Moving average price based on valuation type for material

Gurus help needed.
we want to maintain the moving average price of the material in the pricing, and this depends on the Valuation Type. We have 3 valuation types.
If valuation type is blank then one MAP(Moving average price) value will come and if nn one map will come and for nn one map will come.
We have copied VPRS conditon type to YVRP and changed conditon category as T( Moving cost).
But in pricing the YVRP price is not picking from valuation type which is blank.
Where can i make the settings to tell the system to pick the moving average price from the material master where the valution type is blank always based on the condition.
Do we need to creat a routine? If so is there any standard routine which we can use or make minor changes to it?
If it is a new routine please tell me how to start with VOFM?
Note : We need the value to come automatically from material master same as VPRS.

Hi
The first method is not to set the pricing condition VPRS as statistical.
Simply remove PR00 and it will work fine if you always use VPRS as your pricing base inside the pricing procedure.
VPRS will reads both prices based on the price control in the material master.
Price control S for standard price.
Price control T for moving average price.
It is this simple if you do not have any other "Prices" in the price procedure.
However, if you are using one pricing procedure where for some items you price using VPRS and some others using PR00, then you should use requirement routines to enable the correct price condition type at the right time.
The second method involves more work as you need to write a formula (VOFM) to get that information.
This is how it goes :-
1. Set VPRS to be the first step in the pricing procedure and to be subtotal B (as standard).
2. Set PR00 with alt. calc. type formula, which sets the value of PR00 to be equal to the subtotal B.
Step 1 VPRS statistical, subtotal B, reqt 4
Step 2 PR00 Altcty 600
With regards
baalakrushnan.da

Similar Messages

Moving Average Price does not get updated for Project Stock

Hello Experts
We have an Engineer-to-Order implementation for our client. Accordingly procurement is done per project. Each Project issues its PRs which are then converted to POs and recieved into Project Stock.
While assigning the material to the Network activity in Project (using material component) the system uses the price found in the material master (MAP or STD) as a planned cost appended to the project.
Problem:
while procuring the material, when we receive it into Project Stock (Mvt 101 Q + ) the Moving Average Price in the material master does not get updated. this way all newly created material master will never have a moving average price, thus whenever we try to assign them to the project we receive an error message (Cost for Material Component ###Mat.Num### cannot be determined.
Question:
How can I get the system to update moving average price (for all types of stock) based on procurement for project stock.???
Your help is kindly appreciated.

I'm sorry for the confusion
Case:
The T-code is CJ20N Project Builder in PS module
we are assigning material components to network activities under a certain WBS element in the project.
there is a function in the Project Builder to calculate the cost of a network. it uses the costing variant assigned to the network which is PS02 (We get the error here)
The costing variant has a valuation variant which lists a series of strategies to get the material price. Planned 1 if not then STD if not then MAP. (you can choose between many options via a drop down menu) you can choose 5 consequent options.
The MAP that the valuation variant is coded to get is the Plant Stock MAP -- Or the Project Stock MAP but only Per WBS element.
The MAP that the Actual postings update is the Project Stock MAP only Per WBS element.
This means that if you use a material component to purchase material 123 Acc.As. Q for WBS X for 10 $ then you try to assign a new material component with the same material 123 to WBS Y, the system will not get a MAP. because it's stored in QBEW per WBS element.
This way the system will never get the MAP right.
However, we don't always use project stock to procure for projects, for some requirements we can assign and use plant stock as well for Projects. that way we need the MAP from plant stock.
In the Valuation Variant you can use a User Exit Strategy. The user exit's name is COPCP005
My Suggestion is:
Use the User Exit COPCP005 to calculate the { Total value / the total quantity (MAP) from QBEW + Total value / total quantity (MAP) from MBEW } / 2
which is the MAP for both plant and project stock together, since that we are going to use both.
Q: Is this correct !?

Moving average price based on date range, site and article.

Hi ABAPers,
I am working on SKU wise sales report. Based on user input of date range ,site and article I fetch data from VBRP table i.e., (billing data from stores) . I have searched a lot to find MAP but dint get convincing solution.
I tried to get data from MBEW-VERPR but that doesnot give MAP for a given date. I also tried with condition record table and KONP table but not helpful.
I also got to know about s031 and LIS configuration I am not sure whether functional consultant should do the changes.
Kindly help me in obtaining the MAP for particular bill date, article and site(store).
Regards,
Dep

You can found the moving average price in MBEW (current) and MBEWH (history table)
The first goods movement after the period closing program updates the period in MBEW and writes the data of the previous period to table MBEWH
- If you actually need map on a daily (or less) basis, you will have to calculate it from MBEW, MBEWH, MSEG and BSIM (...)
- You could also look for the actual cost in MSEG related to records of VBRP.
Regards,
Raymond

Valuation Type for Material

Hey Guys,
How do we check whether split activation is activated for the material. And if its activated, how do we configure it?
Thanks a bunch

Hi Ryan
1. to check if split valuation is activated
please use the T code OMW0
here you can see if the split valaution is acatiavte in you system
2. for the material you can go to T code then in MM60 reprot you can see the different valuation types ( or split valuation types )
for configuration of split valaution please refer below
link:[http://www.sap-img.com/mm025.htm]
link:[http://www.sapficoconsultant.com/Bonus/Split%20Valuation%20configuration.pdf]

Valuation Type for material proposed in PR

Hello,
For a material with valuation category for split valuation, and purchase requisitions created from MRP through reorder point, I have niticed that when there is a source list with a fixed vendor, and an info record with this vendor, that contains a valuation type, this valuation type is not transferred to the relevant field in the PR (Purch Requisition), when PR is generated from MRP. Also , the info record info is not filled in the MRP-created PR, but only the fixed vendor.
So, is it so that the valuation type is not coming from the info record, in this case? Is it manually, the only way to fill up the valuation type in the Purch requisition?
Obviously, valuation type is later maintained in the PO phase, but I was wondering which are the possibilities in the PR.
Anyone that has knowledge, on that, will be welcome.

Hi Piyush,
Your answer is correct. Val type does not come from info record to MRP created PRs, even there is a fixed vendor in the PR, coming from source list.
But, this happens in the PO, that val type is an obligatory field, for a split valuated material.
In PR, it can only be maintained manually, I guess.

Moving average price (MAP) became Zero(0) for one material

Gurus,
Please tell me what could set MAP to zero for a material?
Thanks,
Kishore

HI,
Please check whether any body has transferred material from on location to another free of charge ot at the price 0.01,
as the MAP will be become zero by two reasons
1) any user have made the GR or Invoice for that material for at 0.01 price.In case of several invoices with too low a price the total value can reduce to such an extent that the MAP goes towards zero
2) or you may not have any stock in your location's.
please check the MB52 repost whether any body did for 0.01 price for that material , you can increase you MAP with Transactions MR21/MR22 ,increase the price/stock value again - if required.
Furthermore, you can define tolerance limits in the Customizing for the MAP price variance (Transaction OMC0, tolerance key VP) this is for your precautions in future.
PLease see the previosu forum post on MAP they might help you in your scenario.
Regards,
Ninad Kshirsagar

Return goods will impact the Moving average price?

Hi,
When stock of a material is low,and we return the goods to our vendor from po(movement type 102), the Moving average price may change very large.for example, stock:11 PC, Moving average price:1;return qty(with po 102):10PC,return price:0.5,then the Moving average price bacome to 6. I went movement type 102 can't impact the Moving average price, is it possible?
Thanks.

Hi,
This is not possible. As the name indicates, it is the Moving Average Price. When you receive goods / return goods, the system will take it into accoutn & change the MAP accordingly.
Regards,
Prashant Kolhatkar

Updating the material moving average price in return to vendor process

Hello,
Our finance department is saying that the affect on the moving average price in our return to vendor process is wrong.
At the moment the moving average price is changed according to the material price in the return PO.
Our financial department says that the moving average price shouldn't be affected at all by a return to vendor.
Can someone tell me how to customize the system according to this request?
Thanks,
Sivan

Dear Friend,
In COOIS Report or MB51 report, Select the list as Documented goods movement and in production order field give the production order number and execute. After executing, if any goods receipt has been done for the same than system will show the same with these it will also show the value of the same. If its not showing than go to change layout and select the same.
Thanks and Regards,
Jitendra Chauhan

Stock of material and moving average price for each valuation type

Hi
Is anybody aware of any standard report which will show the stock of material and moving average price of the material for each valuation type.
M5BL is one report but would like to check if there is any other report.
Regards
Vaibhav Mahajan

Hi,
Check MB52, select 'Display batch stock' option.
Batch is nothing but your valuation type.
You can see those details there.
Regards,
Piyush

Moving Average Price for Non-Valuated Material

Hello Experts
The question may seem to be quirky but need your advice for the below.
My client is buying non-valuated material against a cost center, they do not want to keep the stocks valuated. No value update only quantity update. The accounting documents are the following when the GR is done by receiving folks
Qty of material XYZ goods receipted = 10
Debit     Consumption GL   12345678       10 USD          Cost Center ABC123 (This is a warehouse cost center)
Credit    GR/IR account                            10 USD
Qty of mateiral XYZ issued = 5
The goods are later on issued to Production cost center and the client was the below entries to be passed with MOVING AVERAGE PRICE.
Debit    Consumption GL 12345678           6 USD          Cost Center ABC456 (This is production Cost center)
Credit   Consumption GL 12345678           6 USD          Cost Center ABC123 (This is warehouse cost center)
I am aware that as this is a non valuated material the above entry is not possible. Maybe, I will use BAPI_ACC_DOCUMENT_POST for the generating the accounting document when the goods are issued from warehosue to production center.
My question is how can i get the moving average price.
Regards
Chokkalingam Pillai

you can have an accounting view for non-valuated materials, this helps for example with purchase requisitions as they could take the valuation price from the material master and the user does not need to enter a valuation manually.
But the material master moving average price cannot be calculated and updated automatically, as it is not foreseen in any standard program to do this for cost center procurement, since SAP only calculates a MAP for valuated stocks.
Further it is not logical to issue non-valuated stock valuated (even with a different price) from cost center to cost center.
It looks like you want to have a kind of internal billing for warehouse services, as you end up with a negative amount in the warehouse cost center which is then the profit.
Why don't you just create a report to run at the end of the month, listing all goods issue movements with their cost centers and taking the price from last PO (or from material master if you decide to maintain it manually) and use this for a manual cost center posting in CO module

Moving average price of subcontracted material not picked for Cost estimation

Hi Experts
I have the below scenario:
Finshed Product A has components B, C.
C is a subcontacted material and it has its own BOM with components D & E.
We are maintaining moving average price for the subcontracted material C, (because the subcontracter is adding X & Y in addtion to the components D and E, which are sent from us).
In the mateial maste of C, Procurement type is F and Spl. procurement type 30 are maintained.
When i do costing for the Finished product A, moving average price of C is not picked up (where as system calculates the std cost for C by adding the values of D & E and purchase info record price).
Is there any way to Calculate Price of A by using the mvg avg price of C.
I maintained the below valuation variant settings.
If i remove the spl. procurement type 30 in the material master of C, it picks up the mvg. avg price. but it affects the MRP planning of items D & E.
Please advice.
Thanks in advance.
Regards
Bala

Hi Big choi
Thanks for your response.
I understand.
1. if we maintain spl. procureent key 30, system calculates standard cost based on raw material and service charges.
2. If we don't maintain spl. proc key, it considers the material as purchased and picks the mvg avg price from material.
But, is there any way to pick the moving avg price from material master eventhough i maintained the spl. procurement type 30?
Thanks
Bala

Does moving average price work with multiple valuations?

Dear All,
I have activated multiple valuations: Legal, group and profit center.
I have activated ML/Actual costing for this multiple valuations too.
Now I have 3 price fields in material master.
Could I use moving average price for some materials types in multiple valuations?
Thank you,
With best regards,
Kamila.

Hi Kamila,
yes, ML is always activated for all materials in a plant. To use MAP you have to set the price determination of a material to '2':
This is the F1 help of the field price determination:
Material Price Determination: Control
Specifies how the material price determination should procede.
You have the following options:
With price control V in activity-based material price determination (indicator2 in the material master), the moving average price is calculated. With price control S, the material is valuated with the standard price and the moving average price is calculated for information purposes.
In single-/multi-level material price determination(indicator 3 in the material master), the valuation price (standard price) remains unchanged and a periodic unit price is calculated for the closed period.
This option is only for materials with price control indicator S,and is only recommended if in addition to multiple currencies and/or valuations, you use single-/multi-level material price determination.
In single-/multi-level material price determination, a periodic unit price is updated for information, but it can only be used for material valuation in the closed period.
Dependencies
The indicator is only of use if the material ledger is active.
Upon activating a valuation area for the Material Ledger in Customizing, you can enter what type of material price determination will be proposed when creating a material in that valuation area. This proposal will be ignored at production startup: the system automatically sets the indicator to 2 in the material master for all materials present.
If you want to change the indicator for a particular material later, choose Accounting -> Controlling -> Actual Costing/Material Ledger -> Environment -> Change Material Price Determination.
best regards,
Udo

Changing of Inventory Valuation: Standard to Moving Average Price

I work at a service-based company and have also been asked to research the impact involved with switching our inventory from standard price to moving average price.
Scenario: Change material type TRAD (trading goods) from standard price to MAP.
Process: Change settings in SPRO at the level of u201CDefine Attributes of Material Typesu201D. Currently, this is set for u201CStandard priceu201D with the indicator u201CPrice ctrl mandatoryu201D set. Upon change to u201CMoving average price/periodic unit priceu201D, Iu2019m thinking I need to de-activate the u201CPrice ctrl mandatoryu201D field so any current materials with an u201CSu201D in the Price control field on the Material Master Accounting 1 tab can be changed to u201CVu201D. Is this correct? Also, is there a program that already exists to mass update the Price control field on the Material Master? If not, I was looking to create a CATT for this changeu2026.any other ideas? In some of the forum posts it was mentioned to use t-code MR21 however, even with the u201CPrice ctrl mandatoryu201D field de-activated, the Price control column is grayed out.
It was mentioned in a previous post that all open documents (PO to IR) need to be completed before changing the price control setting, at what point does this stop the process? Does SAP generate a system error message?
Also, any suggestions as to when this price switch is best to take place like after inventory?
Are the above mentioned areas the only areas I should be concerned about or am I missing some areas that should be addressed?
P.S. We do not use have our ML (material ledger) activated or use split valuation.
Thanks~
Dawn

Hi,
If you want to change material from standard to moving average price, Follow the below process
1)first the material quantity and value should be zero
2)if you want to keep value and quantity and want to change price control in future you have to create new material with price control "V' and lock the previous material for posting.
Regards,
Sreekanth

Moving Average Price for Sales stock and Project stock of a material

Hiya Gurus,
                 I am developing a report to display inventory details. My requirement is that I have to display the Moving average price of a material for all Valuation type. I also need to display the Moving average price if a material has got Project stock or Sales stock.
                 In MBEW table I can get the Valuation type and its Moving average price, but how can I find the moving average price for the same material if it has got Sales stock and project stock. Please let me know the table and field where I could get the relevant data.
                Kindly help me on this, it would be deeply appreciated.
Cheers,
ZIa

Hi
can you look at tables
EBEW                             Sales Order Stock Valuation
QBEW                             Project Stock Valuation
Nat

Moving Average Price for Batch Maintenance

Hi Experts,
      I've created material of which stock is maintain in batch (Valuation category = X & Price Control = V).
    Due to batch wise stock, system calculates the moving average price for different batches.
    Can we calculate moving average price at plant level inspite of maintaining material batch wise?
   Is there any other way by defining multiple storage bins for that material so that I can see the stock value differently with single moving average price value?
   Thanks.
                                               Naimish.

In MM03, you get the overall MAP for all batches of the material at plant level without mentioning valuation type in org. level. When specific valuation type is given, you can see its MAP / std price.
Hope this clears the doubt.
Regards,
SAmeer

Moving average price based on valuation type for material

Similar Messages

Maybe you are looking for