Mozy runs a backup while you are logged out, it isn't smart enough to do the right thing. FileVault mounts a disk image for your home folder when you're logged in and unmounts it when you log out. This causes Mozy to think you no longer need those files.
"We are working on a better way to support FileVault."

Mini-DVI to VGA flicker with Snow Leopard and 2nd monitor

Similar Messages

Maybe you are looking for